Parallel port Communication - resources is valid, but the visa can not access. East-1073807246 error code

Similar Questions

• After repeated close features, I still get the VISA error "the resource is valid, but the VISA cannot access to this.

  I'm currently building an application on a device cDAQ, which involves the use of a scale. The scale uses the RS232 communication, but is connected to an RS-232 adapter / USB and plugged into one of the USB ports on the cDAQ (COM 10). I am contacting the scale using the basic functions of VISA: VISA Open > VISA Read > clear VISA > VISA family. I created an application using the scale that worked correctly, but now whenever I try to access the scale - whether through MAX, a VI or a version rebuilt in the same application - I get the error "the resource is valid, but VISA can not currently access."

  The scale has three options for data transmission: "No. Data Output" "data output continues" and "Normal output when you press the Print button. I have it set to "data output continues, I don't know if this information is useful.

  The c-data acquisition is a NEITHER cDAQ-9138

  I have tried several things to get rid of this error:

  -Restart the cDAQ

  -Functions "Close VISA" running repeatedly on COM Port

  -Completely unplugged and powered off the coast of the scale

  -Connect the scale on a different COM Port

  -Repeatedly in the course of execution 'unblock port' VISA functions on COM Port, as a colleague has suggested that perhaps the problem

  None of them have worked.

  Does anyone have any suggestions of reliably, get rid of this error?

  I have attached a vi showing how I try to read from the device. Any help would be appreciated.

  A colleague of the Department of electrical engineering of the company has solved the problem. The scale has a material defect that will constantly try to communicate with a VISA session, even if the session is closed for a long time on the computer. Essentially, the VISA session on the scale does not, stop even if she ends up on the computer. He says it's a mistake he has not seen in 3-4 years.

  How to fix the error is to unplug everything from the balance and leave it unplugged for at least 30 seconds to make sure that all of his equipment off completely. When you plug the scale, it will be sensitive to a new VISA session. I tried it and the balance works again through VISA.

• VPN established but the customer can not access the internet... Need help.

  Hi all

  I'm trying to get a functional ASA 5505 appliance but does not always succeed. I managed to get connected to the ASA VPN client, but once connected, vpn client cannot access the internet. I am trying to route traffic from the client to the VPN server so I don't want to split tunneling. Here is the sketch of the testbed of the network:

  DNS:210.193.2.66
  |
  |
  Inside   ---------  Outside                         ---------          -------------------
  192.168.1.1 |         | 202 *. *. 84 202.*. *. 1.         |          [                  ]
  ---------------------- ASA |-------------------------------------  GW  |----------[ INTERNET ]
  |                   | 5505.                    |                |         |          [                  ]
  |                   | --------|                    |                 ---------           -------------------
  Host_A                                          | 202.*. *. 83
  192.168.1.5                                -------------
  | NetGear |
  | Router |
  --------------
  | 192.168.2.1.
  |
  |
  HOST_B |
  Physical addr:192.168.2.2
  Addr:192.168.3.1 VPN

  The ASA 5505 config is as shown below:

  Output from the command: 'show running-config '.

  : Saved
  :
  ASA Version 8.2 (1)
  !
  ciscoasa hostname
  activate 0cMYKRmmOdVhcSr4 encrypted password
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 202.*. *. 84 255.255.255.128
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  passive FTP mode
  inside_nat0_outbound list of allowed ip extended access any 192.168.3.0 255.255.255.224
  pager lines 24
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  IP local pool vpnpool 192.168.3.1 - 192.168.3.20 mask 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 202.128.171.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 192.168.1.0 255.255.255.0 inside
  http 192.168.1.0 255.255.255.128 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  enable client-implementation to date
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  dhcpd outside auto_config
  !
  dhcpd address 192.168.1.5 - 192.168.1.20 inside
  dhcpd dns 210.193.2.66 210.193.2.34 interface inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  Group Policy Reveal internal
  Group Policy attributes Reveal
  Protocol-tunnel-VPN IPSec
  username password alice tnbrh7ICan8mnq/Y encrypted privilege 0
  alice username attributes
  Strategy Group-VPN-Reveal
  tunnel-group Reveal type remote access
  tunnel-group reveal General attributes
  address vpnpool pool
  Group Policy - by default-Reveal
  tunnel-group show ipsec-attributes
  pre-shared-key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  !
  global service-policy global_policy
  context of prompt hostname
  Cryptochecksum:bfb0083a8eb2416e9cc27befe3b224d9
  : end

  a few thoughts

  permit same-security-traffic intra-interface

  NAT (outside) 1 your pool of vpn client

  ASA sysopt connection permit VPN

  ASA sysopt connection permit-ipsec

• I need to re - install CS5 after having my hard drive has changed. But when I try it says ' serial number [removed] is valid but the product was not found on this computer HELP!

  I need to re - install CS5 after having my hard drive has changed. But when I try it says ' serial number [removed by Mod] is valid but the product was not found on this calculation? Help!

  More information about this error is also available onhttp://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html who can refer you to contact support if necessary.

  Concerning

  Stéphane

• When a user logs off Windows 7 x 64 session, the rest can not access the internet until the restart network card

  Hello! I found a problem with my system: when a user logs off Windows 7 x 64 session, the rest can not access the internet, until restarted network card. Reinstall NIC driver did not help. Problem appears on a built-in adapter, in the motherboard and a separate PCI card too.  Same router via its web interface is not accessible. Windows cannot automatically fix this problem after trying to diagnose a problem with his problem Diagnostic tool. After the diagnosis in the DETAILS window, MORE tests, it displays a message like this "computer remote can not receive a connection via the Internet (HTTP) Service Port". "Unplugging" a corresponding Local network connection and then reconnect solves the problem immediately. Switching between users, when two of them are connected do not cause this problem. Important: the problem occurs in the account of the user who was logged on the system FIRST after the PC was on, when the user disconnected on newspapers of a SECOND. If the SECOND user is logged in and the FIRST user disconnects, SECOND can still access the internet. It depends only on the sequence of the user's record, not on the particular user name. And one more interesting fact: after each user registered on and outside just for once, the problem seems to disappear until the PC is turned off and turn it back on!

  System details:

  Motherboard: ASUS P8Z77-VLK
  CPU: Intel Core i7 3770 K
  RAM: 8 GB
  OS: Windows 7 x 64

  Hi, Mahesh,

  and thank you very much for your help! Update firmware driver and router LAN did not help me get rid of my problem, but greatly improved my experience of networking in general. Anti-virus software was not guilty, also, but! I found the "iControl" network software, installed as part of Sogiciel 'AI Suite II' (that came on the CD of motherboard ASUS driverssoftware), runnning and causing not only the problem mentioned above, but would also decrease upload speed up to 0.3 MB/s, when download passes to nearly 100 Mbps! Moreover, searching the Internet, I have found a lot of complaints about the behavior of this software, so that people watch you the occasional installation of this piece... sweet ;) As "iControl network" has been uninstalled (not only turned off in the settings of 'Ai Suite II'!), I'm totally happy with my system performance.

  Best regards
  Greg

• Burns DVD M30X, but the laptop can not read it later

  Hello
  I have a problem burning ISO to DVD - R files. After complete combustion theres something on it, but the laptop is not able to read the dvd properly and play or even open the program that it used too, when the dvd is insert. you have an idea what could be the problem and how to solve? Thanks for the support.
  Good bye

  Salvation of flow,

  You can try to do an update of the firmware with the DVD player.
  At the http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home, you will find a summary of the updates of the firmware.

  Rudi Bye

• Lack the profile can not access the Profile Manager, cannot be continued

  Yahoo somehow accessed and changed the settings of my browsers safari and firefox, could not change the settings for search engine default for more than a minute, even remove engine from yahoo wouldn't last a minute, so I deleted firefox, re-uploaded, now my profile is missing...

  I can not access the Profile Manager via the Terminal, I can't do anything, Firefox is not operational at this time and I don't know how to fix it.

  In Mac OS X v10.7 and later versions, the ~/Library folder is a hidden folder.

  • http://KB.mozillazine.org/Show_hidden_files_and_folders#Mac_os_x
  • http://KB.mozillazine.org/Profile_folder_-_Firefox#Mac
  • < User > /users//Library/Application Support/Firefox/profiles.ini

  See also:

  • https://support.Mozilla.org/KB/how-run-Firefox-when-your-profile-missing-or-inacc

• Adobe Reader does not work, the patch could not be opened. Error code 103

  original title: adobe reader software

  I have a windows xp and ie 8 and when I go to print a statement of a biller, the error code is 103:103 and it says that your adobe reader software does not have the patch cannot be opened. check that there is and that you can access.

  I suggest to uninstall Adobe Reader and get a nice drive more Windows such as this. I dropped Adobe years ago. Nothing but headaches.

  Foxit Reader
  http://www.foxitsoftware.com/PDF/reader/

• The visible but the pictures can not open the photo in "Photos".

  I just realized that some of my photos are visible as thumbnails on my Mac, but I can't double click to view. Just a blank screen. Most of them seem to be more old photos, but it seems fairly random. I am under the last El Capitan, and all software are up to date. I ran a repair on the library, and nothing has changed.

  Suggestions?

  Thank you

  What has changed since things worked? Do you have 'cleaned' your disk by removing pictures using the finder or nasty as CleanMyMac or MacKeeper software (never do this)?

  LN

• How to remove Cloud Creative sign in the data, but the computer can not be used.

  I have uninstall creative cloud app before disconnection. I want to remove the activation key for the computer.

  What can I offer? Communicate with staff support from Adobe?

  Thank you ~.

  Reinstall the VAC then disable this computer after you connect

• The file is not compatible with InDesign (error code: 14)

  Hello

  I'm on OS X 10.8.2, MacMini end 2009, 6 GB RAM, 190 GB OS Partition with 89 GB free, Adobe InDesign CS6. InDesign is authentic, it is licensed to cloud.

  I get this error for any file I am trying to open. Although files each time I remove recovery of InDesign, InDesign opens, but when I try to open any file I get this error.

  Initially, I tried to open document library. Looks like I get this errors whenever a ddocument has a library to him atttached. Creating problems?

  Any solution?

  Kind regards

  Sebastian

  We will try other minor surgery.

  Close ID (I know, it is already closed).

  Trash the prefs.

  Bin data recovery.

  Recycle Bin, the files listed here: Forums Adobe: InDesign crashes at startup

  Trash ALL the files. XML 'Current' working space in your library user in the folder of the workspace. You can leave the base files. Simply remove the current configuration of those that they can refer to the missing library.

  Temporarily remove the FontXplorer of ID plugin.

  Try to open the code.

  If it works, close and move the plugin back, and then try again.

  If you still have problems, see Troubleshooting fonts | Mac OS X

  It is possible that the stuff of office has done some damage to ID, too. If all else fails, uninstall, run the clean tool (CS for installation problems cleaning tool |) CCM, CS6, CS5.5, CS5, CS4, CS3) and reinstall and update the ID again.

• Can not access the updates XP, 0x8024400A error message.

  I reformatted my HARD drive, reloaded XP SP2 Home. Download IE 8. I need XP SP 3, but now I can not access the updates... 0x8024400A error message.

  Help please

  Hello

  Install SP3 by downloading and running from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  You can ignore the text that says it's for network installations and also ignore the text advising windows/microsoft update if a single update of a PC.

  This should move your 0x8024400A problem. So try and get up-to-date with the Windows updates. You will probably have to go through Genuine Windows Validation.

  Tricky

• all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not helping

  all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not help somehow

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • http://KB.mozillazine.org/Error_loading_websites

  You can try to reset (power off / on) of the router.

• I have InDesign CS5.5 for 2 systems - my laptop crashed and I now have a new with Windows 8.1.  I downloaded the correct version of InDesign, but when I enter my l series #, the message reades # is valid, but the software cannot be raised

  I have InDesign CS5.5 for 2 systems - my laptop crashed and I now have a new with Windows 8.1.  I downloaded the correct version of InDesign, but when I enter my l series #, the message reades # is valid, but the software cannot be found on the system.  It seems that the program PageMaker 7 which is not on the new computer.  How can I load my InDesign CS5.5 on the new computer laptop?

  If you purchased InDesign CS5.5 as an upgrade then it looks like it's showing that you need to provide information about the old version where you improved since he found nothing that qualifies.  You must only choose the old version and serial number.  (I don't know anything about InDesign, nor how it might relate to PageMaker).

• zynga took my moms account and changed password for facebook and e-mail, she followed the steps to change the password, but the link does not work

  I gave this e-mail address to answer to another email user but my password has been changed and nt theres initially asked

  zynga took my moms account and changed password for facebook and e-mail, she followed the steps to change the password but the link does not work as it changes the password of my account, she tried this link 3 times now is there anything else she can try.

  Hello

  ·        What operating system is installed on your computer?

  ·        What browser do you use to connect to the internet?

  ·        Which email service provider you are talking about?

  Because the problem is linked to facebook I suggest you to post your query on facebook forum for assistance:

  http://www.Facebook.com/help/community/