Similar Questions

• Permissions applied to the Cluster or host to propagate to child virtual machines

  If I ask a Cluster folder read-only permissions or a host (for a particular group of users) with the propagate to child objects enabled, when a new virtual machine is created within that folder, the user is able to do much more than R/O.

  I know that we can create a VM (in a different vision) folder with the same R/O permissions, but that guarantee no new virtual machines will have this permission applied if these new virtual machines are not placed in a VM file at creation time.

  It seems that on the new VM creation, the virtual machine is not inheriting the R/O permission in the folder/Cluster host. This is the expected behavior?

  Thank you!

  I believe that the more restrictive permissions apply. I don't have that backwards?

  I should have been more descriptive.  If you have an ad group with say joe in this document, that the group is set to read only role and joe is in another group that has an administrator role, joe becomes and administrator.  If joe is added in as a user rather than a group, then the more restrictive role wins, so you are right.

• Problems with folder permissions after replacing the hard drive

  Hello

  Recently, I replaced the hard drive on my mac.  Already before the replacement, I got the files that I had locked.  Now I'm unable to open the file.  I get the error "the folder 'nom_de_dossier' can not be opened because you don't have permission to see its content".  I looked at the permissions for the folder and everything he says is fetch.  I ran a command in the Terminal and for one of the records in question, that's what I see-

  drwxr-x - 13 501 501 442 5 July 2013 MG

  Any help would be greatly appreciated!

  Running OS X El Capitan

  10.11.4 version

  Try this first:

  Start the mac all holding the SHIFT key, it is slow, connection, and then select Restart from the Apple menu.

  When this does not help:

  Reset password utility in the recovery Partition:

  1. Restart your computer from the recovery partition.
  2. Open disk utility and run a repair permissions on your boot volume (in ElCapitan click the first aid tab). Once this completed, close disk utility. We do this for good measure.
  3. Open a Terminal from the Utilities menu. Type in resetpassword and select your user (NOT administrator system/root) account in the menu drop-down.
  4. Click on the Reset button at the bottom of the window ACL section and Reset the folder permissions.
  5. Exit the utility password and return to the main recovery menu.
  6. On your keyboard, press ⌘ + Q and restart your computer. It is very important that you don't hold down the power button to exit the recovery session, or the ACL Reset to occur.

• Adobe PCD folder permissions change after the launch of CS5 programs

  There is a seemingly important issue for Creative Suite

  5 licenses: C:\program files (x 86) \common files\adobe\adobe pcd

  Unfortunately the default permissions after installation (standard installation or install Adobe enterprise deployment tools) are:

  Everyone: read

  Administrators: Full control

  This is a problem for the use of the software, if your users are not local administrators.

  If you change the permissions of the folder to grant access to other users, launch InDesign or Photoshop, Adobe PCD permissions back to their original settings.  I checked my permissions to save well by closing and reopening the folder permissions.  It is only after a CS5 program was launched to return permissions.

  How can I get residence permits?  So far, I make people admins local, which is not good, if they find out.  They will install all kinds of crapware and legitimate crappy software and break their computers more far.

  Thank you

  Josh G

  Portland, OR

  Found a solution to get Acrobat 9 Professional to work without giving users admin rights.

  1.), connect as admininstrator and give the control total of users on the following folders and all content (replace permissions on all child objects):

  • File Adobe in Program files.
  • Adobe common files folder.
  • Files common Macrovision.

  Run 2) program as admin first to get rid of some of the regisration and user login guests to try.  It should work now.

• By pressing the mouse wheel, opening some bookmarks in the new pages in a folder of bookmarks, WITHOUT the record closes. You can now open the time as a bookmark for each

  Annoying when you have bookmarks files in other folders of bookmarks.
  By pressing the wheel, or by choosing "open in a new tab", the new tab is automatically displayed on the screen, even if this option is not checked on the options for the generic firefox tool (the one on the menu bar).

  Try to use the bookmarks - {Ctrl + B} - bar will be open so that you can select multiple bookmarks.

• Folder level Javascript executes the Menu item, but not button - need a work around... Help, please

  I have a JavaScript that contains a function of confidence with a SOAP operation inside the confidence function.

  This function is inside a folder level script.

  When calling this function to a menu item, it works fine.

  When I try to add and call this function from a button or a Signature field to the title of JavaScript execution when signed, it will not work and I get an error message.

  What I'm missing and there is a work around, I need to run it from a button or a signature field?

  Any ideas?

  How to run privileged Javascript by a button

  //    1.  Need to put the necessary Javascript inside a function in the Javascripts folder

  //    2.  Javascript must be a function of trust

  //    3.  Add the call to the function of trust to the button

  //

  The Code for the button to execute a script Javascript on the Focus of the mouse is-> Trusted_CustomCode();

  //

  The following example is a JavaScript script at level folder for security reasons

  //

  The example code SHOULD BE wrapped in a function of trust which is part of .js in the javascripts folder

  //

  var Trusted_CustomCode = app.trustedFunction (CustomCode);

  function CustomCode() {}

  app.beginPriv ();

  Insert the custom JavaScript Code here

  App.Alert ("this is my custom Code that is running from a button");

  End of the custom Javascript Code

  app.endPriv ();

  }

• Not applied to the page template

  Hello
  
  I developed an application that uses the apex and it is integrated with E Business suite (EBS). When I try to open the BSE page page appears with a white background without that all the models even if some level models and custom page report are defined and applied to the page. Please note that this page appears in the development instance.
  That's the problem with Apex facility on this forum or any other setting in Internet Explorer, which is used.
  To add to this, I use IE6 on my machine.
  
  Please, help me to solve this as soon as POSSIBLE, because it is a matter of urgency.
  
  
  Thank you
  Ajith

  First of all, check the value of prefix of "Image" of your application. You can see the value in shared--> definition components.

  If you use Oracle HTTP Server to access the application, you must copy the directory/images /, which came with your APEX zip file in your root directory of the Document from the HTTP server. This is usually .../Apache/Apache/htdocs.

  If the prefix of Image of your application is different from that / images /, you must rename the value of 'prefix of Image '.

• Error starting InDesign CC: '... ". lack of sufficient permissions to access the folders preferences"

  InDesign CC

  After having successfully installed many apps CC on my Mac Pro desktop computer, I started to do the same thing on my laptop. However, after two attempts to uninstall and re - download the CC InDesign and creative cloud Office. When starting InDesign, several times I get this error message: "error: unable to launch Adobe InDesign that you don't have sufficient permissions to access the folders preferences.» Make sure that you have permissions, restart Adobe InDesign. "and can not go any further.

  I can't find any instructions on how to do it, or make reference to anyone else get this error.

  MacBook Pro

  17-inch, late 2011

  2.5 GHz Intel Core i7 processor

  8 GB 1333 MHz DDR3 memory

  AMD Radeon HD 6770 M 1024 MB graphics card

  Software Mac OS X Lion 10.7.5

  I saw this stock suggestion posted many discussions. I solved the problem with LiveChat with Support from Adobe:

  Mohammed: If I understand well you're not able to launch CC apps since it gives error "unable to launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Is this correct?

  Paul: Yes

  Mohammed: Open a Finder window. Choose go > go to folder. ~/Library type and you will get file Preferences.

  Paul: In the library now

  Mohammed: Are you able to find the Preferences folder?

  Paul: Yes

  Mohammed: Control-click on the folder and choose read information.

  Mohammed: Expand the section sharing & permissions.

  Mohammed: Click the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.

  Paul: done

  Mohammed: Please click on + icon and add the Admin and showing all users.

  Paul: done

  Mohammed: Set permission read/write for all users and the admin

  Mohammed: Click the gear icon and select apply point-to-point closed

  Paul: for each of the individual users and groups?

  Paul: one at a time?

  Paul: I did it.

  Mohammed: Open a Finder window. Choose go > go to folder. Enter ~/library/Application support and give all the permissions file to Adobe.

  Paul: Who is over... I have added all the users and groups, given to each "read and write" and extended permissions to all of the included items.

  Mohammed: Now please open a Finder window. Choose go > go to folder. File type support and give all the permissions file to Adobe.

  Paul: Okay, I understand... I proceed to your instructions.

  Mohammed: thank you very much.

  Paul: I'm done.

  Mohammed: Please close all Adobe Applications and then launch InDesign CC and let me know the result.

  Paul: OK... looking for good Mohammed far... fingers crossed!

  Paul: Thank you Mohammed... She has launched!

  Mohammed: Excellent, I'm so happy to hear this from you.

  Mohammed: I certainly appreciate your patience in this process.

  Paul: And I have yours.

• Lost access to the home user folder

  Hello. I seem to have lost permissions to access to my home folder in OS x El Capitan.

  If my user under Favorites folder-click, then nothing is displayed.

  If browse computer / user /... so I can see my user but it is shaded pale gray and no access is possible.

  Tried disk repair. No other question similar.

  My user has administrator access.

  I am still able to use the - Mail, Photos, iTunes - apps that access the files that are located in my home folder of the user.

  Ideas on how to access the home folder in the Finder?

  Hey RossM.

  I understand that you have a problem with access to your files and folders in your user folder. Let's see if we can get access to it.

  I would like to start by looking at your home folder permissions. If they are incorrect, you will need to make sure that you are the owner. Take a look at the procedure described below to take care of this.

  OS X El Capitan: If you do not have permissions to open a file or folder
  https://support.Apple.com/kb/PH22196

  Take it easy

• Change the storage profile (PAF) policy and apply to the home and VMDK

  Hi there, I need to change the policy of storage on a cluster with a value of virtual machines. I have follow-up vSphere PowerCLI 5.8 PAF Walkthrough (part 1): Introduction | VMware vSphere Blog - VMware Blogs, specifically, run this:

  Get-Cluster "mycluster | Get - VM "myvm.local" | Game-SpbmEntityConfiguration - StoragePolicy 'VSAN-FTT = 1 ".

  This applies to the new political profile is stored in the folder 'home' of the virtual machine, but do not know the VMDK, where the virtual machine is not consistent with the policy. How can I do so that it changes the policy I'm specifying the House and all the vmdk on the virtual machine.

  Thanks in advance,

  You must define the strategy of storage on hard drives as well as in an additional command, for example:

  $vm = get-Cluster "mycluster | Get - VM "myvm.local."

  $hd = get-disk hard - VM $vm

  $vm | Game-SpbmEntityConfiguration - StoragePolicy 'VSAN-FTT = 1 ".

  $hd | Game-SpbmEntityConfiguration - StoragePolicy 'VSAN-FTT = 1 ".

• Reports on the folder permissions

  How can I use powerCLI report on which groups active directory has permissions on a folder in the Server vCenter?

  The following script kind of handset 2 previous scripts.

  It allows to print permissions that applies models and virtual computers.

  But that can easily be extended to do the same for data centers and records. Also call the function get-permissions for the files and data centers.

  function get-permissions($vm){
      $vmImpl = Get-VM -Name $vm -ErrorAction SilentlyContinue    if($vmImpl){
          Get-VIPermission -Entity $vmImpl | %{
              Write-Host "`t" $_.Role $_.Principal $_.Entity $_.Propagate
          }
      }
      else{
          $templImpl = Get-Template -Name $vm -ErrorAction SilentlyCOntinue        if($templImpl){
              Get-VIPermission -Entity $templImpl | %{
                  Write-Host "`t" $_.Role $_.Principal $_.Entity $_.Propagate
              }
          }
      }
  }
  
  function get-children-reverse($entity,$path)
  {
      if($entity.Name -ne "vm"){
          $path = $path + "\" + $entity.Name
      }
      foreach($child in $entity.ChildEntity){
          $childfld = Get-View -Id $child        switch($childfld.gettype().name){
              "Folder" {
                  Write-Host ($path + "\" + $childfld.Name)
                  get-children-reverse $childfld $path            }
              "VirtualMachine"{
                  $vm = $path + "\" + $childfld.Name
                  Write-Host $vm                get-permissions $childfld.Name
              }
              "Datacenter"{
                  Write-Host ($path + "\" + $childfld.Name)
                  get-children-reverse $childfld $path            }
              "ClusterComputeResource" {
                  Write-Host ($path + "\" + $childfld.Name)
                  foreach($esxMoRef in $childfld.Host){
                      $esx = Get-View -Id $esxMorEF                    $h = $esx.Name+ "\" + $path + "\" + $childfld.Name
                      Write-Host $h                }
              }
          }
      }
  }
  
  Get-Datacenter | %{
      $dc = Get-View -Id ($_).id
      $folder = Get-View -Id $dc.VmFolder
      get-children-reverse $folder $dc.Name
  }
  

  The script will export all output to the screen.

  If you need it in a different format, let me know.

• The file I tunes is on a locked disk or you do not write to this folder permissions

  install iTunes on pc tha

  The file I tunes is on a locked disk or you do not write to this folder permissions

• How can I configure the 9 pages 'home' on the 'new tab '.

  There are 9 boxes 'home' to pin 9 sites on the 'new tab', for easy access to favorite sites.
  How I can pin to stay up, when I can't even bring up the empty spot?
  I know how to "attach" the tabs at the top and I know how to "pin" a page on the 'new' tab when it appears, but I can't force a page is displayed in the test at white spot.

  Here's how you can pin a website for the new rectangles of tab:

  1. Open a new tab.
  2. Go to your Favorites and find the Web site you want to pin.
  3. Drag the bookmark on the space you want to pin.
  4. Repeat steps.

  Thumbnails may not appear immediately. Open websites with missing images, just the pages they link to (do not go to the subpages), and then restart firefox. The thumbnails must be created now.
  If there is still some lacking, they are probably from a secure website (https).

• Why Firefox V19.0.2 open two instances of a page when I load the page fron a folder on my PC?

  If I save a web page to a folder on my PC and then click on it to see... Firefox opens two identical copies of the html file in two separate windows. Previous versions of Firefox has never done this, why V19.0.2 to do this and how then I stop doing that?

  I noticed information about resetting Firefox... I did, and now, the problem disappeared... I'll try to reset (now that I know how) to solve problems in the future. Thank you all.

• cannot set the default home page. home page goes to firefox. the default value in the internet settings and on firefox options help tab

  I went to Cont.Panel and set the default home page and then click on the button Firefox then options and under general set default homepage from Firefox to open but Firefox always opens to the Firefox start page. What can I do else?

  If you choose to restore the default home page then, yes home page on the Mozilla Firefox start page, see for info: How to set the home page

  See also: window - general Panel - Options boot

  Thank you