Partition recovery Pavilion DV6 or disks back to factory settings?

Similar Questions

• need the simple way to set the computer back to factory settings, and already saved safe data

  need the simple way to set the computer back to factory settings, and already saved safe data

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• I have to reset my pc back to factory settings...

  I need to rest my computer acer windows vista Home premium 64-bit back to factory settings. I do not have anyback of the discs, but I herd if you not a code or something you can always do.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11, Acer can be Alt + F10, at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• HP Pavilion F4U57EA #ABu 15: recover the system back to factory settings

  Have a HP laptop, had a major viral infection therefore decided to adjust the system settings of the invoice from the recovery partition.  Not just Boot device not found and just see menu BIOS only.

  Where can I get the ISO images to build a DVD to back to factory settings, system as he went out the book. As you had to install the OEM version even if I have a sticker of holgram WIN8 it seems to be without license key. or should I buy the HP image, and if so someone go the link

  Hello

  You can order a replacement set of the recovery media in the HP partner on the link below (I assumed the model No., you live in the United Kingdom).  These drives/flash player will automatically read the windows product key embedded in the bios.

  https://www.best2serve.com/page/rcd_search?utm_source=HP-customer-care&utm_medium=referral&utm_campaign=RCD&utm_content=part_740063-032

  Kind regards

  DP - K

• How can I restore my PC HP Pavilion Entertainenment back to factory settings

  I opened my computer and had a new display ever seen before and then all my documents, photos, books, etc. IncrediMail program at not here.

  have checked for viruses (even if I have anti-virus protection) found none and thought I'd start all over shave.  any suggestions?

  Hello

  See if it helps you so that you do not lose your docs, etc.

  Do a system restore to before the problem:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  _____________________________________

  If you want to start with a 'clean slate' again you press F11 at startup to start the process of recovery HP back to factory settings.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01867418&cc=us&destPage=document&LC=en&tmp_docname=c01867418

  See you soon.

• Restore HP Pavilion g6-2252sa Notebook PC to factory settings

  Can someone help

  I have a HP Pavilion laptop 2252sa g6. I want to restore the operating system back to factory settings.

  I can't make the hard disk recovery partition because it is not accessible. There is no recovery disk.

  What I got is the MS windows 8 keys. I was on the site of microsoft for re - install the software. Unfortunately, recvoery software says that my windows key 8 ms is not retail. (even if it's a valid key for ms windows 8 key). Where can I get hold of a copy of ms windows 8 running on this key?

  Concerning

  Parry

  Hello

  There are two options.

  1. you can order a set of replacement recovery disks - watching your model No. notebooks. You can live in the United Kingdom.  If that is correct, use the following link.

  https://www.best2serve.com/page/rcd_search?utm_source=HP-customer-care&utm_medium=referral&utm_campaign=RCD&utm_content=part_709042-031

  2 your laptop was initially provided with Windows 8, the activation key is stored in the chip of the Bios, so you could create your own Windows 8 OEM installation disc.  There is a cap for the Image file to download, you may need to try the period of a few hours.  Activation occurs automatically using this method as the key is read from the bios during the installation process.

  For more information about how to do this, see the post Hüffer 3rd on the following link.

  http://h30434.www3.HP.com/T5/notebook-hardware/need-product-key/m-p/2592099/highlight/false#M96668

  Best regards

  DP - K

• Satellite A300-15 has back to factory settings

  Hello!

  I have an old Satellite A300-15 and I want to go back to factory settings after almost seven years of never format the hard drive.

  I did a little research on this 'how... "but I still don't know if the laptop comes with a windows recovery or not.

  I have another laptop with a score of "windows recovery", but in my toshiba, the only thing I see is a recovery of HARD drive file in my E: partition. I don't really know if that helps the reinstallation of windows.

  So if I reset the laptop with the method 'laptop computer Tower, hold the blah blah 0 button"it completely format my C: and need to reinstall windows or not?

  (Running Windows Vista)

  How it works with the recovery image installation, you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  Start your laptop with F8 and choose the option to repair your computer. Follow the instructions on the screen and you will be able to install the original recovery image.

  Installation of recovery described called the installation of HARD drive recovery. With other words, saved on the HARD disk in the folder HDDRecovery recovery image will be reinstalled on the C partition only and the second partition of HARD drive will not be deleted or formatted.

  In my opinion, that you create the recovery using disc (DVD) preinstalled creator Toshiba recovery disc. You can use created bootable disks to install original Vista. When you use discs, the whole HARD disk will be deleted, formatted, new partitions created and installed Vista end.

  If you have any other questions you are welcome.

• Qosmio F50: HDD recovery entry missing - how to get to factory settings

  I got the BSoD problem with driver nVidia 9700 m GTS and will not let me complete installation of recovery.

  I installed Win Vista from a DVD of Windows recovery in order to have a clean with the standard to avoid more VGA driver installation of accidents due to the nVidia card is malfunctioning. Installation has been set without doing anything on the HARD drive recovery partition partition C, in fact I can see all the files inside my computer folder.

  The problem is that now I want to recover the original Win Vista recovery disk, but when I do F8 during startup, I don't see the Toshiba Recovery mode, even if all the files are still in the recovery partition.

  Can I use any software inside windows to launch the recovery? Or any other disk recovery solution?

  Thank you!

  Hi mate

  You need to create a recovery disk in the past;(à côté de l'option de récupération de disque DUR, il s est fortement recommandé de créer le disque de récupération dans le cas où quelque chose irait mal avec le disque DUR.)
  I guess that the new operating system installation has changed the boot manager that was configured by Toshiba now, you have the standard Microsoft boot manager.

  But I found this interesting forum thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=164927&

  + DO YOU NEED A PARTITION ORIGINAL WITH THE ORIGINAL FILE INSIDE D & E: +.
  + OTERWISE IS IMPOSSIBLE TO RESTORE. +
  + YOU MUST FILE WITH THE ORIGINAL FILE E:\HDDRECOVERY INSIDE.
  + YOU MUST D: "WINRE" PARTITION WITH THE ORIGINAL FILE INSIDE. +

  + 0 - save all the data you need in the C: partition.
  + 1 start vista dvd (not important what version) +.
  2. Click on install to start the installation process.
  3 Select the expert mode to manage HD +.
  + 4 Delete partition C: +.
  + 5 create a major score and let free 10 G for later(vista dvd will call it C:) +)
  + 6 format this partition.
  + 7 create a small partition about 10 G on the space possible.
  + 8 format this partition too(vista will call it G:) +)
  + 9-tool disc hard close vista (back in the first window).
  10 click on "restore boot"(i don't know how it call in english version) + "."
  + you need to start the CMD console +.
  + 11 in the cmd console go to e:\hddrecovery\oddfiles\tools+
  + 12:type ' imagex/apply d:/sources/boot.wim 1 g: "it will create a list of files and folders in G: +". "
  + 13:go to g:\sources\recovery\tools+
  + 14:type 'hddrecogui' (it will open the gui of the toshiba recovery tool process).
  + 15:follow instructions of the toshiba recovery tool +.
  + 16 Enjoy the original factory settings.
  + 17 now you can remove the G: ex-partition and expand the C: partition with Disk Manager program. +
  + 18 CREATE THIS DVD RECOVERY +

  I hope this helps!

• Need help with laptop back to factory settings

  can someone help me on how to put my laptop back to factory settings

  Hello

  It would help if you told us your laptop brand and operating system.

  This is general information on how to do it:

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall using the recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the hard drive Partition reinstall back to how you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  See you soon.

• I need to restore my laptop back to factory settings HP.

  I have Windows Vista Home Premium. But I don't know if it matters at this point.  My laptop does not recognize my hard drive, webcam, location of the backup file, scroll bar, does not allow me to run programs troubleshooting etc... the list is long. I want to just restore my computer to original date and start from scratch. Help, please.

  Hello

  by HP, I hope you mean that Hewlett Packard is the manufacturer, because the manufacturers have different ways to do

  If you don't have a recovery disc as it never came with it, press F11 at startup to start the process of recovery back to factory settings

  all data will be wiped from the hard drive during the process

  Here are the two ways to do:

  Restore the PC to its original state with the HP Recovery Manager of in Windows Vista

  If the PC can be started and opens on the Windows desktop, you can use the HP recovery disk to restore the PC to original factory State by following the steps below.

  1. Click Start and enter the recovery in the field of research. Select Recovery Manager in the list, when it becomes available. Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
     Alternatively, click Start , all programs , Recovery Manager , and then Recovery Manager . Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
  2. Click Advanced options , System Recovery , and then click Next . The PC will restart and reopen the Recovery Manager.
     Alternatively, if the advanced options is disabled, click Next , and then System Recovery . The PC will restart.
  3. When the PC restarts, select the System Recovery option and click Next .
  4. If you are prompted to use the Microsoft System Restore , click No and then click Next .
  5. When you are prompted, select back up your files first (recommended) , and then click Next . Follow the on-screen instructions.
  6. When you are prompted to recover without backing up your files , please STOP before you click Next .

     CAUTION:

     It's the last chance to change your mind recovery PC and delete all the files and programs. Once you click Next , the restore process cannot be stopped

  7. If you are convinced that you want to start the recovery process, click Next . The PC immediately starts formatting the disk hard drive and destroy all data.

  The recovery process may take up to several hours and will return the PC to its original state. All custom, settings drivers, software and upgrades or hardware updates are lost and must be reinstalled.
  Restore the PC to its original state with the HP Recovery Manager if Windows Vista is not accessible
  If the PC does not start under Windows, it may still be possible to use the HP recovery disk to restore the computer to its original state. The Recovery Manager can be started during the boot process by following the steps below.
  1. Press on the button / stop to start the PC and press the f11 key when the standard BIOS guests appear on the black screen.

     NOTE:

     By pressing the f11 key at startup on a computer with an image factory HP will start the system recovery process, even if the message is not displayed.

     • If the HP Recovery Manager can access the hard disk recovery partition, a prompt to back up user files before you start the recovery
  . Follow the instructions.
  • If the HP Recovery Manager cannot access the hard disk to resolve system errors, you need to use the recovery disk custom that you created to recover the hard disk to its original state.
  • If you have not created the custom recovery disk, or disks are damaged, you can order a replacement of HP recovery CD.

• When the Recovery Manager starts, follow the instructions of recovery step by step , shown above.

• How can I get my computer back to factory settings?

  my computer is slow and I want to restore it back to factory settings, so this has nothing about it except the important things, like when you get everything first... does anyone know how to do this?

  Note that if you save all the important things, it will be lost after the reset.

  After the reset, you should get all the updates from Windows Update EXCEPT for hardware devices. Then, you install a good antivirus. ONLY AFTER you have done this, if you replace the stuff of backups or install anything else.

  Your laptop is equipped with a recovery instead of disk partition

  .

  This is how the recovery partition is available for the most popular brands

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  You may need to try several times to get everything above to work. If after several attempts, you have no chance, or the machine indicates that there is no recovery partition, your only option is to contact the computer manufacturer and ask for the model recovery discs...

• Yoga 11 s - back to factory settings

  Hello

  This is my first post and I hope that you can help us?

  I need to get the recovery CD for my yoga 11s to put it back to factory settings?

  How can I achieve this?

  Please can someone help?

  Thank you

  You don't mention that you have created a recovery machine USB flash disk before the original failure to SSD, so I would say that you should contact the technical support number in my post above. They should be able to explain what options you need to recover your factory licensed operating system / configuration of the machine.

  Kind regards.

• reset computer laptop back to factory settings

  HOW CAN I RESET MY LAPTOP BACK TO FACTORY SETTINGS

  Hello

  Judgment of the laptop.  Start typing away at f11 as soon as you press the power button to start the Recovery Manager that you can then use to reinstall the operating system.

  Alternatively, if you have created a set of recovery disks, insert the first disc and restart the computer to start the process.

  Either way is fine.

  Kind regards

  DP - K

• How can I re - adjust my iMac back to factory settings?

  My iMac has slowed to where I can barely use it. It also expands the page I look without any in put me. I think that the only cure is to go back to the first day. I backed up my files. How can I re - adjust my iMac back to factory settings?

  Allows you to reformat your Mac OS X Recovery > OS X Recovery.

• How can I put Satellite A300 - 29U back to factory settings?

  I don't know how to put my Toshiba Satellite A300 29U back to factory settings. I tried everything, but I have no idea how to do that? I have no CD or whatever.

  Thank you.

  If your laptop has the factory settings you can do it as described on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  Please note: this drive HARD recovery option works with the factory only settings.