parameter to start two-digit year in the config of trinidad does not

Similar Questions

• Windows wars Napoleon Cossacks 8. I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?

  Wednesday, April 15, 2015, 17:56:29 + 0000, PhilipMallard wrote:

  I bought a Windows 8.1 today and wish I hadn't! It's a pain to use (I had a Windows 7 previously). None of my games of Cossacks work on windows 8.1 either and I've tried them in compatibility mode. Is it possible to install Windows 7 on my new computer and replace the disastrous 8.1 version?

  I would like to point out something that you may not realize: Windows 8
  has two interfaces; the modern/Metro Interface (which may be all the)
  you have looked at) and the traditional desktop Interface. You can use
  one or both. This traditional desktop Interface is almost
  identical to the interface of Windows 7. the biggest difference is that
  There is no Orb start clicking to bring up the start menu.

  But note that you can get the ORB start by using one of the many
  third-party programs, are free or very cheap (the classic interface
  http://classicshell.sourceforge.NET/ and debut8 to
  http://www.stardock.com/products/start8/; my personal preference is
  Debut8, but they are both very good).  And goes from an interface to
  the other is very easy; There are several ways, but simply by pressing
  the Windows key is perhaps the easiest.

  Just install one of these two and using the traditional desktop computer
  interface may be a better choice for you than going to Windows 7.
  I use Windows 8, almost exclusively with traditional workstations
  the interface and with 8 Start installed. If you were to look at and use
  my computer, you may have a hard time realizing that it is not
  Windows 7.
  I also recommend to read "how to make Windows 8 or 8.1 watch and.
  Want Windows 7 "to http://www.howtogeek.com/elk/298/45121/4206
  I can't address the issue with your games, except to say that
  whenever you move to a new version of the operating system, some of
  which is used to run on the former does not work on the new. And it's
  much more likely with utilities and games with companies
  applications.

• Bought two of the iTouch, one for my wife and one for me. In the Notes his has the "" symbol for the formatting and mine does not work. Any suggestions?

  I bought the iTouch two at a time, one for my wife and one for me. In the application 'Notes' my wife shows the symbol "+" to the formatting and mine does not work. Any suggestion.

  Could you please include screenshots of the so-called issue?

• Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3

  I hope this helps...

• My HARD drive is detected by the BIOS, but it does not start

  I have a laptop, OS is Window7, the HARD drive is detected by the BIOS, but it does not start, I formatted and the procedure going well until the reboot, it starts not to finish formatting.
  Please, I need help!
  Thanks in advance

  Hello

  Sounds like the hard drive has failed, or other hardware issues affecting the reader by the mother-
  Board or wiring.

  Check with Lenovo support, online documentation and diagnostics and ask questions about known issues in their
  forums.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  ---------------------

  The manufacturer Diagnostic utilities - use them to check the disk.

  (The old 302602 links isn't now valid for Diagnostics links).

  Manufacturer diagnostic utilities - run one to your hard drive
  http://www.techsupportforum.com/hardware-support/hard-drive-support/462298-no-IDE-device-found.html

  Corrected list dated 06/09/2010

  Fujitsu hard drives: utility of diagnosis here
  http://www.Fujitsu.com/EMEA/products/HDD/

  Hitachi hard drives: utility of diagnosis here
  http://www.HitachiGST.com/support/downloads/

  IBM hard drives: use Hitachi utility *.

  Toshiba hard drives: use Hitachi or Maxtor utilities

  Maxtor hard drives: Diagnostic Utilities here (now SeaGate)
  http://www.Seagate.com/www/en-us/support/

  Quantum hard drives: use the Maxtor utilities

  Seagate hard drives: here Diagnostic utilities
  http://www.Seagate.com/www/en-us/support/downloads

  Conner hard drives: use the Seagate utilities

  Hard drives Samsung: utility of diagnosis here
  http://www.Samsung.com/global/business/HDD/

  Hard drives Western Digital: utility of diagnosis here
  http://support.wdc.com/product/download.asp?lang=en

  Trial versions of one of these 'might' help.

  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• my computer has the power, but it does not start.

  my computer has the power, but it does not start. crancking for several minutes, after that it will quickly be able to record and then it starts again. Also, he asked once to restore to an earlier date that I did. He worked for a night, but come back to the same thing. Help!

  Hi moozer_890

  
  1 during how long have you had this problem?
  2. have you updated display drivers installed on the computer?

   

  Method 1 :
  To resolve the problem, you can see if the uninstall and reinstall then the display driver-
  Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically.
  
  Method 2:

  If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site, then check.

  You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• Whenever I start my computer I am able to get to the loading screen, but the computer reaches the login screen it restarts. This happens all the time. It does not matter what I try to start if no failure or normal startup mode

  This happens all the time. It does not matter what I try to start if no failure or normal startup mode. I tried to use the repair from the vista cd. It's 64-bit computer with AMD phenom processor and an Asus motherboard there is a HDD 500 GB and 4 GB of memory.

  you have AVG Antivirus?

  If so, these instructions will fix it: http://forums.avg.com/ww-en/avg-free-forum?sec=thread&act=show&id=94159

  teengeek.freehostingcloud.com

• I try to enter the serial number to register my software, but the label outside of the box, he's starting with the letters and it does not accept the letters... . Only numbers

  I try to enter the serial number to register my software, but the label outside of the box, he's starting with the letters and it does not accept the letters... . Only numbers

  Serial numbers contain no letters, so maybe it's your redemption code, for use on adobe.com to get your serial number.

  Here are a few links to look for more information

  https://helpx.Adobe.com/x-productkb/global/redemption-code-help.html#productboxorprepaidca rd

  Quickly find your serial number

• The slide show feature does not work when I used my Apple TV new 4th gen. I have all the minimum requirements for Macbook and Macbook OSX the Airport express. The slide show starts and stops after that 7 photos are displayed on the TV. If I change the

  The slide show feature does not work when I used my Macbook with new Apple TV 4th gen. The slide show stops after that display 7 photos and display to select the options for the slide show is displayed on the screen. The selected interval was 5 seconds. If the interval is spent in 3 seconds the slide show would work for a time and then to display random images. Has worked with Apple on this issue Support Mike and he managed to reproduce the problem. Since I'm in the return period of 14 days for this product, I returned it to the Apple store

  Welcome to the Apple community.

  After returning, I'm not really clear on what your question.

• The Godfather 2 game does not work in windows 8, it is not even start. can anyone help? pls?

  pls... can someone help me to play the Godfather 2 in windows 8? Thanks in advanse.

  Hi Hugh,.

  Thank you for joining Microsoft Community!

  According to the description, it seems that the Godfather 2 game does not work in Windows 8.

  We have no information about the game in the Compatibility Center.

  I'll have to install the game in the Compatibility Center and check out:

  Visit this link to learn more about the compatibility.

  What is program compatibility?

  http://Windows.Microsoft.com/en-us/Windows-8/what-program-compatibility

  Right click on the Setup file and install the game in compatibility mode. Visit this link for steps to install the game in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Using the windows-related issues feel free to post on Microsoft Community.

• When I click to open thunderbird but the e-mail window does not appear until the icon shows the app closed, how to fix this?

  To start thunderbird, I click on the quick start on my toolbar icon, it highlights that if beginner, then a few seconds later, returns to the closed state. No e-mail window never appears on the screen. When I check the Task Manager, thunderbird does not appear in the list of running applications, but one or two processes show running on the Details tab (one first process by clicking on the icon, and then another if I right click and try to open one of the windows in option). I am running Windows 8.1. It worked well earlier in the day, so I have no idea what happened past. Restart the PC does not help the issue. How can I get the windows thunderbird appears on the screen again? If I can't, please send the instructions to backup all the associated email and address profile information so I did not lose anything... then uninstall and reinstall thunderbird and restore all the info related to my current profile. Thank you.

  Thanks for the reply... still not sure what happened, but I ended up uninstalling and reinstalling bird t. Everything is back to normal after that. So your solution can work, but I don't have the chance to try it. My solution, but is not ideal, was effective and the problem was solved.

• Firefox does not (Cup) of the lower edge and the right edge of the graph. IE10 does not work.

  Firefox does not (Cup) of the lower edge and the right edge of the graph. IE10 does not work.
  Office Windows 7 2009 service pack 1 Firefox 26 Internet Explorer 10
  Flash player version 11.9.900.170 plugin 11.9.900.170 activex version used by Firefox

  Problem began late November when Miniclip.com forced updated flash player to version above
  -C' was when they started to play a video advertising in the game box before you could start.

  Have screen shots of IE10 and Firefox26 side-by-side clearly showing the problem - how these can be downloaded for see you? E-mail? Web site? This place seems to be text only?

  In the meanwhile the grandchildren and self have learned to use IE10 instead of Firefox that we prefer.
  Their House of Windows XP has same Flash Player in Firefox and it works fine.

  Downloaded two screenshots on Media Gallery.

  You can not attach a screenshot in the first row who starts a thread, but you can do it in subsequent responses.

  Try disabling hardware acceleration in Firefox (you will need to close and restart Firefox).

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  See also:

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)
  • http://KB.mozillazine.org/Zoom_text_of_web_pages

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul

• DV6-6c15nr, "the system recovery media does not support this computer."

  Hi all. I'm trying to reformat my laptop (dv6-6c15nr), but when I try to reformat to f11the recovery manager f, all options are such that the system restore and restore to factory is grayed out. The next thing I tried was a set of recovery disks. When I used the recovery disks, it showed the message "this computer does not support the system recovery media. You are not able to restore the system with the media. 0110 A601UA #ABA - A1U60AV. Why can I not reformat my laptop... I remember that I was able to reformat until I sent offshore to get the hard drive and the radiator replaced by hp year last April. Now I can't get to... that this has to do with anything? someone please help...

  I also tried without the bios downgrade F.19 REV: a. which do not help either.

  It seems that the motherboard may have been changed and the information system (tattoo) has not been updated to match that of your computer. While I can't fix this for you, I can suggest some possible solutions and I work to spare;

  (1) you can contact HP Customer Support and ask that they correct the problem.

  (2) attempt to control that recovery discs for the model of the motherboard is currently labeled as.

  (3) If you can still read the Windows product key of 25 characters on the Microsoft COA affixed on the computer, you can install Windows 7 using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7 SP1, create the installation media and install Windows 7 SP1 using the 25-digit key from the COA Microsoft on your computer.

  If you have any other questions, feel free to ask.

   

  Please click the White Star of KUDOS to show your appreciation

• Does not display the images and CSS does not work generated WebHelp

  Hi all

  I have two issues which I believe are related. It miss me probably a simple step somewhere, since I can't find this issue covered in the forum or help.

  We have just upgraded to RH7 to RH9. When I build a project to test, the CSS was fate not (it was connected properly in the topics of the project, but he was not released when the WebHelp has been generated). Trying to open the CSS file directly led to a 404 error.

  I was able to solve that by checking the "Apply to all" button and selecting the CSS file we use (see image). However, none of our lists - ordered and unordered - are properly formatted. The font and size of numbered lists is incorrect, lists all nested lists display with numbers, even if they are not ordained and autonomous bulleted lists use evenly filled as circles dig balls, where previously they used the small squares, circles, or a picture of triangle. The CSS is called correctly in the subject, lists are formatted to use the styles and the styles are in the style sheet, so I do not know what causes this problem. So far, I have not noticed any other styles does not, but those are the ones that stand out.

  

  The other problem is with the images. This problem appears in both our WebHelp generated and in the printed documentation. The images are not output. In WebHelp, the text appears (typically the name of the file). in the printed documentation, nothing appears. (I checked all the printed documents that "embedded" is selected, but as far as I know, there isn't a similar function for the WebHelp).

  What Miss me? Thanks in advance for any help!

  Source code control is involved?

  So you can see the CSS in the project manager and it works very well in the design editor but does not every time that you build for. Can you just build or generate and publish? You use Windows Explorer to check the CSS in both places?

  How do you get a 404 error? This happens when you click on a link where the target does not exist. Normally you would use Windows Explorer to locate the CSS.

  Lists are a known problem on upgrade from 7. See the lists on my site.

  The images show in the project manager?

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge