QuickVPN connected, but I can't do anything on the LAN ping
Hi all
I try to use QuickVPN to connect to my corporate network. Yesterday I was to the point where QuickVPN actually connected and I could connect to the router from inside IP. But I can't see, or ping all computers on the LAN to company. Manual of the router says '' customer QuickVPN may access only the default LAN hosts. ''. Are the computers of the default of the company LAN LAN hosts?
I added the router (RV220W) to the existing company LAN to test QuickVPN. The company LAN has a Small Business Server as a DHCP server and another router as the default gateway. The company LAN the subnet 192.168.1.0/24*, the cisco wan router has the subnet 192.168.103.0/24 and my VPN client is connected to a hotspot wifi with the same wan and LAN 192.168.3.0/24. The LAN of the cisco router address is 192.168.1.1.
* I know now, 192.168.1.0/24 is the worst possible choice for a net business, but I didn't when I installed the Small Business Server. I'll try to change it to something like 10.123.45.0/24 later.
Thanks in advance
Mike
Hello
You can reach a PC in the LAN of RV220, because the default gateway is not RV220.
This is what happens: the PC with fast VPN (for example IP: 192.168.103.10) is ping a PC with IP 192.168.1.10, via the VPN tunnel. Once the request arrives at the 192.168.1.10 PC, this PC sends the response to its default gateway (because don't have a direct connection to the 192.168.103.X network). If the default gateway is RV220, he'll know that the response should be returned via the VPN tunnel to the customer, but if it's another machine, it will just drop the package.
In this case this another router (default gateway) must be configured with a static route, saying that subnet 192.168.103.x has as default gateway - 192.168.1.1 (RV220).
As long as the IP address of the VPN machine fast is the same, it's ok. But if you move this PC to another local network, you will have again the problem.
So if you plan to change the LAN IP of the fast VPN machine, I recommend using instead the Shrew VPN, where you can configure virtual IP on the client, that does not need to change.
Kind regards
Bismuth
Tags: Cisco Support
Similar Questions
-
Can not do anything on the VLAN ping on 6248
Hello
I've spent a day and a half trying to solve this problem, but I'm not getting anywhere. Here is a breakdown of the test configuration database.
Port 1: Connected to the existing network (if I can get to the host ESXi from my PC)
: 3 my ESXi host is connected to this
Virtual machines are tag VLAN through port ESXi group properties.
All VLANS have 1 VM except VLAN 10, which has 2.
All the VLANS are IP address ending with 24 par.1 the subnet mask.
All virtual machines have the corresponding default gateway pointing to the IP of the VLAN (XXX1)
I am able to get the IP address of the DHCP server to different VLANS.Things that work:
From a virtual machine, I can ping to IP of any VLAN (so MV in VLAN 10 can ping IP of the VLAN 20)
The console, I can ping IP of any VLANThings that DON'T work:
The console, I cannot ping any computer virtual IP.
From a virtual machine, I can not ping any address (including the virtual machines in the same VLAN)Here is my config running:
! Current configuration:
! Description of the system "PowerConnect 6248, 3.3.7.3, VxWorks 6.5.
! 3.3.7.3 system software version
! Passage mode is configured as disabled
!
Configure
database of VLAN
VLAN 10,20,30,40,50,300
VLAN 10 1 routing
VLAN 20 2 routing
VLAN 30 3 routing
VLAN routing 40 4
VLAN 50 5 routing
VLAN routing 300 6
output
unicast SNTP client enable
customer survey SNTP 1024 timer
SNTP server 0.north - america.pool.ntp.org
clock timezone-7 minutes 0
battery
1 2 Memberoutput
IP 192.168.8.250 255.255.255.0
default IP gateway - 192.168.8.230
IP routing
IP helper-address 10.80.10.10 dhcp
interface vlan 10
name 'server '.
Routing
IP 10.80.10.1 255.255.255.0
output
interface vlan 20
name "printer - Switch."
Routing
IP 10.80.20.1 255.255.255.0
IP helper 10.80.10.10
output
interface vlan 30
name "Workstation".
Routing
IP 10.80.30.1 255.255.255.0
IP helper 10.80.10.10
output
interface vlan 40
name "phones".
Routing
IP 10.80.40.1 255.255.255.0
IP helper 10.80.10.10
output
interface vlan 50
name of the 'Camera '.
Routing
IP 10.80.50.1 255.255.255.0
IP helper 10.80.10.10
output
interface vlan 300
name "router".
Routing
IP address 192.168.1.250 255.255.255.0
output
user name 'root' password XXXXXXX level encrypted 15
l2relay DHCP
DHCP l2relay vlan 10,20,30,40,50
!
interface ethernet 1/g1
switchport mode general
output
!
interface ethernet 1/g2
switchport mode general
output
!
interface ethernet 1/g3
spanning tree portfast
switchport mode general
switchport general allowed vlan add 10,20,30,40 tag
output
outputLooking at the config on the switch, I can't predict whether the switch. The config is pretty basic, and the only way I guess whether the switch is if there were problems with the overall performance of the network. Love packages ignored, times of high ping, etc. Doing some research I found a few posts of blogs, KB and forum various with some things to look at what can help.
http://msmvps.com/blogs/netman66/archive/2010/03/25/VMware-vSphere-4-client-slow-to-load-fixed.aspx
http://www.v-front.de/2011/07/improve-your-vSphere-clients.html
http://hardforum.com/showthread.php?t=1698368
http://d1it.WordPress.com/2010/12/23/slow-vSphere-client/
See you soon
-
HP Deskjet 1050 all-in-one J410 series, I downloaded but I can 't print anything on the internet. He tellme to find the appropriate driver and I don't know how to find. The taskbar has no indication that I can "Print" which is on the monitor. I have a del Insperion 519 with Vista computer. Rating: 3.2 system type: 64-bit operating system. The printer will no print that I have imput myself on a CD or a floppy disk but Word material through the internet... Please Help... * address email is removed from the privacy * or 617-569-3778
If you are printing using the menu 'File', 'Print', in general tab under 'select printer' choose your printer, and then click Print.
If you are trying to print via the button "Print" in the toolbar, but it is not available, try the following:
Put the button "print" in the toolbar,
Do a right-click on the toolbar, click on 'Customize' (buttom more), click 'Add commands to delete' (buttom more), click on 'Print' under ' the available toolbar buttons: ", click on the button" add one-> ", click on the close button. You can also try the 'Reset' buttonDownload driver HP: http://www8.hp.com/us/en/support-drivers.html
Enter your name/number type of printer HP Deskjet 1050 all-in-one-J410a product or J410e. on the next page, select your operating system by clicking on the drop down arrow: Microsoft Windows Vista (64-bit), click on the button 'Next', the download will appear below. During the installation do not connect and turn on the printer to the computer until you are prompted to. -
VPN connects, cannot get to anything on the LAN
OK, what don't get me? My VPN connects OK with the Version of the Client 5.0.07.0290 VPN but I can't access anything on the 10.0.0.0/24 network.
Any thoughts? I should be able to ping the server 10.0.0.90 if it worked properly in my laptop while I'm on the VPN. Following configuration:
ASA Version 7.2 (4)
!
hostname XXXX
domain energy.com
activate jp28ZvYIS1PQVK6M encrypted password
UmzM9i7pSqpXEdTR encrypted passwd
names of
!
interface Vlan1
nameif inside
security-level 100
IP 10.0.0.9 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address 74.x.x.150 255.255.255.248
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone IS - 5
DNS server-group DefaultDNS
domain energy.com
access-list 101 extended allow ip 10.0.0.0 255.255.255.0 192.168.150.0 255.255.255.0
access-list sheep extended ip 10.0.0.0 allow 255.255.255.0 192.168.150.0 255.255.255.0
outside_in list extended access permit tcp any host 74.x.x.146 eq 35330
outside_in list extended access permit tcp any host 74.x.x.147 eq 10000
outside_in list extended access permit icmp any one
outside_in list extended access permit tcp any host 74.x.x.148 eq 990
outside_in list extended access permit udp any host 74.x.x.148 eq 900
outside_in list extended access permit tcp any host 74.x.x.148 4000-4099
access-list extended outside_in permit udp any host 4000-4099 74.x.x.148
outside_in list extended access permit udp any host 74.x.x.148 eq 990
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer of 100000
debug logging in buffered memory
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
IP local pool dhcppptp-192.168.150.1 - 192.168.150.20
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 524.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0 access-list sheep
NAT (inside) 1 10.0.0.0 255.255.255.0
NAT (inside) 1 0.0.0.0 0.0.0.0
public static 74.x.x.146 (Interior, exterior) 10.0.0.90 netmask 255.255.255.255
static (inside, outside) 74.x.x.147 10.0.0.91 netmask 255.255.255.255
public static 74.x.x.148 (Interior, exterior) 10.0.0.3 netmask 255.255.255.255
Access-group outside_in in external interface
Route outside 0.0.0.0 0.0.0.0 74.x.x.145 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
Enable http server
http 10.0.0.0 255.255.255.0 inside
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
Crypto dynamic-map cisco 1 transform-set RIGHT
dynamic dyn-map 20-isakmp ipsec crypto map Cisco
dyn-map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 1
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
Telnet 10.0.0.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
TFTP server inside 10.0.0.109 cpix.cfg
internal BEVPN group policy
BEVPN group policy attributes
Server DNS 10.0.0.4 value 10.0.0.1
VPN-idle-timeout 30
Split-tunnel-policy tunnelall
Split-tunnel-network-list value 101
maindomain.com value by default-field
disable authentication of the user
IPSec-attributes tunnel-group DefaultL2LGroup
pre-shared-key *.
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key *.
ISAKMP ikev1-user authentication no
tunnel-group BEVPN type ipsec-ra
attributes global-tunnel-group BEVPN
address-pool dhcppptp pool
Group Policy - by default-BEVPN
IPSec-attributes tunnel-group BEVPN
pre-shared-key *.
ISAKMP ikev1-user authentication no
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the preset_dns_map dns
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:b379566df0e7f5213ad2396676763859
: end
Hello
I don't see the NAT0 configuration more in this configuration
NAT (inside) 0 access-list sheep
You can also change the ACL of Split Tunnel
standard access list permits 10.0.0.0 SPLIT-TUNNEL 255.255.255.0
BEVPN group policy attributes
no value of split-tunnel-network-list 101
Split-tunnel-network-list value of SPLIT TUNNEL
You can also use the "show run" command that will generate a little less production
-Jouni
-
someone on this planet knows!
XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).Hello
I recommend that you search/post this question on the link below:
http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
b Eddie -
I have a good wireless connection, but I can't get my printer to print anything
I have a good wireless connection, but I can't get my printer to print anything, but that's a story.
Can someone tell me what could be wrong?Original title: default printer:Hello
1. What do you speak?2. do you get an error message?
3 did you changes to the computer before the show?
4. What is the brand and model of the printer? What is a wireless printer?
5. have you tried to install the printer drivers?
Perform the steps mentioned in the article:Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-WindowsI suggest you provide more information about the issue so that we can better help you.See also:I hope this helps. -
I did an extra e-mail for my partner account. We read emails in our two accounts when I am connected, but she can't read his email, if it is logged in and of itself. How can we make accessible account directly for her?
deleted
-
Qosmio G10-166 - the cursor blink, but I can't do anything
I received a G10-166 with a broken power connector. The laptop had no disks or a battery, I made a temporary solution and the portable lights only problem is that after the load screen where its Qosmio, then said to the screen where the icons are the following has letters everywhere. I can see the cursor blinking, but I can't do anything with it.
I tried to access the page of the BIOS pressing F1 but nothing just this screen with the strange letters on it. Also I don't know the history of the laptop so any ideas what is wrong I want to get the job of the laptop?
Hello
You can access the BIOS if you press ESC I n know why you try F1?
You have installed a new HARD drive now? If so, you should check if the HARD drive is recognized correctly in the BIOS. If so, you can start with the installation of the driver because the new hard drives are empty then the cursor blinks and nothing happens.
Simplest is that you use the Toshiba recovery disc because it contains an image of the settings from the factory with all the drivers and tools. Just follow the instructions of scree and Windows will be reinstalled.
Alternative, you can also take a Microsoft Windows disk, but you will need to download and install all the drivers step by step. -
WiFi is connected but I can't connect to the net, what to do?
WiFi is connected but I can't connect to the net, what to do?
Hi Torrespa,
1. what happens when you try to connect to the internet?
2. were you able to use the Wi - Fi connection earlier?
3. what brand & model of network card?
You can follow this link & check if the problem persists:
How to fix wireless network connections in Windows XP Service Pack 2?
Reference: Wired and wireless in Windows network connection problemsTo set up automatic wireless network configuration
Hope the helps of information.
-
My laptop connects is more to the internet, either hard wired or wireless. When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before. My other computer has service very well (or I wouldn't send this message) I checked everything, what to do?
original title: internet connection.Hi vonhatten,
- Did you the latest changes on the computer?
- You receive an error message when you try to connect to the internet?
- You have security software installed on the computer?
Refer to the article below and try the steps mentioned, check if it helps.
In Windows network connection issues
-
DJ 3050 has j611 says connected but offline, can't print why
DJ 3050 has j611 says connected but offline, can't print why
lehmankm wrote:
light blue (flashing) wireless...
Ah... There's the data I needed. Wireless light flashing means that you are not connected to your routers SSID. You need to connect the printer to your routers SSID with password.
-
I can import the video and put it in the format of movie, but I don't see anything in the editing box
Try:
FAQ: Why no audio or video will not at the track where I let down?
-
Hey, I just bought an Adobe Creative Cloud Abo, but I can not download anything
Hey, I just bought an Adobe Creative Cloud Abo but I can't download anything.
I'm using Firefow browser on Windows PC. Whenever I have klick on 'Download' there is an Error Message called: "there is a problem, try later or call the Customur Service."
Please help me!Hi,
Please try to download the application directly via the link below:
Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools
Kind regards
Sheena
-
Every day you ask me to controll my payment records. But I can't find anything wrong. I don't know what to do?
vska
Hello
According to the guidelines of your account, your billing date is 2nd of each month, we are unable to capture the payment for seven from your card on file.
Please go to your bank if you think that this is happening because of the error or update your new card with the instructions here - https://helpx.adobe.com/creative-cloud/help/manage-cc-individual-membership.html
^ Ani
-
I get a notice that my subscription will expire soon. I click on "Subscription manager" and go to my account, but I can't find ANYTHING on how to pay renew my subscription. Where is the membership Manager?
Hi Ruth,.
Please see manage your creative cloud membership
Hope that helps!
Kind regards
Sheena
Maybe you are looking for
-
I created a folder of compilation of songs of Christmas favorite on my pc, the problem I have is that when I try to drag the folder in my folder music in itunes so I can sync with my Iphone 4 it copies all of the individual tracks and not the actual
-
How can I prevent some Windows Update download updates?
How can I prevent some Windows Update download updates? I continue to receive updates for Microsoft Office, but I do not have Microsoft Office installed on the computer, on that download updates. I tried to hide updates, but within 30 seconds they d
-
Why my e drive now say stick of memory instead of the cd/dvd drive?
I used to be able to play CDs and DVDs on my e drive but the label changed suddenly 'e reader memory stick' and it is ' has no stick of memory missing in the usb port. How can I get my cd / dvd drive back? It seems to be missing. If you can tell me
-
Hello I try to run SmsDemo. I imported the sample SmsDemo and I have the server, account component. I run the server component, but the messages that I send to the application of SmsDemo have no effect - I don't see anything happen to the account app
-
My error in the event log: application DCOM error
The error message reads as follows; Machine default permission settings grant Local Activation permission for the application server COM with the CLSID {9BA05972-F6A8-11CF-A442-00A0C90A8F39} and APPID {9BA05972-F6A8-11CF-A442-00A0C90A8F39} the user S