Creating native MSI bundle which is "per user" - based (no 'system' - based)

Similar Questions

• ACS 5.2 - Support for RADIUS attributes per user

  Hi all

  Does anyone know if it is possible to configure the RADIUS attributes on a per user in GBA 5.2 basis?

  That was possible under ACS 4.x, however, that I can't seem to find reference if ACS5.2 supports.

  Thank you

  Leon

  You can do this by setting by using attributes and then by substution attribute.

  You can see an example of it to set an internal user attribute to use as the value for the field address-IP-box

  This is just an example and can be applied also to any attribute RADIUS in which set an attribute of the user of the same type. Values can also be taken from an external identity as AD store

• How to limit rights to an Application Instance per user?

  This excellent post, I learned that I we can assign a form field to the notion of the right of an Instance of the Application.

  Is it possible to restrict the list of rights to an Application Instance per user?

  I mean, is there a way to show for example all rights for a user and only one or two for user B when the user submitted a request for clearance of a specific Instance of the Application?

  If so, is it possible to model the business logic using only the IOM or should I write my own business logic module for that?

  TIA

  Leo

  Without custom code to set the users it will show for in the catalogue, the OOTB option is based on the membership of the organization.  In the Administration Console system, if you go to all instances of the application, you can see which organizations you have published the application.  The same goes for the rights of this forum, you can also see which organizations law is published on.  It is the only default way to do this.

  -Kevin

• Create the role attribute to a recipient user after user approval - IOM 11.1.2

  Hi all
  
  I ve created a composite custom for creation of the user. Once a user of the applicant (for example user-R, other than the xelsysadm) creates a user (say User1), he would go to approaval to the Manager of the applicant (say user-RM). Once the applicant manager approves the request, the user is created in the IOM.
  
  Now, once the user is created, I need to assign a role personalized the User1 by using APIs. For some reason, we will not use the role membership rule.
  
  
  My Situation
  ----------------
  -J' created a handler for post (for MODE = CRΘER) which generate custom "user login" and also assign a role personal to the user. Role was being entrusted "Beneficial user" if created by "xelsysadm", for, there was no approval triggered.
  
  But when I create one recipient user with other than 'xelsysadm', the workflow is triggered and role assignment is a failure in the event handler.
  
  Please suggest me a way to assign the role (using API) on the 'recipient user', once the application is approved by the assignee.

  See the Article: 1532267.1

  -Marie

• How can identify us which office a user will receive in a persistent pool?

  In our company, we go through a large implementation of virtual machines. Here are our current deployment process:

  1. Quick Clone devices of a model to measure determined by the business line

  2. Create a persistent area in Manager view but do not add devices

  3. Additional full customization to devices according to the needs (software extra, settings, etc.)

  4. Data migration from the employee of their physical box to their new virtual machine

  5. Add their designated VM pool persistent and to connect immediately to ensure that they are awarded.

  As you can see we are not using and app virtualization or profile management utilities. It is therefore important that our users get a specific device. What we would like to be able to do is all the additional configuration at the front and add all devices in the pool from the beginning and somehow indicate which device each user will receive instead of having to add the devices one by one to the persistent pool.

  Any thoughts?

  Sorry, you can find the console from that.  It is vdmadmin.exe and it is on the broker for connections.

  http://www.VMware.com/PDF/viewmanager_cl_tool.PDF

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12

• Number of concurrent Sessions per user mismatch with profile settings

  Hello
  
  Version of DB Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  OS RHES 5U2
  
  I created a profile MYPROFILE and set the value of simultaneous (per user) Sessions on 30. DB has rebounded after the creation of the profile. I made this default profile for a specific user 'MYUSER '. I checked that questioning DBA_USERS (select profile from dba_users where username like "MYUSER") I checked v$ session with this particular user after awhile and noticed that it showed 34 sessions. Certain ASSETS and the INACTIVE.
  
  My question is, if I set the maximum number of concurrent sessions per user on 30 to myprofile and made it the default for MYUSER profile, so how did I am still able to see more than 34 sessions of myuser regardless of the State? I don't know if it's relevant or not, but the IDLE TIME is set to 15 minutes.
  
  Thank you for your help
  
  Published by: user560883 on July 4, 2010 12:45 AM

  user560883 wrote:
  Hello

  Version of DB Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  OS RHES 5U2

  I created a profile MYPROFILE and set the value of simultaneous (per user) Sessions on 30. DB has rebounded after the creation of the profile. I made this default profile for a specific user 'MYUSER '. I checked that questioning DBA_USERS (select profile from dba_users where username like "MYUSER" ;)) I checked v$ session with this particular user after awhile and noticed that it showed 34 sessions. Certain ASSETS and the INACTIVE.

  My question is, if I set the maximum number of concurrent sessions per user on 30 to myprofile and made it the default for MYUSER profile, so how did I am still able to see more than 34 sessions of myuser regardless of the State? I don't know if it's relevant or not, but the IDLE TIME is set to 15 minutes.

  Thank you for your help

  You have the parameter resource_limit = true ? You must do so before test sessions_per_user. You can do the following,

  alter system set resource_limit=true;
  

  After that, yet try and post comments.

  HTH
  Aman...

• FileVault2. The encryption is done on a per-user basis.

  FileVault2. The encryption is done on a per-user basis, or if the entire disk is encrypted.

  What is the best way to use FileVault2 on a new Mac, if there are multiple user accounts.

  Concerning

  the entire disk, but not all disks on the system as far as I KNOW.

• If it hurts if I delete the system per user queued?

  original title: DURING the DISK CLEANUP

  WILL IT HURT IF I DELETE THE SYSTEM PER USER IN QUEUE AND WINDOWS ERROR REPORTING SYSTEM?
  I'M RUNNING OUT OF ROOM AND WHAT ARE THE FILES DEVOURS MORE SPACE!

  Yo can do that, but you can't win important disk space. The three main newspapers are system, security and Application and each maximum by default 20 MB each.

  How to deal with each must select Start, Control Panel, administrative tools, Event Viewer, Windows logs. Place the cursor on the system, click with the right button on the properties and select clear. Repeat for security and application logs. You can also change the default 20 480 KB 2 048 KB maximum. When you have completed the change make sure you click on apply. You must restart the computer to apply the new settings. You note miust use clearly if you want to set a lower maximum rate.

  You'll have more space by deleting old restore points. This action can greatly increase the free disk space.

  Select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. Run Disk Defragmenter.

  Using the system restore option is most appropriate when your system is slow and you need to increase the free disk space on your C partition. If you have errors that could be solved by using the system restore to your system settings back to before the error occurred initially do not use this option.

  If more than one person uses the computer and they have their own user log you need to run Disk Cleanup in each user profile that you want to delete all the unwanted files.

  A better program of disk cleanup is cCleaner. Delete System Restore points may be important if you have little free disk space. The ability to delete them is one of the tools options. cCleaner comes with a registry tool. Do not use this tool as any registry cleaner could lead to the creation of very difficult to resolve system errors.

  http://www.CCleaner.com/download

• Disk Cleanup for Vista reports 12.6 GB for "per user queued windows error reporting"

  original title: clen-up disk

  My Cleanup utility disk Vista reports 12.6 GB for "per user queued windows error reporting". Is it safe to delete this item? Is that why my laptop is slow today and still freezes?

  Yes, but isn't concert read this this type of error: http://www.vistax64.com/tutorials/175654-disk-cleanup-windows-error-reporting-bug-fix.html

• How can I set QoS policies on a per user basis?

  I'm trying to figure out how I might be able to have the QoS policies to change on a per-user basis, so that different users on the same computer, they might have different QoS policies. I'm looking to avoid having to implement server (no advertising). If there was an easy GUI for admins to change the levels of QoS for the system, it would be a bonus.

  Hello

  The question you have posted is better suited for the TechNet forums. I suggest you to report the issue in the following link for assistance:
  http://social.technet.Microsoft.com/forums/en/w7itproui/threads
   
   
   
  I hope that helps!

• You can buy JUST Adobe Stock for three users in a company? The guy I chatted with that said I had to pay $199.99 per year over $ 69.99 per user. Is this correct?

  You can buy JUST Adobe Stock for three users in a company? The guy I chatted with that said I had to pay $199.99 per year over $ 69.99 per user. Is this correct?

  When I go on the website of plan, it says 199.99 per license as well. Do we buy 3 licenses then 3 plans to 69.99 each apps? It's very confusing.

  Well I advise you to contact Adobe sales for the same because they can help you with the correct plan according to your needs.

  Contact us | Adobe

• How do you create a video thumbnail which becomes bigger if clicked?

  I have video thumbnails added on my site for youtube and facebook. Thumbnails are small if clicked. How do you create a video thumbnail which becomes bigger if clicked? Thank you, Kelsi

  Try to use a Widget for Composition.

  Add your thumbnail image in the relaxation area.

  Add your Youtube video link to the part of Lightbox.

  You may need to test your browser page, then resize the jQuery framework to your liking.

  If you want your video to show on the top of your page, try the blank publication Widget.

  If you want to fade the page behind your YouTube video box then try the Widget of Composition of LightBox.

  See how a Youtube video here

• By the price di creativo su per user (not per aziende) viene Emese manufacture singolo cloud by fiscalmente ITALIA P.IVA valida

  By the price di creativo su per user (not per aziende) viene Emese manufacture singolo cloud by fiscalmente ITALIA P.IVA valida

  Hello

  Purchase order, you will be asked to enter your VAT number, if you provide the VAT ID it will be printed on the invoice.

  Update this thread if you have any other questions.

  ^ Ani

• Is it possible to create a standard form which can be sent by email to anyone and once filled by the receiver, have a button that clicks on the receiver and the form is encrypted and attached it would open up an email to the sender and a built-in admin pa

  Is it possible to create a standard form which can be sent by email to anyone and once filled by the receiver, have a button that clicks on the receiver and the form is encrypted and attached to an e-mail to the sender and a built-in admin password it open?

  Hello Graphicsguy123,

  You can get the workflow above using the Widget feature. Here is the link for reference:

  https://helpx.Adobe.com/document-cloud/help/create-widgets.html

  -Usman

• I created my site with Muse and uploaded to an external ftp hosting, now my secure log in will not work because I use no BC. Is there a way to create a secure log which will arrange with forced to use BC?

  I created my site with Muse and uploaded to an external ftp hosting, now my secure log in will not work because I use no BC. Is there a way to create a secure log which will arrange with forced to use BC?

  Hello

  Secure area login feature will not work unless you host your website with BusinessCatalyst.

  Please take a look at this as an alternative

  Password protect Pages Widget for Adobe Muse

  Also, check this thread,

  Re: Can I create a login/password in the Muse for a HTML5 page or two?