partial trigger for a component in a pageFragment to pagefragment of parent?

Similar Questions

• 11g - partial trigger on table master / detail does not

  Hello
  
  I do slip and fall a child vo to a page as a 'master table of detail. " It creates two tables, one for the parent and the other for the child. The childTable has parentTable as his partial trigger, when the selection on modified parentTable, childTable the data as changed.
  Now, all this is broken when I join parentTable with panelCollection. The error in the editor said that the childTable cannot find any component with the id indicated in the partialTrigger property.
  So, how can I enable 'partialTrigger' ing when using panelCollection?
  Thank you.
  
  Kind regards
  
  Rudi

  Click the Edit to the partialtrigger option and then browse to choose your table.
  Note that you need to provide an I would for bounding Panel collection first.

• Problems with partial trigger

  I have a button "Edit" in the box for which submit partial is enabled. When I click that button, I want to make the button 'Save' outside of the box and when click on the "Save" button I want to make the change and hide him save button button. I put partial triggers at the level of the Panel for these two buttons box. Then click on the button Edit, I'm able to hide the edit button, but unable to make the record button. I suspect this partial trigger on Panel box does not apply to components outside of the Panel. Please advise something to achieve.
  
  Thank you
  Satya

  Satya, please indicate your jdev version!

  Have you used the rendered property or the visible property to show or hide the buttons?
  You use the visible property for this to work. Your backup need button a partial trigger tuned on the button modify and edit button one listen to the record button.

  Timo

• ADF: Partial trigger in one column of a table

  Hello people!
  I have a master - form detailed with departments - employees (HR diagram).
  In the VO of departments, I have a column transitional 'TotalSalary"calculation of the amount of the salary of all employees by the Department. I use the expression Employees.sum ("(salary is nothing)? 0: salary ").
  
  In the column .jspx Salary is AutoSumitted and partial target runs 'TotalSalary' salary.
  The result is fine, but the issue I'm having here is how NOT having all the Department table refreshed with every single change in detail, but only the TotalSalary column.
  
  Suspicion. I dragged once more the transitional column outside the table, and I noticed that the outfield is updated immediately, but the field within the table NO (because the table does not update).
  
  Could you please provide any help!
  
  Thank you very much!

  I had a similar problem. The only way is to update the table. The partial relaxation for a single column in a table works only if the trigger is also a column to the table.

• Trigger for USB-6251analog

  Hello

  Generate a rectangular signal of AO on AO0 (white) while playing a Sin on AO1 (red) signal. I want to record on AIx, while the tension of the rectangular signal is max.

  

  Currently I physically route AO0 to PFI0 and use it as a trigger for the analog input:

  

  But the VI fails because AIx does not detect the edge of the PFI0 of the trigger. How to fix the VI to work proberly?

  Thank you

  VI can be found here: http://forums.ni.com/t5/Discussions-au-sujet-de-NI/USB-6251-router-Analog-output-pour-trigger-Analog...

  Hafiz asean.support solution:

  I looked at your code and there was a problem with the installation of the acquisition of the chain to HAVE.

  Acquisition of analog input has been configured incorrectly
  In your code, you set the program to use calendar settings based on a waveform. However, when you build the waveform, I believe you accidentally used the frequency instead of the dt of the waveform to build. Removal of the inverse function ensures that the correct values are passed in. Originally, the AI sampling period was put at about 4000 seconds, which in turn causes the trigger to expire.
  

  Take note that the production and the acquisition is not exactly at the same time. You can see the following diagram:

  

  Thank you haha!

• Help design a trigger for an analog voltage signal

  Hello guys,.

  I have a real problem one design trigger for an application, what I do is to power a motor and measure consumption current and voltage during each operation. What I would do is to begin to acquire the signal once the voltage rises to a certain value and finish when it falls to a certain value. The equipment I use is a cDAQ 9178 with a NI9205 and 9221 modules.

  Any help / samples / detailed explanation will be really appreciated. I have no idea on how to work with the outbreak of the vi in Labview.

  Concerning

  SergeArmz

  Finally after a lot of research, tests and many developments, this is a VI that I developed and who is able to do what I was looking for. Thanks to the guys who helped me out to understand how solve my problem.

  For all those who may have the same problem I had, I enclose the VI.

  And of course if you can improve on what I did will be great, I think it's the purpose of this forum

  See you soon!

  SergeArmz

• How to write the trigger for update or delete multiple columns in a table?

  Hello

  I create one in the form of table of sample_emp. In that, every time I want to change of name, team_id, team_leader_id, supervisor_id, manager_id it must store the update-able and old values of those in the job_history table. When I write the trigger for which it shows "ORA-04082 new or the old value not table level triggers. Here is my emp_table. My table also similar job_history like this. Need your help.

  Header 1	Header 2	Header 3	Header 4	Header 5	Heading 6	Heading 7	8 header	Header 9
  EMP_ID	EMP_NAME	DESIGNATION	TEAM_ID	TEAM_LEADER_ID	EMPLOYEE	MANAGER_ID	HIRE_DATE	RELIEVED_DATE

  --

  Thank you.

  Hi Joel,.

  Venky_prs wrote:

  Hello

  I create one in the form of table of sample_emp. In that, every time I want to change of name, team_id, team_leader_id, supervisor_id, manager_id it must store the update-able and old values of those in the job_history table. When I write the trigger for which it shows "ORA-04082 new or the old value not table level triggers. Here is my emp_table. My table also similar job_history like this. Need your help.

  Header 1	Header 2	Header 3	Header 4	Header 5	Heading 6	Heading 7	8 header	Header 9
  EMP_ID	EMP_NAME	DESIGNATION	TEAM_ID	TEAM_LEADER_ID	EMPLOYEE	MANAGER_ID	HIRE_DATE	RELIEVED_DATE

  --

  Thank you.

  You can try something like this given below to complete the historical table on update and delete.

  create or replace TRIGGER  "CLONE_EMP_UPDATE_DELETE"
  BEFORE DELETE OR UPDATE ON EMP
  FOR EACH ROW
  DECLARE
      PRAGMA autonomous_transaction;
  BEGIN
  INSERT INTO JOB_HISTORY("EMP_ID","EMP_NAME","DESIGNATION","TEAM_ID","TEAM_LEADER_ID","SUPERVISOR_ID","MANAGER_ID"
  ,"HIRE_DATE","RELIEVED_DATE")
    VALUES(:OLD.EMP_ID,:OLD.EMP_NAME,:OLD.DESIGNATION,:OLD.TEAM_ID,:OLD.TEAM_LEADER_ID,:OLD.SUPERVISOR_ID,
  :OLD.MANAGER_ID,:OLD.HIRE_DATE,
  :OLD.RELIEVED_DATE);
  COMMIT;
  END;
  

  Hope this helps you,

  Kind regards

  Jitendra

• Create the trigger for multiple users

  I am trying to create a trigger for a DDL event which gives an error for 2 users when they try to create a database object or a table.
  
  Here is my code. When ran it gives me the following error: "WARNING: trigger created with errors of complication."
  
  Any idea would be appreciated.
  
  Thank you!
  
  CREATE OR REPLACE TRIGGER trigger_before_create_object
  BEFORE YOU CREATE ON THE DATABASE
  
  BEGIN
  
  IF USER = USER OR "VPD_CLERK1" = "DBSEC_CLERK."
  THEN
  RAISE_APPLICATION_ERROR (' you do not have the privilege to create tables or other database objects.) Contact your administrator if you need the privilege. ") ;
  END IF;
  END;
  
  Published by: mkmety on April 20, 2013 12:10

  Welcome to the forum!

  Whenever you post provide your Oracle version 4-digit
  >
  I am trying to create a trigger for a DDL event which gives an error for 2 users when they try to create a database object or a table.

  Here is my code. When ran it gives me the following error: "WARNING: trigger created with errors of complication."

  Any idea would be appreciated.

  Thank you!
  >
  And to alert you to the need to view the errors you got. If you did you will see this:
  >
  PLS-00306: wrong number or types of arguments in the call to "RAISE_APPLICATION_ERROR.
  >
  Oracle cannot raise your exception if you:

  1. do not define an exception to throw
  2. don't tell Oracle how exception to throw

  See the section "Defining your own Error Messages (procedure RAISE_APPLICATION_ERROR)" in the doc of the PL/SQL language
  http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28370/errors.htm#i1871

  This article has examples that show how to raise your exceptions.

• How can I write the trigger for the global temporary Table

  Hi Grus,
  How can I write the trigger for the global temporary Table.
  
  I created the TWG with trigger using the script below.
  
  
  CREATE A GLOBAL_TEMP GLOBAL TEMPORARY TABLE
  (
  EMP_C_NAME VARCHAR2 (20 BYTE)
  )
  ON COMMIT PRESERVE ROWS;
  
  
  CREATE OR REPLACE TRIGGER TRI_GLOBAL_TEMP
  BEFORE DELETE, UPDATE OR INSERT
  ON GLOBAL_TEMP
  REFERRING AGAIN AS NINE OLD AND OLD
  FOR EACH LINE
  BEGIN
  INSERT INTO VALUES EMPNAME (: OLD.) EMP_C_NAME);
  END;
  /
  
  
  trigger was created successfully, but her would not insert EMPNAME Table...
  
  Please guide if mistaken or not? If not wanting to give a correct syntax with example
  
  
  Thanks in advance,
  Arun M M

  BEGIN
  INSERT INTO EMPNAME VALUES (:OLD.EMP_C_NAME);
  END;
  

  you are referencing old value in insert stmt.
  
  BEGIN
  INSERT INTO EMPNAME VALUES (:new.EMP_C_NAME);
  END;
  

  then run your app, it works very well...

  CREATE GLOBAL TEMPORARY TABLE GLOBAL_TEMP
  (
  EMP_C_NAME VARCHAR2(20 BYTE)
  )
  ON COMMIT PRESERVE ROWS;
  
  CREATE OR REPLACE TRIGGER TRI_GLOBAL_TEMP
  BEFORE DELETE OR UPDATE OR INSERT
  ON GLOBAL_TEMP
  REFERENCING NEW AS NEW OLD AS OLD
  FOR EACH ROW
  BEGIN
  dbms_output.put_line(:OLD.EMP_C_NAME||'yahoo');
  INSERT INTO EMPNAME VALUES (:new.EMP_C_NAME);
  dbms_output.put_line(:OLD.EMP_C_NAME);
  END;
  /
  
  create table EMPNAME as select * from GLOBAL_TEMP where 1=2
  
  insert into GLOBAL_TEMP values('fgfdgd');
  commit;
  select * from GLOBAL_TEMP;
  select * from EMPNAME;
  
  output:
  1 rows inserted
  commit succeeded.
  EMP_C_NAME
  --------------------
  fgfdgd               
  
  1 rows selected
  
  EMP_C_NAME
  --------------------
  fgfdgd               
  
  1 rows selected
  

  He got Arun

  Published by: OraclePLSQL on December 28, 2010 18:07

• I am looking for a component.

  I am looking for a component, a dropdownlist control with a scroll bar, which can be filled with the values of a list XML.

  Use a control ComboBox and xml as a DataProvider

• Support of Inline actionscript for custom component events

  Is it possible to support actionscript inline for custom component events?
  
  For example, let's say I have a custom component that distributes a refreshed event called. Is this possible via mxml to bind the event to actionscript inline? You can do this with components that come with Flex 3, but did not do with the events of custom component.
  
  Something like: < com:custom_component id = "cus1" refresh = "{Alert.show ("the refreshed component!") ;}}" "/ >

  You need create metadata for the event in order so that it can be accessed online, when you declare the custom component:

• How can simple trigger for verification of status update on the table... - I get upd sql then?

  Hi guys,.
  
  I need to do a temporary simple audit on all updates on a table.
  
  That's why I create a trigger for her...
  
  However, I need to capture the SQL statement to make the update as well... However I have no way to do it, because it is always replaced by a SQL code I run to get the SESSION ID...
  
  Here is the trigger...
  ----------------------
  
  create or replace
  alert_setting_trg relaxation
  before the update on user_alert_settings
  for each line
  declare
  number of v_sid;
  v_username varchar2 (100);
  v_osuser varchar2 (100);
  v_machine varchar2 (100);
  v_program varchar2 (100);
  v_module varchar2 (100);
  v_prevsqlid varchar2 (100);
  v_sqltext varchar2 (100);
  
  Start
  SELECT SYS_CONTEXT ('USERENV', 'SID')
  IN v_sid
  FROM DUAL;
  
  SELECT the username, osuser, machine, program, module, PREV_SQL_ID
  IN v_username, v_osuser, v_machine, v_program, v_module, v_prevsqlid
  SESSION $ v where SID = v_sid;
  
  SELECT sql_text
  IN v_sqltext
  V $ sqltext
  WHERE SQL_ID = v_prevsqlid;
  
  INSERT INTO alert_settings_log
  VALUES (sysdate, v_sid, v_username, v_osuser, v_machine, v_program, v_module, v_sqltext,: new.user_id,: new.service_grp,: new.alert_setting_id,: old.alert_active,: new.alert_active);
  
  end;
  
  
  Now the problem is that...
  the capture of SQL statement will always be
  
  SELECT SYS_CONTEXT ('USERENV', 'SID')
  IN v_sid
  FROM DUAL;
  
  
  and not the UPDATE table statement.
  
  1st quarter) I have to get the SID of the session before I could know what SQL it is running.
  
  However, once I get the SID, the SQL to UPDATE the SID is run changes the SQL that gets the SID.
  
  What can I do?
  
  Rgds,
  Noob

  Instead of to the request in three steps, do it in 1. Replace all three of your queries with something like:

  SELECT s.username, s.osuser, s.machine, s.program, s.module, q.sql_text
  INTO v_username, v_osuser, v_machine, v_program, v_module, v_sqltext
  FROM v$session s, v$sql_area q
  WHERE s.sid = SYS_CONTEXT('USERENV','SID') and
        s.prev_sql_id = q.sql_id
  

  John

• FRM-40735: trigger for INSERTION after raised unhandled exception ORA-25207

  Hello
  I am trying to create custom applications. In that when creating custom responsibility I get the following error
  FRM-40735: trigger for INSERTION after raised unhandled exception ORA-25207
  
  I know ORA-25207 is related to the activation of the queues, but how do I find out which queue this error is ponting at.
  
  File alertlog Checked, $APPLCSF / $APPLLOG found nothing.
  
  Any help is appreciated
  
  Concerning
  Taher

  PL see if the steps described in MOS Doc 211095.1 (11, 5 - AP: Frm-40735: trigger of sur-Commit not triggered managed Ora - 25207 Exception on APXPAWKB) can help.

  It is an odd error and should not occur when you create custom responsibilities. You have customizations/triggers/customizations enabled on the form of accountability?

  HTH
  Srini

• trigger for update field in a table with the sum of the fields to another table

  My experience in creation of triggers and pl/sql in general can be described in terms of oracle with the null value. I practiced by creating arrays and applications on my personal server at home to help me with some of my work related tasks. Right now I am creating a trigger which will, after insert, update, delete on the update of the table assignment_time_track the area of the time_spent on the table of assignments with the sum of the time_spent on the assignment_time_track table fields. I hope that run on the sentence it is clear to the people other than me. I tried this script on my own using the tool of creation of trigger for Oracle Database Express Edition, but I get the following error:
  
  Create a trigger failed, for the following reason:
  ORA-06552: PL/SQL: ORA-06553 finished Compilation unit analysis: PLS-320: the declaration of the type of the expression is incomplete or incorrect
  
  Here is my attempt to create the trigger on my own.
  
  create or replace trigger "ASSIGNMENT_TIME_TRACK_T1".
  AFTER
  INSERT or update or delete on 'ASSIGNMENT_TIME_TRACK '.
  for each line
  Start
  update assignments
  Set time_spent = (select sum (time_spent)
  of assignment_time_track
  where assignment_time_track.name = assignments.name);
  
  end;
  /
  
  
  If what I posted is not clear or more detail is needed, let me know and I will respond with a full description of tables and my goals for each table. Thanks in advance for any help. I also gladly accepts links to tutorials or lessons that explain how to do this kind of thing.
  
  Published by: bobonthenet on March 9, 2009 14:01

  I think I understand what you mean :)

  Rather than use a trigger to keep the master table (assignments) in sync with the time spent on the details, it would be much easier to use a query to do this, maybe creating a view.

  Something along the lines of

  SQL> create table assignments
    2  (id number primary key
    3  ,name varchar2(10)
    4  );
  
  Table created.
  
  SQL>
  SQL> create table assignment_time_tbl
    2  (id number primary key
    3  ,assid number references assignments
    4  ,time_spent number
    5  );
  
  Table created.
  
  SQL>
  SQL> insert into assignments
    2  select rownum
    3       , 'a'
    4    from all_objects
    5   where rownum < 5
    6  /
  
  4 rows created.
  
  SQL>
  SQL> insert into assignment_time_tbl
    2  select rownum
    3       , rownum
    4       , rownum * 3
    5    from all_objects
    6   where rownum < 5
    7  /
  
  4 rows created.
  
  SQL>
  SQL> commit;
  
  Commit complete.
  
  SQL>
  SQL>
  SQL> select a.id
    2       , a.name
    3       , (select sum (time_spent)
    4            from assignment_time_tbl
    5           where assid = a.id
    6         )
    7    from assignments a
    8  /
  
          ID NAME       (SELECTSUM(TIME_SPENT)FROMASSIGNMENT_TIME_TBLWHEREASSID=A.ID)
  ---------- ---------- -------------------------------------------------------------
           1 a                                                                      3
           2 a                                                                      6
           3 a                                                                      9
           4 a                                                                     12
  

• who is the best 4 db Trigger for auto-differentiels?

  Hello
  
  Who is the best 4 db Trigger for auto-incrementielle of an id ...?
  With the help of a sequence and the sequence of call in an insert...
  Or by using the following code:
  ----------------------------------------
  

  SELECT NVL(MAX (SCDEDULE_ID+1),0)
  INTO V_SCDEDULE_ID
  FROM INSP_DAILY_SCHEDULE ;
  EXCEPTION
  when NO_data_found then null;
  WHEN OTHERS then null;
  END;

  or both are the same thing... ?
  
  Pls advice me..... !
  
  Kind regards
  
  Abdetu...

  As already mentioned, you should definitely use sequences, because they are the only mechanism that works in multi user environments. Each user will receive a different schedule_id assigned, while the use of the nvl - max method two sessions when it is running at the same time will acquire the same schedule_id. You can of course lock the entire table to work around this problem, but which leads to questions of scalabilty. Sequences are also faster, as can be seen in the following example:

  SQL> create table insp_daily_schedule
    2  ( schedule_id number primary key
    3  , other_columns varchar2(100)
    4  )
    5  /
  
  Tabel is aangemaakt.
  
  SQL> create sequence myseq
    2  /
  
  Reeks is aangemaakt.
  
  SQL> create package schedule_api
    2  as
    3    procedure add_daily_schedule_nvlmax
    4    ( p_other_columns in insp_daily_schedule.other_columns%type
    5    );
    6    procedure add_daily_schedule_sequence
    7    ( p_other_columns in insp_daily_schedule.other_columns%type
    8    );
    9  end schedule_api;
   10  /
  
  Package is aangemaakt.
  
  SQL> create package body schedule_api
    2  as
    3    procedure add_daily_schedule_nvlmax
    4    ( p_other_columns in insp_daily_schedule.other_columns%type
    5    )
    6    is
    7      l_schedule_id insp_daily_schedule.schedule_id%type;
    8    begin
    9      select nvl(max(schedule_id),0)+1
   10        into l_schedule_id
   11        from insp_daily_schedule
   12      ;
   13      insert into insp_daily_schedule
   14      ( schedule_id
   15      , other_columns
   16      )
   17      values
   18      ( l_schedule_id
   19      , p_other_columns
   20      );
   21    end add_daily_schedule_nvlmax
   22    ;
   23    procedure add_daily_schedule_sequence
   24    ( p_other_columns in insp_daily_schedule.other_columns%type
   25    )
   26    is
   27    begin
   28      insert into insp_daily_schedule
   29      ( schedule_id
   30      , other_columns
   31      )
   32      values
   33      ( myseq.nextval
   34      , p_other_columns
   35      );
   36    end add_daily_schedule_sequence
   37    ;
   38  end schedule_api;
   39  /
  
  Package-body is aangemaakt.
  
  SQL> set timing on
  SQL> begin
    2    for i in 1..10000
    3    loop
    4      schedule_api.add_daily_schedule_sequence(lpad('*',100,'*'));
    5    end loop;
    6  end;
    7  /
  
  PL/SQL-procedure is geslaagd.
  
  Verstreken: 00:00:00.93
  SQL> /
  
  PL/SQL-procedure is geslaagd.
  
  Verstreken: 00:00:00.92
  SQL> /
  
  PL/SQL-procedure is geslaagd.
  
  Verstreken: 00:00:00.92
  SQL> begin
    2    for i in 1..10000
    3    loop
    4      schedule_api.add_daily_schedule_nvlmax(lpad('*',100,'*'));
    5    end loop;
    6  end;
    7  /
  
  PL/SQL-procedure is geslaagd.
  
  Verstreken: 00:00:01.32
  SQL> /
  
  PL/SQL-procedure is geslaagd.
  
  Verstreken: 00:00:01.68
  SQL> /
  
  PL/SQL-procedure is geslaagd.
  
  Verstreken: 00:00:01.32
  

  The only counter-argument that can be given for the nvl - max method, is that it is the independent database, while Oracle sequences are used by Oracle only as far as I know. But since independence database should never be a goal because it leads to poor applications and poor database design because it can only operate features that each database has, this argument is hardly any value.

  Kind regards
  Rob.