Failed to get the status of printer/bizhub Konica Minolta C654e

Similar Questions

• LaserJet 2100TN: Laserjet 2100n - failed to get the status of the printer

  You just bought a few new computers Mac - one is a Macbook Air running Yosemite and one is a trash Pro Mac also running Yosemite. I installed the printer laserjet 2100 on the Macbook Air with no problems.

  BUT, when I installed the same printer on my garbage can, it will not be printed. Says: "unable to get the status of the printer.

  I noticed a couplde things: on the Macbook Air, the selection of the pilot was MUCH greater than on the trash even if the OS is exactly the same thing. So then I tried to download the drivers from HP, but apparently they are old. Now on the Macbook Air, the driver software is something like v19.11. On the trash, it is of the 4.3.1.094. So maybe I've screwed something up there.

  But in any case, I'll need to get the updated driver. Where is it stored? I tried to move the entire HP folder in my Macbook Air trash who lies here: car/library/printers. It does not work.

  any help would be appreciated! It's an old printer bought in 2000, but she such a great printer!

  Hello.

  Printers, Scanners &, select the printer and click on the sign - off.

  Then download and install the package away:

  https://support.Apple.com/kb/DL907?locale=en_US

  Once installation is complete, click on the sign more and re - add the printer, be sure to select the pritner model in the menu drop-down use while adding.

• IOM sql Query to get the status of the failed task

  Hello world
  
  We have an obligation as we need to get the status of a particular task (say Create User in OID - Completed\Rejected status resource) for the particular user. We are able to get the status of the provisioed of resources to the user but not the status of the special mission which is trigerred for the user.can someone put some light on it. We must have the SQL query to do this.
  
  Thanks in advance.
  
  Kind regards
  MKN

  Hello
  Use this query to get the status of the task, also check the cooments

  SELECT USR. USR_LOGIN, OSI. SCH_KEY, ANN. SCH_STATUS, STA. STA_BUCKET OF
  OSI, CHS, STA, MIL, TOS, PKG, OUEDRAOGO, USR, OBJ, OST
  WHERE OSI.MIL_KEY = MIL.MIL_KEY
  AND ANN. SCH_KEY = OSI. SCH_KEY
  AND STA. STA_STATUS = SCH. SCH_STATUS
  AND TOS. PKG_KEY = PKG. PKG_KEY
  AND MIL. TOS_KEY = TOS. TOS_KEY
  AND OUÉDRAOGO. USR_KEY = USR. USR_KEY
  AND OUÉDRAOGO. OST_KEY = OST. OST_KEY
  AND OST. OBJ_KEY = OBJ. OBJ_KEY
  AND OSI. ORC_KEY = OUEDRAOGO. ORC_KEY
  AND OBJ. OBJ_NAME = "User AD".
  AND OST. OST_STATUS = "Provisioning" - filter accordinglly
  AND STA. STA_BUCKET = 'pending' - filter accordinglly
  AND PKG. PKG_NAME = "AD User" - filter accordinglly
  AND MIL.MIL_NAME = 'System' - filter accordinglly Validation
  ;
  Thank you
  Kuldeep

• Error: ORA-16757: failed to get the value of this property

  Hi all
  I have an error:
  DGMGRL > see the database dbname_stb LogXptStatus;
  Error: ORA-16757: failed to get the value of this property
  I check:
  DGMGRL > see the configuration;
  
  Configuration - dbname_dg
  
  Protection mode: MaxPerformance
  Databases:
  dbname_pr - primary database
  dbname_stb - physical of the standby database
  
  Fast-Start Failover: DISABLED
  
  The configuration status:
  SUCCESS
  
  drcdbname_stb.log:
  RSM0: Received the request the property Get: rid = 0 x 01010000, pid = 54
  2012-10-17 15:21:14.702 of database Resource: get the LogXptStatus property
  RSM 15:21:14.702 2012-10-17 error: trying to interview a 'LogXptStatus' primary type property on a standby database resource.
  2012 10-17 error 15:21:14.702 database resource GetProperty (16501,16757)
  
  I don't understand this error?
  Thank you all.

  Take a look on this

  Re: ORA-00254 | Trouble with dataguard

• How can I get the status bar on my web page

  I want to get the status bar at the bottom of the web page so that I can slide from left to right, if an article is too large for my monitor. I got it this morning 05/01/15. After Thunderbird as an option for my email, the bar disappeared after uninstalling Thunderbird. I know hovering on the web pages I have on my menu bar, but I'd rather have the bar all at the bottom of the page.

  The gray bar appears in my email only. I would like to have it on all my sites.

  Thank you.

  I guess what you mean in the bar of horizontal scrolling if you want to be able to scroll horizontally.
  Firefox will normally only show the bar if content extends outside the browser window.

  You can have zoomed pages by accident.
  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl / command + 0 (zero))
  • http://KB.mozillazine.org/Zoom_text_of_web_pages
  • http://KB.mozillazine.org/browser.Zoom.full
  • http://KB.mozillazine.org/browser.Zoom.siteSpecific

• Nvy HP 4500: check the status of printing etc.

  How can I check the status of print, for example what are print jobs in the queue?

  Thanks for letting me know who helped @hbf1842.

  Have a wonderful day!

  Think about scoring the Message post that solved the problem like "Accept as Solution" so that someone else in the community of HP who can meet the same or similar problem will know what to do.

  Thank you.

• Get the status of power system with labview 8.6

  can I get the status of the system power from my laptop with labview 8.6? I have a system that can send the alarm when the percentage of battery power and tha system loss is 30% lower.

  my system is windows XP sp3 from the tank you

• I want to add a printer, but get the error message "print spooler service does not work."

  I can't print from my computer.  This has happened with no other visible defects on the computer or the printer.

  When I use the printer in case of problem, and hit the 'add printer' link, I get the error message "print spooler service is not."

  "I did a search on"print spooler"but got no result

  Duane

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  If the suggestions below do not resolve your problem, after back and don't forget to include the following information:

  • The version of Windows you have, including service pack (start > run > winver > OK)
  • The brand and model of printer you have (includes the manufacturer, model and model number, as in HP Deskjet 6800)
  • How the printer is connected to the computer (parallel, USB, network, wireless, etc.).
  • It happened just before this symptom started
  • What application antivirus you have and if your subscription is up to date and has been maintained continuously
  • The full text of the error messages related to printing, without paraphrasing

  
  

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Can't get the page to print from Microsoft Visio. Also will not delete the queue.

  Can't get the page to print from Microsoft Visio. Also will not delete the queue.

  The problem arose when the USB printer to a laptop with Windows 7 on a desktop using Windows XP. The printer is a HP Deskjet D1660.

  Hunting around, I found a solution that had been proposed for someone else's problem. The detachment is shown below.

  Re: Update critical to correct a PC to printer communication problem, washer dot?

  Options

  • Mark as new
  • Bookmark
  • Subscribe
  • Subscribe to the RSS feed
  • Highlight
  • Print
  • Report inappropriate content

• com.sun.messaging.jmq.admin.apps.broker.BrokerCmd failed to get the exit code of the child.

  I use D:\MessageQueue4_5\mq\bin\imqcmd.exe to get heads of JMS queues. In most of the facilities, I can retrieve the results without problem.

  At a single facility, however, I get an error when you try to run this command. Called with no arguments, it should display a list of available commands. But that's what I get instead:

  D:\utilities\imqChk > d:\MessageQueue4_5\mq\bin\imqcmd.exe

  Boot process failed.

  Could not run

  Java

  -cp

  d:\MessageQueue4_5\mq\lib\imqadmin.jar;

  d:\MessageQueue4_5\mq\lib\fscontext.jar

  -Dimq.home=d:\MessageQueue4_5\mq

  -Dimq.etchome=d:\MessageQueue4_5\mq\... \etc\mq

  com.sun.messaging.jmq.admin.apps.broker.BrokerCmd failed to get the exit code of the child.

  Other info:

  • Java is installed (version 1.7.0_17).
  • QBrowser using, I can sign in successfully and retrieve information from queue.
  • All of the named files and jar files are where they are supposed to be within the meaning of the doce above.

  I was not able to locate the source of the problem. Any ideas would be greatly appreciated.

  Thank you.

  I had this same problem and solved by editing the file \glassfish3\mq\etc\imqenv.conf manually by setting IMQ_DEFAULT_JAVAHOME as follows:

  IMQ_DEFAULT_JAVAHOME = / Files/Java/jdk1.7.0_45 program

  Note the orientation of the slash. It's on Windows, and when I used with Windows style slash escape sequence, it does not solve this problem only when I used the mangled Unix style done.

  Hope this helps,

  -Noah

• Can't mount NFS share - operation failed, diagnostics report: failed to get the path console for volume

  I'm trying to mount a NFS on ESXI 6 volume, but continue to operate in the error.  Googling everything nothing helped, so I'm here. Error:

  Call "HostDatastoreSystem.CreateNasDatastore" of object "ha-datastoresystem" on ESXi '192.168.xx.xx' failed.

  Operation failed, the diagnostic report: failed to get the path of the console for the volume, the name of the sample.

  The NFS share is located on a synology nas. I checked the permissions and configuration. Everything seems correct based on the various boards and KB articles.

  Ideas?

  Thank you.

  Find the esx.conf file in/etc/vmware.

  If you could also share a copy with me...

  Try to mount the NFS VMware KB: Volume fails with the error: could not resolve the host name

  Check the link as well below.

  http://www.Bussink.ch/?p=1640

• I have a form in which the text area can be developed to accept more text, but the text does not appear on the printed copy.  How can I get the text to print?

  I have a form in which the text area can be developed to accept more text, but the text does not appear on the printed copy.  How can I get the text to print?

  Hi robinm6200,

  Make sure that you have selected 'Document and annotations' under 'Comments and forms' when printing.

  

  Kind regards

  Nicos

• How can I get the adobe pdf print option?

  How can I get the adobe pdf print option?

  HI Markus,.

  If you are on a Mac. Here are some links for you. Print a PDF in Illustrator on Mac

  Unable to print a PDF file | Mac OS X 10.6 and later

  In Windows, just file print and select the Adobe PDF printer or save as PDF

  Concerning

  Scott

• Failed to get the disk partition information when you add the new data store

  Hello

  Update my ESX to version 4 Update 1 (4.0.0, 256968). Now, I'm trying to add a new data store to a cluster in vCenter and receive the following error message when I will review the current structure of the disc "error when configuring the host: failed to get the disk partition information. When I click back, then next, there's no error message but in the formatting window, I get the error "Object reference" not set to an instance of an object.

  I see this question has been asked before, but I can't seem to find an appropriate response. Anyone? The interface using CLI instead of vCenter isn't an option (alignment VMFS, workload and so on)

  I use Dell R900 with an EMC Symmetrix VMax SAN

  The size of the LUN I want to add is 741 GB

  Concerning

  Marius Aulie

  If you have a virtual machine for Windows test, you could do the following, to ensure that the logic unit number has a clean partition table:

  -set the LUN as a GROSS physical to virtual machine device

  -Run diskpart, select the drive and run the CLEAN command

  -detach the LUN to the virtual machine

  -try to create the data on the LUN VMFS store

  The size of the block of the data store where the VM test can be a problem with the above. Due to the size of the LUN, the size of the block of the data store must be at least 4 MB. Attach the LUN to a physical test system could be an alternative.

  André

• Can someone please tell me the "see correct / more effective to get the 'status' XML ' attributes

  Can someone please tell me the "see correct / more effective to get the 'status' XML ' attributes (ID, CssClass, Description and IsActive to the XML code below):

  Implementation will be the standalone .swf file

  (XML)

  <ArrayOfLineStatus>
<LineStatus ID="0" StatusDetails="">
    <BranchDisruptions/><Line ID="1" Name="Bakerloo"/>
    <Status ID="GS" CssClass="GoodService" Description="Good Service" IsActive="true">         
         <StatusType ID="1" Description="Line"/></Status></LineStatus>
</ArrayOfLineStatus>

  < ArrayOfLineStatus >

  < LineStatus ID = "0" StatusDetails = "" >

  < BranchDisruptions / >

  < line ID = "1" Name = "Bakerloo" / >

  < State ID = 'GS' CssClass = "GoodService" Description = "Good Service" IsActive = "true" >

  < StatusType ID = '1' Description = 'Line' / > < / status >

  < / LineStatus >

  < / ArrayOfLineStatus >

  There is no good way with as2:

  trace(this.firstChild.childNodes[1].childNodes[4].) Attributes ['ID']);

  trace(this.firstChild.childNodes[1].childNodes[4].) Attributes ['CssClass']);

  etc.