Palm WebOS emulator fails for installation on Virtualbox 3.1
the webos SDK does not work under the latest version of VirtualBox (3.1).
Developer forums can be found here.
http://developer.Palm.com/distribution/index.php
Tags: HP Tablets
Similar Questions
-
I just got a laptop HP ProBook G3 450 with Windows 7 Pro 64 bit. I'm unable to install the Photosmart C410 series software and it fails when checking the system requirements, saying the USB hardware and necessary drivers are not present. I tried with and without a USB cable installed and also tried to disable the security firewall. It fails for the same when USB problem only connected via WiFi. The discoveries of software troubleshooting HP Print and Scan doctor that the software is not fully installed, for example, without help. I can connect to the printer and print a test page using my WiFi network using a web browser, and I managed to install it on two other portable Win7 in the past.
Hello
Click the Start button and type folder in the search bar, then open the Temp folder indicated.
Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
Open the installation folder.
Find the file usbready.exe and rename it to usbready.old.exe
Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
Now follow the installation and check for the difference.
Kind regards
Shlomi -
Security update for Windows XP downloads but fails during installation that gives 0x8007F0F04 error code
FixIt, reboot, try again not useful
How can I get the security properly installed? or what happens if I don't?
Original title: 0x8007F0F04
Hello
1. what day you're talking about?
2. what Microsoft fixit you talking?
3. don't you make changes to the computer before the show?
Please follow the steps from the link below.
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.Microsoft.com/kb/322756
How to back up and restore the registry in Windows
-
Hey!
I did research on this problem literally all over the web, on the forums, support contact Dell and Microsoft hardware too.
But the question is always free!
-Very well, so I recently downloaded 13 beta Garry Mod, and I wanted to play. I clicked on 'Play' and he said:
"Error!"
You need to update DirectX - google search for "DirectX Runtime" "
So, I put google and downloaded the link he gave me. I ran the program, and that's what happned:
"Initializing...". »
"Installation of components: "
DirectX Runtime Opitonal Componets.
Then suddenly out of nowhere, a window pops up saying:
"A .cab file is needed for installation is not reliable." Please check the cyptographique Services are enabled and the certificate file is valid. »
After clicking 'OK', it goes back to the origional instalation window saying "Installation failed."
I'm extremely lost here, I searched for answers, but none of them seem to apply or work.
I have Windows 7 on an Alienware M14XR2.
Something will help you, thanks!
try creating another account
-
I get an installation failed for photoshop, illustrator and caused - payload: package redistributable Microsoft Visual C++ 2012 (x 64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20}---ERREUR: third payload Installer vcredist_x64.exe failed with exit code: ERROR-2147024546: cannot install the Microsoft Visual C++ 2012 Redistributable Package (x 64). Please try to install by double-clicking the executable file to "C:\Users\randy\AppData\Local\Temp\{2246675D-5215-4CA7-BE30-569ED38C5D9B}\Photoshop_15_LS 20_win64\Adobe CC 2014\payloads\Microsoft VC 2012 Redist (x 64) \vcredist_x64.exe", or download and install the 2012 Microsoft Visual C++ Redistributable Package last (x 64) Microsoft Web site - www.microsoft.com
Go to control panel > programs > program and features.
under programs and features, look for the option "Microsoft Visual C++ Redistributable Package (x 64) 2012" and do a right click on it and uninstall it.
If you are prompted, restart, and then uninstall.
Once you had uninstalled package redistributable Microsoft Visual C++ 2012 (x 64).
Click on the link below and the new download Package redistributable Microsoft Visual C++ 2012 (x 64) (vcredist (x 64) .exe file and install the same):
Once you had installed successfully Vcredist_x64.exe, desktop application Cloud Creative throw and try to install the CC apps.
Let me know if you need more assistance.
-
X 3500 HNAP call to the device failed for an unknown reason.
During the installation process Cisco Connect X 3500 briefly to connect to internet (can surf the net very briefly in this window) but when he arrives at the end of the installation it saying unsuccessful then restarts. Is there a way to manually connect just using the address IP is a browser?
Error code: 82BD0305
Error description: year HNAP call to the device failed for an unknown reason.
Model name: loading...
Model number: X 3500
Serial number: unknown
Firmware version: loading...
Operating system: Windows 7 SP 1
Software version: 1.4.12340.0
Connection type (WAN): loading...
(LAN) IP address: loading...
(WAN) IP address: loading...
The computer IP address: 192.168.1.103
Found! At the bottom of the Cisco Connect program window is a link to configure manually via a web browser.
-
I had a lot of trouble trying to install the 64-bit version of windows 7 Home Premium on my 64-bit vista, and my question is multi-part. If it is relevant, it's my 2nd copy of windows 7 I have tried. Initially, I had the problem of not being able to run the installation on two copies with the error "'autorun.dll' could not be found or is damaged. Error code is [0x7E]. "However, I managed to get into with my 2nd copy installation after restarting my computer. Once in Setup, I got another error that stopped the installation that says "windows not could create an installation folder. Error code is 0 x 80070017. "Again, I rebooted my computer and started the installation again, this time following installation was decently through but stopped when I got the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. "I then backed up and restarted my computer and then tried to use the option to install custom but then got the error"E:\sources\autorun.dll is not designed to run on windows or it contains an error. Try to install the program using the original media, or contact your system administrator. "coupled with the error"the file 'autorun.dll' could not be loaded or is corrupt. Error code is 0xC1"again once I restarted and tried the custom option but got the error" Windows has no load the required file WinSetup.dll.» The file is possibly corrupted. To install windows, restart the installation. Error code is 0x3E6. "I restarted my computer and tried the custom triple option more and still have the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. »
I understand that my problem is very complex, but it seems to be built around a missing or damaged file. Thanks if you can tell what's wrong or what to do.
Tips for solving common problems when Windows 7 won't install troubleshooting
1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor2 disable any security software, including anti-virus programs and firewalls.
3 make sure that your computer has the BIOS and latest drivers.
4. disconnect all external devices except the keyboard and mouse before installing.
5. If your computer/motherboard integrated video use and remove the dedicated video card.
6. If you have a large amount of RAM (memory), try to reduce the amount of RAM installed. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful.
7. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.8. check your RAM (memory) to find errors. This can take some time.
(A) Insert the Windows 7 DVD and restart the computer.
(B) start from the Windows 7 DVD.
(C) select your language, and then click Next.
(D) click on "repair your computer" then select the operating system to fix it.
(E) click on the link of the Memory Diagnostics in the system recovery menu.
(F) the computer will restart and your memory is checked for errors.9 turn off startup programs:
(A). Click Start, type MSCONFIG in the search box and press ENTER.
OK the authorization of user account control and password if necessary
If you are using XP: click Start, run, and type: MSCONFIG and click OK.
(B) on the general tab, click Selective startup.
(C) just below the selective startup, clear the checkbox "Load Startup items".
(D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
(E) click OK, and then restart the computer.
(F) try the upgrade again.(NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)
Questions about installing Windows 7?
FAQ - Frequently Asked Questions from Installation Windows 7 & responses -
Hello
Like so many others, I am fighting to get 8 upgraded windows. I have tried all the methods mentioned upgrade
on the forums without success. I have greated iso dvd, tried to use the USB and the installation of office.
Error: Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. [Error code: 0x8007025D]
The error logs:
Setupact.txt
2012-11-04 01:02:27, MoveOldOSFiles IBS Info [0x0600a6]: got through [C:\Windows\] to [C:\Windows.old\Windows\]
2012-11-04 01:02:27, info [0x06412c] IBSLIB SetCheckpoint: Checkpoint ("WinPEArchiveOldWindowsFoldersDoneCheckpoint") current...
2012-11-04 01:02:27, info [0x06412e] IBSLIB SetCheckpoint: Checkpoint 'WinPEArchiveOldWindowsFoldersDoneCheckpoint' have been correctly set up.
2012-11-04 01:02:27, info [0x06412c] IBSLIB SetCheckpoint: Checkpoint ("WinPEImageApplyReadyCheckpoint") current...
2012-11-04 01:02:28, info [0x06412e] IBSLIB SetCheckpoint: Checkpoint 'WinPEImageApplyReadyCheckpoint' have been correctly set up.
2012-11-04 01:02:28, info [0x06009e] IBS DeployWIMImage:Calling IDepWIMImageResolved::Apply...
2012-11-04 01:02:28, info [0x0606cc] IBS calling WIMApplyImage (flags = 0 x 180)...
2012-11-04 01:08:36, ApplyWIMCallback IBS Info [0x0600ae]: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
2012-11-04 01:08:36, ApplyWIMCallback IBS Info [0x0600ae]: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
2012-11-04 01:08:37, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the file [C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys] RULE is [605]
2012-11-04 01:08:41, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
2012-11-04 01:08:41, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
2012-11-04 01:08:41, IBS error [0x0600af] ApplyWIMCallback: error application C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys. RULE [605] [gle = 0x0000025d]
2012-11-04 01:08:41, error [0x0606cc] IBS WIMApplyImage failed; HR = 0x8007025D [gle = 0x0000025d]
2012-11-04 01:08:42, error [0x0600a1] IBS DeployImage:Image request failed; HR = 0x8007025D [gle = 0x0000025d]
2012-11-04 01:08:42, error [0 x 060082] IBS Callback_ImageTransfer: unable to set the OS image. HR = 0x8007025d [gle = 0x0000025d]
2012-11-04 01:08:42, PublishCriticalError IBSLIB Info: publish error message critical [Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. [Error code: 0x8007025D]
2012-11-04 01:08:42, info [0x0a013d] UI accept Cancel. Leaving the Page's progress.
2012-11-04 01:08:42, info UI entering Page Cancel.Setuperr.txt
2012-11-04 01:08:41, IBS error [0x0600af] ApplyWIMCallback: error application C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys. RULE [605] [gle = 0x0000025d]
2012-11-04 01:08:41, error [0x0606cc] IBS WIMApplyImage failed; HR = 0x8007025D [gle = 0x0000025d]
2012-11-04 01:08:42, error [0x0600a1] IBS DeployImage:Image request failed; HR = 0x8007025D [gle = 0x0000025d]
2012-11-04 01:08:42, error [0 x 060082] IBS Callback_ImageTransfer: unable to set the OS image. HR = 0x8007025d [gle = 0x0000025d]Any help will be greatly appreciated.
Thank you for all the answers. Finally managed to get installed it. Download 4 times. Whenever he stopped at different percentages, so I expected the download is corrupt. Finally in the format of my other readers, installed windows 7 on it and then downloaded windows 8. Finally, it worked. Had to be something with my player.
Thanks again. -
ins-20802 - assistant configuration net oracle failed during installation - centos 7
Hello I'm trying to follow the Manual for installation of the Oracle 12 c. In fact it was already installed on the machine and then uninstalled.
During installiation, I get the error "[ins 20802] oracle net configuration assistant has failed during installation" window. And the proposed detailed log file, where I can see:
INFO: No arguments to pass to stdin
INFO: ... GenericInternalPlugIn: starting read loop.
INFO: Read:
WARNING: Skipping line:
INFO: End of argument passing to stdin
INFO: Read: Parsing command line arguments:
WARNING: Skipping line: Parsing command line arguments:
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Parameter "orahome" = /u01/app/oracle/product/12.1.0/db_1
WARNING: Skipping line: Parameter "orahome" = /u01/app/oracle/product/12.1.0/db_1
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Parameter "orahnam" = OraDB12Home1
WARNING: Skipping line: Parameter "orahnam" = OraDB12Home1
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Parameter "instype" = typical
WARNING: Skipping line: Parameter "instype" = typical
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Parameter "inscomp" = client,oraclenet,javavm,server,ano
WARNING: Skipping line: Parameter "inscomp" = client,oraclenet,javavm,server,ano
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Parameter "insprtcl" = tcp
WARNING: Skipping line: Parameter "insprtcl" = tcp
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Parameter "cfg" = local
WARNING: Skipping line: Parameter "cfg" = local
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Parameter "authadp" = NO_VALUE
WARNING: Skipping line: Parameter "authadp" = NO_VALUE
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Parameter "responsefile" = /u01/app/oracle/product/12.1.0/db_1/network/install/netca_typ.rsp
WARNING: Skipping line: Parameter "responsefile" = /u01/app/oracle/product/12.1.0/db_1/network/install/netca_typ.rsp
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Parameter "silent" = true
WARNING: Skipping line: Parameter "silent" = true
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Parameter "ouiinternal" = true
WARNING: Skipping line: Parameter "ouiinternal" = true
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Done parsing command line arguments.
WARNING: Skipping line: Done parsing command line arguments.
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Oracle Net Services Configuration:
WARNING: Skipping line: Oracle Net Services Configuration:
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Profile configuration complete.
WARNING: Skipping line: Profile configuration complete.
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Oracle Net Listener Startup:
WARNING: Skipping line: Oracle Net Listener Startup:
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Running Listener Control:
WARNING: Skipping line: Running Listener Control:
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: /u01/app/oracle/product/12.1.0/db_1/bin/lsnrctl start LISTENER
WARNING: Skipping line: /u01/app/oracle/product/12.1.0/db_1/bin/lsnrctl start LISTENER
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Listener Control complete.
WARNING: Skipping line: Listener Control complete.
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Listener start failed.
WARNING: Skipping line: Listener start failed.
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Check the trace file for details: /u01/app/oracle/cfgtoollogs/netca/trace_OraDB12Home1-1504033PM3901.log
WARNING: Skipping line: Check the trace file for details: /u01/app/oracle/cfgtoollogs/netca/trace_OraDB12Home1-1504033PM3901.log
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Read: Oracle Net Services configuration failed. The exit code is 1
WARNING: Skipping line: Oracle Net Services configuration failed. The exit code is 1
INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
INFO: Completed Plugin named: Oracle Net Configuration Assistant
Years the corresponding trace_OraDB12Home1-1504033 PM 3901 .log:
[main] [ 2015-04-03 15:39:06.735 MSK ] [HAUtils.getCurrentOracleHome:593] Oracle home from system property: /u01/app/oracle/product/12.1.0/db_1
[main] [ 2015-04-03 15:39:06.735 MSK ] [HAUtils.getConfiguredGridHome:1343] ----- Getting CRS HOME ----
[main] [ 2015-04-03 15:39:06.737 MSK ] [UnixSystem.getCRSHome:2878] olrFileName = /etc/oracle/olr.loc
[main] [ 2015-04-03 15:39:06.795 MSK ] [HAUtils.getHASHome:1500] Failed to get HAS home.
PRCI-1144 : Failed to retrieve Oracle Grid Infrastructure home path
PRKC-1144 : File "/etc/oracle/olr.loc" not found.
[main] [ 2015-04-03 15:39:06.795 MSK ] [InitialSetup.checkHAConfiguration:4808] HA Server is NOT configured.
[main] [ 2015-04-03 15:39:06.797 MSK ] [NetCAResponseFile.<init>:75] Response file initialized: /u01/app/oracle/product/12.1.0/db_1/network/install/netca_typ.rsp
[main] [ 2015-04-03 15:39:06.798 MSK ] [NetCAResponseFile.getInstalledComponents:114] Installed components from response file: server, net8, javavm
[main] [ 2015-04-03 15:39:06.798 MSK ] [NetCAResponseFile.getVirtualHost:171] Virtual Host from response file: null
[main] [ 2015-04-03 15:39:06.799 MSK ] [SilentConfigure.performSilentConfigure:198] Typical profile configuration.
[main] [ 2015-04-03 15:39:06.801 MSK ] [ConfigureProfile.setProfileParam:140] Setting NAMES.DIRECTORY_PATH: (TNSNAMES, EZCONNECT)
[main] [ 2015-04-03 15:39:06.802 MSK ] [SilentConfigure.performSilentConfigure:206] Typical listener configuration.
[main] [ 2015-04-03 15:39:06.839 MSK ] [ConfigureListener.isHASConfigured:1596] Calling SRVM api to check if Oracle Restart is configured ...
[main] [ 2015-04-03 15:39:06.840 MSK ] [HAUtils.getCurrentOracleHome:593] Oracle home from system property: /u01/app/oracle/product/12.1.0/db_1
[main] [ 2015-04-03 15:39:06.840 MSK ] [HAUtils.getConfiguredGridHome:1343] ----- Getting CRS HOME ----
[main] [ 2015-04-03 15:39:06.840 MSK ] [UnixSystem.getCRSHome:2878] olrFileName = /etc/oracle/olr.loc
[main] [ 2015-04-03 15:39:06.841 MSK ] [HAUtils.getHASHome:1500] Failed to get HAS home.
PRCI-1144 : Failed to retrieve Oracle Grid Infrastructure home path
PRKC-1144 : File "/etc/oracle/olr.loc" not found.
[main] [ 2015-04-03 15:39:06.841 MSK ] [ConfigureListener.isHASConfigured:1607] Is Oracle Restart configured: false
[main] [ 2015-04-03 15:39:06.841 MSK ] [ConfigureListener.isHASRunning:1636] Is Oracle Restart running: false
[main] [ 2015-04-03 15:39:06.842 MSK ] [ConfigureListener.listenerExists:396] Is listener "LISTENER" already exists: false
[main] [ 2015-04-03 15:39:06.842 MSK ] [ConfigureListener.typicalConfigure:257] Checking for free port in range: 1521-1540
[main] [ 2015-04-03 15:39:06.842 MSK ] [ConfigureListener.validateEndPoint:1059] Validating end-point: TCP:1521
[main] [ 2015-04-03 15:39:06.944 MSK ] [ConfigureListener.isPortFree:1131] Checking if port 1521 is free on local machine...
[main] [ 2015-04-03 15:39:06.945 MSK ] [ConfigureListener.isPortFree:1146] InetAddress.getByName(127.0.0.1): /127.0.0.1
[main] [ 2015-04-03 15:39:06.945 MSK ] [ConfigureListener.isPortFree:1148] Local host IP address: localhost.localdomain/127.0.0.1
[main] [ 2015-04-03 15:39:06.945 MSK ] [ConfigureListener.isPortFree:1150] Local host name: localhost.localdomain
[main] [ 2015-04-03 15:39:06.945 MSK ] [ConfigureListener.isPortFree:1166] IP Address: localhost.localdomain/127.0.0.1, Is IPv6 Address: false
[main] [ 2015-04-03 15:39:06.946 MSK ] [ConfigureListener.isPortFree:1169] IP Address: localhost.localdomain/127.0.0.1, Is Link-Local Address: false
[main] [ 2015-04-03 15:39:06.946 MSK ] [ConfigureListener.isPortFree:1194] Creating ServerSocket on Port:1521, IP Address: localhost.localdomain/127.0.0.1
[main] [ 2015-04-03 15:39:06.968 MSK ] [ConfigureListener.isPortFree:1197] Created ServerSocket successfully.
[main] [ 2015-04-03 15:39:06.968 MSK ] [ConfigureListener.isPortFree:1166] IP Address: localhost.localdomain/0:0:0:0:0:0:0:1, Is IPv6 Address: true
[main] [ 2015-04-03 15:39:06.968 MSK ] [ConfigureListener.isPortFree:1169] IP Address: localhost.localdomain/0:0:0:0:0:0:0:1, Is Link-Local Address: false
[main] [ 2015-04-03 15:39:06.968 MSK ] [ConfigureListener.isPortFree:1194] Creating ServerSocket on Port:1521, IP Address: localhost.localdomain/0:0:0:0:0:0:0:1
[main] [ 2015-04-03 15:39:06.969 MSK ] [ConfigureListener.isPortFree:1197] Created ServerSocket successfully.
[main] [ 2015-04-03 15:39:06.969 MSK ] [ConfigureListener.isPortFree:1209] Creating ServerSocket on Port:1521, Local IP Address: /127.0.0.1
[main] [ 2015-04-03 15:39:06.969 MSK ] [ConfigureListener.isPortFree:1213] Created ServerSocket successfully.
[main] [ 2015-04-03 15:39:06.969 MSK ] [ConfigureListener.isPortFree:1219] Creating ServerSocket on Port:1521
[main] [ 2015-04-03 15:39:06.970 MSK ] [ConfigureListener.isPortFree:1222] Created ServerSocket successfully.
[main] [ 2015-04-03 15:39:06.970 MSK ] [ConfigureListener.isPortFree:1242] Returning is Port 1521 free: true
[main] [ 2015-04-03 15:39:06.970 MSK ] [ConfigureListener.validateEndPoint:1114] Validation...Complete for TCP/TCPS.
[main] [ 2015-04-03 15:39:06.970 MSK ] [ConfigureListener.typicalConfigure:274] Using port: 1521
[main] [ 2015-04-03 15:39:08.684 MSK ] [ConfigureListener.isPortFree:1131] Checking if port 1521 is free on local machine...
[main] [ 2015-04-03 15:39:08.685 MSK ] [ConfigureListener.isPortFree:1146] InetAddress.getByName(127.0.0.1): /127.0.0.1
[main] [ 2015-04-03 15:39:08.686 MSK ] [ConfigureListener.isPortFree:1148] Local host IP address: localhost.localdomain/127.0.0.1
[main] [ 2015-04-03 15:39:08.686 MSK ] [ConfigureListener.isPortFree:1150] Local host name: localhost.localdomain
[main] [ 2015-04-03 15:39:08.687 MSK ] [ConfigureListener.isPortFree:1166] IP Address: localhost.localdomain/127.0.0.1, Is IPv6 Address: false
[main] [ 2015-04-03 15:39:08.687 MSK ] [ConfigureListener.isPortFree:1169] IP Address: localhost.localdomain/127.0.0.1, Is Link-Local Address: false
[main] [ 2015-04-03 15:39:08.687 MSK ] [ConfigureListener.isPortFree:1194] Creating ServerSocket on Port:1521, IP Address: localhost.localdomain/127.0.0.1
[main] [ 2015-04-03 15:39:08.688 MSK ] [ConfigureListener.isPortFree:1197] Created ServerSocket successfully.
[main] [ 2015-04-03 15:39:08.688 MSK ] [ConfigureListener.isPortFree:1166] IP Address: localhost.localdomain/0:0:0:0:0:0:0:1, Is IPv6 Address: true
[main] [ 2015-04-03 15:39:08.689 MSK ] [ConfigureListener.isPortFree:1169] IP Address: localhost.localdomain/0:0:0:0:0:0:0:1, Is Link-Local Address: false
[main] [ 2015-04-03 15:39:08.689 MSK ] [ConfigureListener.isPortFree:1194] Creating ServerSocket on Port:1521, IP Address: localhost.localdomain/0:0:0:0:0:0:0:1
[main] [ 2015-04-03 15:39:08.689 MSK ] [ConfigureListener.isPortFree:1197] Created ServerSocket successfully.
[main] [ 2015-04-03 15:39:08.690 MSK ] [ConfigureListener.isPortFree:1209] Creating ServerSocket on Port:1521, Local IP Address: /127.0.0.1
[main] [ 2015-04-03 15:39:08.690 MSK ] [ConfigureListener.isPortFree:1213] Created ServerSocket successfully.
[main] [ 2015-04-03 15:39:08.691 MSK ] [ConfigureListener.isPortFree:1219] Creating ServerSocket on Port:1521
[main] [ 2015-04-03 15:39:08.691 MSK ] [ConfigureListener.isPortFree:1222] Created ServerSocket successfully.
Problem is perhaps because:
PRCI-1144 : Failed to retrieve Oracle Grid Infrastructure home path
PRKC-1144 : File "/etc/oracle/olr.loc" not found.
All the ideas I'm watercraft evil and how to finally install the Oracle?
I found the reason for this exception. If someone will face the same problem just create/etc/oracle folder and give it permissions 777. For me, it helped.
-
I have a copy of the Master CS6 Collection, which I can't install on my iMac OSX 10.10.5 running.
I've tried so far of troubleshooting:
- has run the Adobe cleaning tool.
- created an admin account news, temporary and tried to install it with this.
- active root user and I tried installing that way.
- tried to install via the terminal with sudo.
- Cloud of Safari killed as well as Safari Plugin Updater (delayed failure of about 60 seconds).
- permissions of the disk verified and repaired via disk utility and the terminal.
- direct downloaded the trial and saved a trial version of the software.
In each case, Installer has given the message "installation failed." classic once Setup passes to "Validating scripts package," after < s 20 to package scripts to run.
Some info relevant newspaper (I have also some other info Journal, but there is too much of him posting here):
install.log
Feb 4 00:06:31 FATM.attlocal.net installed [3141]: PackageKit:-----Begin installation -
Feb 4 00:06:31 FATM.attlocal.net installed [3141]: PackageKit: application = < 1 packages, destination = PKInstallRequest / >
Feb 4 00:06:31 FATM.attlocal.net installed [3141]: PackageKit: packages =)
"PKJaguarPackage < file://localhost/CS6_MC/CS6%20MC%20SUM14/Build/CS6%20MC%20SUM14_Install.pkg >.
)
Feb 4 00:06:31 FATM.attlocal.net installed [3141]: PackageKit: extraction file://localhost/CS6_MC/CS6%20MC%20SUM14/Build/CS6%20MC%20SUM14_Install.pkg (destination = / var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxManager/485 372E8-CAA8 - 4A 97 - AB26 - 9F0A034D3BFC.activeSandbox / Root, uid = 0)
Feb 4 00:06:31 FATM.attlocal.net installed [3141]: PackageKit: prevent user idle system sleep
Feb 4 00:06:31 FATM.attlocal.net installed [3141]: PackageKit: suspension backupd
Feb 4 00:06:31 FATM.attlocal.net install_monitor [11426]: temporarily to exclusion: / applications/Library / System, / bin, partnership, / sbin, / usr
Feb 4 00:06:31 FATM.attlocal.net installed [3141]: PackageKit: executing script ".» "/ preinstall" in CS6_MC/CS6 MC SUM14/Build/CS6 MC SUM14_Install.pkg/Contents/Resources
Feb 4 00:06:31 FATM.attlocal.net installed [3141]:. / Preinstall: AAMEE Installer: preinstall launched...
Feb 4 00:06:31 FATM.attlocal.net installed [3141]:. / Preinstall: AAMEE Installer: working directory is CS6_MC/CS6 MC SUM14/Build/CS6 MC SUM14_Install.pkg/Contents/Resources
Feb 4 00:06:31 FATM.attlocal.net installed [3141]:. / Preinstall: AAMEE Installer: launch of AdobeDeploymentManager...
Feb 4 06:00:33 FATM.attlocal.net installer [11406]: LSExceptions [0x6080000a6840] unloaded
Feb 4 00:06:58 FATM.attlocal.net installed [3141]:. / Preinstall: AAMEE Installer: exit code of AdobeDeploymentManager is (79)
Feb 4 00:06:58 FATM.attlocal.net installed [3141]:. / Preinstall: AAMEE Installer: exit...
Feb 4 00:06:58 FATM.attlocal.net install_monitor [11426]: re-included: / applications/Library / System, / bin, partnership, / sbin, / usr
Feb 4 00:06:59 FATM.attlocal.net installed [3141]: PackageKit: release backupd
Feb 4 00:06:59 FATM.attlocal.net installed [3141]: PackageKit: allow user idle system sleep
Feb 4 00:06:59 FATM.attlocal.net installed [3141]: PackageKit: install failed: error Domain = PKInstallErrorDomain Code = 112 "an error has occurred during execution of scripts in the package 'CS6 MC SUM14_Install.pkg'." UserInfo = 0x7fb4114b8080 {NSFilePath =. / preinstall, URL = file://localhost/CS6_MC/CS6%20MC%20SUM14/Build/CS6%20MC%20SUM14_Install.pkg, PKInstallPackageIdentifier = com.adobe.Enterprise.install.1D5F5912 - 3047-4CCF-870E-BB293A024 4E0, NSLocalizedDescription = an error occurred when executing scripts package 'CS6 MC SUM14_Install.pkg'.} {
NSFilePath = '. '. "/ preinstall."
NSLocalizedDescription = "an error occurred during execution of the package \U201cCS6 MC SUM14_Install.pkg\U201d scripts.";
URL = "file://localhost/CS6_MC/CS6%20MC%20SUM14/Build/CS6%20MC%20SUM14_Install.pkg";
PKInstallPackageIdentifier = "com.adobe.Enterprise.install.1D5F5912-3047-4CCF-870E-BB293A0244E0";
}
Feb 4 00:06:59 FATM.attlocal.net installed [3141]: PackageKit: runs the inactive tasks
Feb 4 00:06:59 FATM.attlocal.net [11406] Installer: install: didFailWithError:Error area = PKInstallErrorDomain Code = 112 "an error has occurred during execution of scripts in the package 'CS6 MC SUM14_Install.pkg'." UserInfo = 0x6100000f5400 {NSFilePath =. / preinstall, URL = file://localhost/CS6_MC/CS6%20MC%20SUM14/Build/CS6%20MC%20SUM14_Install.pkg, PKInstallPackageIdentifier = com.adobe.Enterprise.install.1D5F5912 - 3047-4CCF-870E-BB293A024 4E0, NSLocalizedDescription = an error occurred when executing scripts package 'CS6 MC SUM14_Install.pkg'.}
Feb 4 00:06:59 FATM.attlocal.net installed [3141]: PackageKit: customer withdrawal PKInstallDaemonClient pid = 11406, uid = 501 (/ System/Library/CoreServices/Installer.app/Contents/MacOS/Installer)
Feb 4 00:06:59 FATM.attlocal.net installed [3141]: PackageKit: done with sandbox removals
Feb 4 00:06:59 FATM.attlocal.net installed [3141]: PackageKit: Sandbox/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxManager/317D7ADC-41F9-48 93-98DA - 3B00719BC061.sandbox: relevance 830
Feb 4 00:06:59 FATM.attlocal.net installed [3141]: PackageKit: Sandbox/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxManager/E00B43D5-02E2-46 2 b-9BA4 - EFD49D3EDE2E.sandbox: relevance 240
Feb 4 00:06:59 FATM.attlocal.net [11406] Installer: installation failed: the installer has encountered an error that caused the installation to fail. Contact the manufacturer of the software.
Feb 4 00:06:59 FATM.attlocal.net installer [11406]: State of 3AD0 of IFDInstallController = 8
Feb 4 00:06:59 FATM.attlocal.net installer [11406]: display 'Installation failed' UI.
Feb 4 00:06:59 FATM.attlocal.net installer [11406]: message "Installation Failed" display user interface: "Setup has encountered an error that caused the installation to fail. Contact the manufacturer of software for assistance. ».
Error.log.gz the Adobe installer
04/02/16 00:06:56:159 | [INFO] | | OOBE. OF | | | | 1118690 | DEVersion: 6.0.0.0
04/02/16 00:06:56:160 | [INFO] | | OOBE. OF | | | | 1118690 | Loading of Manager/DECore/DE6/Setup.dylib Application/Applications/Utilities/Adobe library
04/02/16 00:06:56:164 | [INFO] | | OOBE. OF | | | | 1118690 | : TIMER: [Total timer]
04/02/16 00:06:56:164 | [INFO] | | OOBE. OF | | | | 1118690 | CHECK: Single Instance
04/02/16 00:06:56:164 | [INFO] | | OOBE. OF | | | | 1118690 | CHECK: credentials
04/02/16 00:06:56:164 | [INFO] | | OOBE. OF | | | | 1118690 | Load deployment file
04/02/16 00:06:56:164 | [INFO] | | OOBE. OF | | | | 1118690 | Create required folders
04/02/16 00:06:56:164 | [INFO] | | OOBE. OF | | | | 1118690 | Assuming that uninstall mode
04/02/16 00:06:56:164 | [INFO] | | OOBE. OF | | | | 1118690 | Search for master payload
04/02/16 00:06:56:165 | [ERROR] | | OOBE. OF | | | | 1118690 | DW040: The product '{41C543D4-AC29-4B7E-B95D-D73B7EB2EFBB}' is not installed. Is unable to uninstall
04/02/16 00:06:56:165 | [INFO] | | OOBE. OF | | | | 1118690 | # Running Workflow EDT #.
04/02/16 00:06:56:165 | [INFO] | | OOBE. OF | | | | 1118690 | : TIMER END: [Total Timer] took 1 milliseconds (0.001 seconds)
04/02/16 00:06:57:233 | [INFO] | | OOBE. OF | | | | 1118690 | Uninstalling AAM
04/02/16 00:06:57:236 | [INFO] | | OOBE. OF | | | | 1118690 | AAM uninstall Status: 1 and 0
04/02/16 00:06:57:237 | [INFO] | | OOBE. OF | | | | 1118690 | -------------------------------------- Summary --------------------------------------
04/02/16 00:06:57:237 | [INFO] | | OOBE. OF | | | | 1118690 | -0 fatal Error (s), 1 Error (s)
04/02/16 00:06:57:237 | [INFO] | | OOBE. OF | | | | 1118690 | The OSX version: 10.10.5
04/02/16 00:06:57:237 | [INFO] | | OOBE. OF | | | | 1118690 |
04/02/16 00:06:57:237 | [INFO] | | OOBE. OF | | | | 1118690 | ERROR: DW040: the product '{41C543D4-AC29-4B7E-B95D-D73B7EB2EFBB}' is not installed. Is unable to uninstall
04/02/16 00:06:57:237 | [INFO] | | OOBE. OF | | | | 1118690 |
04/02/16 00:06:57:237 | [INFO] | | OOBE. OF | | | | 1118690 | Please find the error string above to find when the error occurred.
04/02/16 00:06:57:237 | [INFO] | | OOBE. OF | | | | 1118690 | These errors resulted in installer exit code mentioned below.
04/02/16 00:06:57:237 | [INFO] | | OOBE. OF | | | | 1118690 | -------------------------------------------------------------------------------------
04/02/16 00:06:57:237 | [INFO] | | OOBE. OF | | | | 1118690 |
04/02/16 00:06:57:237 | [INFO] | | OOBE. OF | | | | 1118690 | 33 of the Exit Code:-the product is not installed, it is impossible to uninstall.
04/02/16 00:06:57:237 | [INFO] | | OOBE. OF | | | | 1118690 | Please see specific errors for troubleshooting. For example, ERROR: DW040...
For those who have similar problems who stumbles on this post, here is the solution that worked for me:
- Granting of reading & writing to all parent folders and children access to me, users admin and all the world
- Enabling the root user
- Creation of a new administrative user & Installationavecuneracine who
- Kill all the nuclei of cloud of Safari
- Boot the machine in safe mode
- Remove all previous applications of CC, etc. (don't even bother with the vacuum, just delete everything yourself in different subfolders library and root)
-
Someone at - it problems experienced installation PS 14 items on their Mac? I managed to download the program after the purchase, but he continues to fail during installation.
Frustrating. I spent hours with 4-5 customer representatives Adobe tries to 'fix' my problem. Finally, I just ask for a refund. I was told 5 to 7 days until the refund appears on my cc. I was considering buying the disc, but with your comment, I think I'll look for something else.
-
Acrobat XI 11.0.06 update fails during installation
Acrobat XI 11.0.06 update fails during installation. Advice or assistance? Here are the contents of the Setup log:
Jan 17 00:32:34 fox.local installed [5955]: PackageKit:-----Begin installation -
Jan 17 00:33:44 fox.local installed [5955]: PackageKit: install failed: error Domain = PKInstallErrorDomain Code = 112 "an error has occurred during execution of the package"AcrobatUpd11006.pkg"scripts." UserInfo = 0x7fb9615c5160 {NSFilePath =. / postinstall, URL = file://localhost/Volumes/AcrobatUpd11006/AcrobatUpd11006.pkg#payload.pkg, PKInstallPackageIdentifier = com.adobe.acrobat.a11.AcrobatUpd11006, NSLocalizedDescription = an error occurred during execution of scripts from the package "AcrobatUpd11006.pkg".} {
NSFilePath = '. '. "/ postinstall;
NSLocalizedDescription = "an error occurred during execution of the package \U201cAcrobatUpd11006.pkg\U201d scripts.";
URL = "file://localhost/Volumes/AcrobatUpd11006/AcrobatUpd11006.pkg#payload.pkg";
PKInstallPackageIdentifier = "com.adobe.acrobat.a11.AcrobatUpd11006";
}
Jan 17 00:33:44 fox.local [11306] Installer: installation failed: the installer has encountered an error that caused the installation to fail. Contact the manufacturer of the software.
Jan 17 00:33:44 fox.local installer [11306]: display UI "Installation Failed".
Jan 17 00:33:44 fox.local installer [11306]: message "Installation Failed" display user interface: "Setup has encountered an error that caused the installation to fail. Contact the manufacturer of software for assistance. ».
The upgrade is not the 11.0.06, but it's an update. The upgrade is that you can buy if you had an earlier version of Acrobat (at least 9 AA). The upgrade is significantly lower than the price of the full product. With the upgrade you must also have the SN of the previous product available for installation. That's why I asked for the upgrade. Once you install AA XI, then go to 11.0.06 is a free update (updates are changes in the minor version and do quarterly or when there is a critical security problem).
You can often resolve installations by running a repair. In the windows which is done either from help > repair or the control panel. I don't know the equivalent of the control panel in the Mac.
In any case I am happy that you fixed it.
-
The user equivalence test failed for user 'oracle '.
Hello
I try to install the Clusterware Oracle 10g as part of my RAC installation.
I have configured in RHEL 4 to 2 nodes (rac and rac2). But when I run the runcluvfy utility, I get the error below:
[oracle@rac cluvfy] $./runcluvfy.sh stage pre - crsinst - rac n, rac2
Conducting due diligence to install cluster services
Audit accessibility of node...
Check for accessibility of node is passed node "rac".
Verify the equivalence of the user...
The user equivalence test failed for user 'oracle '.
The test failed on the nodes:
RAC
CAUTION:
Equivalence of the user is not defined for nodes:
RAC
Audit will proceed to nodes:
Rac2
The problem is that with the first node (rac). The second node passes.
SSH works fine. Don't know what the problem is!
Thank you!Have you set up SSH for the equivalence of the user?
Or
Did you establish the user equivalence?
If Yes... Please check...
$ ssh hostname rac
RAC
$ ssh hostname rac2
Rac2
You should establish the equivalence before user...
exec/usr/bin/ssh-agent $SHELL
/ usr/bin/SSH-AddIf you do not configure ssh for the equivalence of the user
http://www.Oracle.com/technology/pub/articles/smiley_rac10g_install.html
Or
read the SSH user equivalence is not defined on the remote nodes -
Download iOS 10 update once for installation on multiple devices via iTunes?
I think remember me that it was possible and it was the best way. When I Googled it I am surprised to find there is no recent information on this (last year, although there are responses from 2012). I think this means 'no', but have not found the answer either.
Then, download iOS updated once for installation on multiple devices via iTunes? As many people have multiple iOS devices that's probably a good idea.
Almost certainly not.
Each version of the product Apple has its own download.
-
DO I NEED REAL DISC FOR INSTALLATION OF WINDOWS?
I DOWNLOAD THE ISO OF WINDOWS 8 FROM A SITE
THEN I HAVE IT ENGRAVED ON A VIRGIN DVD BUT WHEN I INSERT IT TO MY MAC MY MAC DOESN'T RECOGNIZE NOT AND KEPT IN EJECT!WHAT SHOULD I DO
DO I NEED A DISC AUTHENTIC FOR INSTALLATION OF WINDOWS VIA BOOTCAMP?
If make sure you have it burned as an image rather than as a file
If you enter the optic papilla in the finder and there is a file called... windows8.iso is false
an iso file is a copy of a disc optical https://en.wikipedia.org/wiki/ISO_image
and must be burned as an image, making it the target of the combustion contain a copy 100% of what
was the optical disk used to make the iso file in the first place
Maybe you are looking for
-
Error 50 while emptying the trash
I can't empty the trash error 50. It seems that the number of documents and folders contains a character "null" at the end of their names.
-
Context menu of tabs on the empty tab bar.
When click with the right button on a zone empty of the tab bar, I get a pop-up menu to select the toolbars that I want to show off or customize the layout of Firefox. As I recall (and my muscle memory seems to agree) that used to bring up the contex
-
My new 6 Iphone got some scratches
Hello I've had my 6 s IPhone for aprox 3 weeks now, I'm very careful with the phone, bought a fullcover case et.x. There are still a few scratches on the screen! It makes me crazy! I truly believe that my screen is maybe slightly more sweet as a defe
-
Satellite A45-S121 unable to connect to "pull the IP Address of my wireless network.
I try to get a Satellite A45-S121 connected to my or any public wireless network. I used several different wireless Pcmcia cards, but cannot access the Internet. All of the cards work in other portable and can connect to public wifi, but once again n
-
TestStand Simple OI does not close properly
Hello. We need to build a test system that runs TestStand 4.2 and code modules are created with LabVIEW 9.0. The SW is running on a PC with Windows XP. We currently use TestStand Simple (LabVIEW version) User Interface to run the tests, and with the