Partition on the clarification of required list

Similar Questions

• External hard drive is not recognized and the Table to Partition GUID (GPT) partitioning scheme has message is required (-69773)

  Hello!

  I have an external HD that has been unplugued without eject by mistake. Since then, the HD is not recognized by the finder or disk utility.

  When I list the disk in the Terminal, the drive is listed.

  But when I tried to check or repair, a message appears: "failed to check this disc: a Partition GUID (GPT) partitioning schΘma Table is required (-69773).

  I can access the files using programs such as Seagate File Recovery, but I want to extract data and repair the disk without using 3rd party software.

  Is this possible?

  If you have access to the files - a possibility would be to get the files off the disk and then reformat using disk utility

• During the installation process of 6 of Lightroom, I get a box that says: Windows Vista not supported.  I have Windows 7 with Service Pak1. I meet all the other requirements listed.

  During the installation process of 6 Lightroom, I get a box that says 'Windows Vista not supported'.  I have Windows 7 with Service Pak 1.  I meet all the other requirements listed.  Any ideas?

  Hi Chuck,

  You can check out the link below.

  trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

  Hope this will help you.

  Kind regards

  Hervé Khare

• Need to create the Partition in the history table

  Hello

  I have an audit table that stores the data for the last 8 years in it and the customer wants to retain the data for the last 8 years. Now as adding data to this table is increasing, there is a delay in execution of report which are acquired by querying on this table.

  Basically, they go a from date and to date. Then these date are compared with two columns of dates in the table. The condition of the query will be as below

  TRUNC (NVL (DATE1, DATE2)) > = TRUNC (TO_DATE (?, ' dd/mm/yyyy ""))

  AND TRUNC (NVL (DATE1, DATE2)) < = TRUNC (TO_DATE (?, ' dd/mm/yyyy ""))

  Users can query for any date range.

  I am thinking of creating a Partition of the range on this table for each month during the 8 years of data. Please suggest on the question of whether I should use partition interval range to make it more effective. And would also create an Index on this partition for the above two day columns.

  12 (months) SO * 8 (years) = 98 would be created partitions. This will not overload the schema of database/Tablespace? Y at - it another effective way to set the table.

  Please suggest and let me know for any clarification.

  There are 2 approaches (but not limited to 2) to create the Partition on an existing table:

  Note: There is no ALTER TABLE statement to convert a heap table to a partitioned table.

  1. create a temporary Partitioned table with the same types of data in the column. Take a dump of the original table (HEAP) export and import the dump into the newly created partitioned intermediate table. After checking the data file the original and rename the interim even as the original table.

  2 using the package Oracle DBMS_REDEFINITION automates the steps above from said (not exactly the same steps, however) and its done online - which means there is no required downtime, the original table may undergo DML operations during this process of redefinition. View partitioning of a table online with DBMS_REDEFINITION | Oracle instructor

  According to my understanding if let us know as a partition interval then in April if there is an inserted record then it will create a new partition for the month of April will be of value less than 30 April 2014 "and all other documents created in April will pass under it"

  Yes, it's a feature of 11g, which Oracle manages adding partitions as needed. In earlier versions DBA can add partitions manually from time to time. Reference www.gavinsoorma.com/2009/09/11g-interval-partitioning/

  Here the reason for check the sent_out_datetime NVL will be NULL for few records, so in this case we want to get the records for dates of mapping them to received_datetime

  In addition, try to replace the NVL with COALESCE and test it. This would help improve performance.

• The Bank site requires Java and they say that you no longer support it.

  The Bank site requires Java and they say that you no longer support it. Now, I have to use IE which I really dislike.

  How about you to reconsider your decision in the light of the inconvenience it has caused to your users?

  Your System details list shows the Java plugin.

  • Next-generation Java plug-in 11.45.2 for Mozilla browsers

  It is not the latest version of Java and can be blocked by Firefox.

  You can find the latest version of Java 32 bits for Firefox here:

  • http://www.Oracle.com/technetwork/Java/javase/downloads/index.html

• App store watch available but fails with the message that requires version 10.10

  I've updated worm 10.11.2. in the last 24 hours is then went to the App Store and update all applications.

  My Alerts always show an available update and when I go to the store it shows 'Apple Configurator'. Now when I try to update I get the message "we could complete your update. This update requires OS X version 10.10. »

  How to clear is that both my alerts and the store?

  (I found earlier but nothing since 2012 messages, and I want to be sure that it is always topical).

  I did find 2 previous conversations and want to ensure that this solution is still topical.

  App Store displays the available updates, but no applications update

  update the iMac App Store list 1 avaialable

  Open a search window by pressing Command-F key combination in the Finder. Select the Mac as the scope of research and the research of the app (s) in question by name. Delete all obsolete copies that you find.

• Problem loading my BootCamp Partition after the partitioning of the disk again

  Hello

  I have a problem that I can't find everywhere are talking about here. Everything worked well. My BootCamp partition ran out of space. I wanted to increase the size of the partition, because I really have a lot of space on the Mac side.

  I ended up searching and following the procedure here:

  https://discussions.Apple.com/message/24377993#24377993

  "1) back up all your files (optional, but highly recommended)."

  (2) using the disk utility OSX resize MacintoshHD partition unallocated space leaving as much as you need to add to the bootcamp partition.

  (3) set the Bootcamp startup disk and restart the mac.

  (4) in Bootcamp with Windows running launch Mini Partition tool and select the bootcamp partition.

  (5) choose the option "expand" to extend the partition using all unallocated space.

  (6) the program prompt restart you the mac to apply the task, the cause is not possible while the partition is mounted and windows running.

  7-restart the mac and then automatically Mini Partition tool will do the job a form of "graphics like msdos. »

  I'm in step 3, and that's when I started to have a problem. I resized my Mac partition to have about 100 less GB. Did step number 3, but I got this black screen that says something along the lines of "bootable device found - no. Insert the diskette and press any key any." You know, the message that is displayed when the software that allows the system to boot is not found.

  I had to restart, and then press and hold the option key. It's weird. My Mac partition looks great, but the BootCamp partition isn't here. I loaded the side Mac upward, and I can still see my Bootcamp partition in the finder window. I can go in, see all the files and everything. I always choose Windows as my boot target drive. It just won't load.

  How can I fix?

  1 Please take the Mini tool. It's a total disaster. Should be prohibited on Macs.

  2 Please after the release of the following OSX Terminal commands. Do not change the disk partitioning any further.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• with a big hd, 1.5 to, it would be preferable to have a c small partition for the system

  with a big hd, 1.5 to, it would be preferable to have a small 1 to partion the system, I was advised to go and the other, I do not know which one to choose, I would prefer 1 c drive with all the system and data together.

  I remember with windows 3 it was a good idea to have a small c drive, but I thought we are further down the road, but I'd like to help appraiate

  Windows 7 works best when it is installed on a single partition with the programs installed on the same partition.  More a partition requires additional seek time and results in poor performance.

• How can add you a program that was not listed in the Add/Remove Programs list?

  I tried to remove a program from your laptop using Add/Remove software. He said the software appear to no longer be installed and asked me if I wanted to remove it from the list. I said yes and then discovered that the program is still there, but on another logical partition. How can I get this program show up on top of the Add/Remove software list?

  Reinstall it.

• Windows Vista folder size is 32 GB. How adjust us that to the 15 GB required for Vista installation?

  I have windows vista ultimate 64-bit installed on a 50 GB partition.  The windows folder contains 34.8 GB, about 18 GB is exhausted by the winsxs folder.  I read a lot of the other threads on this topic, but have not yet find a sensible answer.  Buy a bigger hard drive is not an option, not because of costs but because of the weather, the amount of time I have to reload all the software and settings is unacceptable, especially if I have now every two months.  So is there a solution to this problem or not?  Windows 7 suffers the same?  I have to downgrade to XP?  Can I use the same number to install the 64-bit version of XP?

  Hi Luisbon,

  Thank you for visiting Forums answers to Microsoft Windows.

  Given that the installation of the operating system files are present in the Windows folder, it will occupy certain amount of space. The WinSxS folder contains the copy of the file system and other components. If you install many applications for Vista, WinSXS folder may be great because it will require to store multiple copies of the dll to enable multiple applications to run in windows without compatibility issues. If you browse inside, you can look at a lot of duplicate dll, each with the same name. These are actually different versions of the same files that are stored; different programs may require different versions. In short, Winsxs, acronym for "Windows Side By Side," is native assembly cache of Vista.

  However, I have some steps that will help you increase your computer's hard disk space.

  Method 1

  Delete all temporary files from your computer. To do this, follow these steps:

  1. click on the start search box.

  2. type %temp%, and then press ENTER.

  3. delete all files in the temp folder.

  Note: Leave the files that refuse to remove.

  Method 2

  Remove all the temporary files that may exist on CD and DVD burning.

  To do this, follow these steps:

  Delete all files in the folder in folder location to burn C:\Users\username\AppData\Local\Microsoft\Windows\Burn\Temporary burn and delete all the files.

  Method 3

  Run clean disc of the location (Start) > all programs > Accessories > system tools.

  Method 4

  If you do not use Hibernation you can save space in the space of hard drive as the amount of RAM installed by turning it off. In the run window, type powercfg.exe off h (spaces note both) and press ENTER. To re-enable type powercfg.exe h and press ENTER.

  See the link given below, where the user has had a similar problem.

  http://social.technet.Microsoft.com/forums/en/itprovistasetup/thread/ca7c724b-C9E7-453C-af9f-8836bf118d25

  Hope the helps of information. Please post back and we do know.

  Concerning

  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I hide the addresses in my list of contacts in specific group when I send an e-mail to this group?

  How can I hide the addresses in my list of contacts in specific group when I send an e-mail to this group?  I don't want to have all email addresses

  made available to everyone in the group.

  Thank you!

  You use Windows Mail? The bold at the bottom is the party concerned.
   
  You can also create groups if you send e-mail to the same people often.
   
  You can create a single group name (or alias) to use when sending a message to several contacts at the same time. Just create a group name and add individual contacts to the group. Then just type the name of the group in the box for when you send mail.
   
  1. in the address book, select the folder in which you want to create a group. Click New in the toolbar, and then click New Group.
  2. the Properties dialog box opens. In the group name box, type the name of the group.
  3. There are several ways to add people to the Group:
  a. to add a person from your address book list, click Select members, and then click a name in the address book list.
  (b) to add a person directly to the group without adding the name to your address book, type the person's name and e-mail address at the bottom of the Properties dialog box and then click Add.
  to add a person to both the Group and your address book, click New Contact and enter the appropriate information.
  (d) to use a directory service, click Select members, and then click search. Select a directory service in the drop-down list at the end of the text box. After finding and selecting an address, it is automatically added to your address book.
  4. Repeat for each addition until your group is defined.
   
  Note
   
  a. to view a list of your groups separately from the list of address book in the address book on the view menu, make sure that folders and groups is selected.
   
  b. you can create multiple groups, and contacts can belong to several groups.
   
  If you want to send to a group without addresses are displayed for each recipient, open the address book and make a new entry. Enter the name of the group in the area of the display, but use your address. (Some Internet service providers require a legitimate address in the line to and recipients will know it's from the Group).
   
  Click on the button to. Enter the name of the group using your address. Enter the group in the BCC field.
  

• Made a big mistake in trying to get rid of the partitions on the coming Pro 8. Operating system does not load!

  Hello

  First time on this type of forum so I hope that what I write is logical.  So, here.  I have improved my coming 8 Pro for Windows 10 and after the update it told me that I needed to make space on the disk.  I looked and there is not a lot of programs that I have removed looked beyond and found that there are 2 partitions that had almost 6 shows assigned to them which were not used.  I tried to reclaim that space.  I made a copy of recovery on the micro SD and that seems to work very well.  Then I fiddled around until I could remove the 5 + GB partition and reassign it to the primary partition.  The second partition (about 750 MB) I was able to free up, but as it was before the main partition, I wasn't able to retrieve space in the primary partition.  I downloaded a utility recommended to try to move at the end of the main partition so that I could get it back like this.  Everything seemed to work but it stopped crashing and I got a blue screen of Windows saying that "the application or the operating system could not be loaded..." ».  I figured out how to get into the bios to see if I could change the boot sequence, I created a windows 10 bootable USB and after a lot of work finally got the tablet to boot from USB.  At this point, Windows 10 wanted to re - install (which I'm fine with) but the only problem is that the touch screen unresponsive!  I assume that the driver is not loaded on a USB boot.

  Now I am trampled.  I don't really know how to go further.  Is there a way to get the drivers to load from the USB?  Can I send my tablet in a magical place where qualified technicians will be re - build it for me?

  Any assistance or moral support would be greatly appreciated.

  Thank you

  Richard

  Would you go through the process, and when you need to use the touchscreen, join via the microUSB port and an adapter USB OTG, a wired keyboard (and mouse wired, if necessary, via a multiUSB adapter attached to the adapter USB OTG) and then complete the installation of this way?  At this point, you can download the required drivers from the Web page of the Dell product support and win your touch screen feature back.

• "The requested operation requires a rise."

  Before installing Win 7 I saved a bunch of files and folders on an external hard drive. Tonight, when I tried to look at text files, I had created in Open Office, I got the error message "the requested operation requires a rise". If I right click and go to 'Properties' tab 'Security' and 'user or group name' there is a red question mark followed by a long row of numbers. (A reference to my existence of XP? Other names in this area to refer to my current system). There are options to change the permissions on 'Edit' and 'Advanced '. I don't like on these files, but I didn't change any settings that might adversely affect the program or the files of 'parent '.                                                                                                                                                              (When I created this title I had links to the forums of Vista, but the issues do not cover my problem.)

  The long row of numbers that you see in the list of accounts on the Security tab is called security ID (or a SID).  When Windows does not recognize the security identifier associated with file ACL (Access Control List / Permissions) it displays the SID.  Normally, Windows will be able to translate this SID in an account name or an alias, such as "domain\username".

  It seems that the original permissions are always associated with the files you are trying to access to and they are considered alien to the computer you are trying to access it from.  To open these files, you will need to take possession of them and give you access to read (or write/edit/delete).  This is the error message occurs.  "The requested operation requires an elevation" means that, in order to open the file, you will need high approval of a local administrator to capture and access.

  You may already be logged on to your system as a user who is a member of the local administrators, but Vista, Windows 7 and Windows Server 2008 offer additional layers of security to help protect your system.  This is called UAC or control user access.  Basically, even if you are the administrator Windows protects certain administrative functions with another layer of security.  You've probably seen the screen getting dimmed and a dialog asking you if you want to continue or cancel a certain operation.  It's UAC asking if you are really really really sure about what you are about to do and ensure that you're the only one doing it and not a red process or virus trying to take charge.

  In order to change the ownership of files that you can...

  1. go the properties of the folder that contains the files that needed to take possession of
  2. click on the Security tab
  3. click on Advanced
  4. click on the owner tab
  5. click on Edit...
  6. Select the account name in the change in ownership to the list that you want to support
  7. check the box, replace the owner of subcontainers and objects
  8. click on OK

  The ownership information will be updated on all objects in the folder including subcontainers (or subfolders).  Depending on the number of files and folders in your starting point there do this take a long time to complete.  Once it is down you will be able to change the security permissions you want to the files and folders (for example, control total, read-only, read & write, etc.).

  NOTE: If you are not logged in as administrator on your system, the above steps will work not like taking possession of object file requires administrator privledges.

• Can not see the 2nd partition on the computer after using the shrink volume option

  I had 2 partitions on the hard disk the same... but after separate 60 GB unallocated space of 2nd partition (drive D) and after rebooting I don't see my 2nd partition. After that I tried to change the drive letter and path, but it displays the following message 'the operation did not complete because the disk management console view is not updated. Refresh the view by using the refresh task. "If the problem persists close the disk management console, then restart disk or restart the calculation Managerr. I don't want to lose the data.

  Hello

  ·         Have you installed a third-party program like Partition magic on the computer?

  Try these methods further and check if it helps:

  Method 1:

  Try to use diskpart to assign a drive letter to the disk #0 Partition #1.

  (a) click Start Orb > type diskpart

  (b) click right diskpart in the above results > click run as administrator right

  (c) once diskpart load type list volume, press enter

  You should notice that you can see your partition you use for your data, it should not not have a drive letter assigned to it.

  (d) type select volume 6 (replace 6 with the number of the volume assigned to the partition in question)

  (e) type assign letter Z (replace Z with the letter you want to assign)

  When you look in the computer, you should be able to see your score.

  Method 2:

   

  I also suggest that you run the Microsoft fixit tool and check if that helps:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:

  You can follow the steps in troubleshooting section below and check if it helps:

  http://support.Microsoft.com/kb/2001877

• What are the minimum services required for booting to W7?

  I'm trying to get a list of the minimum services required for W7 starting, i.e. which must have the 'Automatic' property.  I guess that those who have the property of "Delayed start" starts when required after the start, right?

  Capnmike

  There is a 3rd party site with all this information called blackviper.com.