PageBase page content does not load

Similar Questions

• Captivate 9 - HTML5 content does not load

  Using Captivate v9.0.1.324. I have a few projects that does not load in a browser when published under the title of HTML5. When you try to load the index.htm page you see the loading icon (circle of rotation) and that's all. I tested with different browsers and on different computers and still have the same problem. The projects work very well in the SWF, and there is no errors/notices in the HTML5 Tracker.

  Unfortunately, the site which we use to review allows only projects Captivate to publish as HTML5 in a .zip package. Because the project never loads examiners are unable to make the remarks. I googled and searched in the Adobe forums and have not found any solutions.

  Any suggestions on how to detect the problem would be greatly appreciated.

  Some features such as the interactions of training will play only from a server, but apparently, it is not the case here.

  It could be a corrupted object somewhere, or more than one. Do you have question slides? Do you use training interactions?

  The difficulty is to find the 'guilty '. A possible workflow is to hide a large number of slides, publish and test again, then gradually add the slides more until you bump into the cause of your problems. I guess you used the project, Tracker HTML?

• Firefox 7 takes forever to load certain pages, or does not load completely, have markers from place to place and place images...

  Had the same problems with 6 Ff. 1/4 to 1/3 of the pages take forever to load. Sometimes I can make by highlighting the URL and pressing Enter. Sometimes the activity indicator turn right and pirouettes and page never loads. Mark-up appear sometimes where the images should be. Home of the New York Times, for example, partially supported (some missing images) but the links to take forever.

  Open the topic: config page through the address bar and do a search for network.http via the filter at the top of the about: config page.
  
  You can reset all network.http associated prefs which appear "BOLD" (user set) via the context menu to their default values.

  It is generally not a good idea to change these preferences, and these changes can have the opposite effect, by activating especially pipelining for servers that do not support this feature.

  • http://KB.mozillazine.org/Images_or_animations_do_not_load

• Blocker in Safari content does not load Web site

  Today, for the first time, Safari 9.0.3 will not connect me to Ancestry.com.  I checked all the preferences of Safari and nothing seems out of the ordinary.  Finally, looking at the console in Safari > menu to develop, I can see that a content Blocker will not Ancestry.com load.  How can I fix it?

  Check your third-party plug-ins extensions Safari and here.

• Smartphone app displays a blank Page and does not load

  My Webworks app installs without problem on the smarthpone.

  When I try to launch it by clicking on its icon, a blank page appears, and it just sits there.

  Nothing else happens.  I only have a web page in the program and it is called index.html.

  It's the first application for me, so maybe it's that I don't get something good in the config file. If someone could help me on this I would really appreciate it.

  Here's what I have in this file:

  
  http://www.w3.org/ns/widgets ".
  "xmlns:RIM ="http://www.blackberry.com/ns/widgets"
  version = "2.0" rim: header = "Streamer" >

  http://www.XXXXXXX.googlesites.com/"email ="[email protected]"> PL

  Streamer

  A streaming radio

  <>committees mode = "auto" / >

  
  onLocalPageLoad = "false" >
  
  

  
  
  

  
  Copyright (c) 2012
  THE SOFTWARE IS PROVIDED "AS WHAT ', WITHOUT WARRANTY OF ANY KIND,.
  EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE WARRANTIES OF
  MERCHANTABILITY, FITNESS HAS A PARTICULAR PURPOSE AND
  ABSENCE OF COUNTERFEIT. IN ANY CASE, THE AUTHORS OR COPYRIGHT HOLDERS
  BE RESPONSIBLE FOR ANY CLAIM, DAMAGE OR OTHER RESPONSIBILITY, THAT IN A
  ACTION OF CONTRACT, INSULT OR OTHERWISE, ARISING FROM, OUT WHERE IN
  CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER TRANSACTIONS IN THE
  SOFTWARE.
  

  I finally managed to do come. Don't know what the problem was, however.

• Particular site does not load in Firefox, but load on IE 9

  When I arrived at a particular site the page simply does not load and redirects me to the error immediately infamous firefox of the message of death
  "The connection was reset".
  The connection to the server was reset while the page is loading. »
  My windows firewall is off, I have no software security or malware on my system.
  And believe me, I have tried many things to try and solve this problem, but without success.

  The site running again after 10 + hours, Server service?

  It's ok now.

  http://www.codehook.com/
  

  Thanks again

• BEFSR41 works, but Setup does not load

  Hi all

  Weird problem.

  I have two PC hooked up to the same router, a BEFSR41. Both connect to internet just fine. You can access the page of configuration/admin to the router fine. On the other, however, the router asks you a user name and p/w, but the configuration screen never loads. I get the message "Loading" eternal, but it never gets there.

  Attempted fixes:

  Factory reset

  Firmware update

  Reinstall the NETWORK card

  Pass the CAT5 cable

  Switch port

  Cycle of modem, router and power PC

  Disable the firewall and AV

  Tried two different browsers

  Login ID and p/w is not incorrect, without typos. I done this 20 times less than today.

  I am writing to the PC with the question, while there are of course traffic and communication with the router. And I'll say it again, I get to the login screen every time. She accepts the ID and p/o, but the configuration page itself does NOT load. If I walk through the room and the connection on the 2nd PC, it works very well and I can't acess all the configuration screens.

  It's seriously making me crazy. Any help would be appreciated.

  Thank you!

  He solved. I do not fully understand, but I solved it. I'm frustrated and began uninstalling things rather than simply of deactivation.

  Problem was the AVG Anti-Virus Free Edition, v9.0.698.

  Open the AVG user interface, opening the shield component reside, then uncheck "Active resident shield", receive you a Windows warning that no anti-virus is active, as well as the red shield icon indicating a security problem. Windows Security Center, then opening and inspection of field Virus protection indicates that "AVG Anti-Virus Free signals that she is not".

  With this in mind, I was confident yesterday, since AVG told me I had turned off, since I had actually turned off.

  Evil.

  A background activity must remain on even when AVG tells Windows that it's off, because uninstall AVG has allowed me to access the router configuration page immediately.

  I have reinstalled AVG after confirming that the Linksys configuration page was now available with IE8, FF 3.5.5 and Chrome (it was). Settings by default after reinstall caused the problem to return: router request and accept p/w, but configuration page does not load. Then I started to turn off specific components of AVG from the user interface.

  Was of the AVG Active Surf-Shield, which lies beneath the LinkScanner component. Deactivation of Surf-Shield allowed me to immediately access the router configuration page. The problem and the solution are both reproducible by checking and unchecking this box a only.

  Stay two free ends (which frankly, I don't like enough about to mess with):

  (1) why doesn't AVG, and therefore Windows, report itself disabled when in fact, some elements of it remain active? The inability to really (and ideally) disbable the program without uninstalling all difficult troubleshooting.

  (2) why is the 2nd PC on the same network can access the router configuration screen, even with AVG Surf-Shield active and running? The only difference is that the PC with the problem solved now rolls AVG Anti-Virus Free Edition v9.0.698 and the PC that never had a problem running v8.5.425. It's curious because both computers have the same version of the virus database and the same version of LinkScanner (145). Remember that this is a component of LinkScanner causing the problem, so that both computers have the same version of LinkScanner is particularly weird.

  Thanks for the replies. I saw this question on several message board posts over the past two days, and I hope that this correction is useful to other owners of Linksys.

  Best,

  Krin

• Why Safary does not load the content of pages?

  Why Safary does not load the content of pages? I mean, when I hover over the places where should be the content, he is always showing the "redirect to: [email protected]/" lower left. My Safari is 9.5 and worked fine until Safe Fimder Virus get inside my computer. Mozilla Firefox is a bit slower. If someone could give me an idea on how to deal with it, I would be happy.

  Sorry if my English is not good, I am a Brazilian who is still learning English

  Your English is very good!

  Redirects are usually due to adware or malware.

  Download the run MalwareBytes.

  It of free and takes only a minute or two. Which should remove all adware and malicious software on your Mac.

• Content of the start page does not load in 11 IE or Chrome - RH11

  We went to RH11 specifically to solve the problem of known IE11 we had while we were running RH9.  When I installed the software, I applied all available patches, now at 11.0.2.240.  But when I try to generate a WebHelp project, in the output, the TOC loads, search bar charges, but the main content of the start page does not load.  Very similar to the old question of IE11.  It happens on both files the to this virtual machine and when they are responsible for the intenet.  My operating system in Windows 7 (as so far).

  Someone at - it suggestions?

  Ah ha.

  Worked well with an example project.

  Took a look at my files... the start page is a legacy file that has been through several versions of RoboHelp, at one point he somehow must have obtained some of the javascript HR calls in there - took the javascript code for the file, rebuilt and everything works again.

• Safari for Mac OS does not load certain pages

  After upgrading to Mac OS on my Mac Mini (end of 2011), everything seems to work properly. I rebooted the Mini just to be on the safe side. Everything went well. It was Tuesday night.

  Thursday morning, the first opportunity, I get to mess with it, I opened Safari, try to connect to my router Asus RT-N66U (with the latest firmware), but somehow Safari doesn't seem to like https, nor does it like .asp pages. Here is a screenshot of what's on my Mac Mini Safari:

  

  I then decided to download Google Chrome. I installed (never had on this Mac Mini), but the page works perfectly and quickly.

  I have reset everything I could on Safari, including clear them cache, clear history, tried the developer mode (no matter WHICH mode in there still gives the same results)... on the cable connections and wireless. Chrome works without a hitch, as Safari before Tuesday. Now, nothing...

  ... However some pages such as Google.com or Apple.com loading properly. I haven't checked if there are applets missing in the back or a dark rendering problem.

  Any ideas how to solve this problem? (I'll use Chrome until it is.)

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not

• The firefox home page does not load.

  When I click on the desktop icon, the home page does not load.

  Do you see an indication that Firefox is running? For example, a button/tab appears on the Windows taskbar with a thumbnail image of the window? If there is a miniature test, right-clicking on it and choosing expand them. Show the window?

  If nothing seems to be happening at all, no button, and no error, you use Webroot security software? On another user reported a change in the Webroot to allow Firefox configuration start: http://forums.mozillazine.org/viewtopic.php?f=38 & t = 2969819 & p = 14380601 #p14380601

• Firefox does not load one right of pages.

  for example his does not not right of the Mozilla page is - this loading facebook
  don't tell me to clear cache I did. I also uninstalled all my plugins and addons.
  It did not work. I used ctrl + shift + r key to reload the css of the page, it has not loaded.
  I reinstalled the browser, it does not even load the page with style sheets.
  view-> basic page style is also selected.
  I am running windows 10. I upgraded from 7 to 10 preserved .firefox profile of win7, but it got too slow loading of pages I refresh for her. Since then its charge is not some pages.
  Oh and my system date is correct.

  in case you're an avast user, please disable https scanning in avast:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

  http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/

• Https: / specific page does not load after udate to 38.05

  https://my.albertahealthservices.ca
  does not load after update of 38.05 on my desk.

  I tried it on my laptop and it will load BUT after having been undated to 38.05 also failed to load this page.

  Other secure pages (Bank) loading OK

  Works well in Chrome and IE

  Error message:
  The secure connection failed

  The connection to my.albertahealthservices.ca while the page is loading.

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  Thank you
  Brian

  The site may attempt to return to a lower version of TLS in a way that is no longer allowed in current versions or maybe use a deprecated suite of encryption.

  You can open the topic: config page through the address bar and use the search bar to locate this pref:

  • Security.TLS.insecure_fallback_hosts

  You can double-click the line to edit the prefs and add the FQDN (my.albertahealthservices.ca) to the value of this preference.
  If there are already websites (domains) in this list, then add a comma and the new domain (without space).
  There should be only areas separated by a comma in the column value (example.com,www.example.com).

  If this help you can contact this Web site and ask them to look into this and update their security.

  • https://developer.Mozilla.org/en-us/Firefox/releases/36/Site_Compatibility#security
  • https://developer.Mozilla.org/en-us/Firefox/releases/37/Site_Compatibility#security
  • https://developer.Mozilla.org/en-us/Firefox/releases/38/Site_Compatibility#security

• iTunes app does not load movie page

  This behavior started recently.  Every day I open the iTunes on my iPad app 4th gen (running iOS 9.3.2) and tap the icon of movies down to check what movie is on sale (for the promotion of July).  Usually, it does not load.  It sits right there spinning and say "Loading"... ».  I waited 5 minutes and it does not load.

  All other updated pages at the point.  If I let the music before page load I loss of movies and then hit movies, it just displays the page of the music with a black background instead of a white one.

  My current 9.3.2 iPhone has the same problem.  Yes, I killed the iTunes apps and restarted the devices without a bit of luck.

  Any ideas?

  Best regards, Patrick

  On both devices, try settings > iTunes and App Store > Apple ID > Sign Out > sign.

• Firefox does not load the flash of the Firefox home page

  Firefox does not load the flash of the Firefox home page

  It's not Flash, but a film WebM.

  <video xmlns="http://www.w3.org/1999/xhtml" poster="data:image/png;base64,<base64 data>" src="https://snippets.cdn.mozilla.net/media/files/e29ada39-11f4-4157-ae1c-1340d9455692.webm"></video>

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes