Package and launch in Wellington

Similar Questions

• Can package and launch of the emulator of the ripple

  Hello

  I am able to build and verify my application using the emulator to ripple. When I try to deploy the application on my PlayBook, I learned that the build succeeded. I also see the bar file successfully created in the output folder. However, I don't see the app on my PlayBook.

  I confirmed that my debugging chips are not yet due and I also checked to make sure that the mode of development and the device password is correct. I also checked that the settings of the emulator of undulation for IP address matches that on the device. I use the developer version of beta of the operating system (2.1.0.560) and use the stand-alone emulator Ripple (not the chrome extension). I develop using the Tablet OS SDK than BB10 sdk currently not support directory and file API calls.

  I don't know what else to try because I do not receive the error messages and the app seems to have been built very well, but fails to install/launch.

  REDA

  Hi Nuno,

  Thanks for the comments. I managed to pack with the extension chrome as well, but he would not launch on the playbook. However, I was able to find a workaround. If I package and install from the command line using bbwp and deploy blackberry, it seems to work correctly. I can live with that for now.

  Thank you

  REDA

  Update: the problem with the emulator of ripple is also solved thanks to this thread.

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/cannot-install-with-ripple-plug-...

• [Training] The package and the launch does not work

  I try to use the "Package and launch" option in the drive and doesn't seem to work.

  I've specified that correcting the IP and the password as the playbook in the settings. I get the message "Build successful" but the Simulator does not launch the app. He remains in the home screen.

  REF: I checked and the Simulator is sensitive.

  Thank you.

  Reset the Simulator toured (took a few resets for me).

• Ripple Emulator - construction and launch - no launch - Debug token issue

  It's a piece of help and advice for you all so fall you on this

  After you install the emulator of ripple correctly using the download here:

  https://developer.BlackBerry.com/HTML5/download/ripple

  And don't forget to follow this document:

  https://developer.BlackBerry.com/HTML5/documentation/ww_getting_started/Use_the_Ripple_emulator_Chro...

  I got a job of waving emulator.

  Also I could pack my application, but try to launch it directly on my device BB10 Dev Alpha never happened.

  No error displayed I had no idea.

  Using the graphic help trying to install the created device / .barhe told me that the author does not match the token author correction.

  Which is strange, I had copied this author name 1-on-1 for the config.xml file.

  After doing a manual generation using the. / bbwp v1.0.0.7 BlackBerry WebWorks SDK resources, I have seen that he has failed to get the debugging token.

  As I had not seen anything in the documentation I took a wild guess and copied on my debugtoken in the same directory the. / tool bbwp resided.

  This corrected the manual version and also the option Package and laugh in the emulator to ripple.

  If the solution is to copy the peripheral debugtoken BB10 Dev Alpha V1.0.0.7 of SDK BlackBerry WebWorks directory.

  If this is something that must also be saved in the incident handler, please let me know.

  Hope this helps some of you running into the same wall.

  To solve the problem that the package one implemented does not when you deploy directly to your BB10 Dev Alpha device, copy the file debugtoken.bar in the directory of BlackBerry WebWorks SDK V1.0.0.7 where als othe. / bbwp resides.

• using ripple to package and sign

  I try to use the "Package and signature" feature in Wellington. However, I get the error message "Oh Snap!" Build request failed with [error] unable to connect application - failed to find signature keys"

  Under settings... I have:

  SDK path: C:\Program search in Motion\BlackBerry WebWorks SDK 2.2.0.15

  The project root: C:\Program Files\Apache Software Foundation\Apache2.2\htdocs

  Archive name: HelloWorld

  Output folder: C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\package

  I copied my old signature keys that I used to sign my BB-Java apps with in the folder SDK WebWorks 2.2.0.15\bin. Don't know how to "install" my signature keys.

  Help, please...

  Just found out from the area of developer that is not supported. I have to use the command line.

• Is it possible to have the photograph for $9.99 package and sometimes add the unique program of $29.99 every so often?

  Years, I had the complete package and pay $55 / month. However, my job has changed and I barely use as many programs as I did so I was throwing a lot of money for something I don't need. All I really need is Photoshop, Lightroom and occasionally Flash or AE. It is rare that I use Flash and AE these days but it is launched once in a Blue Moon so I wouldn't cut them completely. I was wondering if it is possible to have 2 plans to go. Have the plan of $9.99 ongoing photography and sometimes add the single $ 29.99 program, when I need one of the other two?

  Also, if I switch my package is the switch without welding or do I need to re - install these programs? I lose information or settings in my current programs of the PS or LR?

  Thanks in advance for the help

  What I want to know and have asked above, is whether it is possible to have both the package being photography (annual plan of $ 9.99 / month) AND add a monthly (monthly plan of $ 29.99 / month) whenever I need for a month here and there.

  In other words... is it possible to have 2 packages running at any given time?

  Yes.

  You can subscribe to the Plan of photography (12 month contract) + unique App (monthly) at the same time on the same Adobe ID. It's going to be two separate monthly fees when you run the monthly Plan of single App too.

  You can pay for the monthly as Plan and when you want for a month at a time to the higher rate than a 12 month contract.

• Hi, I have Internet data in my package and I just switched to iPhone 5 4 s, I have to change my number to my new sim card and all is works well but when I go out I do not receive my internet, No 4 G or 3 G appears in the corner, everything is turned on?

  Hi, I have Internet data in my package and I just switch to an iPhone a 4S 5, I have to change my number to my new sim card and all is works well but when I go out I do not receive my internet, No 4 G or 3 G appears in the corner, everything is turned on?

  Contact your carrier and make sure that your account is configured correctly. Then go to settings/general/to comments and press the network name; This will cause the exceptional carrier updates to install (you will see a dialog box saying if an update is needed). In addition, go to settings/general/reset - Reset network settings if none of these fix. You will lose the WiFi passwords, but nothing else.

• Satellite M50 - 130 - Touch and launch software does not

  Hello

  I recently had my reinstalled M50 - 130 as he had a huge virus problem and the man who did it, did not reinstall all my drivers and utilities, so I've downloaded from the Toshiba page.

  Problem I have is that the software ' touch and launch "doesn't appear when I clicked through my Start menu or via my computer, I tried, put it back, but not luck. Anyone got any ideas? Because miss me it!

  Thank you!

  Hello

  The launch and the Touch utility is available on the European driver from Toshiba website. It s a 1.2.7.0 version. The Touch and the launch is a program to facilitate various functions using the touch pad.
  After installation, you should see it in the touchpad settings.

  You know the installation of drivers and tools?
  It s a little more tricky, the proper installation order is necessary to run the application correctly.
  You can find the installation instructions in the document of Toshiba, which was placed on the driver page.

  Believe me, many years ago, I was a newbie to Toshiba, but since several facilities of OS on my two computers laptop Toshiba, I discovered that the proper installation order is very important and necessary.

  So check it out buddy

• FPGA device configuration, package and speed grade.

  Hello.

  Where can I find the news of grade package and the speed of the FPGA inside of the PXI-7842R? I ask because I want to build a project XPS in the Xilinx XPS and program needs this info.

  I followed the example in the "how to use designs based on Xilinx Microblaze with NI LabVIEW FPGA 2009 and the R-series modules". There, he gives the info for the specific FPGA (PXI-7852R and PXI-7953R) they use. It's a Virtex5, ff676, xc5vlx50, level-1 speed, but the authors do not mention where one can find this info.

  Thank you

  Bill.

  Nevermind, found the info in this way:

  Instruments\LabVIEW national 2010\Targets\NI\FPGA\RIO\R Series\Pxi-7842r

  Bill.

• Error - "Launcher requires the write permission for World of Warcraft key to locate and launch the game successfully. Please turn on write access to the registry key with the help of an administrator account"

  Original title - edit registry of the world of Warcraft Launcher to write

  I downloaded the patch more recent game in my computer, I did a cleanup of the system and tried to log in again, but now the States window it "(Launcher requires permission in writing for World of Warcraft key to locate and launch the game successfully." Please allow write access to the registry key by using an administrator account)", how can I access the registry to resolve this problem? Help please

  Hello DaTurtle !

  I had exactly the same problem, I have not found the sollution here...

  But I found how to fix very easy !

  You do a right click on the WOW icon at the office-
  then browse to the location of the file -
  It will appear a lot of files-
  Click on the WoW program file instead of the pitcher-
  will start your wow game-
  Log in as normal-
  then he will come to the top to update...

  After the update your wow will work as usual!

  It worked on my computer, please respond!

  Hans_Craft

• How can I get a .wmv attachment to be recognized by XP and launch WMP?

  I get attachments with my emails, and when I go to launch I get an error message.  If I save the file on my computer and launch from there I have the opportunity to choose a program.  I chose WMP and it works every time.  It says that I need to change a setting in the tools folder?

  Try these steps...

  Click right one. WMV file, and then click Properties.
  Change button... Select "Windows Media Player".
  and left click... OK / apply / OK.

  Or... try adding the. WMV extension to the File Types list.

  On the File Types screen... left click on the button 'new '.

  Type of WMV in the white field.

  On the left, click on the Advanced button.

  Open the drop of "File type" and select:
  ' Windows Media Audio/Video File "/ OK.

  Now, try the steps in my previous message.

  (Make sure that it says open to 'Windows Media Player')

• Download and launch of pdf

  Hey guys,.

  So, I come across a situation where I need to download and launch a pdf in my application. I've already implemented lance using an Adobe pdf file call (and it works very well) but every time it will open the pdf file, I get an error "the document cannot be opened because it is corrupt or damaged. It seems therefore that my download process and saving the file pdf is wrong.

  To download the pdf, I have simply make a request to the url and save the data returned in a file. Clearly, I don't have a good understanding on what do I do to download/save a pdf file. Here is how I currently save the pdf:

  QByteArray pdfData = reply->readAll();
  
          QString url = reply->url().toString();
  
          QStringList urlSplit = url.split(".");
          QString fileType = urlSplit.at(urlSplit.length()-1);
  
          QByteArray bytes;
          bytes.append(url);
  
          QString fileName = QString(QCryptographicHash::hash(bytes, QCryptographicHash::Md5).toHex()) + "." + fileType;
  
          QString fileTargetUrl = QDir::currentPath() + "/data/downloads/" + fileName;
  
          QFile textFile(fileTargetUrl);
          textFile.open(QIODevice::WriteOnly | QIODevice::Unbuffered);
  
          QTextStream textOut(&textFile);
  
          textOut << pdfData;
  
          textOut.flush();
          textFile.close();
  

  Is there something wrong with the way I do things? If so, what can I change to correctly download the pdf?

  Thanks for any possible help,

  -Jeff

  OK, so I found the problem. First convert it the reply-> readAll() in a QByteArray caused an error with the data of the pdf (bribery of encoding of pdf files). If the answer is directly inserted in the data file are not getting corrupted.

  Here is the code works:

  QString url = reply->url().toString();
  
  QStringList urlSplit = url.split(".");
  QString fileType = urlSplit.at(urlSplit.length()-1);
  
  QByteArray bytes;
  bytes.append(url);
  
  QString fileName = QString(QCryptographicHash::hash(bytes, QCryptographicHash::Md5).toHex()) + "." + fileType;
  
  QString fileTargetUrl = QDir::currentPath() + "/data/downloads/" + fileName;
  
  QFile textFile(fileTargetUrl);
  textFile.open(QIODevice::WriteOnly | QIODevice::Unbuffered);
  
  textFile.write(reply->readAll());
  textFile.flush();
  textFile.close();
  

  -Jeff

• Package and sign

  Hi all

  I use mac and I tried to package and sign with ripple and this is the error I got

  "Oh Snap!" "Build request failed with the message: [ERROR] CAP exception has occurred.

  Really need help heeeellllppppppp

  Use the search .

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/RAPC-exception-occurred-v-doesn-...

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/Hello-world-app-RAPC-exception-o...

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/error-compiling-WebWorks-app/m-p...

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/problem-with-number-of-files/m-p...

  You probably have a syntax somewhere error...

• How can I load and launch my app (.cod) at Simulator startup?

  I wonder what is the solution to load and launch my app (.cod) at Simulator startup?

  I found that I can load the cod file by using the command FledgeController and LoadCod, but I do not see the low method to load the installed application?

  Can you please provide guidelines for automatic start of installed applications?

  You can set your application to automotive performance at startup in Eclipse.  To do so, open the BlackBerry_App_Descriptor in your project and check "auto-run at startup.

  There is no support in fledgecontroller for the launch of an application by name.

• Cannot get my BlackBerry packaged and signed application

  Help, please.

  I am currently submit a deployable package for testing to my clients who are waiting to test the application, and I was stuck with it. During packaging and signing, the progress indicator is stuck at 99%, and the window "Tool of signed" says "Receive the response" all the required signature and doesn't get anywhere.

  I decided to try it with the simple "HelloBlackBerry" application (you know, like "Hello World"), and it does not work either. Note that he had worked until I think that last night. Is there something to do with the BB Signing Server?

  Urgent response appreciated my customers are waiting on the other end.

  Thank you so much in advance.

  It is Java. BlackBerry Java plug-in Eclipse. BlackBerry API 5. Windows XP, packaging for 8520 (but one last question?). Do not worry about that now, however. Another machine was able to package and sign, so I was saved, and the package was delivered to the customer. But it still doesn't on my PC the last time I tested.

  But the project is, and I think this will be my last project of BlackBerry. Honestly, it was a real pain, and we decided to stop accepting the BB development project for good.

  Thanks anyway, The_Anomaly.

  PS since this topic is not really resolved. Do you know what I have to do?