P70 - a system based on space issues nearly 11 GB
Just bought P70 - A last week and just realized that the system space storage has taken over 11 GB.
This is the default system using too much storage space up to give me only 4, 4 GB of storage on the left?
I already try to reset to factory default settings and have the same result.
And this is my version of android:
My P70 got the replacement of the motherboard to the lenovo service center (kebon sirih, jakarta).
First of all, I have to wait for weeks for a replacement of the Commission, but I insist for replacement because it's a new phone. And finally, I got the new Board of Directors. The technician said that corrupt storage or something. And the factory maybe defects.
My suggestion is to go to the lenovo service center in your town and the replacement of the Board of Directors
Tags: Lenovo Phones
Similar Questions
-
A temporary profile is loaded after you log on to a system based on Windows 7.
A temporary profile is loaded after you log into a system based on Windows 7 and off toward the end it started to occur very frequently on all systems with Windows & installed (laptops). Although we have a resolution of this problem that changes the registry (user profile), but for sure, it's just a work-around is provided by Microsoft. IT is so annoying to edit the registry every day as we observer that we get this problem almost every day. Gota there is something permanent to this problem and would also like to know why Windows 7 load with temp profile? Microsoft looks at this issue? Y at - it a patch update to solve this problem? ////
Hello
Have you tried using the method of "Fix corrupted profile ' to implement
another profile? Make and keep additional ADMINISTRATOR accounts.Run SFC/scannow and checkdisk to try to solve the problems of corruption.
Then if necessary check with the boot and other methods of
see if you can determine the cause or at least to resolve the issue.
Suspect antispyware/antivirus/security programs if it can be
others.References to Vista also apply to Windows 7.
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista or
Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
-
HI: I have problems with disk space; I went to Windows Help and read that if I go into Add/Remove programs who said I could remove programs or components of operating system I no longer use. I remove some programs that I don't use anymore, but I do not know what operating system components I should delete! Little help would be greatly appreciated! Thank you!
Before you remove the services I would remove all but the most recent backup and restore point. Then make a disk for temporary files Cleanup Wizard. You can make you smaller file page, if you do not use put into hibernation, you can save 4-8 space gigis.
-
Issues of file system based ESXi
Happy to RTFM, but I can't find a reference...
When you use vifs.pl to - put a file in an ESXi 4.1 the machine, where it is going?
I recently downloaded custom SSL cert/key and I was very confused when the instructions said to download/host/ssl_key and/host/ssl_cert when there doesn't seems to be a folder named 'host' at the root of the filesystem such as seen by a ssh login. In addition, I could not find "ssl_key" or "ssl_cert" using find:
# find /-name ssl_key
#
Do "vifs.pl - set" write files to a different file in total system?
---
Another thing that I find confusing is the output of "mountain". Why does mount not show mounted filesystems as data warehouses? They appear in/vmfs/volumes and/vmfs/volumes appears in the list of editing as a filesystem of type FCR, but nobody rides.
Thank you.
With vivid, you can access files) 1 datastore files/tmp) 2 and 3) ' host '. The 'host' files are not all in a specific folder. Rather the configuration file webAccessibleConfigFiles.xml dictacts what are system files are exposed alive and other tools API. The following link shows a list of these files: http://www.vm-help.com/esx/esx3i/esx_3i_rcli/vifs.php in your case, you will notice that the command of vivos specific files you are mapped to the appropriate files in/etc/vmware/ssl /.
-
Secure the workspace / personal work space issue
Hello
http://docs.BlackBerry.com/en/smartphone_users/deliverables/47561/als1342454475197.jsp
Based on the secure and personal workspace.
I have an application that works perfectly well in the 'personal workspace". It can access PIN, etc email account, and there is no problem.
Worksapce Secure: the app works that for secure electronic (BES 10 account). In this workspace, it cannot send PIN messages. I tried the code hard pine account information based on the personal workspace , but in the workspace secure but he simple does not work.
(1) is this a feature where the secure workspace is only for secure electronic and not Message of pine?
(2) in the personal account PIN of the workspace is visible in different types of Type::Messages account but in Secure, it shows only 2 accounts of secure e-mail and text Message account. No account of the Pine Message.
Is this feature or bug in BlackBerry?
(3) blackberry Hub in the secure workspace and the personal workspace , it shows the same content. Based on the docs Blackberry Hub for two workspaces must be different from the other.
Can someone BlackBerry shed more light on this. I'd put logs with more information later with App running in secure work space and personal work space.
Hello
I received a reply from Blackberry on this issue. It all depends on how you define the work and personal work space. The setting is based on Blackberry Enterprise Server 10. Here is the pdf file
http://Br.BlackBerry.com/content/dam/BlackBerry/PDF/BB10-regulated-EMM-datasheet.PDF
Balance: Personal and work
Regulated balance: personal and work but work has access to the PIN, sms etc.
Direction: Work only. Work has access to everything.
Under regulated enterprise-level mobility Blackberry 10 management control and setting , you will see different options for allows PIN SMS work or space. And then I guess her you should be able to have access to the PINS as well as SMS messages.
I can confirm this once I have test the build that I have developed.
-
Updated VM of ACS 5.4 a space issue warnings
Updated to 5.4 last night and ran into several caveats regarding the storage space. Here are the specific message:
Warning: [acsDiskSizeCheckUtil.sh] Patch of 1079 M size exceeds the quota allowed 1000 M. it will not prohibit hotfix installation process as long as there's enough disk space. Please note that this indicates that you should consider moving ACS to a superior machine of disk space
I note also that records 5.5 upgrade to do you have 500GB or more available for the upgrade.
The virtual machine was thin supplied with 512 GB drive and shows only 84 GB actually used, so a few questions.
- Is the underlying operating system used by ACS smart enough for me to simply increase the underlying capacity of the virtual disk and do recognizes this new capacity?
- Are there of the CLI commands in ACS that will allow me to see/manage the underlying disk capacity?
- The documentation says to increase the ability to be either "redefining" the virtual machine or install a completely new instance and restore the backup of the original. What exactly does Cisco means "re-Imaging"? They refer to storage vMotion, where can I change the disk during a migration?
Thank you for all time.
My comments:
Is the underlying OS used by ACS smart enough for me to simply expand the capacity of the underlying virtual disk and have it recognize this new larger capacity
-Unfortunately, the answer is 'No' I tried to increase the capacity of a disc in ISE and ACS with root privileges and both times have been a complete failure. Now maybe it was because of my low Linux skills but... in any case, the answer is really 'no' If you want that more disk space you must re-create the VM of the CSA and then restore/re-build your config
Are there any CLI commands in ACS that will let me view/manage the underlying disk capacity?
-Have you tried to display the records
The documentation says to increase the capacity be either "re-imaging" the vm or installing a totally new instance and restoring the backup from the original. What exactly does Cisco mean by "re-imaging" ? Are they referring to storage vMotion where I can change the disk during a migration?
-Related to the #1 issue. Basically, you blow the current VM and build a new one. Then you restore your configs.
Thank you for evaluating useful messages!
-
I have a T500 with Windows 7 Professional (32 bit) system. I used disk management (function decrease Volume) to make the 100 GB C drive (also have the drive D and E). Recently, I found the drive C have 15 GB of available space, but I have checked all the files (including hidden system files and hidden files) in the C drive, they are only less than 30 GB total. I used disk cleanup, and does not have too many useless things. Also, I used error checking and found that the hard drive without any errors. Anyone has an idea why I lost more than 50 GB of space on drive C?
BTW: there's a popup window said something about 'there is not enough storage space and restore, you want to increase 15 GB to it. " I believe that I have disabled the function "Backup Windows". Will there be another backup in my computer?
I appreciate any response and suggestions. Thank you very much.
This would Rescue and Recovery; It is a hidden in C:\RRbackups folder.
-
Windows 7 system image - no space for Shadow Copy
Windows 7 x 64 SP1
Disc 1 - drive drive C: - 42 GB free out of 100 GB + system
D - 173 out GB free drive of 200 GB
Disc 2 - drive E: - 287 GB 300 GB free
The system of running a report image "Backup and Restore" not enough space to create shadow copy volume. Shadow copy volume is "started - manual" Windows Backup Service is "Started - manual" target for Sysimage is drive E:. Help appreciated please
I tried several backup and imaging products, but until recently, Windows backup works wonders for me
-
The system restore disk space allocation
Separated from this thread.
I have a 1 TB hard drive and the folder of the system volume contains 291 G I know you said it should not be recommended, but I really need the space on my pc anyway around it?
Select Start, Control Panel, system, System Protection, place the cursor on your C partition (under Protection settings - disks available), click on the Configure button. Move the slider under disk space to the left so that the percentage is 2%. Click apply and then click OK and restart your computer.
-
Should I use basic mechanical system on my new Windows 8? Whenever I have call Dell for support on another issue, they me to do this, the pressure insisting that Dell prefers customers to have this and it is very important. I finally gave in last night after two hours of tired discussion (always support the India). They carried me, against my better judgment and I charged $115. (When I asked the price several times, each person evaded my question with finesse. 4 people, quite hammered me on this subject.) I found it only cost $40 on the site of SM, so for me it is a real scam and will take opening upward with them tomorrow when business offices. Everything I read in the MS community suggests that it is a bad idea, but I'm not clear on the question of whether it applies to Windows 8.
I really hate Dell support and hold that I had utilisΘ Geek squad. Microsoft so far has been very useful for its support.
You must uninstall System Mechanic and not to install any third party maintenance program if free or paid for.
I would not recommend Geek Squad either (after having seen a lot of posts here related)
You sure it was Dell support were you talking so that I find it most odd that they suggested you buy such a third-party utility.
On the rare occasions I have talked or emailed Dell support they never proposed such a utility
-
Creating native MSI bundle which is "per user" - based (no 'system' - based)
I'm collecting all the information to create a native MSI package which 'by user' is based - but failed.
This means:
(.) The MSI should install to the local directory of the user
(.) There should be no admin permission required
When you use the default < fx: deploy... nativebundle = 'msi'... > element - ANT-, the MSI is created "system-wide" basis, installation in ' / Prorgram Files "and asking the admin permission.
There is no concrete indication in the Oracle documentation (http://docs.oracle.com/javafx/2/deployment/self-contained-packaging.htm) how to create "per user" basis of MSI files. Maybe, someone already did it and could tell the imprortant steps...
Thank you!
PS: I know - using the .exe-company with Inno Setup will create "by user" installers by default, but I don't want to use if possible .exeTry
Although the name of the parameter gives no indication this is system vs by user :)I checked that code bundler MSI and it should honour it.
Let me know if it works (I don't have the time to try it myself today and go on vacation for a week so won't be able to check until I'm back).
Mark
-
VMware 4 needs additional space on a Lun for overhead or anything else?
For example, I have a Lun 300Gig, Im using 290 Gigs of it for a virtual disk. If theres only 10 gigs left on the LUN. VMware must space for what anyone, or can I max out my virtual disk to use all the space on the LUN?
Im guessing if I maxed out there I could not make a snapshot of the VM cause, there was no space. But other than can I max on the virtual machine to use all the space?
I hope it made sense
Thank you
Mike
You'll want to keep between 15 and 20% free. The target you choose depends on what you store on the data store and how you you vSphere. Items that use extra space
-snapshops - if you let a snapshot on a virtual computer for a long time, the snapshot file can grow to the size of the virtual disk. With 10 GB free, it would be pretty easy to fill in the data store. There are a number of scripts available that can help you find snapshots that have been left on the virtual machines. They are very useful to use, but with only 10 GB of space, you do not want to be very careful as the filling data store is not a good thing.
-virtual machine swap files - if you use memory limits or more allocate memory on your host computer, it will create files to exchange for your virtual machines.
-the virtual log files - these don't take up much space
Dave
VMware communities user moderator
Now available - vSphere Quick Start Guide
You have a system or a PCI with VMDirectPath? Submit your specifications to Officieux VMDirectPath HCL.
-
How to use ICC based color space
Hello
The question is how to define a color in the color space ICC based?
I tried with gState.strokeColorSpec.value.color table and it works very well when my based CIE color space is CMYK, but how when color space can be CMYKOG or RGB...?
Kind regards
William
My code worked, I tested it using only the ICC based and the DeviceN.
I don't know why, but the accident was on SetPDEContent.
I found another solution to my problem, I put the ICCBased colorspace as default CMYK color space and it works fine.
Thanks for your help
Kind regards
William
-
Satellite U500 - 115 PSU5EE fan error when executing an operating system based on linux
Hello
last week, I have a PSU5EE U500-115 with actuall bios 1.40, running Windows 7 without a problem.
But when running a linux based OS (like the Acronis image Boot-CD) the fan does not work and turns on only if the processor is really very hot and it is running only a few seconds on the highest State.
This behavior can be fixed?
Thank you
I'm not sure that your model of laptop is Linux supported so I do not think that you will find an official solution for this.
What you can try is to visit some Linux forum and see if anyone else has noticed the same error.Another thing is that U500 is not long on the market and I don't think at the moment you will find many people who have the same laptop and use Linux OS.
See also http://forums.computers.toshiba-europe.com/forums//thread.jspa?messageID=174741
-
Hello, I discovered this problem, try to install some programs, I got the message "Complete startup disk" pop - up so I opened the storage news. As you can see in the picture 'Other' section is supported of the disc space. I have no idea of what occupies as much memory, I don't have knowledge of downloading something that could be taken of this huge amount of GB.
Another thing, the 108.7 MB of free space keeps changing everytime I open the storage info. As soon as he was 458 MB and 5 MB once.
OS X El Capitan
Version 10.11.1
iMac (21.5 inch, at the end of 2013)
Some time, I had a similar problem, discovered a game controller that I had installed software for my fill error logs and filling of the hard drive. You can check the logs and see how much space they use.
Maybe you are looking for
-
Firefox deletes my dynamic bookmark feeds on reboot
Whenever I subscribe to a website through bookmark dynamic, it will show in my toolbar just fine and dandy. But when I restart Firefox, all my dynamic bookmarks have disappeared. I tried the information on this page http://mzl.la/ON1mdk with removal
-
Need drivers for my Satellite C55 B856 Win7
in the site there is no driver for it at all? need driver for my laptop PART NO. PSKT4V - 03W001ARSERIAL NUMBER. 4E115915C driver Windows 7 please
-
Portege R600-10 q - SD cards does not always work
Hello I have a r600, but there seems to be a problem with an sd card, 2 GB SD cards bed perfectly, but if I put a 16 GB SDHC sometimes read, sometimes not... When I put the 16 GB sdhc and the pc recognize, if I try to paste a folder of movie with 4 G
-
I get the error code 80070008, when I set up an account Xbox on my Nokia Lumia 730 dual sim phone?
-
HP Docking Station EN488AA - part number for power adapter
Hello I have a HP Compaq nx8220 laptop, with HP Docking Station EN488AA. Unfortunately I lost the power supply for the docking station. I always have the power supply for the laptop itself (393955-001), but they do not plug in to the docking station.