Satellite M50 - 130 - Touch and launch software does not

Similar Questions

• Satellite L350 - key FN and F9 touchpad does not work

  Hello

  I have a toshiba Satellite L350 with Vista 32 bit and my problem does NOT work FN keys.
  I installed already Synoptics Touch Pad V6.3 from Toshiba Web site, but it did not help.

  I searched for other software mentioned on this forum, but I could not find.

  The biggest problem is that my touchpad is locked, and fact without work FN + F9

  Use me keyboard just - what is difficult and annoying :(
  I'd be really greatefull if anyone can help me :(

  Hugs,
  Kate

  I agree with Akuma
  You need the PPV for the FN keys work.

  PS; If you want to use the Toshiba OS preinstalled, so everything should work properly!

• URGENT: Quick Launch software does not

  Hello

  I had formatted by laptop HP G42, whereupon f3, f2 and brightness keys do not work.

  I was told to install software quick launch for her since this link - http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104698-1&cc=us&dlc=en&lc=en... that I had tried to install however, told him that I already have a Quick lauch in my PC. When I checked, I already have a Quick Lauch 2012 C softwareshore that I tried to run, repair and also uninstalled and installed the same new however, f2 and f3 still does not.

  I also tried to install the new software from the link mentioned however, f2 and f3 still does not.

  Kindly help solve as soon as POSSIBLE because I have to use laptop every day and brightness should be adjusted. Kindly solve as soon as POSSIBLE.

  Kind regards

  Isha Abrol.

  Ok...

  I didn't know that you have Windows 7 32 bit installed.

  I gave you some 64-bit drivers.

  This is why you got this error... Make sure it is designed to work with Windows for 32-bit systems

  See if this graphical 32-bit driver works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-90548-2&cc=us&DLC=en&LC=en&OS=4062&product=4301647&sw_lang=

  Try the manual installation, if auto installation does not work, but this time navigate to C:\SWSetup\sp50871.

• Satellite M70 - 181 - slider and escape key does not

  FN with F10 keys shows no reaction.
  Check all the drivers.
  But cursor and escape keys does not.
  Need help please

  Joe

  As far as I know, FN + F10 or FN + F11 active integrated keyboard and cursor control keys.

  Satellite M70 is a fairly old machine and I do not remember which driver may be responsible for this control. Try to reinstall the Toshiba Accessibility or FN-esse utility. Maybe this will help.

  I had M70 long ago, but I've never used this option.

• Satellite A300 - dvd, usb and card reader does not work

  Help needed please.

  Have a laptop Satellite A300, running vista.

  Until a few weeks ago everything good, then noticed the cd did you not recognized and disk in it. The card reader can't find anything on the card (and Yes, the card was full.)

  The usb scanner is recognized as an external memory card and the other usb port does not fuction.

  I have not installed or don't remember changing of settings or do whatever it is the habit.

  Any help or thoughts would be appreciated.

  Hello

  Your ad is very confused.
  > Until a few weeks ago everything good, then noticed the cd did you not recognized and disk in it.
  Well, there are several reasons for this; It would be possible that the inserted disc is not completely compatible. Try different drives from different manufacturers.
  It would also be possible that the STRANGE laser lens is dirty. In this case, you might clean using a cotton ball and alcohol tip. In my case it helped.

  > The card reader can't find anything on the card (and Yes, the card was full).
  Did you use a compatible card? The laptop runs these cards:
  8MB - 2 GB SD card
  SDHC - 4 GB card
  -16 MB - 2 GB xD Picture card
  Memory Stick - 8MB - 256MB
  Memory Stick Pro - 256 MB - 2 GB
  MultiMediaCard - 8 MB - 1 GB
  miniSD (with SD adapter) - 32 MB - 2 GB

  I recommend also to format the card and to copy files from computer, and then test this.
  You can also reinstall and update the driver for the card reader controller...

  > The usb scanner is recognized as an external memory card
  Can't believe that you must use a scanner software (must be provided with the scanner) and have to test this unit. By the way; for the most part a scanner driver must be installed in order to use this

• BlackBerry Smartphones Blackberry Bold 9930 update failed and the software does not load

  I have a Blackberry Bold 9930 and yesterdasy I received a msg saying to upgrade to 7.x software Blackberry. I followed the instructions (takes too long like 2 hours to download) and then. Big mistake because it cooked my phone. It seems that when you upgrade, the upgrade process goes thru, but stops after the time zone to restore the process and reports an error 602 with a reset button to reset your database. The reset button does not work and I restarted the phone to restore the db. At the moment that it restarts, launched the process, and even once, it failed after the msg indicating time zones (100% and overall restoration treatment 7%). Zones roughly completed, but then I got a msg saying I wandered 602 belive. On all courses was about 5 to 10 percent. Now my phone is undesirable because it does not restart. Verizon says they have a large number of phones across the country, but BlackBerry says it's a matter of Verizon...  Someone at - he already heard of this I am now without such a 4 days while I get a replacement Friday because of the holiday...  I am not very happy as another question, I found - during the upgrade process it used the cells instead of my wirelss home network to download the software and it really took about 2 to 3 hours, then another hour before it failed during the upgrade process. So about. 3 to 4 hours to play with an upgrade yesterday.

  Thank you

  Rich

  Hello merlin02131

  Welcome to the Forums of the BlackBerry Support

  Sorry to hear about the problem you are experiencing during the update!

  But you can still use Desktop Software for the update process, personally, I prefer never to do an Over the Air update. I think that something has gone wrong with the update process and thus you encounter this error 602.

  You have a backup of your device, or using BlackBerry protect for the backup?

  If you wish you can try several method to recover your device of this error, all you need is a PC and an Internet connection active. But attention, this method deletes the data user in this device. This is the Knowledge Base to follow:

  KB10144 : How to force detect the BlackBerry smartphone using the Application Loader

   

  Additional information:

  KB29237 : "App Error 602" appears on the BlackBerry smartphone running BlackBerry 7

• Satellite L505 - decimal button and '8' pad does not

  Hello

  My buttons decimal and 8 on the numeric keypad of my laptop does not work. It seems to work after a few minutes of bashing alt + ctrl + shift + fn + keyboard arrows keys, then as soon as I move away from my computer it stops working again. does anyone have the solution button to turn on? also, does anyone know how to disable this?

  Thank you

  > can someone give me a link for the drivers for the keyboard? satellite l505d? I can't locate them.

  Keyboard drivers are part of the Windows operating system. You can not download this driver separately
  Usually, if remove you the keyboard from the Device Manager, then reboot again, the Windows operating system should recognize and automatically install the keyboard driver.

  > the key 8 has worked now... I was just overwhelming the shiftaltctrlarrows buttons.
  But it seems that the buttons work now

• Satellite L40 - 16 d and WXP - WLAN does not work

  After you install windows xp on my toshiba l40 - 16 d (psl48e) wifi does not work!

  maybey upgreate BIOS solve the problem?
  the problem is this model doesyn can't hawe no support on toshiba - I do not know I can download the new bios and soft to bios upgreate

  Anyone know?

  > bios maybey upgreate solve the problem?

  Update the BIOS?
  Why the BIOS updated so the WLan has worked properly with this version of BIOS before installing Win XP again?

  I think that you have not installed the right WLan driver.

  Satellite L40 - 16 d belongs to the series of PSL48.
  The drivers are available on the page of the Toshiba UE driver:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?
  Note: You must select Archive first Optional product Type

  In addition, you can choose WLan driver: Realtek RTL8187B because the cell phone was equipped with such a WLan module.

• Satellite M30-604 freezes and the fan does not work after replacing

  Satellite SM30-604. Laptop has left the mat from one day to the next and overheated! Fan won't spin and laptop start only occasionally. Thinking that the fan was fault I replaced the fan but even this new fan doesn't spin. The heat sink is totally clean - dust free inside the fins at all. The laptop is only 2 years.

  Cooling using forced (by sticking a nozzle of aspiration to the output of the cooling fan!) the laptop starts sometimes as normal until the desktop screen with all of the usual icons and no error message. But then, it does not further - the freezing of the screen, keyboard and mouse.

  Most of the time it does not start at all. When it does not start, the blue LED lights up but there is no hard disk activity or LCD at all - even the wifi LED lights even.

  Really grateful if someone knows what's going on. You are not sure if it is the main processor that is defective?

  Thanks in advance.

  Charlie

  Hello, Charlie

  As you know on this path is not easy to give an accurate diagnosis, but according to your assignment, I guess there is a complex problem and unit must be properly verified. I also think that there must be a problem with the electronics.

  It is really possible that the motherboard needs to be replaced but, as I already said, it is not possible to say something specific about your problem. Try contacting Asp and you will see what they say.

  Good bye

• Satellite L300 - Vista - Touchpad and USB mouse does not.

  Hello

  Well well after hours of trying allsorts, I post here...

  Been given the laptop for repair as the touchpad no longer. No problem "I thought", simply plug a mouse usb to help me get around and re - install the touchpad... what a joke.

  On the right, the USB mouse is recognized as a hid device and work, according to the Manager of devices, but not when you move it... nothing...
  The Touchpad is listed as a Synaptics ps/2 touchpad and signals a Code 10 in section mouse device as well as listed as a hid and fully functional usb mouse Manager.

  Right... I have...
  Listed all devices, even the hidden nonpresent (devmgr_show_nonpresent_devices) and removed everything only account of any mouse, keyboards, etc...
  uninstalled the software synaptics via the program Panel.
  Restarted the laptop, and it starts with the touchpad is ranked again code 10 with the version of windows drivers.
  Drivers up to date using two different files of Toshiba for the touchpad, still Code 10
  Still, the USB mouse does not either.

  Someone enlighten me please on a fix for this...

  Hello

  Really strange what s my friend because normally a touchpad driver update should solve the problem.

  In any case, have you ever tried to use the Toshiba Recovery disk? Maybe it s just a software problem and a few important Windows files are destroyed or don t work properly. Reinstall Windows using the recovery disk Toshiba takes only a few minutes and there are already all the drivers and tools integrated. With these parameters (factory settings), the touchpad should work properly, and if not the touchpad or the motherboard needs to be replaced maybe.

  Good bye

• Satellite Pro A300 sleep and extended functions does not properly

  I have a new satellite Pro A300 PSAJ1E - 01E00VIT, and I find this problem:

  Sometimes (not always: maybe it depends on which program is running) in trying to put the computer to sleep or into hibernation, it does not stop, but only stop the monitor (Panel), while the fan goes on and the power light is green. Of course, a lot of energy consumption of battery!

  Then there is no other way to take off the computer by pressing the power button for a long time... but this is not correct!
  NB: my computer is always connected to a local network, and generally there are some browser windows open when I put it in stand-by mode.

  How can I fix?
  jomurray

  You must update the BIOS and must always close the programs and applications that ruin on the laptop before activating the standby mode or hibernation would be.

  I found this solution in this forum, and according to some people here it has solved similar problems

• Satellite P20: Fn + F5 and TV-button does not work

  Satellite P20, keyboard of Windows XP SP2 problem.
  When I press Fn + F5, the computer does not show that earlier the different display options. TV button does not work also. I can change the different views with my nVidia Display Driver.

  My keyboard is OK, there is no dust or liquids. I have the latest update of the BIOS and Windows XP Service Pack 2. What program controls the functions of the keyboard in this case?

  How do I fix this problem?

  Hello

  Of course, you have deleted something or preinstalled on your own operating system. Without Toshiba has designed tools and utilities, it won't work. I put t know exactly which of them are to do this, but please try to install keys Dritek easy button util. /Sticky V1.008, E - key utility and Toshiba Hotkey Utility.

  I hope this will help. If this isn't the case, please write again.

• Satellite P300-1CN - system and the BIOS does not start

  Hello!

  I have a problem with my laptop Toshiba Satellite P300-1CN. When I start my laptop does not start in Windows.
  When I tried to go to BIOS, doesn't let me do as well. I can see only the Toshiba logo. When I press F2 or F12 I received the message:

  + Enter in the configuration. Please wait + or
  + Entering the MultiBoot Menu. Please wait +.

  I tried + ESC +++ Power Buton + then + key + F1. I can see all the information:
  + Phoenix Bios 4.0 release 6.1 +.
  + Cpu = 1 processor detected, cores per processor = 2 +.
  + Intel Core 2duo T5800 @ 2.00 GHz +.
  + 3070 M RAM passed system +.
  + 2048 KB L2 Cache +.
  + Shadow system bios +.
  + Video Bios shaded +.
  + Fixed disk 0: Toshiba MK2552GSK +.
  + ATAPICD; ROM DVDRom... +.
  + Mouse initialized +.
  Press F2 to enter Setup or press F12 to enter MultiBoot Menu selection.

  but after the computer laptop just gel but the processor is still running.

  I removed the HARD drive and tried to put different the a (work laptop) - still does not
  I removed the memory and tried to put different the a (work laptop) - still no job

  I have no idea what it is causing the problem.
  I have this laptop over a period of 2 months.

  Thank you.

  > Looks like I have to make a phone call to the Toshiba Support Centre
  You must enter in Toshiba authorized service provider contact such as suggested by Luke above
  All the details can be found on the Toshiba page. (the path above will point you to the ASP database)

• Red Apple icon shown when loading the software containing the two Vista and Apple software - does not recognize Windows

  I recently bought 2 bits of software that contain the Apple and Microsoft (Vista) versions on one CD.  When I insert the CD into my Vista PC, it can not find or load the installation files.  Instead, if I look at what is on the drive, I see an icon of the Red Apple.  If I put the same CD on Vista PC to my wife, it loads correctly.  If I load the version of WIndows 7 software, it loads correctly and run the program until he acknowledges that the operating system is Vista not Windows 7.  Something triggered something on my Vista PC to do brand new loading on my CD player program needs to ignore files in vista and show files apple as if they were independent.  Is there a toggle for this problem?  If I run the software of Microsoft ' Fix It' - the solution that I see on most boards, it does not.  As far as I know, other Vista users are facing this problem without solution by MIcrosoft or any other tech tips.

  The problem is with a program from Mediafour.  It's called xplay 3.  If you uninstall this program, everything works fine.

• Satellite P200-199: Chicony Camera assistant software does not

  OK, that makes me crazy. I read all the papers that came with my new computer. I have been using / computers in construction since 1994. The camera on the P200-199 does not work, the drivers are not recognized on my vista operating system. I tried other select USB driver it, didn't work. Research on the cd of restoration for more than an hour - was not found.

  I've not seen anything listed at pages 4-8-4-9. There is NO Camera Assistant Software"located 5 research for it on my computer. Tried yahoo, aol, msn all who have web applications cam - none of those who built it in camera.

  Yes, with this in mind, where I can d/l the software for this camera to work?

  Hello Dave

  Before starting any discussion please can you follow me thing: has your laptop or you factory settings installed your own OS?

  By the way: I'm really confused you with as much experience PC don't know what is the recovery image?