Panel tabs spontaneously widget resizing

Similar Questions

• Widget Panel tabs is too wide for the layout of the phone.

  Is it possible to reduce the width of the Widget Panel tabs for use on the layout of phone? When I get a handle on the box widget, and re - size the smallest width of the presentation of the phone, it is clear. It doesn't seem to be a way to set the width.

  Under layers go to the content area and move the Textfields to the left and/or remove photos, after that you can resize the Panel tabs.

  Hope that helps

• Full-screen widgets in Accordion Panel tabs?

  Hello

  I can place a slide show in an accorddion or a panel tabs,

  but it seems impossible to make it full screen (is dimmed).

  I do something wrong, or is this a limitation of Muse?

  Thank you

  MM

  Hello

  His behavior by default, when you insert the slideshow in the container so inserted slide show is included in the area of containers in consequence the option full screen is disabled, because the inside of the container, it can not go full screen.

  If you place the slide show even outside of the container, then full screenoption will be activated you can check.

  Thank you

  Sanjit

• ToolTip alignment problem and Panel tabs

  Hey guys,.

  So, I build this site and I am using a ToolTip widget for a cursor of hero at the top of my page and just below, I use a widget panel tabs to links home video.

  The problem that I am running is that when I go to "site/page preview in the browser", it seems that widget panel tabs is off in alignment with the ToolTip even if muse are aligned. I used these two in tandum before and did not have this problem. I have something badly hit by any chance? Does anyone have a solution?

  Please try to remove any content html that I can see in the picture posted a "Live Chat", it might be in conflict.

  Also try to pin items and then check out.

  Thank you

  Sanjit

• Panel tabs on master goes to the first tab every time I change page

  Hi all

  I'm working on a project where it is important to have a widget panels to tabs as a sort of module on the right side of my site. This widget is the same through my site completely, it works by placing it on my masterpage.

  But can you help me with that? For example when I click on the 3rd tab and then navigate to another page on my website, the widget will automatically switch to tab 1. It would be great if she would stay in the 3rd tab.

  Help will be very appreciated

  Thanks in advance!

  Joyce

  Joyce-

  I understand your question. In your case, the focused tab depends directly on the user here and you want the active tab to be the one who chooses the user, no matter what page on the site, they were on - if the user chooses the second background image, you want this image of background remains the same for all pages of the site.

  Unfortunately, this isn't a customizable feature in the control panel tabs in Muse - once the switches page to a new one, it goes back to the first tab. An option to consider - instead, see target your site navigation by different pages, you can try a unique page design and navigation bring the user to different anchors on the page. Sorry I couldn't be more helpful.

  As this is a feature I've seen many users wish to implement, I suggest posting here: ideas for features in Adobe Muse

• Why is my Panel tabs or by default in the third tab, instead of the first, loading my page?

  I have a widget panel tabs on the home page of our Web site and it is essential that the public sees content on the first tab when the page loads.

  Subsequently, they can click on the other tabs to view the content. I tried to use "Arrange" "put on the map' by clicking on the object in the layout and also physically dragging the items in the layers of panels [i.e. to rearrange the order of the layers], however the opinion of the Committee keeps coming back to the third panel, which is the first in my list of layers. When I try to do this slide to the bottom of my layers for the composition of the first round table moves physically in the layout at the third round table.

  The idea is to have one appears downstairs, "Data Center..", ALWAYS showing on top and the one currently present on the top, "Engineering &..", ALWAYS on the bottom. As I said before, physically rearrange the order of layers is not working either.

  

  The tab that is open when you publish is the tab that will be open by default.

• Question of Panel tabs

  I created a panel tabs on one of my pages.  It seems to work correctly in Design view, but when I saw in my browser, the only Panel that works is the (first) top of the page.  Here is a link to the page: www.robertmunozphotography.net/Muse/Places.html.  There should be a slide show in each Panel.

  Any ideas?

  Robert

  I think the juicebox inserted inside the widget gallery could interfere with the Panel in Firefox. I see a bunch of errors related to juicebox.js in the developer console when I load in Firefox, but not in Chrome. Is a panel tabs without the work of juicebox incorporated properly for you in Firefox?

• Image of the ghost of a video built into a panel tabs (preview mode)

  What I am doing wrong?

  Use a Widget by tabs (tabs 3): the first tab with a (simplest) photo gallery widget. Parts 2 and 3 with 1 HTML embedded youTube video on each panel tabs.  Everything was coming together very well and when I saw the page everything worked as it should. It was last week I think. Have been cleaning up details on the site for a few days.

  Today, I was checking the widgets tab suddenly instead of the video on the Panel, I had a second identical floating on the upper left side of the page. I worked on the problem for a while, coming at last remove the HTML video rectangles and found I STILL had the extra video floating top left, even if the original has disappeared!

  After the experiences of much hair-tearing, wringing her hands and wild, I deleted the page and started from scratch, checking the preview after each trip to see if something strange was going on. Everything was going well until I copied the youTube embed code and pasted on the page. The rectangle appeared as it should, I have centered on it in the Panel and preview... PHOOEY! There were

  the additional video floating top left, invisible until I introduced in preview. At this point remove the main video removes the 'Phantom' as well, but of course, this isn't a solution.

  Here is the page with the inserted HTML code-

  

  And here is previewed

  

  You hear me screaming?

  Oh yes and when I insert the HTML code for the second video incorporating the 'Phantom' follows suit. A floating on the left corresponds to any video is visible on the widget. Is also important to mention that in the preview page, the video of 'Phantom' is not active, do not live, does not respond to the mouse.

  And now I discover as I go to another window (to write this) and then back to Muse, the video of 'ghost' disappeared, but he always comes back when I saw the page.

  Someone at - it a suggestion? PLEASE?

  Karen

  This looks like a bug with Chrome. The solution is to explicitly set the wmode in the YouTube embed code.

  "... www.youtube.com/embed/lzQgAR_J1PI?wmode=transparent" frameborder = "0"...

  Add the '? = wmode = transparent"to your existing YouTube code embed.

• Highlights around the selected tab (spry widget) in chrome and safari

  I created by meni tabs in Dreamweaver CS5 using the spry Panel tabs widget. All good but when tab is selected in Chrome and Safari destructive of some highlights will appear as in sreenshot. Can I control who and how.

  

  If Gramps code does not try this code:

  a: focus {}

  border: 0;

  outline: 0;

  }

  Good luck.

• Why a panel tabs are saved when it is installed in a file of the UIR?

  I started a new application, open a main panel to the IUR, then created a panel tabs on the main Board.

  When recording, the Panel tabs is still missing when the file is re-opened.

  I opened a second panel of test, did the same thing, but the Panel tabs still charges when the second test panel is reopened.

  CVI 2009, version 9.1.0

  Thoughts

  Hey clunden,

  Are you able to reproduce this problem with a new project, or have you seen the problem in a single file UIR?

  It seems that something has been altered in the UIR file that kept the Panel to be registered.  I think that it is unlikely that this is a bug in CVI, but if you're able to reproduce the problem in a new project, please let me know.

  Thank you

  Brandon v.

  Engineering applications

  National Instruments

  www.NI.com/support

• How to import tabs and widgets to the dashboard?

  Hello

  By default in the dashboard summary there are a few tabs: network, threats, Intrusion events, status and location.

  In this tab, there is a lot of different widgets.

  Unfortunately, I deleted a few tabs containing widgets inside.

  I have another console I can export all summary Dashboard configuration.

  But how can I import it?

  System > tools > import/export

  Then click on download the Package.

• How to open or return to the Panel tabs 2,3,4,5,6, etc. using a URL link.

  Hi all

  I have some problems with Spry Panel tabs. I use Dreamweaver CS6 and tried the code, as seen on this link URLUtils Spry help to open remote tabs and panels , but it did not help.

  My Tabs panel contains up to 6 tabs and maybe more that I do. I need help on how to return to the tab, I was after filling and display a form which is this tab?

  For example, I have form questionnaire on tab 3. How can I return to the same tab 3 after filing my form of questionnaire.

  Note here that when I click the button submit, the contents of the form are validated in the database, and the form will be redirected to the URL link that is attached to the submit button. This ULR link must have something comme.../interview.php?tab=3 or so it will load tab 3 once the page is updated after the presentation

  

  Also note that my site is still currently offline. It has not been added to internet as I'm just starting my project.

  Thank you very much

  Thank God I was able to identify the problem. The lnks tab are busy

  Here's what I did

  1. I created the tab 3, using the example, as seen on this link using Spry URLUtils to open the panels and remote tabs which I said was not helpful. In any case, I'm sorry for that. Please forgive me for my mistake.

  2 filled with content and adding a link tab = 2 #TabbedPanels1 what makes 3 tabs. See the image below

  

  My 2 tab is the tab text for more details .

  3. light that it worked, I replaced now the SpryAssets folder of the project that I worked on the SpryAssets folder I downloaded from the link using Spry URLUtils to open the panels and remote tabs and that's all.

  My conclusion here is that the SpryTabbedPanels.js that is automatically inserted in the SpryAssets folder of Dreamweaver has a fault code when it comes to adding links.

  So I give credit to the Powers of David which I believe is the author of the above code that solved this issue

• Ideas to explain why, when you work with raw files in LR 2015 with Edit in PS 2015 and use the Camera Raw filter, the profile in the Lens Correction Panel tab is missing

  Ideas to explain why, when you work with raw files in LR 2015 with Edit in PS 2015 and use the Camera Raw filter, the profile in the Lens Correction Panel tab is missing? Mac OS X 10.10.5.  I reinstalled the OS and Lightroom and PS, nothing helps.

  Hi ParadigmRose,

  This is expected as profile tab behavior does not appear under Lens Correction Panel if you go to Camera Raw Filter in Photoshop

  However, profile tab would be there if you open a raw image directly in camera raw first.

  You can go to the filter menu > Lens correction in Photoshop, if you want to search for profiles with edit in Photoshop.

  Kind regards

  Claes

• Panel tabs

  Hi all
  I'm new in the ADF and jdeveloper using 11.1.1.4.
  I create a page that contains the tabs Panel. My table is wide and is created 5 tabs in my control panel tabs. I have so many mandatory fields on my table and distribute them on different tabs. I entered the data on the first page, and then I moved to second tab it gives error to enter values that are placed on the second tab, third tab and so forth and unable to move on this pages. Please help me how can I move to other tabs and enter the required fields.
  
  Thank you

  Hello

  I would watch in surrounding fields required on the label with a

  af:SubForm
  

  tag. See this excellent example: www.oracle.com/technetwork/developer-tools/adf/learnmore/40-ppr-subform-169182.pdf

  It worked for me.

  Nigel

• I use a Panel tab and clicking on the tab links to a new page preview mode

  I am a new user and after adding a panel tabs in the preview by clicking on the tabs, it goes to another page and not the content of the Panel?

  Hi Chris

  test tab is linked to the page of testimony and special occasion is related to the black background.

  Please remove the links and it should solve the problem.

  Thank you

  Sanjit