Problem with M30 power indicator

Similar Questions

• Problem with Toshiba Power Saver Tecra S1

  Hello

  I have problem with Toshiba Power Saver (GST).
  I installed SP2 on my WinXP Pro, and after this operation, all works well. After a few days GST on icon disappear from the task bar. When I open the Console from Toshiba, then GST I can see only incomlete standard dialog box. There is no configuration icons, but initially were, and I set all the settings. Now, there are 4 black boxes (2 small as a small icon) and 2 large as icon bigest at the bottom and a large black on the right.
  I try to reinstal GST, but it had no effect.

  Can someone help me

  Alex

  Hello Alex

  I have never seen anything like it. There is obviously some problems that doesn t allow the graphic illustration of the ATP. The first step is always reinstalling the software. I don't know what you need to do exactly. In my opinion, you should try to remove the GST and SP2. Install SP2 again and after this GST.

  If there is not the worst success solutions are preinstall the device using the recovery CD.

• I am facing a problem with the POWER of ODIN 9.1.0.5, my broker is Indiainfoline, my OS is Vista ultimate, when I login, everytime I get an error 'System Error (10055) (setsockopt)'.

  I am facing a problem with the POWER of ODIN 9.1.0.5, my broker is Indiainfoline, my OS is Vista ultimate, when I login, everytime I get an error 'System Error (10055) (setsockopt)'.

  Check out these links:

  System (10055) error (setsockopt) Solution
  http://www.win7heads.com/software/82898-system-error-10055-setsockopt-solution.html

  ODIN request does not work Windows 7
  http://social.technet.Microsoft.com/forums/en/w7itproappcompat/thread/ddbe30c8-f4c6-4B8F-ac91-85aa07191ea3

• (Redirected) problem with the power supply on Alienware X 51

  I have a problem with the power supply. I can't run all the games with good graphics, if I try to run any game, my PC turns off and a small lamp on the power supply shuts down. It began a week ago, and before it was normal.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Problems with the Power Manager 1.51 new T60 has

  I've updated Power manager version 1.51 has and I have problems with the gauge of Power Manager in the task bar. Life remaining battery is not updated once more. Is there any chance I can find an earlier version of the software that worked perfectly before? Or there is a method to solve the problem?

  Sincerely,

  Nikita Septucha

  
  

• Satellite L40 - strange problem with battery LED indicator

  Hello

  I have Satellite L40 - 18w and I have a problem. When the battery is low or that he is in charge of the led is orange, but when it is fully charged there is no led indicator. Even if I turn it on, there is no light and if I check the power connection options AC adapter is recognized. Operating system is Windows XP PRO SP2. I tried to find the Toshiba Power Saver, but it seems that he can't stand L40.

  Would it be a hardware or a software problem?
  Thank you in advance for your help!

  I had the same problem.
  Remove and install back the battery.

• I'm having a problem with my power supply options, no matter what I do, it goes automatically into mode standby a few minutes running.

  I keep changing power options, even the one who always says, but this isn't help even when I restart after setting up things. It will just automatically to stand-by after a few minutes, no matter what I do, most of the time and not always. so it happened me really confused as far as what I need to do.

  Hello

  You did changes to the computer before the show?

  Method 1:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756
  (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows
   
  You can check if for a network card power management is disabled.

  How to disable for a network card power management when you deploy Windows XP

  http://support.Microsoft.com/kb/837058

  Method 2:

  Log on to the computer manufacturer website and update the latest drivers for chipset, BIOS (Basic Input\Output System). Also, look for other updates to the device driver.

  Reference: How to manage devices in Windows XP

  Note: Update of the BIOS can be a complicated process, and if an error occurs, your computer could be rendered unusable. Be sure to observe the instructions of the manufacturer.

  You can see the following article for more information:

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

  Let us know if it helps!

• problem with the activity indicator

  Hi, I can show activity indicator. But the problem is that I do not know how to deal with another task. I have a screen that show activity indicator and then the application displays this screen is run an initial process to build the database in the SD card. I tried with a thread, but did not work and I have seen other examples, but without success

  Thank you

  You might find this useful:

  http://supportforums.BlackBerry.com/T5/Java-development/sample-quot-Please-wait-quot-screen-part-1/t...

  Look for the update in the commentary.  I think the approach that corresponds to what you are looking for.

• P10 554: problems with display power management

  It is not possible to reactivate the display (mouse movements, pressing certain keys, pressing the key) when it is turned off by the power management system. The motherboard has already been replaced by a service representative Toshiba, I even reinstalled the system, but the problem persists. The behavior is not reproducible. Sometimes it works, sometimes it doesn't.

  Anyone out there have the same problem? Is this a configuration problem or may be a hardware defect? It is already a known issue?

  Any ideas appreciated.

  Thanks in advance
  Karl Jost

  Hi Karl

  It is not easy to say, but it is possible that there is some malfunction of the equipment. In my opinion the last try to check this is to reinstall the operating system. If the problem persists there are certainly a hardware problem.

  Good bye

• Problems with the power of the Xbox 360 WRT54G signal

  Here's what I have high down.

  ActionTek GT701 (Qwest 7.0Mbps)

  Linksys WRT54G

  Reference Dell 530 (wired)

  XBOX 360 Arcade (wired)

  XBOX 360 Elite (wired)

  Printer Dell Wireless (wireless)

  Dell Dimension 2350 (wireless)

  I started with an xbox connected to the linksys router and had the excellent signal (HD quality) for Netflix strength. I added the second xbox and was still five bars of signal strength. About three days ago for netflix on the xboxs signal strength is only cut up to two bars. The rest of the House working at full power, but I can't get Netflix on the xboxs back to what is a. I tried to reset the two routers, by disconnecting and then changing the port to the xboxs, upgrading the firmware for the router and finally tried just an xbox connected both. (not in that order)

  I contacted Netflix and thay make any change on the end there, no changes have been made by my ISP.

  Xbox live is running at full speed, I'm not able to get the strength of Netflix.

  Any help is greatly appreciated. We use no cable, and that's how my family watches TV

  Just a note speedtest .net - downstream - 6: 19 (average of 3 tests)

  Upstrem-. 69 (average of 3 tests)

  If the X - Box is connected by Ethernet, then, change the wireless channel wouldn't make any difference. I suggest to update the firmware on the router, reset the router and reconfigure go to zero and then check the signal strength.

• Is anyone having problems with their power settings in Windows 7 RC?

  When I leave the computer to turn off mode standby, the screen remains on standby to try to wake the computer.  I had to reboot the system to get the screen to wake.  Everyone knows about this problem?  It is an old computer that I use to test various programs, crash and not reconstruct my main system.

  Dell Dimensions 8200 reference:
  Pentium 4 2.4
  1 GB RAM
  ATI 9700Pro
  Samsung SyncMaster 912n

  Hi all

  I found this in another forum.  I suggest you try the following.

  Control Panel / hardware and sound / Power Options / change the parameters of the Plan / change advanced power settings.  Find the parameters of the material sleep like Wireless, PCI Express and hard as well as the things you don't have in your system under "change settings that are currently unavailable" and disable them.  These are the usual elements who do not return from sleep mode.

  Thanks to rkrisher

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/8ef43b85-8173-433D-a2d3-f4f2bd5b99c1 Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a problem with the Power Point Viewer.

  I try to install PowerPoint Viewer on my laptop (Win 7 64 bit), but the installer says it cannot install the program because it lacks oart.dll. I tried to copy this file from my desktop to the laptop computer, making sure that I copied it to the same location as on my desktop, but I still got the same message.

  Helps to solve this problem would be appreciated.

  Thank you and best regards,
  Roy

  I have re downloaded the installer from the Microsoft Download Center and installed without any problems.

  Kind regards

  Roy

• I have a problem with the power off of Microsoft Security Essentials.

  Original title: cannot close Microsoft Security databases

  I have a malware called yellow Moxie and I can't seem to go in... I need to know how to disable Microsoft Security Essentials to clean malware off the coast.   Is it possible to temporarily suspend protection?

  Try to start in safe mode with network, then scan with the free version of

  http://www.Malwarebytes.org/products/malwarebytes_free/

  If no repost of joy for specific groups of viruses

• 7535 notebook has always had a problem with the power supply fitting loosely in the computer now

  My 7535 laptop has always (from the initial installation) had a tenuous when plugging in the adapter.  Most of the time I had to move the entry or causing some kind of tension to keep it connected.  Now it doesn't connect at all... I even ordered a new adapter, but it's certainly the computer.  Is there a way to fix this?  I was not able to use my computer for more than a week now waiting for the new card but still not be able to connect and the battery is almost gone.

  I appreciate any help or suggestions.

  the repair is service call

• Problem with power settings during the opening of Windows Media Player 12

  Original title: power options Windows Media Player Exchange

  WMP 12 of opening causes the power option for monitor turn-off time to return even if the time is 2 hours 15 minutes. Tried to reset the value, value save, all electrical energy plans by making the same, nothing is done.  Other set values, for example disk hard turn off (never set) will be defined and stay together.  Would have someone seen this kind of thing?   Operating system is Win7 Professional 32-bit.  All available updates have been installed.

  Hi Jim,.

  Please contact Microsoft Community. I understand that you have a problem with the power settings when opening Windows Media Player 12. I've surely you will help solve this problem.

  To better understand the issue, I would need more information on your side.

  1. The problem only occurs when Windows Media Player is opened?
  2. Did you the latest changes on the computer before this problem?

  This problem might have occurred because of these reasons:
  1. incorrect power settings.
  2 conflict between third-party applications.

  I suggest you try the steps listed here and check if it helps:

  Method 1:
  Run Troubleshooter of power that will check if the basic power settings are set properly or not.

  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2:
  If the problem persists, restore to the default settings for power management. Check if it helps.

  Note: try the following steps only if you have not tried before.

  Step 1:

  To restore to the default settings power management, follow these steps:

  1. Click Start.
  2. In the search programs and files box, type cmd.
  3. Right click on CMDand then click run as administrator.
  4. At the command prompt, type powercfg - restoredefaultschemesand then press ENTER.
  5. At the command prompt, type exit to exit the command prompt.
  6. Restart the computer.

  Step 2:

  Once the plan of power reset by default, you can create a new power plan and the same customize according to your needs.

  Power plans: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/power-plans-FAQ#1TC=Windows-7

  Method 3:
  If the problem persists, set up the computer in a clean boot state, and check if that helps. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows:
  http://support.Microsoft.com/kb/929135/en-us

  Note:  After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.