Pan and zoom does not

Similar Questions

• Pinch and Zoom does not not Android V26

  Hello

  I am currently a folio of construction and hoping to take advantage of the new support of pdf to V26 (for Android tablets). I updated the tools, folio Builder and content viewer Adobe to V26. I downloaded successfully three articles with pdf format selected. The first article works fine (I can pinch and zoom in). The second and third items however do not pinch and zoom. I double checked my settings and even reloaded these two articles, and they do not always work. I'm doing something wrong?

  Unfortunately, pinch zoom on Android & PDF does not work at the moment, when the article is set to Swipe Horizontal only. In addition, pinch zoom & PDF does not work for items in scroll smoothly on Android or iOS.

• Scrolling, pinch and zoom does not work in touchpad DM4-2015dx

  I did a clean install of Windows 7 Ultimate 64 - bit edition on my new laptop HP Pavilion DM4-2015dx from Best Buy. I was able to find the drivers for all devices except the touchpad. Currently, the touchpad functionality is limited to basic operations. I can't scroll, pinch zoom, etc. I tried the latest drivers of Synaptics Touchpad HP and Synaptics site without a bit of luck. The touchpad is simply recognized as generic "Standard Pointing Device."

  When I go into deivce prperties for the touchpad I see only the options for assignment of the buttons. There is no option to activate the rollers vertical or horizontal, pinch zoom, etc. Help, please!

  OK, so I found what the problem was. Initially, I assumed that the touchpad is a Synaptics touchpad. It is NOT the case. The touchpad is "Alps pointing device". The drivers installed with HP Pavilion DM4-2015dx out of the box are dated 18/02/2011 version 7.206.1717.117 as Alps pointing device. These particular drivers were not found on the HP website. However, there are similar drivers of 2010 that work very well. Here is a link:

  Alps Pointing - device Driver (2 channels)

  Without the right drivers you will also find expreince the cursor jump effect where the cursor will jump at random on the screen locations as you type. It has nothing to do with the user touching the touchpad. It's just that the generic touchpad Windows drivers are NOT compatible with the Alps touchpad.

  A final word for HP. PLEASE post all drivers for HP Pavilion DM4-2015dx on your Internet site, as well as ALL the HP utility.

• Google Maps: pan and zoom controls are not displayed. 'PIN' markers can appear only once, and then disappear.

  Loading Google Maps, either directly, or where they are incorporated into other sites, orders pan and zoom are not displayed. Location markers 'PIN' can appear only once, but disappear after doing anything with the card. I'm on the last Windows XP and latest Firefox. This problem is long-standing and has remained the same during several different versions of Firefox and Windows updates. I tried "CTRL-0' no effect."

  Problem solved by 'Reset Firefox'. Before that, tried "Safe Mode", no difference. Not aware of the limits on the cookies or the memory usage. Controls on the left (Pan, zoom) for Google Maps were good here and in usual and sizing correct positions and could be found with the cursor and activate it, but 'ghosts' that were not display. Same problem if the content was maps or satellite pix. Reset solved the problem.

• CP7 Pan and Zoom not available button

  One of my colleagues made a video demo and for some reason that we can not pan and Zoom button to animate.  I tried to check the yellow bars and even moving them inside the recorded area and the button are animate.

  He worked for him earlier but it isn't now.

  There are mice would be visible points on the timeline that interfere with the Pan and Zoom?  We tried to selecting an area where they are not points of the mouse, but it has not yet activated.

  Thank you

  Susan

  No, which is also logical: the resolution of the video must stay the same, the width/height ratio must remain.

  You can mark thread as answered?

• Pan and Zoom for beginners

  I'm reading stories to my students and working on the words at the same time. I read on pan and zoom in C8 here is there a pan and zoom or a smart update option in Captivate 8?

  But unfortunately, he is ahead of my curve. I know that I have to open a project in the demonstration video. But just there, I stopped, because I don't know what are the choices to make.

  

  Does anyone know of a BEGINNER video for pan and zoom, rather than videos that assume you already know how to do this and just focus on the changes between versions of Captivate? I have some info of Beyind the essential Captivate of Kevin Siegal 7.

  But it does not help me understand about that. Let's say I want to zoom to the word was. Then say stuff about it. Then go back to history. What are the right steps to take?

  If there is a method step by step online, I would be delighted if you told me where it is. Thank you!

  

  Hmmm, my answer in the other thread was provided with 8 Captivate HD video demo application.  It was a response, not a tutorial, I assume nothing, just talked about this alternative. The screenshot that you have is for a normal software simulation, using slides. I've never used panning during a software simulation of recording at all. My first question would be: do you need interactivity in this "movie"? If this isn't the case, you can try the demo video (is available in the Welcome screen, third icon in the first row). There is not many tutorials autour, it seems that very few people use it. I have published two films created with the demo video, you could have a peek at one to check if this is what you want to do:

  Action vs standard single

  You will see some pan and zoom in this film. Advantage over the Pan in a simulation software in the course of the capture, is that in demo the pan and zoom can be applied later during editing in the dedicated video editor. And the quality is much better, since it is HD and non-destructive.

  If you want to stay with the simulation of software (maybe because you need interactivity), I would never pan when entering, but in different regions, and for Zoom capture have sufficient quality, create separate images and apply effects to it. A combination of slides in demo with normal slides is another possibility.

  Now you will tell me that I'm not offering you links tutorial, as I said there are very few around and most of them is very limited (take a look on Youtube, some are ridiculously simple). After all, Camtasia offers more HD video demo in Captivate you and may be easier to use (not Adobe, purchase separately).

• Pan and Zoom of the problems of the development of tools

  I'm sure I have a newbie question which has been discussed previously, I apologze.  I spent several minutes using the search engine of the forum without any direct results.  The closest I could find was a thread issues dealing with concentrate when Pan and Zoom is applied to a series of images.  I'm trying to get a clear/crisp result starting from a single photograph.

  The source image is a very well targeted, black and white wedding photo.  The tool does a great job of face recognition and a very decent job of auto-composer a route of pan.  I see/understand the controls that would allow me to change these behaviors.  What I find not are:

  A. all control over the development at the enlarged stage;

  B. a way to export the result as a video or a slide show.

  I admit that this is my first use of Adobe Premier elements.  I used other video editing tools and not want to enrage the posters who are exasperated by the "Burns effect ', it was precisely advertising of this feature with version 10 led me to buy this software."  So, I hope that I can be taught how cooerce Center each of face images.

  Thank you.

  Have you returned to the view of the timeline and press Enter to make your pan and zoom?

  The view you see in the workspace Pan & Zoom is a preview only.

• Pan and Zoom effect, what version of PE it introduced?

  I love my PE 3.0 but it does not seem to offer the Pan and Zoom effect. Or am I just not see it.  Does anyone know what later introduced? I know 8.0 has it, but when it come?  The embedded Photoshop 5.0 version, it came with a a pan slide show, just found out.

  Also, I am familiar with keyframes, that would be helpful with pan 3.0? or I need a newer version.  Any good tutorials for this?

  Thank you

  Pan & Zoom is available in all versions that offer keyframes on the fixed effects > Motion > scale (Zoom) and the movement > Position (Pan). Which may have been introduced would be Presets to make those who have 'a button '. Don't know when those who saw the light of day. I do not use them in the pre 4 and would not forward 8 or 9, as I want to control, and also the ability to determine what MY subject is in a picture. No amount of AI can do for me, so a "Preset" is central to about a zero chance to do exactly what I want.

  At some point, PSE said the automatic random Pan & Zoom. Were once again, I have made a slide show in it, I would not apply, as I would Motion Keyframe > Position and movement > pre scale.

  In the pre 3, I firmly believe that you have the effects Panel (access via effects change for a Clip/still), and the ability to keyframe the two movement > scale and Motion > Position. This allows to adjust the settings for these effects over time, i.e. to create a Zoom and create a pan. Other than the fact that make you these by hand, by eye and by mind, but with the ultimate control, you have the features - all simply not automatically applied via a single button.

  Good luck

  Hunt

• Pan and zoom too hard?

  Im a new user v8 PRE element and have for years used MS moviemaker.
  I love all the features and its clearly a better tool, but I'm having some trouble with the basics of pan and zoom
  A film of the construction holidays and have pictures of high resolution of 4000 x 3000, I want just slowlly pan everywhere without blur.  I also just want to zoom in on images up to a certain point.  In moviemaker I had effects that have marked the screen in section 9 and you could zoom at the top left to the bottom right, that left-right (D - F) for example, it was really easy.
  Pre I found "presets" for horizontal pan, but its specific image size and if you take something more than 640... the picture gets black bars of whichever way it does a panoramic with and I want to stay within the image and have not all bars, the pictures are high resolution so I must just be missing something.
  (1) how you right up pan left on photos high resolution, or Chronicles.  Can you PAN and from specific points?
  (2) zoom, I want to slowly zoom in or out of a particular item
  ?
  Very appreciated
  Thanks Maarten

  The first thing I would do is to resize these files to what need you. The pxl 4000. dimension is the very max can handle pre. These powerfully taxes your system.

  According to the parameter preset for your project, you can only see a fixed number of pixels, at the same time, 720 x 480 for a SD/DV project. If your images are used in a project of SD/DV, you could pan for hours on these large images. When you pan on images that are zooming back, usually, I'll be able to do everything that I want with images of 1000 x 750 - allowed a lot of panning. For HD projects, the size will increase, but 4000 pxls. is a monster.

  This ARTICLE we give advice on automation maximum required resizing (dictated by the amount of pan and the specifications of the project.).

  Now, for automated pans & zooms, the slideshow creator in PhotoshopElements was similar. I don't know the details, or the controls, but think we can customize, or simply use the "Random Pan & Zoom".

  PrE has Presets, BUT it has a feature, Keyframing, which allows the user to do absolutely anything they can imagine, about the pans and zooms. The first thing to do is to turn off 'Ladder to the chassis', and then to open the effects Panel. If you click on an image, you will see the fixed effects (and everything you've added), when you choose to change the effects. Go to the fixed effect > Motion and open it. You will see the Position and scale. Think about location as your Pan and scale as your Zoom. Using keyframes, you can adjust both of them over time. You can pause or the other, by adding keyframes with the same settings and can speed things up by having keyframes closer together. For pans and zooms, I convert the linear keyframes to continuous Bezier or use Ease Out/easy-snap. With key frames, you have ultimate and infinite control

  Good luck

  Hunt

• Since I have downloaded 8.0.1 pinch zoom does not work anymore. How to solve this?

  Since I have downloaded 8.0.1 pinch zoom does not work anymore. How to solve this?

  You can restore the zoom feature by changing the related values of downtown on the topic: config page.

  • Browser.Gesture.Pinch.in -> cmd_fullZoomReduce
  • Browser.Gesture.Pinch.in.Shift-> cmd_fullZoomReset
  • Browser.Gesture.Pinch.out-> cmd_fullZoomEnlarge
  • Browser.Gesture.Pinch.out.Shift-> cmd_fullZoomReset
  • Browser.Gesture.Pinch.Latched-> false

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed also show "BOLD" (user set).
  • Preferences can be reset to the default value using the context menu if they are set of users
  • Preferences can be changed via the context menu: Edit (string or integer) or toggle (Boolean)

• Google maps do not appear right, the game is good, but about half of it is said ' we're sorry, but we have no maps at this zoom level for this region. " Zoom does not help.

  When you display a Google map, I get about four vertical bands which alternately display well and gray stripes. The gray area shows the message "we're sorry, but we have no maps at this zoom level for this region." Zoom does not get rid of the grey areas.

  I had this problem for over a year and work around it using MS Internet Explorer or Google Chrome which works Ok. Otherwise, Firefox works great and I use it for everything except Google Maps.

  I tried an uninstall of FireFox and then reinstall, but it did not help. I don't remember what I was doing when this problem is first presented.

  Looks like you have blocked images from http://mt1.google.com/

  See the problems that cause to not show images

  It is possible that you clicked on 'Block Images' from the context menu in an attempt to save an image.
  See web content, pop-ups, fonts and language settings

  • A way to see what images are blocked is to click on the favicon (Site ID icon) on the left side of the address bar.
  • Click on the "More information" button opens the Security tab of the "Page Info" window (also accessible via "tools > Page Info").
  • The Media of the "Page Info" window tab.
  • Select the first image and scroll though the list with the arrow pointing downwards.
  • If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

• Error: One of the USB devices attached to this system has malfunctioned, and windows does not recognize it.

  tried already everything written here. When I plug my USB device (3 of them) my Windows a sad of the USB devices attached to this system has malfunctioned, and windows does not recognize it. I tried plugging it into another winXP machine, it won't work. Can you help me?

  Original title: usb malfunction

  His salvation,

  Thanks for posting your query in Microsoft Community Forum.

  1. What are the troubleshooting steps you have tried so far?
  2. If it works much earlier? If so, did you do changes on the computer before this problem?
  3. What type of USB device you are using?

  As you mentioned that the USB device does not work when plugged into a WinXP machine, it may be a problem with the device itself. In addition, the question may also arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows.

  Therefore, I suggest you try the following methods (skip the ones that you already tried) and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  If the device fails after updating the driver, you can try to roll back the driver with its previous version.

  Restore a driver with its previous version

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Cannot find "Pan and Zoom" option in LR CC 2015

  I am creating a slideshow of 'automatic' with random pan & zoom (as in the good old days again).  I watched this tutorial: slideshow with music and pan and zoom. Adobe Photoshop Lightroom CC tutorials but do not see the option "pan and zoom" OR manual v. automatic options in the Reading Panel on the right side of the screen.   I can choose manual, so it turns out that auto is the default.  This is different from the Adobe tutorial that I quoted above.  My CC with Lightroom is common to updates.

  Can someone give me an idea how I can create a slideshow with random pan and zoom in LR creative cloud?  Thank you, in advance.  ~ Stuart

  This must be my problem.  I have creative cloud and assumed I was in the CC version - I see now that I was in Photoshop Lightroom 5.7.1.   Thank you for your patience and entries, guys!

• How must better panning and zoom like a real camera

  I took a bunch of 4K videos I want to pan and zoom.  When I use the key to pan and zoom image it always comes out a sort of jerky and evil.  Anyway to make it smooth as actually moving a camera?

  are there other tools that help with that?

  Here is what I get, not so good...

  Tammy during his lesson of surfing in Santa Cruz - YouTube

  One way to smooth out the pan and zoom is to have keyframes begins and ends before and after the element appears on the timeline.  This way, the clip is already in motion when it appears and it's always moving when is disappears.

  If there is a transition, be sure that the keyframes are before and after the handles.  If a few cuts, as some images before and after are OK.

• Adjust the size of the frame of the focus when you use Pan and zoom tool in first 14?

  I'm learning to use the pan & zoom tool through Adobe's Classroom in a Book for first elements 11.  The book is excellent, but as his writings for a generation of software of creation that is 3 years old, I'm trying to tackle a smaller image section that lets you control the default structure more small bowl size. (using the angle of the image update)

  Is it possible to adjust the image to a size smaller than the smallest default size allowed?  Thanks for your help!

  provlima

  I am not 14 as being different from 11 regarding the resizing of the workspace Pan and Zoom focus frame (by clicking on - or +). And I have not found a way to adapt a framework of development less than its smaller default size allowed using the-. or otherwise.

  RTA