Parent refresh after modal close when you use the .show_modal method

Similar Questions

• To access the properties of an Error Message When you use the DisplayRunTimeErrorDialogEx method

  I have a reminder that displays the standard runtime error dialog box using the method Engine.DisplayRunTimeErrorDialogEx of custom error. http://zone.ni.com/reference/en-XX/help/370052H-01/tsapiref/reftopics/engine_displayruntimeerrordial....  The parameters of this do not allow me to specify information about the error message available (via the properties of the stage of the appeal of error).  However, when built-in bed in treated TestStand display dialog runtime error through its methods of error handling he managed to fill in the details about the error.

  Anyone know how I can fill in the details and the error code from the dialog box fields when you use the DisplayRunTimeErrorDialogEx method to call it? See attached screenshot by one example of what I get when I use this method.

  Kind regards

  David

  Doug is correct; each sequence in the call stack has its own sequence context, so if you just "ThisContext" for the sequence context parameter, you provide the framework for the error callback, which has no error.  To access the context of the sequence that wrong, you use the caller property to get to the next level in the call stack, for example:

  RunState.Engine.DisplayRunTimeErrorDialogEx ("error Dialog", ThisContext.Caller, 0, False, False, False, False)

  I hope this clarifies!

• get the error when you use the TRIM method in the collections

  Hi Experts,

  When you use the TRIM method I get below error. I make any mistake here?

  DB: Oracle 11g

  SQL > declare

  2

  emp_tab of type 3 is the employee table % rowtype index directory.

  4 l_emp_tab emp_tab;
  5

  6 start

  7

  8 select * bulk collect into l_emp_tab of employees;

  9 l_emp_tab.trim (5);

  10 dbms_output.put_line (l_emp_tab.count);

  11

  12 end;

  13.

  l_emp_tab. Trim (5);

  *

  ERROR on line 9:

  ORA-06550: line 9, column 2:

  PLS-00306: wrong number or types of arguments in the call to 'TRIM '.

  ORA-06550: line 9, column 2:

  PL/SQL: Statement ignored

  Thanks in advance for your help.

  See you soon,.

  Suri

  For PL/SQL collections "index by" you cannot use the TRIM function. If your collection statement excludes the portion "index of...» ", then you can.

  Gerard

• Loop Finder crash after upgrading to El Capitan.  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English operating system.

  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English.  The e is a compatibility issue with dropbox or Google drive in El Capitan?  Those are the plug-ins only that I could find.  Thank you very much.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• When you use the feature of period of Parental controls for my child's account, the session is saved, and although very convenient for the user, it's boring for the parent. How can I disconnect this acct when it expired already?

  When you use the period of Parental control feature, acct of my child receives the 15 min and 1 put min warning, and then the closure of the session. However, any Web site that it has a really annoying music keeps playing even when I connected under my account admin the only way I can disconnect the acct with Parental control game is to restart my whole machine. Is there another way to disconnect the user standard acct with this feature of limitation in time game? THX.

  Hi marion_librarian

  Thank you for using the Microsoft Answers Forums!

  This is the problem of design, the session remains active in the background, however, so the next time they connect, they can pick up where they left off without losing any of their work.

  In case if you complete the program, there is no these settings in the parental control to close the program, you can disconnect the program using the Task Manager.

  Check the link for more information:

  Explore the features: Parental controls:

  http://www.Microsoft.com/Windows/Windows-Vista/features/parental-controls.aspx

  Set up Parental controls:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  NOTE: When you log in as an administrator you can connect to the wide of other users. Follow these steps to log on to the account with Parental control and/or any other user.

  1 click-right on the taskbar and open the Task Manager.

  2. Select users

  3. right click on the user name you want to disconnect, and then click close session.

  Hope this information was useful.

  Let me know if it worked.

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• TestStand crashes when you use the feature of LENGTH

  So I have a problem when you use the TERM built on stage.

  the first time I run my sequence everything goes normally...

  the second time I try to run the sequence it freezes teststand.

  I have notices that when I run my sequence. I can see on TRACK OR the following:

  niSE_opensession

  niSE_connect (routex)

  nise_disconnect.

  but after that the sequence is complete. It is not close to the niSE sesion. that this has something to do with the gel TestStand?

  If this isn't the case, have you had this question before?

  I contacted pickering... they got me new drivers

  Response of Pickering:

  It sounds like the problem which came first when NEITHER Visa has been changed, version 5.2 or higher, I think. In any case, I'll try first to install the latest version of the Pickering IVI driver.

  http://downloads.pickeringtest.info/downloads/drivers/IVI/pi40iv_4.10.1.exe

  I installed them and it works now...

• Possible to force overwriting of files when you use the method. render()?

  Hello world

  Hope all are well.  I looked at the documentation available in the Guide scripts of the effects after, but could not find any information on this.  Is it possible to force overwriting of files when you call a rendering method. render() in a script?  I know there is a constant that can be used to force overwriting of .aep project files when you use the method. close() on the app object.  For example, it's documentation:

  Action to run on close. A CloseOptions enumerated value, one of:

  CloseOptions.DO_NOT_SAVE_CHANGES : Close without saving the changes. CloseOptions.PROMPT_TO_SAVE_CHANGES : Whether to save changes before closing.
  CloseOptions.SAVE_CHANGES : automatically record on the end.

  Is there something like this for managing conflicts of files during the rendering process?

  Thank you
  Arie

  That's what I do. It seems to work:

  app.beginSuppressDialogs ();

  myProject.renderQueue.render ();

  app.endSuppressDialogs (false);

  Dan

• Tecra M5 - crashes when you use the docking station - fan at full power but no start the thread

  Hi all

  As I say, I have intermittent problems where the machine crashes when you use the docking station. Sometimes at the beginning of the startup of windows then stalls and powers of fan at full power. If I take off the base of the machine, it works fine.

  I bought this machine because I had one in my previous job and he had found great. However, my only previous also had this problem sometimes when lashing...

  Any assistance received very warmly.

  Thank you!

  Hello

  Stand by. You have noticed this behavior when the laptop is OFF, connect to the docking station and after doing this you turn. Am wrong me or have I misunderstood something?

  Maybe's external screen connected to the docking station?

• Satellite L40 crashes when you use the product recovery disc

  When you use the product recovery disc to repair my laptop it hang after language page display.

  Select meaning when it displays the language, I select language and press next, no action more far there... I can move one pointer.

  Some may help how to solve the problem.
  Thank you

  > Select sense when it displays the language, I select language and press next, no action more far there

  Perhaps, your recovery disk is corrupt. What happens if you try with Windows disk copy?

• Need to reset the button by default when you use the structure of the event?

  When you use the buttons with a mechanical action "releasing lock" to only trigger the same structure with the same 'value has changed', the button does not jump upwards as you would expect.  I can get to behave as I want by adding a "default reset" invoke the node, but this seems somewhat exaggerated.  Is there an easier way to get the button to jump to the top after pressing on?

  The button will reset once it is read by the code. This means that the terminal is inside the structure of the event. If you move outside the terminal, it would read only the beginning of the race and then never and it will not be reset.

  If the terminal is learn the structure of the event, it is read by the code (even if it is not connected to anything) and it reset as soon as the event has a chance to run.

• When you use the Windows XP Mode integration, it fails; maintains a new attempt and finally I have to cancel

  When you use the Windows XP Mode integration, it fails; continues to try again and finally I cancel it. The same newspaper for Virtual PC on the host computer has the following error message: Windows XP Mode integration error 'failed to connect in place inside the "Windows XP Mode" VM on channel 0 on the... named pipe endpoint XP, TCP port 3389 with the 0x8007274c error mode. This error occurs every time, but I don't know why he is successful a few times and sometimes fails. This question was in another post and mentioned the removal and resettlement components of integration, which I've tried, but it did not help. I also checked that I have the latest version of the integration components (v. 14.1.7600.16403). I have a separate instance of Virtual PC that I brought over my old XP machine and it was never a problem with integration. The problem with the image in XP Mode occurs also, regardless of whether or not the other Virtual PC image runs. Only the image of the XP Mode has this problem. I suspect it's perhaps a conflict of TCP port in the named pipe, but if so, I don't know how to solve. Thanks in advance to anyone who might be able to offer advice.

  Thanks for the reply. I tried to reinstall the integration features in the past, but the problem has come back at a later date. A few days after I posted this request for assistance, I needed to log out of Windows 7, so I hibernated the XP Mode image. Then, I opened a session in Windows 7 and thought I'd give it a try once again, and it worked this time! I did nothing special. So hopefully that will happen in the future, just as it went and on the past few months. Enjoyed your attempt to offer advice, however!

• Can I turn off notifications by e-mail of Echosign when you use the API

  Hello

  I am trying to create a personal widget using the EchoSign API and I noticed that EchoSign sends an e-mail to the user with the signed copy after that that they have signed.

  Is there a way I can disable all notifications by e-mail of EchoSign when you use the API?

  Please contact support, or the Manager of your success.

• SpeedGrade hangs whenever it is launched stand-alone and never works when you use the direct link to first.

  SpeedGrade hangs whenever it is launched stand-alone and when you use the Adobe SpeedGrade of first Direct link it closes only first. He never try to open same SpeedGrade. All effects have been removed and I managed with this in the past using CC, it is a new problem. Any ideas?

  FxFactory plugin looks at the origin of the crash. Please update the plugin, which should solve the problem.

  Thank you

  Fran

• No idea why, when you use the Source of the Image changes it overwrites the content?

  No idea why, when you use the Source of the Image changes it overwrites the content?

  Its a really great tool and I want to use it as I have a complicated trajectory I want multiple items to follow, but to have many different PNGs. but when I change them it overwrites the content?

  Thanks in advance

  Scott

  Hi, Scott.

  It is likely that you touch the question where the dimensions of the old image are used when change you to a new image.  It is a known issue for the latest version of edge animate CC and we try to fix it in a future release.  Unfortunately, the only thing you can do is to change the dimensions of the image after you exchange.  You can also copy and paste the path of an element to another, if it would help.

  Hope that helps,

  -Elaine