Partitioning of an existing Table.

Similar Questions

• How add us partition on an existing table?

  Hi gurus,

  What would be the best way to add a partition to an existing table?

  Is there a simple documentation for example?

  Thank you

  What would be the best way to add a partition to an existing table?

  Is there a simple documentation for example?

  Was it something you were ask in an interview?

  You cannot add a partition to a table unless this table is a partitioned table.

  The table is already partitioned? If so, after the DDL.

  The Oracle documentation has examples of adding partitions to a table that is already partitioned

  Partition management

  Adding Partitions

  This section explains how to manually add partitions of a partitioned table and explains why partitions can be added specifically for partitioned more indexes.

  Adding a Partition to a partitioned Table range

  Use of the ALTER TABLE ... ADD PARTITION statement to add a new partition at the end 'high' (the point after the last existing partition). To add a partition at the beginning or in the middle of a table, use the SPLIT PARTITION clause.

• Cannot add the partition to an existing table.

  Hello

  I don't add the partition to an existing table that is not partitioned, get the error as a type of data not valid, then I'm not find syntax errors.

  ALTER TABLE MESSAGEX_XCHANGE

  ADD THE PARTITION OF RANGE (LAST_MODIFY_TIMESTAMP)

  (

  PARTITION old_data VALUES LESS THAN (To_TIMESTAMP('27/02/2014','DD/MM/YYYY')),

  You see for VALUES LESS THAN (To_TIMESTAMP('28/02/2014','DD/MM/YYYY')) of the PARTITION

  );

  Error report:

  SQL error: ORA-00902: invalid data type

  1. 00000 - "invalid data type".

  * Cause:

  * Action:

  Thank you

  Manon...

  You get this error because your edit statement has an invalid syntax. In addition, you cannot partition a table that is not already configured for partitioning!

  You have to physically re-create the partitioned table in order to add new partitions to it.

• Type logic Partition of an existing table

  Dear all,
  
  My database is 10gr 2 and Linux is the operating system.
  
  One of my table in the production database is huge and contains lots of data. Table is growing daily. There are many queries that users run on this table and the selection criteria is normally the date of entry of the registration, it's an Entrty_Date field with the date data type.
  
  I want a partition logical on this table in such a way, the table name remains the same, and data are logically partitioned.
  
  As if the Entry_Date is from 2005, a partition is made on criteria:
  
  
  2005-2006
  2006-2007
  .
  .

  2011

  . at the request of the user for records having entry date > 2011... the query is made only this piece of the table, which makes the fast query.
  
  I hope that I am able to make you understand my problem. If its possible in Oracle please let me know the name of the method and I'll RND on this one. And I have to do it on an existing table that contains a lot of data.
  
  Thank you
  Imran

  Hello

  You can do this
  http://www.Oracle-base.com/articles/Misc/PartitioningAnExistingTable.php
  I suggest go fill through the myths of have from before backward Oracle documentation and to understand and then to proceed
  http://download.Oracle.com/docs/CD/B10501_01/AppDev.920/a96612/d_redefi.htm

  -Pavan Kumar N

• Partitioning of an existing Table using the EXCHANGE PARTITION

  Hi all

  I have one unpartitioned table I partitioned by Exchange, this table has several indexes and constraints (primary and foreign).

  ALTER TABLE notpart_table ADD (
      CONSTRAINT PK_KCESPITI PRIMARY KEY (K_CESP, TIPORD)
          USING INDEX TABLESPACE TBLS_CONTA,
      CONSTRAINT FK_KCONTO_CE FOREIGN KEY (K_CONTO) REFERENCES xxxx (K_CONTO));
  
  CREATE INDEX IX_NFATTURA_CE ON notpart_tab (ANNO_FATTURA, K_REGISTRO, K_REGFA, TIPORD)
      TABLESPACE TBLS_CONTA;
  
  
  
  
  

  after Create a partitioned Table Destination

  notpart_table2, I created the same constraints and indexes defined in notpart_table

  
  

  When I run

  
  

  ALTER TABLE notpart_table2
    EXCHANGE PARTITION PART_notpart_table2
    WITH TABLE notpart_table
    WITHOUT VALIDATION
    UPDATE GLOBAL INDEXES;
  
  
  
  

  I get: ora-02266

  Why?

  Thanks in advance for any help

  
  

  Post edited by: vigilant Rosario

  It is not exactly what you have. Very probably not partitioned table, you are partitioning is the parent to another table table:

  SQL > create table tbl1 (id number)
  2.

  Table created.

  SQL > alter table tbl1
  2 Add the constraint tbl1_pk
  3 primary key
  4.

  Modified table.

  SQL > create table tbl2 (id number)
  2.

  Table created.

  SQL > alter table tbl2
  2 Add the constraint tbl1_fk1
  3 foreign key
  4 references tbl1
  5.

  Modified table.

  SQL > insert into tbl1 values (1)
  2.

  1 line of creation.

  SQL > insert into tbl2 values (1)
  2.

  1 line of creation.

  SQL > create table tbl1_part (id number)
  2 partition by range (id)
  3 (partition p1 values less than (1000000))
  4.

  Table created.

  SQL >
  SQL > alter table tbl1_part
  Exchange 2 partition p1
  3 with table tbl1
  4 without validation
  5 update global indexes
  6.
  with table tbl1
  *
  ERROR at line 3:
  ORA-02266: permit to unique/primary keys in table referenced by foreign keys

  SQL >

  If so, of the foreign key and recreate it pointing to the partitioned table as parent after finished partitioning the table.

  SY.

• Partition on existing Tables

  Hello
  
  I want to archive a database due to too much data into DB everymonth, so I have to delete the records from the previous month, which is about 4 million.
  
  Can someone give me idea to delete records as soon as possible. My opinion is to create the partition on the table and drop the partition once he becomes older.
  But if I want to introduce the partition then I have to create a partition in an existing table. So please give me the best way to introduce the partition of the existing table.
  
  It would really help that may suggest meanings.
  
  Thank you
  
  Spengler

  Here is an example

  CREATE TABLE my_table (
    id           NUMBER,
    description  VARCHAR2(50),
    create_date date
  )PARTITION BY RANGE (create_date)
  (PARTITION id_id0 VALUES LESS THAN (TO_DATE('26/08/2009', 'DD/MM/YYYY')) TABLESPACE users,
   PARTITION id_id1 VALUES LESS THAN (TO_DATE('27/08/2009', 'DD/MM/YYYY')) TABLESPACE users,
   PARTITION id_id2 VALUES LESS THAN (TO_DATE('28/08/2009', 'DD/MM/YYYY')) TABLESPACE users,
   PARTITION id_id3 VALUES LESS THAN (TO_DATE('29/08/2009', 'DD/MM/YYYY')) TABLESPACE users,
  PARTITION id_id4 VALUES LESS THAN (TO_DATE('30/08/2009', 'DD/MM/YYYY')) TABLESPACE users,
  PARTITION id_max  VALUES LESS THAN  (MAXVALUE) TABLESPACE users);
  

  -Insert the sample data

   INSERT INTO my_table  VALUES (0, 'ZERO',sysdate);
  INSERT INTO my_table  VALUES (1, 'One',sysdate+1);
  INSERT INTO my_table  VALUES (2, 'Two',sysdate+2);
  INSERT INTO my_table  VALUES (3, 'Three',sysdate+3);
  INSERT INTO my_table  VALUES (4, 'Four',sysdate+4);
  COMMIT;
  

  -You can run these queries to check the output.

  select * from my_table;
  select * from my_table partition(id_id0);
  select * from my_table partition(id_id1);
  select * from my_table partition(id_id2);
  select * from my_table partition(id_id3);
  select * from my_table partition(id_id4);
  select * from my_table partition(id_max);
  

  -Split partition

  ALTER TABLE my_table SPLIT PARTITION id_max AT (TO_DATE('01/09/2009', 'DD/MM/YYYY'))
  INTO (PARTITION id_id5 TABLESPACE users,PARTITION id_max TABLESPACE users);
  

  -Insert data into the new partition

  INSERT INTO my_table  VALUES (5, 'FIVE',sysdate+5);
  commit;
  

  -check

  select * from my_table partition(id_id5);
  

• Need to create the Partition in the history table

  Hello

  I have an audit table that stores the data for the last 8 years in it and the customer wants to retain the data for the last 8 years. Now as adding data to this table is increasing, there is a delay in execution of report which are acquired by querying on this table.

  Basically, they go a from date and to date. Then these date are compared with two columns of dates in the table. The condition of the query will be as below

  TRUNC (NVL (DATE1, DATE2)) > = TRUNC (TO_DATE (?, ' dd/mm/yyyy ""))

  AND TRUNC (NVL (DATE1, DATE2)) < = TRUNC (TO_DATE (?, ' dd/mm/yyyy ""))

  Users can query for any date range.

  I am thinking of creating a Partition of the range on this table for each month during the 8 years of data. Please suggest on the question of whether I should use partition interval range to make it more effective. And would also create an Index on this partition for the above two day columns.

  12 (months) SO * 8 (years) = 98 would be created partitions. This will not overload the schema of database/Tablespace? Y at - it another effective way to set the table.

  Please suggest and let me know for any clarification.

  There are 2 approaches (but not limited to 2) to create the Partition on an existing table:

  Note: There is no ALTER TABLE statement to convert a heap table to a partitioned table.

  1. create a temporary Partitioned table with the same types of data in the column. Take a dump of the original table (HEAP) export and import the dump into the newly created partitioned intermediate table. After checking the data file the original and rename the interim even as the original table.

  2 using the package Oracle DBMS_REDEFINITION automates the steps above from said (not exactly the same steps, however) and its done online - which means there is no required downtime, the original table may undergo DML operations during this process of redefinition. View partitioning of a table online with DBMS_REDEFINITION | Oracle instructor

  According to my understanding if let us know as a partition interval then in April if there is an inserted record then it will create a new partition for the month of April will be of value less than 30 April 2014 "and all other documents created in April will pass under it"

  Yes, it's a feature of 11g, which Oracle manages adding partitions as needed. In earlier versions DBA can add partitions manually from time to time. Reference www.gavinsoorma.com/2009/09/11g-interval-partitioning/

  Here the reason for check the sent_out_datetime NVL will be NULL for few records, so in this case we want to get the records for dates of mapping them to received_datetime

  In addition, try to replace the NVL with COALESCE and test it. This would help improve performance.

• Partitioning of an existing partitioned table

  Dear Experts,

  I have a problem with redefinition of partitioning of an existing partitioned table. I have a parent table separated by a virtual column by range:

  CREATE THE PARENT TABLE

  (

  PARENT_ID NUMBER NOT NULL,

  INSERT_TIMESTAMP TIMESTAMP (6) NOT NULL,

  CLOB PARENT_DATA NOT NULL,

  BATCH NUMBER,

  DATE of INSERT_DATE generated always as (TRUNC("INSERT_TIMESTAMP"))

  )

  LOB (PARENT_DATA) AS STORE NAVIGATION (ACTIVATE ONLINE STORAGE)

  PARTITION BY RANGE (INSERT_DATE)

  (

  P2015_11 PARTITION VALUES LESS THAN (TO_DATE (' 2015-12-01 00:00:00 ',' SYYYY-MM-DD HH24:MI:SS ',' NLS_CALENDAR = GREGORIAN '))

  CRAFT STORE (PARENT_DATA) AS (SECUREFILE

  ACTIVATE THE ONLINE STORAGE),

  P2015_12 PARTITION VALUES LESS THAN (TO_DATE (' 2016-01-01 00:00:00 ',' SYYYY-MM-DD HH24:MI:SS ',' NLS_CALENDAR = GREGORIAN '))

  CRAFT STORE (PARENT_DATA) AS (SECUREFILE

  ACTIVATE THE ONLINE STORAGE),

  P2016_01 PARTITION VALUES LESS THAN (TO_DATE (' 2016-02-01 00:00:00 ',' SYYYY-MM-DD HH24:MI:SS ',' NLS_CALENDAR = GREGORIAN '))

  CRAFT STORE (PARENT_DATA) AS (SECUREFILE

  ALLOW ONLINE STORAGE,

  PARTITION P_DEFAULT VALUES LESS THAN (MAXVALUE)

  CRAFT STORE (PARENT_DATA) AS (SECUREFILE

  ALLOW ONLINE STORAGE

  ))

  );

  and a child table partitioned by reference:

  CREATE ACCOUNTS FROM THE TABLE. CHILD

  (

  PARENT_ID NUMBER NOT NULL,

  DATAACC DATAACC_TBL,

  CREATION_DATE DATE,

  CONSTRAINT PARENT_D_E_PRT_FK

  FOREIGN KEY (PARENT_ID)

  (PARENT_ID) REFERENCES PARENT

  ENABLE VALIDATE

  )

  NESTED TABLE, STORE DATAACC AS DATAACC_NT

  PARTITION OF REFERENCE (PARENT_D_E_PRT_FK)

  (

  P2015_11 PARTITION,

  P2015_12 PARTITION,

  P2016_01 PARTITION,

  PARTITION P_DEFAULT);

  However, now in Oracle 12 c I am able to use the reference interval partitioning. How can I redefine the partitioning of the parent table so that there can be scope-level?

  Thank you for your help.

  Best regards, Atanas.

  To change range partition to partition interval, the table should not have MAXVALUE partition... Follow the steps below to convert to partition interval

  (1) check if all data of the MAXVALUE partition (p_default) using query below

  SELECT COUNT (*) FROM parent PARTITION (p_default).

  (2) if there is no trace in the p_default partition, drop the help below

  ALTER TABLE DROP PARTITION parent p_default;

  (3) use the clause SET INTERVAL to convert the range partition partition interval as below

  ALTER TABLE parent SET INTERVAL (NUMTOYMINTERVAL(1,'MONTH'));

  I guess, you have the range partition up to until, so there should not be any folder in p_default partition.

• Creating a partitioned table to an existing table interval.

  Hello

  Is there a way I can create a partitioned table interval of an existing table using DEC? I know how to create a partitioned table in range.

  create the table range_partitioned_table

  partition by range (date_column)

  (

  partition p1 lower ((to_date (' 08/01/2012 ',' mm/dd/yyyy'))),

  lower partition p2 values (to_date (' 09/01/2012 ',' mm/dd/yyyy')),

  PN VALUES LESS THAN (MAXVALUE) PARTITION

  )

  AS SELECT * from existing_table;

  Is there a similar way to the Interval partition an existing table?

  create the table interval_partitioned_table

  partition by range (date_column)

  interval (provide the interval)

  (

  partition p1 lower ((to_date (' 08/01/2012 ',' mm/dd/yyyy'))),

  partition p2 values less (to_date (' 09/01/2012 ',' mm/dd/yyyy')),

  -PN SCORE VALUES LESS THAN (MAXVALUE)

  )

  AS SELECT * from existing_table;

  For example:

  SQL > create table interval_partitioned_table
  2 partition by range (hiredate)
  interval of 3 (numtoyminterval(1,'YEAR'))
  (4)
  5 score below p1 ((to_date (' 08/01/2012 ',' mm/dd/yyyy'))),
  6 partition p2 values less (to_date (' 09/01/2012 ',' mm/dd/yyyy')),
  7 - PARTITION pN VALUES LESS THAN (MAXVALUE)
  8)
  9 AS SELECT * FROM emp;

  Table created.

  SQL >

  SY.

• modify an existing table to selectively the partition interval range

  I'm using Oracle 11.2.0.3.
  
  I have an existing table that has parition interval range.
  
  example:

   
  create table Log( ts date, level  varchar2(20), scr varchar2(2000))PARTITION BY RANGE (TS)
  INTERVAL( NUMTODSINTERVAL(1,'DAY'))

  Currently, we have the log of the table that is the partition of the range by day and we drop old parition to a week. However, we want to change this to persist the records in the table of WHICH = LEVEL "IMPORTANT."
  
  What is the best way to achieve this?

  >
  Is it possible to modify the existing interval partition table to add partition in the list?
  >
  Only using the DBMS_REDEFINITION to do online. And that always involves the creation of a "provisional" table

  If you have a window of failure just to create a new partitioned table the way you want to and INSERT the data into it. You should be able to use a DEC to do if you want. You may not use swap partition since all data must be physically moved.
  >
  Can we do list-interval partition table i.e. (with partition interval as partition sup)?
  >
  No - subpartitioning of interval is not currently supported.

  Here is the code example of a partitioned table by using the RANGE-interval LIST. It uses a VIRTUAL column, but you can ignore it for your use case

  DROP TABLE mytable;
  
  CREATE TABLE mytable
  (
  CREATION_DATE TIMESTAMP(6),
  LAST_MODIFIED_DATE TIMESTAMP(6),
  CREATION_DAY NUMBER(2) GENERATED ALWAYS AS (TO_NUMBER(TO_CHAR(CREATION_DATE, 'DD'))) VIRTUAL
  )
  PARTITION BY RANGE (LAST_MODIFIED_DATE) INTERVAL(NUMTOYMINTERVAL(1, 'MONTH'))
  SUBPARTITION BY LIST (CREATION_DAY)
     SUBPARTITION TEMPLATE
     ( SUBPARTITION days_1_5 VALUES (1,2,3,4,5)
     , SUBPARTITION days_6_10 VALUES (6,7,8,9,10)
     , SUBPARTITION days_11_15 VALUES (11,12,13,14,15)
     , SUBPARTITION days_16_20 VALUES (16,17,18,19,20)
     , SUBPARTITION days_21_25 VALUES (21,22,23,24,25)
     , SUBPARTITION days_26_31 VALUES (26,27,28,29,30,31)
     )
  (
     PARTITION prior_to_2013 VALUES LESS THAN (TO_DATE('2013-01-01', 'YYYY-MM-DD'))
  )
  

• FDPSTP failed due to the ORA-02149: specified partition does not exist

  EBS R12.1.3
  Database 11.2.0.2
  Error message
  

  **Starts**23-JUL-2012 16:49:21
  ORACLE error 2149 in FDPSTP
  
  Cause: FDPSTP failed due to ORA-02149: Specified partition does not exist
  ORA-06512: at "SYSTEM.AD_DDL", line 165
  ORA-06512: at "APPS.MSC_MANAGE_PLAN_PARTITIONS", line 371
  ORA-14074: partition bound must collate higher than th
  +---------------------------------------------------------------------------+
  Start of log messages from FND_FILE
  +---------------------------------------------------------------------------+
  j := 1
  table := MSC_ATP_SUMMARY_SO
  partition_name : ATP_SUMMARY_SO__1
  l_count := 1
  Partition for instance 1 already exists
  table := MSC_ATP_SUMMARY_SD
  partition_name : ATP_SUMMARY_SD__1
  l_count := 1
  Partition for instance 1 already exists
  l_share_partition := N
  plan count := 0
  After Create Partitions
  +---------------------------------------------------------------------------+
  End of log messages from FND_FILE
  +---------------------------------------------------------------------------+

  901629 wrote:
  EBS R12.1.3
  Database 11.2.0.2
  Error message

  **Starts**23-JUL-2012 16:49:21
  ORACLE error 2149 in FDPSTP
  
  Cause: FDPSTP failed due to ORA-02149: Specified partition does not exist
  ORA-06512: at "SYSTEM.AD_DDL", line 165
  ORA-06512: at "APPS.MSC_MANAGE_PLAN_PARTITIONS", line 371
  ORA-14074: partition bound must collate higher than th
  +---------------------------------------------------------------------------+
  Start of log messages from FND_FILE
  +---------------------------------------------------------------------------+
  j := 1
  table := MSC_ATP_SUMMARY_SO
  partition_name : ATP_SUMMARY_SO__1
  l_count := 1
  Partition for instance 1 already exists
  table := MSC_ATP_SUMMARY_SD
  partition_name : ATP_SUMMARY_SD__1
  l_count := 1
  Partition for instance 1 already exists
  l_share_partition := N
  plan count := 0
  After Create Partitions
  +---------------------------------------------------------------------------+
  End of log messages from FND_FILE
  +---------------------------------------------------------------------------+
  

  How do you get this error?

  Please see (INSTALLER ALERT - setting the APS scores upward and Instance of Collections of data in R12 [552415.1 ID]).

  Thank you
  Hussein

• Syntax for exchanging a partition with an empty table

  Hello
  
  I have a PLP_2001FY partition and I want to share this partition with an empty table (ex: DRB_WHOLE_DATA_TEMP) structured as DRB_WHOLE_DATA (this table already exists).
  
  Thank you

  Do you mean that you want to fill the empty array with the contents of the partition?

  If so:

  insert into DRB_WHOLE_DATA_TEMP select * from DRB_WHOLE_DATA partition (plp_2001fy)
  

• We get an error "could not create a new partition or find existing. "For more information, see the Setup log file" error message "while trying to install Windows 8

  * Original title: 8 victory moved - Error Message: failed to create new partition...

  I have Win XP on my Dell Dimension 5150, which is the dual boot with Linux Mint 12 Lisa and this is my favorite of the bunch.

  I bought the DVD of 8 Pro Windows by an Australian retailer.

  Win XP is on a 39 GB partition with other application files. I had to delete several files to get the free space necessary to WIN 8 and finally finished by formatting the partition and passes for a COMPLETE new installation.

  Unfortunately, I now get the "failed to create new partition or find existing. For more information, see the Setup log file"error message. I can't find a Setup log file that I do a boot from the DVD.

  I tried to delete all external drives and other USB devices, including my Modem but my Wired USB keyboard/mouse.

  Two internal HARD drives are as follows:
  Disk 0 Partition 1-110 GB - system (LINUX)
  Disk 0 Partition 2 - 3.5 GB - logical

  Disk 1 Partition 1 - 47 MB - OEM (reserved) [DellUtility]
  Disc 1 2:Win - 39.1 GB - System Partition
  1 3 disk partition: DATA - 39,1 GB - logical
  Disk partition 1 4:OfficeProgs - 19.5 GB - logical
  Partition on drive 1 logical - 39.1 GB - 5:PROJECTS
  etc to score 8 with 9 MB of unallocated space.

  I have tried both 64 and 32 discs with the same result.

  As I have now is no longer no matter what Windows on my computer, what's the next step? If any ;-)

  Hello

  I solved the problem. It seems that you can not install on a secondary partition with in an earlier version of windows. You must restart the computer and run the installation from a dvd or other media.  Once you get the installation running you should be able to install on another partition without any problems.

  Nice day

• Create procedure upsert (name of the existing table, incoming table name)

  Is it possible to create a procedure that makes a merge (upsert) with only two parameters:

  1. Existing Table name - name of table that will have data merged into it.
  2. Incoming Table name - name of the table that has developed data day/news.

  The method would be:

  1. Use primary keys on the "existing" table as the condition links
  2. Fact and update if exists and insert new
  3. no record
  4. no clues
  5. no removal clause

  Oracle 11g

  MERGE < tip > < table_name >

  USING < table_view_or_query >

  (< CONDITION >)

  WHEN MATCHED THEN < update_clause >

  DELETE < where_clause >

  WHEN NOT MATCHED THEN < insert_clause >

  [ERRORLOG < log_errors_clause > < reject limit < integer | unlimited >];

  < table_name > - from input parameter

  < table_view_or_query > -socket input parameter

  < condition > - primary key links (how search a single/multiple primary keys and return the list?)

  < update_clause > - update all columns (other than KP, how to get and use a dynamic list of columns)

  < where_clause > - not used

  < insert_clause > - insert new records for all columns (including the PK (s))

  declare

  p_source varchar2 (30): = "EMP_X";

  p_target varchar2 (30): = "EMP_Y";

  query varchar2 (32000);

  function get_cols (p_table in varchar2) return varchar2 is

  VARCHAR2 (32000) retval;

  Start

  Select the Group (order of column_id) listagg (column_name, ',')

  in retval

  of user_tab_cols

  where table_name = p_table

  Table_name group;

  Return retval;

  end;

  function get_keys (p_table in varchar2) return varchar2 is

  VARCHAR2 (4000) retval;

  Start

  Select listagg (cc.column_name, ',') in the Group (order by cc.position)

  in retval

  from user_constraints c,.

  user_cons_columns cc

  where cc.table_name = p_table

  and c.constraint_type = 'P '.

  and cc.table_name = c.table_name

  and cc.constraint_name = c.constraint_name

  C.table_name group;

  Return retval;

  end;

  function merge (p_merge1 varchar2, p_merge2 varchar2, p_link varchar2) return varchar2 is

  Merge1 varchar2 (32000): = p_merge1 | «, » ;

  merge2 varchar2 (32000): = p_merge2 | «, » ;

  VARCHAR2 (32000) retval;

  Start

  then merge1 is not null

  loop

  retval: = retval | » t.'|| substr (Merge1, 1, InStr (Merge1, ',') - 1) |'s =.' | substr (merge2, 1, InStr (merge2, ',') - 1);

  Merge1: = substr (merge1, instr(merge1,',') + 1);

  merge2: = substr (merge2, instr (merge2, ',') + 1);

  If merge1 is not null then

  retval: = retval | p_link;

  end if;

  end loop;

  Return retval;

  end;

  Chopper (p_cols p_keys varchar2, varchar2) return varchar2 is

  passes varchar2 (32000): = ', '. p_cols | «, » ;

  keys varchar2 (32000): = ', '. p_keys | «, » ;

  VARCHAR2 (32000) retval;

  Start

  While the keys! = «, »

  loop

  If instr (passes, substr (keys, 1, instr(keys,',',1,2))) = 1 then

  cols: = substr (collars, instr(cols,',',1,2));

  on the other

  cols: = substr (passes, 1, instr (passes, substr (keys, 1, instr(keys,',',1,2))) | substr (collars, InStr (collars, ',', InStr (passes, substr (Keys, 1, InStr(Keys,',',1,2))), 2) + 1);)

  end if;

  keys: = substr (keys, instr(keys,',',1,2));

  end loop;

  return trim (both ',' collar);

  end;

  Start

  query: = 'merge'. p_target |' t ' |' using (select ' | get_cols (p_source): ' from ' | p_source |') s '.

  ' on ('|) Merger (get_keys (p_target), get_keys (p_source), 'and') |') ' ||

  "When matched then update set ' | '. Merger (Chopper (get_cols (p_target), get_keys (p_target)), Chopper (get_cols (p_source), get_keys (p_source)), ',').

  «When not matched then insert ('|)» get_cols (p_target) |') values (s.'|) Replace (get_cols (p_source),', ', ', s') |') ';

  dbms_output.put_line (Query);

  end;

  
  

  Fusion in EMP_Y t using (select EMPNO, ENAME, JOB, MGR, HIREDATE, SAL, COMM, DEPTNO EMP_X) s on (t.EMPNO = s.EMPNO and t.ENAME = s.ENAME) when matched then update set t.JOB = s.JOB, t.MGR = s.MGR, t.HIREDATE = s.HIREDATE, t.SAL = s.SAL, t.COMM = s.COMM, t.DEPTNO = s.DEPTNO when not matched then insert (EMPNO, ENAME, JOB, MGR, HIREDATE, SAL, COMM, DEPTNO) values (s.EMPNO, s.ENAME, s.JOB, s.MGR, s.HIREDATE, s.SAL, s.COMM, s.DEPTNO)

  Concerning

  Etbin

• ADOBE Acrobat Pro DC - add lines to an existing table

  Hello. I have an existing table, I need to add lines.  Is this possible? Thanks in advance.

  It is very difficult to do something like this in a PDF file (unless it was created using LiveCycle Designer).

  You will be better off by changing the original file, and then creating a new PDF from it.