The system restore disk space allocation

Similar Questions

• Yet stolen the system restore disk after that I have disabled

  I noticed that something was stolen from my hard drives recently and went in the resource monitor to check it out.  I noticed that the system process continually wrote to the 'System Volume Information' folders on all three of my drives at a heavy pace.  Some research indicates that he was at work system restore feature.  So, I disabled for each drive and deleted all restore points each through Windows system properties.  Unfortunately, which made no difference, even after a reboot.  Resource monitor shows still writing for the 'System Volume Information' folders on all hard drives 3 heavy disk.  What can I do to make this stop?

  In addition, Windows Explorer bounces between statement my drive correctly and I have very little or no space left.

  RReed

  My bad.  I saw Bitlocker and typed bit defender.

  Fvevol.sys with BitLocker Drive Encryption description driver of Microsoft Corporation belonging to Microsoft® Windows® operating income...

• resize the system restore...

  I just did a cmd because my system gb c: os disappeared every day a... now I have them all back and today he went up to 2 GB extra, this normal? He was 870 now it is 872 GB, how come it is going so far? is this normal?

  Hello

  see if this program helps you to determine what is taking place:

  http://www.Jam-software.com/treesize_personal/

  ________________________________________________________

  by default system restore will have up to 15% of the capacity of the hard disk

  you would like to reduce this amount

  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html

  http://www.vista4beginners.com/system-restore-space-used

  _________________________________________________________

  Disk Cleanup:

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  1. By clicking on the Start button to open Disk Cleanup , on all programs, accessories, click System Tools, and then click Disk Cleanup.

  2. In the Disk Cleanup Options dialog box, choose whether you want to clean your own files only or all files on the computer. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. If the disk cleanup: drive selection dialog box appears, select the hard disk you want to clean and then click OK.

  4. Click the Disk Cleanup tab and select the check boxes for files that you want to remove.

  5. When you have finished select the files you want to delete, click OK, and then click on delete files to confirm the operation. Disk Cleanup on delete all unnecessary files from your computer.

  The other Options tab is available when you choose to clean up the files of all users on the computer. This tab includes two additional ways to free disk space even more:

  • Programs and features. Open programs and features in Control Panel, where you can uninstall programs you no longer use. The column size in programs and features shows how much disk space each program uses.

  • System Restore and shadow copies. Guests delete you all but the most recent restore point on the disc.

    Use system restore to return your system files to an earlier point in time, restore points. If your computer is running normally, you can save disk space by removing the previous restore points.

    In some editions of Windows Vista, restore points can include previous versions of files, called the shots and backup images created with Windows complete PC Backup. This information will also be deleted. For more information about system restore, search Windows Help and Support 'system restore.

  _________________________________________________________

  also scan for malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  __________________________________________________________

  and read these information from microsoft on windows optimization

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• file missing or corrupt XP Windows, system restore disks do not work. Help, like xp, like vista or win 7

  My desktop has windows xp media center edition with Service Pack 3 for years, there work and maybe it's time to junk food, however my laptop has windows vista, which I don't like, I have seen windows 7 and am not fond of him either, so what can I do? When I load the system restore disks that it doesn't load until a certain point where it says it is to copy the files, then tells me that the restore is complete. When to start again, I said the file "\system32\hal.dll ' is corrupted or missing and reinstall... How do I do that?  Thanks for any help.

  SADA

  I'm writing this in case others have had the same problem, I had and it was impossible to restore.

  When I pressed "del" and got the installer, I looked in the first box, product information.

  This info was typed in a field of google search on a working pc, and I discovered that I could restore my pc by pressing the ALT key and pressing F8 repeatedly. It will work for Acer Asprire anyway. Just an idea for all those who were distraught as I was and knew nothing about the restoration or what my pc really was. I was lucky and got my restored xp, it works ok and I enjoy it once more.

  Good luck to all of you who have had the same problem I did.

  Whenever I turn on my pc, I find the time to scan the disk and chjeck to find errors etc, just to try to avoid

  have a pc unstabel again.

  SADA

• Is the system restore wiped XP Recovery disk space?

  I definitely OE deleted messages, and then wipe the hard drive.  I need to do a restore of the system because of an annoying popup Windows start happened after deleting some files after you uninstall an HP printer.  A system restore will cancel the changes on the hard disk, allowing thus the recovery of these messages permanently deleted using Recuva or another program recovery?  That I don't want to happen as I am to get rid of the computer (I bought a new).

  If you you debarrassez of your PC anyway, why not simply wipe the hard drive with a program of format-based security (Google can help)? Even if the system restore does not return emails, there is still a lot of information on this computer, so that you can not someone else access using a different type of deleted file recovery program. Never made a purchase online? Access your bank account? May make changes to your social security account or 401k? It's all there somewhere.

  If this a brand like HP or Dell PC, you should have a recovery or disk partition which will allow you to restore the first day.  Which will be enough to thwart the average snooper a little better than average.
  If it's not, and you have the OS disk, you can wipe it off yourself and do a clean install.

  SC Tom

• problem with the system restore when you try to back up disks

  my system crashed.  would not boot.  Several attempts later, went to the system recovery... do you have a full upward (23 dvd) then did a complete restore.  laptop works.  However restore my files from the backup disks does not work.  I get a failure in the system restore somewhere in the treatment of the disc 12 (out of 23).  Help!  sighing heavily... of course this happens when I am in a time crunch

  Hello cyberterp. I see that you are having problems to restore your data from backup disks. To make sure that I understand you were able to make the recovery of the operating system, but the data you have saved in the course of the process you're trying to get now?

  Check the bottom of the twelve disc and make sure that there are no scratches on it. If there is even the smallest scratch to find a local store that will shine the disc for you; This can allow you to read the data. If discs are in perfect condition and then either media are bad or there was a problem (unnoticed) during the backup process and it is unlikely that you will be able to recover the data.

• None of my work.imtrying of tools windows vista to restore my comp.to than its original state, but I can't find to open all the tools like system restore, disk cleanup, difragment, etc...

  When I turn my comp.on it gives me all sorts of messages cannot find shortcut to file.it is unable to deal with a problem.

  When I turn my comp.on it gives me all sorts of messages cannot find shortcut to file.it is unable to deal with a problem.

  Hé el24

  you do not etc system restore disk cleanup to put your computer to the standards of the factory how you bought it if that's what you hear

  Contact your computer manufacturer and ask them to send you a set of vista recovery discs and also ask them if you have a vista recovery partition on your hard drive to reinstall vista back to factory standards

  you will normally need to press F10 or F11 at startup to start the recovery process vista back to factory standards

  Ask them the sequence of keys to use to start the process from the recovery partition

  If in your question that you mean how do you do maintenance work on your existing operating system, please let us know

  Walter, the time zone traveller

• The system restore function is unable to do with the error "no restore points were created on the disk your computer system...." ».

  Original title: where is my last system restore?

  I am under W7 SP1 on an Acer Aspire 7720Z computer laptop and when I try to use the system restore get them all is a box saying "no restore points were created on your computer's system disk. To create a restore point open System Protection. "When I open the protection system and then configure the" C"drive, nothing happens!  I have not tried to use the restore of the system for at least 2 years, but when I lost Autoplay I thought that I would give it a go and the above is the result.  I must say that I solved the problem of AutoPlay (it's a program called VMWare has changed the registry) and after that I put the registry to what it should have been, then, everything is ok.  I would really appreciate someone tell me what is the problem... Thank you

  "Hi

  I hope that you realize that, if in the case of the system restore's restore points is deleted
  This is perhaps the reason why
  to enable the system restore
  You can follow this
  http://www.malwarehelp.org/how-to-disable-enable-system-restore-turn-System-Restore-on-or-off.html
  and for all troubleshooting in advance
  go through
  http://www.askvg.com/fix-system-restore-point-creation-configuration-disabled-by-group-policy-or-system-administrator/

• Satellite L 40 Vista Premium - cannot read the original system restore disk

  My satellite L40 was bought a year ago, and so far I never needed the system restore CD. But now I have a missing system file so I will try to re - install. But my computer will not read the CD, if I insert it before starting my computer or windows Vista.
  Is there a way I can download the CD to restore the system on the Internet?

  Hello

  No you can't download because that would hurt microsoft license stuff. I recommend you ask a partner in your country for replacement, if your machine is still under warranty.

  Please go here and find the service provider nearest to them for help.

  Welcome them

• in the system restore, why the previous months are cleared from the restore points? It shows only the current month.

  Windows XP operating system

  System Restore can record only as much as is will insert in the allocated space restore points.  Once the space is filled, older restore points are purged as new ones are created.

  By default, the system restore allocates 12% of the score, he's being followed.  On today's big hard disks, which can cause a huge allowance for the restoration of the system, which in turn can cause problems.  For best results, set about 1 GB space.  See http://bertk.mvps.org/html/diskspace.html

  In any case, try to restore to a point more than a week or so old just asked in trouble.  See the FAQ here, particularly #10 and #16--> http://bertk.mvps.org/html/tips.html

• PC is slow and get the message insufficient disk space

  my PC is slow and I get a continious pop up indicating "you run low disk space on the local disk C:.

  What should I do?

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 5 and 10 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• can not get the system restore to work

  tried to get the system restore back to an earlier time. says I need to get rid of the useless programs.did who. I have also some icons for files, tools or downloads

  In addition to what has been mentioned, consider the following:

  First of all, what is the last time that the restoration of the system worked?

  Check your system restore settings:

  1. Click Start
  2. Right click on my computer
  3. Click on Properties.
  4. Click on System Restore
  5. If system restore is enabled, the column status of a player will show surveillance.
  6. If not, you can delete ""disable the system restore on all drives ' and then click on OK to activate "

  Is both as soon as you try to restore to the most recent available? If so, unless you have specific reasons to keep the previous restore points, clean the rest, so that you have the most recent restore point on the left.

  To do this:

  1. run Disk Cleanup

  2. click on more Options

  3. under system restore, click cleaning of

  4. click on OK

  This will free up the space. System restore needs a minimum of 200 MB of space to work.

  Reference: http://support.microsoft.com/kb/300044

  Hope this helps

  Post back if necessary

  _________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The system restore points, how can be stored/kept?

  I had problems restore XP on the computer of a friend.  I can't after installing SP3, a question that will be asked in a separate post.

  In an effort to not having to do a full system recovery on the computer in question, with this latest attempt to recover the operating system and install all updates, I started the creation of restore points for the system after each step, I took to get things running and upward.

  And that is, after installing SP3, with installation fails and then going back until the restoration of the system to an earlier configuration, I found none of the points longer existed the system restore.   :-(

  Is there a maximum number of restore points in the system that can be stored in XP and later Windows operating systems?

  Hey, Jose,

  I'm sorry for the late reply to your post, but I removed the weekend baby a bad back that makes me mad.

  I'll try to put your comments in quotes, with my response immediately after, flea.

  The hard drive is 160 GB.  The car had 2 partitions, the recovery partition.  Before reinstalling everything from scratch, I've used Easeus Partition Manager Home Edition to create a 3rd partition to move the original data of C:\ drive to your new partition so my friend can sort files and keep it as he and his family want and discard the rest.  I just copy everything that I can, because I don't know who, what, and where they have stored files.  I actually found a file stored in the recovery partition, but I moved it.

  "Here are some reasons that XP will remove RPs.

  'http://support.microsoft.com/kb/301224 '.

  • Read the KB article.  To make sure that we are on the same page, I get "system drive" means C:\.
  • Lack of free space should not be a problem.  C:\ is 32 GB, 10.1 GB used.  D:\ is 111 GB, GB used 21.2.  E:\ is 5.98 GB, used 5.00.  E: is the recovery Partition.
  • No disk compression
  • Did not display the warnings system restore.
  • I do not turn off System Restore fo any player.
  • This isn't an upgrade of the system to an earlier version, I just turn on the computer the way it came, new out of the box.
  • The system was always restored from the recovery Partition.  I have a set of restore CD, but they have been written about the recorded side with a felt marker.  I have not tried cleaning off the coast, this will be my absolute last resort.   :-)
  • Disk cleanup does not give me tabs and options as mentioned in the article.  I guess that these show upward when you upgrade from a previous version of the operating system.
  • I don't think I'm under low disk space.    :-)
  • Does not not after the age of 90 days, nor have I have reduced the size of the data store.  I didn't know either of these possibilities before you read this KB.  See how the KB has been written, I suppose that these two parameters can be changed.  Can you point me in the right direction for how to do this?  I have a computer multiboot (XP Pro and Vista Ultimate Edition) and I would change the date of age never delete a restore point, because the computer is rarely used nowadays.

  "I don't know that when you install SP3 and it goes well, a single method to uninstall SP3 is to restore the system to the time before SP3 was installed:

  http://support.Microsoft.com/kb/950249

  This would mean that you would still RPs after that installation of SP3 (if things were favorably) and that was my observation. »

  • When I started to have problems, I simply started from scratch with a Destructive Restore process.  When I'm really frustrated after several failures, I started looking for a quicker way to get back to a point just before I installed SP3 and found this KB.  After that, it was the safe boot mode and using the Control Panel Add/Remove programs to remove the SP3.  And I got very, very familiar with the process!   Laughing out loud

  "Other things I can think can remove all restore Points are third party maintenance and system cleaning tools, poorly designed or introducing a third part malfunction anti malware tools, etc..".  Malicious software can disable the system restore (temporarily of course), but I never saw remove Restore Points.  The XP disk cleanup will also delete all but the most recent restore Point. »

  • Other Easeus Partition Manager, I never got far enough along to try any other third party software.  My "modus operandi" is updated completely OS and Internet Explorer before I install any other software and update it.  However, with the idea of the recovery Partition, do not not the software isn't an option.

  "If they are all absent, it always seems that a human element involved somewhere."

  • I learned long ago, the days of 8-bit, unless there is a real hardware failure, almost all computer problems can be tracked to a human being.
  • Not all system restore points were missing, just the first I created which is involved by creating a restore point after you change the system, such as the removal of my friend doesn't use software.  For example the software to connect to an ISP with a modem.  They got the DSL.   :-)
  • All deletions of software would help speed up the computer for his own use.  The rest of the family is like me today, Mac users.   :-)

  "To answer your question:

  The settings default for the accumulation of Restore Points is 12% of the size of the monitored hard drive or 90 days (both values are adjustable of course).  Microsoft seems to draw attention to the way in which the Restore Points "live."   "Then, the oldest Restore Points will start to get deleted to make room for new Restore Points (see also KB950249).

  • 12%, eh?  Is it possible, in fact, I have exceeded this number by 12% by creating too many restore points?  Knowing what I was doing, which seems to be a possiblity says, as restoring all points were never deleted, only the earlier.

  I'll certainly post the info you suggested in the post on the SP3 forum.

  "Do or do not. There is no test. »

  • "Luke, the force is with you." :-)

• Blue screen on startup, the system restore / repair did not work?

  Hi, I get a blue screen on startup and cannot start windows - with the error code x0000007E.

  I followed the steps on http://support.microsoft.com/kb/958233#StartupRepair however runs the repair does not work, and did the system restore.

  Will be saved my files / is there a way to fix this? Thank you!

  Hello

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error - the file name, directory name or volume label syntax is incorrect. "(0x8007007B), when you exit the system restore.

  Original title: System Restore problems

  Hello, I am running Windows 7 Home Premium 64-bit classic mode.  My system specs are listed under my signature.

  Before installing a program today, I went to create a system restore point.  In system properties > System Protection, I see that in the Protection settings > disks available there are two instances of the C: drive tagged like this:

  HDD0 (C :) (System) Protection on (selected)
  HDD0 (C :) (Missing) Protection on

  This is probably due to having recently replaced my C: drive with a disk larger to help to restore from a System Image backup.  The installation seems to succeed.  (I use now!)

  Note: other readers in Protection settings are showing off Protection.

  When I clicked on "Set up" in system properties > System Protection, I have seen that in the restoration of settings, the box "Turn off active Protection" has been selected.  I put the option button "restore system settings and previous versions of files.  In space, the slider was set to 0.  I put it to 1% (857,54 MB).

  When I tried to leave the system of Protection for the dialog to HDD0 (c) I got this error:

  There was an unexpected error in the property page:
  The file name, directory name or volume label syntax is incorrect.  (0x8007007B)
  Close the property page and try again.

  I deleted all restore points, then created a new restore point.  Current usage shows now 29,48 MB.  I still get the error when I try to the OK from the dialog box.  When I click on the system restore and start the Restore Wizard that I can see the restore point, I just created.

  Any help to banish the fake player available and messages will be appreciated greatly.

  -Dave

  ASUS P7P55 Deluxe
  PC power & cooling silent 750
  Corsair CMX8GX3M4A1600C9 (x 2 4 GB DIMMS)
  ZT-98GES3M-FSL ZOTAC GeForce 9800 GT 512 MB GDDR3 256-bit PCI Express 2.0 x 16
  Drive0 (OS) SSD OCZ Agility 2 OCZSSD2-2AGTE90G 2.5 "90 GB SATA II
  Reader1 (data) HITACHI UltraStar A7K2000 2 TB 7200 RPM 0F10452 / MIN 32 MB of Cache SATA 3.0 GB/s
  Lecteur2 (Apps, pagefile, Misc) SSD OCZ Vertex 2 OCZSSD2-2VTX50G 50 GB
  Drive3 (Web data, configuration files Pgm) OCZ SSD Vertex 2 OCZSSD2-2VTX50G 50 GB

  Hey DaveMcKeen,
   
  The error 0x8007007B occurs when the system is configured to store restore points to a location or a bad way.
  
  Set the path to the appropriate Windows 7 restore point.
   
  To remove this error message, follow the following solution:
   
  Step 1:
   
  To set the path of the appropriate Windows 7, restore point as follows:
   
  a. Click Start.
  The Start Menu appears.
  b. type sysdm.cpl in the start search box and press .
  The user account control window will prompt you for permission to run the program.
  c. click on continue.
  The System Properties window appears.
  d. click on the System Protection tab.
  e. under automatic restore points, uncheck all invalid location or duplicate
  f. Click to check drive C: with the Windows Logo
  g. click on apply, and then click Ok
   
  Step 2:
   
  Create a system manually restore point:
   
  a. open system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.
  b. in the left pane, click System Protection, if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click on the System Protection tab and then click on create.
  
  d. in the System Protection dialog box, type a description, and then click on create.
   
  Reference:
   
  create a System Restore Point:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point
   
  System Restore: frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions 

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.