P2V failed to get the hardware information for the selected computer

Similar Questions

• Failed to get the selection in the selector column view obiee 11g

  Hello

  I try to select the perticular in coumn value mode switch. I don't have the values in the selection. I followed this link

  https://www.YouTube.com/watch?v=tedjkOzPab0

  Plese see the capture screen.

  In this product, doesnot show all results.

  is necessary change properties to view the values?

  

  

  Please help me.

  Thank you and best regards,

  A.Kavya.

  in this link the views column selector also works as a guest of table

  Sorry, but you will probably have to watch the video once more as the column selector will never serve as a row in the table, and in the video it does not display the values in the columns but only the names of columns selected in the column picker.

  This thread was not already answered? The brand went...

• Impossible to get hardware information for the selected computer

  Hello world

  I need to convert a .vmx ESXi 5.5 machine. I use VMware vCenter Converter Standalone 5.1.1.

  I have this error: failed to get the hardware to the computer information selected

  
  

  Before copying the files (VMs), I stopped the VM and I did not include snapshots.

  Thanks for your help!

  Specific error should be found in the converter-worker newspaper, could you upload log-bundle?

  Also, you should make sure that the user running the user interface that has sufficient rights on your VM.

  HTH

• Failed to get the disk partition information when you add the new data store

  Hello

  Update my ESX to version 4 Update 1 (4.0.0, 256968). Now, I'm trying to add a new data store to a cluster in vCenter and receive the following error message when I will review the current structure of the disc "error when configuring the host: failed to get the disk partition information. When I click back, then next, there's no error message but in the formatting window, I get the error "Object reference" not set to an instance of an object.

  I see this question has been asked before, but I can't seem to find an appropriate response. Anyone? The interface using CLI instead of vCenter isn't an option (alignment VMFS, workload and so on)

  I use Dell R900 with an EMC Symmetrix VMax SAN

  The size of the LUN I want to add is 741 GB

  Concerning

  Marius Aulie

  If you have a virtual machine for Windows test, you could do the following, to ensure that the logic unit number has a clean partition table:

  -set the LUN as a GROSS physical to virtual machine device

  -Run diskpart, select the drive and run the CLEAN command

  -detach the LUN to the virtual machine

  -try to create the data on the LUN VMFS store

  The size of the block of the data store where the VM test can be a problem with the above. Due to the size of the LUN, the size of the block of the data store must be at least 4 MB. Attach the LUN to a physical test system could be an alternative.

  André

• Can't mount NFS share - operation failed, diagnostics report: failed to get the path console for volume

  I'm trying to mount a NFS on ESXI 6 volume, but continue to operate in the error.  Googling everything nothing helped, so I'm here. Error:

  Call "HostDatastoreSystem.CreateNasDatastore" of object "ha-datastoresystem" on ESXi '192.168.xx.xx' failed.

  Operation failed, the diagnostic report: failed to get the path of the console for the volume, the name of the sample.

  The NFS share is located on a synology nas. I checked the permissions and configuration. Everything seems correct based on the various boards and KB articles.

  Ideas?

  Thank you.

  Find the esx.conf file in/etc/vmware.

  If you could also share a copy with me...

  Try to mount the NFS VMware KB: Volume fails with the error: could not resolve the host name

  Check the link as well below.

  http://www.Bussink.ch/?p=1640

• Failed to get the status of printer/bizhub Konica Minolta C654e

  Failed to get the status of printer/bizhub Konica Minolta C654e

  Cannot print from my Mac.

  With the limited information you supplied I would check the configuration of the print queue. If you open information system (located under Applications > utilities), you will see a column on the left and if you select printers the right pane displays the print queue information. Note If you have multiple printers, you can select in the right upper pane to view its information in the bottom right pane. Can you copy this information and paste it here.

• response of psr tmadmin: failed to get a temporary file for writing

  Hello

  I have a problem with my local Tuxedo instalation. My servers and services works fine but when I try to list them using psr (printserver) or printclient tmadmin response: pg: failed to get a temporary file for writing. Can you tell me where can I find the possible cause?

  Thank you,.

  main problem was no space in /var. thank you for your help.

• com.sun.messaging.jmq.admin.apps.broker.BrokerCmd failed to get the exit code of the child.

  I use D:\MessageQueue4_5\mq\bin\imqcmd.exe to get heads of JMS queues. In most of the facilities, I can retrieve the results without problem.

  At a single facility, however, I get an error when you try to run this command. Called with no arguments, it should display a list of available commands. But that's what I get instead:

  D:\utilities\imqChk > d:\MessageQueue4_5\mq\bin\imqcmd.exe

  Boot process failed.

  Could not run

  Java

  -cp

  d:\MessageQueue4_5\mq\lib\imqadmin.jar;

  d:\MessageQueue4_5\mq\lib\fscontext.jar

  -Dimq.home=d:\MessageQueue4_5\mq

  -Dimq.etchome=d:\MessageQueue4_5\mq\... \etc\mq

  com.sun.messaging.jmq.admin.apps.broker.BrokerCmd failed to get the exit code of the child.

  Other info:

  • Java is installed (version 1.7.0_17).
  • QBrowser using, I can sign in successfully and retrieve information from queue.
  • All of the named files and jar files are where they are supposed to be within the meaning of the doce above.

  I was not able to locate the source of the problem. Any ideas would be greatly appreciated.

  Thank you.

  I had this same problem and solved by editing the file \glassfish3\mq\etc\imqenv.conf manually by setting IMQ_DEFAULT_JAVAHOME as follows:

  IMQ_DEFAULT_JAVAHOME = / Files/Java/jdk1.7.0_45 program

  Note the orientation of the slash. It's on Windows, and when I used with Windows style slash escape sequence, it does not solve this problem only when I used the mangled Unix style done.

  Hope this helps,

  -Noah

• Exception while trying to get the selected value for the choice of SelectOne in ADF Mobile

  I added the following code after arriving through this post https://forums.oracle.com/thread/2536419

  DCBindingContainer dcBindings = (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

  DCIteratorBinding iterBind = (DCIteratorBinding) dcBindings.get ("facilitySelectItems");

  Attribute String = (String) iterBind.getCurrentRow () .getAttribute (0);

  But Jdeveloper complained class BindingContext wasn't available and I get the jar file adfm.jar has not been added to the project. I added it manually the path C:\JDeveloper11r24\oracle_common\modules\oracle.adf.model_11.1.1\adfm.jar. Once I've deployed code on an android emulator, I get the below error. Can someone please?

  07-25 13:18:03.812: D/CordovaLog (869): [SEVERE - oracle.adfmf.framework - adf.mf.internal - logError] request: {classname: oracle.adfmf.framework.api.Model; method: evaluateMethodExpression; params: [0: #{pageFlowScope.IBCMSearchBean.getSearchParams}] [1:] [2: {}] [3:] ;} exception: {message: oracle/adf/model/binding/DCBindingContainer (unsupported major.minor version 50.0); the severity: ERROR; .Guy: oracle.adfmf.framework.exception.AdfException; .exception: true ;}}}

  The version of the compiler maximum the JDev shows that 1.4. And I'm using version 11.1.2.4.0 for JDeveloper. The JDK version is 1.6.0_24.

  Sorry I missed the question!

  First of all, to get the value of selectedItem in selectOneChoice do not have another function in the domain controller. Here is an excellent article by Frank that explains this. Or you can use the below function to get the selected value immediately. Here the market is the value of selectOneChoice attribute. I wasn't aware of this method until you have read this article.

  {} public void getAndSetMarketValue (market of the object)

  ValueExpression ve = (ValueExpression) AdfmfJavaUtilities.getValueExpression ("#{bindings.marketSelectItems}", Object.class);

  AmxAttributeBinding attrBinding = (AmxAttributeBinding) ve.getValue (AdfmfJavaUtilities.getAdfELContext ());

  access the iterator that populates the list of values in

  the selectManyChoice component

  AmxIteratorBinding amxListIterator = attrBinding.getIteratorBinding ();

  the AmxIteratorBinding is a wrapper for the BasicIterator

  iterator which sets out the information we need

  ListIterator BasicIterator = amxListIterator.getIterator ();

  for each index value, query the name of the service (you can

  access and attribute from the line) to display

  SelectedValue = string

  (String) listIterator.getAttributeValueAtIndex (((New Integer ((String) market))) .intValue (), "Value");

  }

  Second, you can use #{row} in commandLink's action since it is something that is evaluated when the user clicks on the link and we do not have access to #{line} after that the entire component is rendered. To remedy this give an action for the commandlink which is a function in the bean and the function of bean back to the action of the link selected.

  ListOfReports.amx

  .......

  .......

  LoginBean.java

  ......

  public String returnClickValue() {}

  Option of string = AdfmfJavaUtilities.evaluateELExpression("#{viewScope.selectedItem}").toString ();

  return option;

  }

  ......

• Failed to get the connection-; First exception is: java.lang.NullPointerExceptio

  Hello:
  
  When I got to connection requests, click any OAM following errors. All forms are good.
  An error has occurred!
  Failed to get the connection-; First exception is: java.lang.NullPointerException
  
  I don't know when it started to be like that, but I applied a few patches yesterday. Thanks in advance for your help.

  Salvation;

  You don't need to check the log file. Check the log file for details of the error apache.

  By the way you are trying
  1. close apps services
  2. run autoconfig on dbtier that
  3. run autoconfig on appstier and make sure that you have no error message, than check again question

  Respect of
  HELIOS

• Error: ORA-16757: failed to get the value of this property

  Hi all
  I have an error:
  DGMGRL > see the database dbname_stb LogXptStatus;
  Error: ORA-16757: failed to get the value of this property
  I check:
  DGMGRL > see the configuration;
  
  Configuration - dbname_dg
  
  Protection mode: MaxPerformance
  Databases:
  dbname_pr - primary database
  dbname_stb - physical of the standby database
  
  Fast-Start Failover: DISABLED
  
  The configuration status:
  SUCCESS
  
  drcdbname_stb.log:
  RSM0: Received the request the property Get: rid = 0 x 01010000, pid = 54
  2012-10-17 15:21:14.702 of database Resource: get the LogXptStatus property
  RSM 15:21:14.702 2012-10-17 error: trying to interview a 'LogXptStatus' primary type property on a standby database resource.
  2012 10-17 error 15:21:14.702 database resource GetProperty (16501,16757)
  
  I don't understand this error?
  Thank you all.

  Take a look on this

  Re: ORA-00254 | Trouble with dataguard

• Errors running SQLIOSim - Simulator/o SQL - error: 0x8007045D error text: the request could not be performed because of an i/o device error. Description: failed to get the info from cache drive to C:\

  When we execute SQLIOSim on a Server Windows 2003 VM hosted on an ESX 3.01 or 3.5 server, you get the following messages:

  Error: 0x8007045D

  Text of the error: the request could not be performed because of an i/o device error.

  Description: Failed to get the info from cache drive to C:\

  Anyone know what is the cause or how to solve the problem (if it is a question)?

  Thank you

  Had the same error and found this blog:

  http://blogs.msdn.com/psssql/archive/2008/01/14/SQLIOSim-error-request-could-not-be-performed-unable-to-get-disk-cache-info.aspx

  It will be useful.

• I can't get the XP computer recognize the Windows 7 network file share more wireless

  Problem file/network sharing wireless with a professional system XP and Windows 7

  I have 2 computers - 1 with XP and Windows 7 pro upgrade and use a secure wireless network...  I have set up my network on the new computer and can see the files on my new XP computer, but I can't get the XP computer to recognize Windows 7 one.  What should I do?

  Hi Captive,

  
  Method 1:

  I suggest you to check if temporarily uninstall the antivirus software on the computer Windows XP allows you to connect properly.

  But don't forget to install the software after troubleshooting is done such that your computer will be at risk.

  Method 2:
  You can also check the settings of firewall on the windows XP computer. You can check if the ports are opened correctly for the network to connect. See the help link - below
  http://support.Microsoft.com/kb/283673

  Method 3:
  If the problem persists, you can even perform the clean boot on the Windows XP computer and check if you can identify the application that is causing problems in the clean boot state. To perform the clean boot follow step 1, mentioned in the article, below, and then try again checking in this state of boot -

  http://support.Microsoft.com/kb/310353

  If the issue is resolved check what non-Microsoft service or program is at the origin of the problem. referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  I hope this helps.

• My computer is dead, had to get the new computer. Installed PS CS2 and tried to activate it. Cannot call the online help desk, they sent me to you to activate my software. I have the serial number and the last activation number. T

  My computer is dead, had to get the new computer. Installed PS CS2 and tried to activate it. Cannot call the online help desk, they sent me to you to activate my software. I have the serial number and the last activation number. Thank you. Or to intervene in the forum.

  
  

  
  

  [address removed by email.. mod]

  
  

  Hi carlkent,

  Your serial for Photoshop CS2 key would not work as the activation for CS2 servers were closed.

  You must visit this link to download the version CS2 and use the key to series mentioned in this link: https://helpx.adobe.com/creative-suite/kb/cs2-product-downloads.html

• Get the selected value of a select list item in a tabular presentation.

  Hi, I have a tabular form and I'm trying to get the selected value of a select list item and store the selected value in a page element hidden elsewhere on the form of tables, so I can use this value.
  
  I already have something similar to the input on the tabular presentation elements.
  
  Get the initial values
  var line = $x_UpTill (this.triggeringElement, 'TR');
  numberOfItems var = $(' input [nom = "f12"]', ligne) [0];
  
  numberOfItems = 123456.123
  
  What I want to do is soemthing similar as above but capture the value of a select element in tabular form. I thought I could do something like:
  
  Get the selected value
  var line = $x_UpTill (this.triggeringElement, 'TR');
  numberOfItems var = $('selected [name = "f08"] .val ()', line) [0];
  
  But this method leaves the as undefined var numberOfItems.
  
  Please help me to find a way to identify the item 'select' in the tabular form called "f08" and get this value.
  
  I am a newbie to jQuery selectors etc...
  
  Thank you.

  Strange that you do not get an error when you run your 2nd selector.
  In any case for this kind of thing, see the HTML code of your tabular form and tell us what triggers, the element can be useful. Or better create an example at apex.oracle.com.
  In any case, I see two errors:
  (1) is there any html element "not selected" instead, the LOV in the APEX element has the select tag
  (2) you can not write a. val() inside a selector that you must place it after your selection.

  So I'd like to rewrite your code to:
  var line = $x_UpTill (this.triggeringElement, 'TR');
  numberOfItems = $("select_[nom_="f08"]",_row).val () var [0];