"Partition for ' with a variable binding

Similar Questions

• PB to update a partition replicated with substitution variables

  Hi all
  
  I have the following problem with the partition replicated using substitution variables:
  
  I would like to create a partition that is replicated using substitution variables: & CurrPeriod, & CurrWeek, & CurrYear. The purpose of this should be able to copy data from application SourceApp to TargetApp, by changing the variables of subst.
  
  The script that I created is:
  
  UserAdmin connection identified by password on EssbServer
  
  create or replace replication partition SourceApp.SourceDb
  area '& Cons_Year, & Cons_Scenario, & Cons_Version, "MP_TF_542" ' sourcearea1
  at TargetApp.TargetDb
  area '& Cons_Year, & Cons_Scenario, & Cons_Version, "PL_R450100" ' targetarea1
  mapped to targetarea1 ("' MP_TF_542" ') to ("'PL_R450100" ');
  
  
  Refresh SourceApp replicated partition. SourceDb to TargetApp. TargetDb to EssbServer all the data;
  
  Everything is fine. I see new data in TargetApp. Then I try to change the variable substitution and see new data (the last value of Cons_Year was FY09):
  
  ALTER system set variable FY10 Cons_Year;
  Refresh SourceApp replicated partition. SourceDb to TargetApp. TargetDb to EssbServer all the data;
  
  But when I change the value of the variable substitution - ordered that's happened, I don't see new data in TargetApp. Proxy changed the system, but did not score.
  
  
  Essbase 11.1.1.2
  
  Someone can help me.

  ALTER system set variable FY10 Cons_Year;
  Refresh SourceApp replicated partition. SourceDb to TargetApp. TargetDb to EssbServer all the data;

  Between these two commands insert two other commands in your MaxL script.

  modify the application of unloading system >;
  modify the application of the system of load >;

• Element of the page to send: need for clarification on variable bind and online help

  Hello
  
  For dynamic actions "Code from PL/SQL Execute", online help for the PL/SQL Code is as below:
  
  Specify a single anonymous PL/SQL block, which will be executed on the server to run.
  
  You can reference another page or link elements of the application from your application here by using syntax (for example: P1_MY_ITEM), but if you don't you need to include in the "Items to submit Page" attribute also.
  
  For example:
  
  Start
  
  setCommission(:P1_SAL,:P1_JOB);
  
  end;
  
  In this example, you must also include P1_SAL, P1_JOB in the "Items to submit Page" attribute.
  
  When I read this I understand that I must include in the 'Page of Items to send' attribute if I want to use bind syntax for them. In fact, I include in the "Elements of Page to submit" attribute if I can submit their values on the server and use this new value in the PL/SQL Code. If I want to use are already in session and I want to use these values, but not the new values (updated on the screen, for example), I don't have to submit to the server and I can use the bind syntax to get values that are already in session state.
  
  It was perhaps obvious, but it wasn't for me before I did a few tests with the attribute "Page of Items to submit". I don't know if I'm clear. English is not my mother tongue.
  
  Could someone confirm or not the behavior I described?
  Perhaps the online help could be updated to be more obvious if what I described above is true.
  
  Thank you

  Hello

  Your interpretation is correct. And you can use the old values in the syntax of the bind variables, provided that you have not changed the in your PL/SQL.

  Glance in this way, when a page is loaded from an HTML document is created in the browser that reflects the State of session maintained on the server. But at the time wherever the page is loaded, the two are completely separate and can be manipulated independently of eachother. JS and dynamic Actions using JS work only on the DOM HTML template while Ajax and the PL/SQL work on the Session State on the server.
  So when the page is be displayed two, HTML and session state, can be completely different depending on how you handled the.

  The DOM HTML template and Session state again get synchronized (new values recorded or scrapped) in the treatment of the consignment and the State resulting is again used to render him refresh / reloaded page.

  Kind regards

• Loop for with a variable counter in xquery in OSB

  I have xml. I compare the value of the PRIMARYID field in each node, and if it's the same, it should be updated ClaimID field with other even value, it should not get updated. Can someone tell me how to do this in OSB. Thank you.

  < InputParameters >

  < choice >

  < > 12 ClaimID < / ClaimID >

  < FACILITYID > 123456 < / FACILITYID >

  < > 1234 PRIMARYID < / PRIMARYID >

  < / choice >

  < choice >

  < ClaimID > 13 < / ClaimID >

  < FACILITYID > 123456 < / FACILITYID >

  < > 1234 PRIMARYID < / PRIMARYID >

  < / choice >

  < choice >

  < > 14 ClaimID < / ClaimID >

  < FACILITYID > 123456 < / FACILITYID >

  < > 2345 PRIMARYID < / PRIMARYID >

  < / choice >

  < choice >

  < > 15 ClaimID < / ClaimID >

  < FACILITYID > 123456 < / FACILITYID >

  < > 2345 PRIMARYID < / PRIMARYID >

  < / choice >

  < / InputParameters (InputParameters) >

  Something like this might work:

  Let the $input: =.

  12

  123456

  1234

  13

  123456

  1234

  14

  123456

  2345

  15

  123456

  2345

  return

  {

  for $choice in the $input / choice

  Let $withSamePrimaryID: = the $input / choice [PRIMARYID eq $choice/PRIMARYID]

  Let $claimID: = $withSamePrimaryID [1] / ClaimID

  return

  {$claimID} {$choice/FACILITYID} {$choice/PRIMARYID}

  }

• What is wrong with that variable binding.

  I get a bad bind variable error. I don't know what is wrong here.

  FUNCTION DisturbrLoops(i_currTerm IN NUMBER,
                            i_Termoutofloop IN Merc.T_NUMLIST,
                            i_currentTermonloop IN Merc.T_NUMLIST)  
                            RETURN NUMBER is
  v_sql        VARCHAR2(1000);
  cntLoops NUMBER;
  BEGIN
  
    BEGIN
     
    
    select count(distinct assoc1.loopid)
        from ndw_segment                  ns1,
           ndw_loop_segment_association assoc1,
           ndw_loop_segment_association assoc2,
           ndw_segment                  ns2
      where ns1.termsysid = :i_currTerm
       and ns1.segment_id = assoc1.segment_id          
       and assoc1.loopid = assoc2.loopid
       and assoc2.segment_id = ns2.segment_id
       and ns2.termsysid in
           (SELECT * FROM TABLE(CAST(:i_Termoutofloop AS Merc.T_NUMLIST)))
       and ns2.termsysid NOT in /*(1,2,3,4)*/
          (SELECT *
              FROM TABLE(CAST(:i_currentTermonloop AS Merc.T_NUMLIST)));
             
             
              
                   
      EXECUTE IMMEDIATE v_sql
              BULK COLLECT INTO cntLoops  
              USING i_currTerm ,i_Termoutofloop ,i_currentTermonloop;
    
  /*  dbms_output.put_line(v_Termoutofloop.count);*/
    
    EXCEPTION
      WHEN OTHERS THEN
       -- catch all errors. what to do. 
       dbms_output.put_line( SQLERRM || ' ' || SQLCODE);
          
      null;
       
    END;
  return cntLoops ;
  
  
  END DisturbrLoops

  Published by: user8798946 on September 14, 2009 01:45

  (1) remove the hider exception (Manager)
  (2) v_sql is null, then the immediate execution attempts to execute NULL...

• The value of variable binding VO on page load by program

  Hello everyone!

  I use JDeveloper version 11.1.2.3.0

  I am currently trying to get the filtered data to a VO, based on a WHERE clause with a variable binding. This process must be done on the loading of the page. I have set this variable for liaison with the id of the logged in user (the part to get this id is already reached and used somewhere else). My current approach is to define a bean managed with scope pageFlow. Inside of this, I have a method in which I get the id and I put it as parameter. The code snippet:

        BindingContainer bindings = getBindings();
          OperationBinding operationBinding = bindings.getOperationBinding("getUserIdFromUsername"); //getUserIdFromUsername is a method defined in the AppModule and exposed in the client interface
         operationBinding.getParamsMap().put("username", getUserName());
        Object userID = operationBinding.execute();
          setUserId(Integer.parseInt(userID.toString()));
         System.out.println("THE USER ID IS: "+getUserId());
         BindingContainer bindings2 = getBindings();
         OperationBinding operationBinding2 = bindings.getOperationBinding("ExecuteWithParams");  // i've dragged and dropped the ExecuteWithParams operation into the page
         operationBinding2.getParamsMap().put("userId", getUserId());  // userId is the bind variable which i'm talking about
          Object result = operationBinding2.execute();
  
  
  

  Then I call this method on BeforePhase in the view of the page. It works, I get the filtered data and the println shows me the correct ID. The problem is that whenever I select a row in the table showing the data, the page seems to reload and it always reload the selection at the forefront.

  What I am doing wrong? Maybe this isn't the right approach, that I saw a few other posts on this topic, but they are not very clear to me.

  Please advice

  OK, that's what I did. I created the method to set the value of the variable to bind to the query of the VO in the AppModule instead of inside the bean (this method also runs the query) and client presentation to the interface. After I have created the method call in the section of links the pagedef (where he gets the value of the id of the bean in the original post), and followed Cvele_new_account suggestion, calling the method as follows:

  RefreshCondition = "#{! requestContext.postback and empty bindings.exceptionList}" / >

  Thank you for the help guys!

• Reg: Cardinality Feedback for queries with variable bind

  Hi all

  One of my query (having no bind variables) takes a lot of time (10 minutes) to run for the second run.

  I came to know that its due to the feedback of the cardinality.

  I disabled _optimer_use_feedback for help and the query has been run within 2 seconds.

  If I disable _optimizer_use_feedback at the instance level, is there a problem for queries with variable bind?

  > Sorry! I'm not suppose to disclose the NAMES OF THE TABLES

  OK, no problem and I take this restriction as a chance to learn what is cardinality comments, and similar expressions.  Now, since you can't explain post program for our help, I would try to explain what is comments of cardinality and similar expressions: (since you did not mention Oracle version, so I guess it's 11.2.0.1)

  In the Oracle 11.2.0.1 database some SQL statements returns significantly different lines i.e. for some SQL statements earlier execution plan there are has 100 lines by optimizer in the first plan of execution and, where the same SQL statement executed, based optimizer 1000 lines.  This happens because of several cursors for child for a single SQL statement and change bind peeking, collection of statistics, characteristic of re-optimizing 11.2.0.1, permission to referenced objects, ACS (Adaptive Cursor sharing) etc.  The preaching of changes to lines due to above reasons as well regarding also the SQL statements that are not contains the variable i.e. AKA vibration cardinality of liaison function.

  I will highly recommend to read other links below:

  Cardinality feedback | Notebook of the Oracle

  http://www.centrexcc.com/tuning%20by%20Cardinality%20Feedback.ppt.PDF

  https://blogs.Oracle.com/optimizer/entry/cardinality_feedback

  Concerning

  Girish Sharma

• Cursors for parent and child, bind variable and library cache

  I was going through the documentation to understand the difference between the parent and the child cursors. Surprisingly, there's not too much help for this. I was able to collect the following information about this
  
  For each statement SQL cache library contains a cursor "parent" for the text of the SQL statement. The parent cursor is composed of a "handle" that can be searched by the hash value via the library cache hash table and an «object' which contains pointers to each of its «child» cursors Each cursor of the child is also composed of a handle and an object. The child object is composed of two segments numbered from 0 to 6. Lot 0 contains all the credentials for a particular version of the SQL statement and lot 6 contains the execution plan. This distinction between parent and child cursors is maintained even when there is only one version of each SQL statement.
  
  Lets say that 2 LMD were fired with the same set of variables bind (names of variables were same but differed from the value.) The only difference between the 2 LMD was the value of the variable binding) and under the same conditions of load.
  
  These DML 2 would be a sliders 2 children of one parent only cursors.
  
  Please tell me detailed documentation on the subject, so my question is too elementary
  
  Kind regards
  Vishal

  I'm not sure how useful jumping in stuff like bunch 0 and 6 bunch is in terms of understanding what is a parent and what is a child cursor.
  This quote seems to come from Steve Adams - http://www.ixora.com.au/q+a/0104/19005414.htm
  It's a good idea to cite your references.

  I'll give it a go.

  A cursor is a lot of information stored in memory on a SQL statement.

  The basic information for a parent cursor is the text of the SQL statement - exact matches of the statement can only share the parent cursor.

  The cursor of the child is really on the implementation plan specific for a statement and the different settings and parameters that caused this plan to be generated.

  There are a whole bunch of reasons why the executions of the same SQL statement may or may not reuse the existing child cursors.

  In your example 2 statements that differ by the variable binding are likely to lead to different children, although there are factors that can lead to lie different values, do not share the same children among whom for example, the length of the dregs, Adaptive setting cursor_sharing = similar and histograms, or new features like cursor sharing (on subsequent runs of renowned sql running suboptimal initially).

  It might be useful to see V$ SQL_SHARED_CURSOR. This shows the disparities that cause children to not be shared. There are more than 60 columns in this view which gives an indication of the number of factors that can influence.
  http://download.Oracle.com/docs/CD/E11882_01/server.112/e17110/dynviews_3059.htm#REFRN30254

  You might want to look here the criteria for sharing SQL:
  http://download.Oracle.com/docs/CD/E11882_01/server.112/e16638/memory.htm#i40017

  Away from the main documentation, perhaps some of the writings of the optimizer Development Group could help?
  http://blogs.Oracle.com/mt/mt-search.cgi?blog_id=3361&tag=cursor%20sharing&limit=20

  Christian Antognini described this area very well in the "Oracle Performance Troubleshooting Guide".

  Published by: Dom Brooks on February 24, 2011 16:45

• OPEN-for not friendly with nvarchar2 variable

  OPEN - for not friendly with nvarchar2 variable - this means that if you want to tell to execute a dynamic sql code with Unicode character, you are out of luck.
  
  A way around this problem?
  
  Thank you

  1. This will determine your characterset (nls_characterset)

  select * from nls_database_parameters;
  

  2. dynamic sql string creation is good without using NVARCHAR2.
  The data type of the string passed to the SQL in OPEN FORUM is not related to the data types of the data that will be retrieved.

  Edited by: dombrooks may 6, 2009 10:47

• Variable binding defined in LOV

  Hi, I use JDev 11.1.1.7

  I have a VO (FundingNameVO) which takes in bind variable.

  FundingNameVO is used as LOV in an another VO (ProjectVO) for a FundingName attribute.

  ProjectVO also has an attribute FundingSource has also a LOV.

  When FundingSource is selected, the value must be sent to the liaison FundingNameVO variable to determine the LOV to display for FundingName,

  How to pass the FundingSource value to the variable of FundingNameVO binding?

  Thank you.

  Hello

  If the value of the variable binding from attribute ProjectVO follow these steps:

  in tab display accessor is ProjectVO, you have added an instance of FundingNameVO, click the view accessor on Edition, then in the open Panel, you see the bind variable, set the value of the variable binding with the good ProjectVO attribute name

  If not check this: http://www.jobinesh.com/2011/03/initializing-bind-variables-in-query.html

  Kind regards

  Habib

• How many times can I use a variable binding in a query of the VO?

  Is it possible that I can use a variable binding in a query of VO just once?

  I test a query that keeps throwing the Houston-27122 error by pressing the application module tester. I tried to limit the problem to the simplest possible case, and it seems that the error is caused by the fact that I use the same variable bind two or more times.

  When the query looks like this:

  

  I have run, enter 'x' and it returns me the result.

  When I change to:

  

  I have run, enter the value

  

  and immediately get the error

  

  The same thing in sqlplus runs without problem:

  

  My version of JDev is build JDEVADF_11.1.1.9.0_GENERIC_150314.0718.6673

  Please, advise.

  P. S. where can I find documentation queries are supported in your? In particular, I'm interested if I can use WITH the clause. There seems to be some confusion on this matter (see, for example, Oracle SQL WITH clause support - JDeveloper and ADF)

  Thank you.

  It depends on:

  Open your VO in JDev and go the the query page.

  In the lower part, there is a drop down 'link type', it is usually set to "JDBC-positional. In this case, you will need to provide the bind value for each occurrence of the variable binding separately.

  You could change that to "named" (don't remember the exact name). But beware, this will also affect all relatioships master retail to others your. I think that this is not a good idea to change the style of binding to a single VO.

  Good bye

  DPT

• How not to display variable binding in the query ADF search panel?

  Hello, I use JDeveloper 11.1.2.3.0.

  I have a variable binding in my VO, (* required) that I use in the sql query. I put the value of this variable to link through the groovy expression so I don't have to manually put through my page. It works fine but the problem is that it appears in the query ADF Panel that I created in my page. To do this, I created a ViewCriteria and I've specified to display only 3 (other) fields for the simple search. Apart from the selected 3 variable bind shows here again because its value is set. I tried to remove the ' * required ' of the variable binding in the original Version, but in this case I have problems with my sql query.

  Does anyone know how this variable is not to display in the Panel request ADF?

  Thank you

  Has tried to define the binding to bee hidden variable?

  Controll tips, hint of display = hide

• Execution plan will change if I use the variable binding instead of the literal value?

  Hi guys,.
  
  Suppose I have a select "... Of... WHERE ID = 2 and... "if I go to use the variable binding instead of the literal value 2," SELECT... " Of... WHERE ID =: p_id and... ", the execution plan change?
  I test multiple statements, the plan does not change, but I don't know if it would even as well as in some other cases.
  Someone at - it ideas?
  
  Thank you very much.

  Anneso wrote:
  Hi, sorry for the unclear post, it's 11 GR 2.

  As Sybrand already mentioned, there are a lot of change that came in the implementation of the bind variable in some versions of Oracle db. Since you're on 112, it is still true with the introduction of Adaptive Cursor Sharing . Please have a read on it since the post below written by the development of Oracle optimizer group.
  http://blogs.Oracle.com/optimizer/entry/why_are_there_more_cursors_in_11g_for_my_query_containing_bind_variables_1

  Aman...

• Display Variable binding object, query, (Bean.attribute) HOW?

  Hi, I use an attribute of bean as a Bind Variable in a query to a display object.
  I have the following bean:
  

  package model;
  
  public class FalseBPM {//Simulate a BPM payload
      private String idDocIPM;
  
      public FalseBPM() {
          idDocIPM="5.IPM_016801";
      }
  
      public String getIdDocIPM() {
          return idDocIPM;
      }
  
      public void setIdDocIPM(String idDocIPM) {
          this.idDocIPM = idDocIPM;
      }
  }

  In a fragment of web page, I have an af:table of the DB (by datacontrol). It is necessary that the table load only the lines with the idDocIPM in his ID_DISTRIBUTION column. I did this:
  In my view, object-> query:

  SELECT IpmDistributionManual.ID_DISTRIBUTION, 
         IpmDistribucionManual.ID_BUSINESS, 
         IpmDistribucionManual.ID_CHANNEL, 
         IpmDistribucionManual.ID_ENTITY, 
         IpmDistribucionManual.VALUE
  FROM IPM_DISTRIBUTION_MANUAL IpmDistributionManual
  WHERE IpmDistributionManual.ID_DISTRIBUTION=:ID 

  In my display-> query object: - > variable binding:

  <Variable
      Name="ID"
      Kind="where"
      Type="java.lang.String"
      DefaultValue="#{falseBPM.idDocIPM}"/> //But I get an error in Literal or in Expression mode.

  How can I do this?
  
  Thanks in advance.
  
  Published by: Sarah on 28/10/2011 07:41

  Sarah,

  In your workflow, drag and drop the action 'run with the settings' for your view object (it is in the range of data control) on the workflow as a method call activity. Bind the parameter to the value of bean with EL (that you have tried to do in the VO itself - note that you can not use EL in the template like this project). Then, make sure the method call is wired to the top to run before your activity in the workflow view.

  John

• How to use a variable binding in an IN clause

  I'm trying to use a variable binding in an IN clause where the column is a type varchar2. Something like:
  

  select *
  from test
  where test_column in (:bindVariable)

  I tried the assignment of channels bind variable separated by commas (for example, test, test, test) and separated by commas strings with quotation marks (for example. 'test', 'test', 'test'). None of these work. Anyone know the correct way to do this?
  
  Thanks in advance.

  http://tkyte.blogspot.com/2006/06/varying-in-lists.html

  Presents many options.