Paper alignment Deskjet1510 HP printer does not print

Similar Questions

• HP Officejet 6500 e709n: default alignment and black ink does not print

  Adapting the failure message.

  Black ink does not print.

  I chose clean print head - more than once.

  It took several alignings, printer status reports, wiping excess ink and so on.

  After a day or more, the HP6500 Officejet 6500 e709n printed ink black.

  Just a note:

  My color ink cartridges are very low.

  I just use black ink.

  Thank you for your response.

• Subcircuit pines are not aligned with grid and does not connect

  I have two symbols the same sub-channel.  One is fine, but the other has pins which are not line up with the grid of MS and who does not yet connect.  MS12.0.0.

  This one is very good:

  

  The pins are off-grid.  The circle will not connect.

  

  Hello

  I did experiment a little with this. One thing you can try is to open the symbol Editor, select the axis that does not connect and then the spreadsheet view, change the shape of pine of length zero. Then try and see if you can connect to the PIN in the design. It will not appear as a line, but you should still be able to connect to it.

  If this does not work, you can open a service request and we can try to see how to solve the problem.

  I hope this helps.

• HP Officejet 6500 ink cartridge 920, Vista - alignment failed, black ink does not print

  I went through the diagnostic process because my printer gives me a view of alignment failed and my black ink will not print.   It is established that I need to replace the print head.  Is it complicated?  What should I do when I need the printer/fax every day?  I have no time for that computer to be down for a day, and even less for as long as it takes to get the part here and replace it myself.  Or worse, if I send to HP to have the work done.

  Replacement of the print head is not complicated, it can be done in 5 minutes.  Before doing this, you could be sure that the ventilation openings are not connected and you might try to soak the printhead as shown here.

• I need to add a new paper size, but my menu does not include the "custom" tab

  I have a HP Photosmart 8250 and use Windows Vista Home Premium. Using the HP site shows my menu, but my menu is missing from the tab "custom" just below the drop-down list on the paper/quality tab.

  I'll try to uninstall the printer and reinstall with the drivers from the Hp site.  I'm linking you to the software driver for your printer.  Let me know how it goes.

  HP Photosmart 8250

• Alignment of the field does not

  Hi, I am building a user interface with Blackberry JDE 5.0 using plugin Eclipse and test the app in Blackberry 9550 Storm Simulator.

  I'm trying to align a button may be down (first left, second right).

  I try first with a single and I can not aligned at the bottom.

  ButtonField propertiesButton = new ButtonField("Propiedades",ButtonField.FIELD_RIGHT);
  

  This is the complete class code:

  import net.rim.device.api.system.Bitmap;
  import net.rim.device.api.ui.component.ButtonField;
  import net.rim.device.api.ui.container.MainScreen;
  import net.rim.device.api.ui.container.VerticalFieldManager;
  import net.rim.device.api.ui.decor.BackgroundFactory;
  
  public class SplashScreen extends MainScreen {
  
      //BitmapField splashImage=new BitmapField(Bitmap.getBitmapResource("splash_image_"+Main.getDimentions()+".png"));
      Bitmap bg=Bitmap.getBitmapResource("splash_image_"+Main.getDimentions()+".png");
  
      VerticalFieldManager verticalManager= new VerticalFieldManager(USE_ALL_WIDTH | USE_ALL_HEIGHT | VERTICAL_SCROLL | VERTICAL_SCROLLBAR);
  
      ButtonField propertiesButton = new ButtonField("Propiedades",ButtonField.FIELD_BOTTOM);
  
      public SplashScreen(){
          super();
          //SETS background image
          verticalManager.setBackground(BackgroundFactory.createBitmapBackground(bg));
          verticalManager.add(propertiesButton);
  
          //ADDS Vertical manager REQUIRED!!!!
          add(verticalManager);
      }
  
  }
  

  When I run it, it shows the background without problems and it shows the TOP button. LEFT.

  What is happening maybe?

  The only thing I can think of is the "work area" is only at the height of the button, but vertical Manager USE_ALL_HEIGHT | USE_ALL_WIDTH, and if I set the alignment as ButtonField.FIELD_RIGHT properties it shows still left.

  Any ideas?

  Thanks for your answers, I will appreciate it.

  There is a brief description of how to implement a handler custom in Manager API documentation. There is also a very informative video from RIM:

  http://www.BlackBerry.com/DevMediaLibrary/view.do?name=HowToExtendManager

  There is also a good discussion of BB here layout managers:

  http://developerlife.com/tutorials/?p=808

  Below is a link to an another nice video RIM on how to expand the screen.

• eStation C510a Zeen problems-broken Scan & Apps does not print

  I have 2 new problems with my zineb:

  1. we will not analyze on an SD card.  It will preview the analysis but the locks upwards when you press the scan button.

  2. Printing apps won't work.  They eject a blank sheet of paper.

  3. still no sign up with eFax.

  Anyone else having these problems?

  HP Support AGAIN to me to do a hard reset on the Zeen by power off and then turn on the power while holding down the two volume buttons.  This allowed again my zineb lose all settings, including the home screens.

  After the reset of long-term, zineb on SD card scan works now and print now print correctly on paper.

  eFax still does not work.

• Camera HP photosmart C4480 printer does not print properly after changing ink cartridges

  My printer ran low on ink... I replaced both cartridges, after which I was instructed to print an alignment sheet. It does not write legibly. I tried to reproduce this sheet several times with no improvement in quality, therefore it does not meet an alignment check. How can I improve the quality of printing? On my old printer, I used to be able to "clean head", but it does seem to be this option on this printer, or is it?

  Hello

  -What version of Windows is installed on your computer?

  Please follow the steps mentioned below and get back to us with the results.

  Method 1:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01637692&cc=us&DLC=en&LC=en&product=3418705

  If method 1 did not fix the issue, please continue with method 2.

   

  Method 2: Update the printer drivers and check.

  Update the drivers of HP using the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=3418705&

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If still you face the same problem, I suggest that get you in touch with HP support for help.

  I hope that helps!

• new printing does not print

  I just installed a new HP Envy 4505.  The paper is loaded, but it does not recognize.  I have disconnected and reconnected power.  Follow the steps on troubleshooting.  No chance!

  Any suggestions?

  Hello JanFL,

  Welcome to the Forums of HP Support!

  I understand that DESIRE 4505 will not recognize the book you have loaded in it. To better help you, please answer money questions.

  1. This paper is loaded in the printer, weight, brand, size, etc.?
  2. What is the operating system installed on the computer that you are trying to print from, Windows or Mac?
  3. What you are trying to print, E-mail. PDF, picture, etc.?

  See you soon,.

• HP laserjet 1022 does not wait for the user to turn the pages when printing double-sided

  My Hp laserjet 1022 printer working properly for years.

  So far, when he executed more paper he tried a couple of times to get more paper and then stops with a message on the PC it is out of paper.

  Very annoyingly, this has changed recently, now when it is out of paper, he tries a couple of times to get more paper and watch the message on the PC, saying that it is paper and then again, try a couple of times to get more paper and again shows the same message on the PC and him back... This continues to go on and on.

  It's especially annoying when trying to print double-sided. Before he used to stop and ask you to turn the pages to print the other side. Now the previous behavior overrides the break to turn the pages and keeps it will try to get more paper. As now, it does not wait for the user to turn the pages, in general it spoils the impression out by getting another paper that is not what I wanted, he drives me crazy! It's really hard to print anything double face now.

  All solutions?

  Operating system is Windows 7, I just downloaded and installed the latest driver for this printer "2013-01-09, Version: 20120918" and I get the same behavior. In the properties of the printer that I put some State Messages to Off and at least I don't get the full windows message screen poping up every time the printer is trying again to get more paper. I have not found all the other parameters that may affect this behavior.

  Help!

  Hello

  I solved the problem! I found the original CD for the printer. I uninstall the current driver and then install CD and now when the printer is out of paper trying to get paper a couple of times and then stops, as it used to be.

  Thanks for your help.

  Martin

• Print module > Presentation > settings menu of the printer does not appear / Lightroom CC2015.3 / Mac 10.11.2 / Epson Stylus Pro 4880 printer

  I have the version 2015.3 of LR. In the print module, I click on the printer settings... button > Configuration > settings of the printer. The info for the loading paper and other settings window does not appear. I use an iMac 27 "new Yosemite 10.11.2 running. My printer is an Epson Stylus Pro 4880. I have updated the firmware and the software on this printer. Someone at - it suggestions?

  I found the solution: uninstall and reinstall the printer.

• Photosmart D110 'in paper' mistake, but the paper is present but roll will not stage paper to?

  It seems that there is a white nylon/plastic "thickness" with a roll built in. In addition, it seems that this piece is not working as well as we look at the paper the first tray (bonbout) does not move forward in what I call the breakpoint. When the printer does not see the paper in the next step it gives a "out of paper error ' on the LCD of the printer as well as on the computer screen.»

  The printer was hardly used although it is out of warranty. The ink is the color of 90% and 60% Black. My guess is that it is not worth it Pack and pay to have it fixed.

  Maybe the best I can do is find a HP printer that uses the same ink?

  Hello VPD2265

  If you have not already the case, please try the following article. It may solve your problem.

  Out of paper error

• Black ink does not print, message alignment is not

  Photosmart HP B210a more - black ink print do not. Put in a new cartridge even if there is still ink in another cartridge. A cleaned, check printing (only the color has shown), align printer has failed.
  Called customer support told them after that research problem that he said might need replaced print head. Gave me two phone numbers with an exhibit, waste of time with this option. I wanted to know the cost of replacement to see if it is worth)

  If you have already performed the steps in troubleshooting in the paper here I would soak the printhead as described in the post here.  Note that black does not print, alignment to fail.

• printer does not print black not ink and paper gets stuck

  Hello

  My printer won't print anything in black ink from last night. It prints color very well and my black ink level is good.

  In addition, it starts to get a lot of paper jams. I use regular copy paper.

  Ive tried the printer alignment and cleaning the ink smears, but that does not work because as I said the paper gets stuck.

  My printer is hp officejet all-in one printer-4630.

  Help, please! I really need to print something tonight!

  In the paper here troubleshooting steps can help solve the black print is not in your Officejet printer 4630.

  In a pinch, you can go to the configuration of the driver and select the type of paper Photo paper.  This will use the color cartridge to print in black.

  Problems here, the document includes information to treat the paper jam .

• HP Envy printer 5540: printer does not recognize paper 8.5 x 11

  I removed the paper 8.5 x 11 and printed several photos 5 x 7. I removed the paper photograph 5 x 7 and reinstalled paper 8.5 x 11 in the main tray. Printer will not recognize paper 8.5 x 11. I removed the paper and slid back the paper guides and reinstalled the paper. No change in the problem. When I select "Copy" on the screen of the printer and go to settings, it displays "tray and main paper tray: 5 x 7" if I try to print from the computer and select 8.5 x 11 paper, the printer does not recognize that size paper and continues to display paper 5 x 7.»

  Hello

  Open and close the paper tray, here, it will show on the screen of the size of the paper.

  Click on modify and change paper size we Leter and the type of paper, such as plain paper, then check all difference.