pass a value IR: apex oracle 5.0

Similar Questions

• By passing the value in column IR to package Oracle

  All,
  I try to call a package Oracle of APEX and must pass the value of a column of IR in this packaging. I tried saying: ADJ_ID but I don't think his pasing anything for the backend.
  Here are the steps.
  1. the user runs IR
  2. There is a column that I put as "ROLLBACK" on this report for each line that has a LINK that calls URLS like
  JavaScript:apex.confirm (' safe to restore adaptation? "," SEND");
  3. once the user confirms submit, I call the package, package gets called but I want to send a value for that line to the package, I do this by saying: (colon) rating but it does not work.
  
  Thank you
  Vishal

  You must set you page item (as you try to pass by using the method of colon in PLSQL) first

  You can change your link to

  * JavaScript:apex.confirm ("Sure to restore adaptation?", {request: 'SUBMIT', value: {"P1_ROW_VALUE": 10}}); *

  P1_ROW_VALUE is the Page element that you want to set and 10 here is specific to the LINE value

  If you use the "links" section in the report attributes
  and then, something like that would

  * JavaScript:apex.confirm ('Safe to restore the fit?', {request: "SUBMIT", value: {'P1_ROW_VALUE': ' #COLUMN_ALIAS #'}}); *

  Alias_de_colonne is the name of the column you want to set the element with the value.

  Published by: 814948 on November 23, 2010 08:46

• How to pass the value of the run-time file .sh by Oracle procedure

  I have a file test.sh that contain

  #1/bin/bash

  exp test/test@orcl file=/home/oracle/dump/test.dmp log=/home/oracle/dump/test.dmp grants = Y = index constraints Y = Y = (test) owner statistics = none

  Exit 0

  I craete a work called Create_job_proc in this work, I want to pass the value of job_action is the location of the file test.sh to

  /U01/home/Oracle/dump/test.sh and want to spend the test/test@orcl as a variable...

  Please suggest me... how to pass the value of Job_Action which will replace the .sh file content test/test@orcl to the value of the time of execution as scott/tiger@hr

  Thank you much Parth... It works perfectly...

  Thank you all for your help...

• Passing the value of the where clause with the page

  Dear friends,

  I have a requirement like when I select a selection list value I should pass this value to sql query where clause without submitting the page

  ex I have a select like: P1_Dept guess I selects the value 10 in this

  then I have a query select * from emp where deptno =: P1_Dept.

  DB. ORACLE 11G

  APEX 4.1.1.00.23

  is this possible? can someone help me please in this topic

  Thanks and greetings

  Vballeda

  Suppose we have the selection list with the name P1_DEPT and query for report

  select * from emp where deptno = :P1_DEPT
  

  We create dynamic Action on the evolution of the P1_DEPT point. We will need two real actions:

  1-> set value action

  Set the Type - > body of the PL/SQL function

  The function of body - > return 1;

  Page item to submit-> P1_DEPT

  Change to delete-> Yes event

  Selecttion Type-> trigger element

  2. action-> Refresh

  Selecttion Type-> region

  Region-> your region of report

• Passing DB values to the text based on the Select Value box

  Hello
  
  I'm very big thing back to the Oracle APEX. In my project, I have a requirement in which I need to pass different values for the corresponding text boxes on a different page based on the value I select in the item "Select Value".
  
  I tried using processes calling for demand, but could not get the desired result.
  
  Please suggest!

  Hello

  Can you repeat your scenario on apex.oracle.com? It will be easier to fix it this way.

  Kind regards

• Demo: by passing the value of the point through 'Session invalid URL' does not

  I've created a demo for this problem on apex.oracle.com. All links point to applications created it so you can try it yourself.
  
  I have two requests:
  -* 47324 * is the application of 'work '.
  -* 47326 * is the sign in application
  I want them separate, because I'm going to add more applications 'work' in the future and I want to have a single login for all applications.
  
  When a user accesses the demand for work before I do, I want to put a value to the point of application MYPARAM. This value will be needed during the login process and will be different for different users. The URL of the user's request looks like this: http://apex.oracle.com/pls/otn/f?p=47324:HOME:MYPARAM:789
  
  When a user clicks on this link, it is not yet connected and so for the 'invalid URL Session"the scheme of authentication of the application, which is set to" f? " "p =47326: LOGIN: & SESSION.: APP_ID_REDIRECT, INVALID_SESSION_ID,MYPARAM: & APP_ID, & SESSION,& MYPARAM."
  As you can see, I'm moving the value of MYPARAM to the SIGN in application - and that's my problem - the value passed to MYPARAM is always zero (click on the link above and try).
  
  APP_ID_REDIRECT indicates APEX to redirect this application after successful login. For purposes of testing the "Invalid session ID" is also passed to the sign in application.
  You can see (shown on the login page) as the invalid session ID and the ID of current session are different! I suspect that is the reason why the value of MYPARAM is not passed.
  
  So my question is: is there a way to convey the value of an element via the 'invalid URL Session?
  
  
  I know, there is a solution to this problem by offering users the URL directly to the sign in application (http://apex.oracle.com/pls/otn/f?p=47326:LOGIN:APP_ID_REDIRECT, MYPARAM:47324, 789). I ask this just out of curiosity.
  
  
  Thank you
  Swear
  
  Published by: Jure2 on August 21, 2009 10:57

  Swear,

  When the Session is not valid URL is parsed and ' redirect to ' there is no session state containing the item such as values for & MYPARAM. because it has not yet been the opportunity to set session state.

  Scott

• Report query and Report Layout (shared component): apex oracle 5.0.0.00.31

  Create a report based on the report query to print pdf based on the FO (working according to need) file and file Fo

  < br >

  what I did: < br >

  I created 2 layouts (different ) and report 2 (query will be even created a second report query for a different layout () query based on a different company

  How it works:

  I created a "print key" on the page where I want to print pdf if the user click on pdf will generate.

  Now I don't want to create several buttons printing is possible where I can change the report layouts changed so user which is part of the same company will have the same layout and users of the other company can have different page layout.

  As:

  User 'Mike, Sam, John, AEC, kiran' company 'Apple' will have the same layout and user of society 'Orange' will have different page layout by clicking on the "print" key.

  Demo on apex.oracle.com

  new_b/new_b/apex

  User1: new_b/apex
  User2:new_b1 / apex

  Application: New (62658)
  Page: Home

  Two queries to report in shared components.

  Not an employee and the other for the name of the employee.

  Report query:
  Report1 and I2 are created depending on the generic report.

  So all preceding should connected and click on the button "print" on the home page and PDF must be different.

  I hope it's good.
  

  created a function based on wwv_flow_shared_queries the table that will store the Id and the name of the report query.
  Why do I need to create a function! --> Name of the query will be converted into number if you check branch report request = "number of queries"(i bien qu'il le convertit!!!) ". In fact the Tangible will be stored in the Table and the Id of the named query report will be send back and id will be used in the branch. (Confusion between :))
  Now, consisting by using the value
  Select distinct to_char (component_id)
  of apex_developer_activity_log
  where application_id = flow_id
  and component = "report Query.
  and the name of the component = "name of query.
  you get the name of the query and the Id now use in function get name based on the id.

• Apex Oracle 5.0 - download

  Hi all

  (1) I loaded the template file to .csv files on behalf of the table called Temp.

  My requirement, I am trying to download the data blob to the loaded file.

  https://Apex.Oracle.com/en/APEX_TEMP?p_file=100

  created procedure code:

  create or replace

  PROCEDURE apex_temp (p_file in number) AS

  v_mime VARCHAR2 (48);

  V_LENGTH NUMBER;

  v_file_name VARCHAR2 (2000);

  Lob_loc BLOB;

  BEGIN

  SELECT MIME_TYPE, BLOB_CONTENT, FILE_NAME DBMS_LOB. GETLENGTH (BLOB_CONTENT)

  IN lob_loc, v_file_name, v_mime, v_length

  TEMP

  WHERE FILE_ID = p_file;

  owa_util.mime_header (nvl(v_mime,'application/octet'), FALSE);

  HTP.p ("Content-length: ' |") v_length);

  HTP.p ('Content-Disposition: attachment; filename = "" | ") Replace (Replace (substr (v_file_name, InStr(v_file_name,'/') + 1), Chr (10), null), Chr (13), null). '"');

  owa_util.http_header_close;

  wpg_docload.download_file (Lob_loc);

  end;

  When I run this URL -https://apex.oracle.com/en/APEX_TEMP?p_file=100

  FILE will download, my question here do not have to download, error you are not authorized to access the requested resource.

  Please help me to solve this... apex 5.0

  Hi Mike-Oracle,

  Gwendoline-Oracle wrote:

  I'm facing another problem with tablur form-> formof 5-Tablur Apex

  can you please help...

  Passes by the wire. The solution suggested by Ramani_apex is what I would have suggested as well.

  If this is not what you want, then re - produce your question on apex.oracle.com and share the credentials from the workspace.

  Kind regards

  Kiran

• By using the link in the column to pass column values

  Hello

  I have a link to the column in my report which opens a modal page, now I want to use the value of the column clicked in the page that opens.

  I don't want to put any article on the opening page of the column value of click rather I want to use the value of the column of the click in my sql query.

  for example:

  1 P1 has the report < column link by clicking on it opens P2 >

  2. on page 2, I want to use the value of the clicked column.

  So far, I did

  1 link to page 2

  2. ask - #column_value_clicked #.

  3. in the sql query, I use the same above in the where clause.

  Any help...

  Thank you

  Rakesh

  fac586 wrote:

  Sunil Bhatia wrote:

  Hi Rakesh,

  Make use of x 01 parameter included in apex 5.0

  You can create a URL to page 1 as:

  f? p = 103:1:3241341234123: & x 01: #column_value_clicked #.

  Make use on request P2 in the form:

  Select * from test_table where id = APEX_APPLICATION. G_X01;

  You have not tested who, did you?

  I tested it buddy.

  Link https://apex.oracle.com/pls/apex/f?p=56971

  Click any bar chart and then wait that he freshen up.

  Click on report of ENAME and see that he went through the parameter.

  Report URL: f? p = 56971:2: & APP_SESSION. : No.: & x 01 = #ENAME #.

  -Sunil Bhatia

• Apex Oracle 5.0: I have a form in which I want to create a ClickableLink.

  Hello everyone

  I use Apex Oracle 5.0. I am trying to create a clickable link in the form of the apex. All values from a table. Based on the element of selected field I have to redirect to a specific Client press page on the special link.

  Oracle_id:1 <---(valeurs numériques viendra de table donc il changera comme 1,2,3,4, etc)

  now I need 1 to be related, so whenever I click on it, it redirect me to another form.

  Thank you

  Pranav shah

  Text of the pre element:

  After the text of the element:

  That's what I did to get my fix.

• Pass the value using javascript:modalpage()

  Hello

  Apex 4.2

  I need to know, is it possible to do the following.

  I have 4 buttons on the page as (Suspend, end, restoration, Add) and whenever you press a button and then MODAL_REGION will appear and I m using this javascript:openModal('Open_Page');

  within the action of the button - URL redirect for all the buttons. I did not create DAs for it as I create four DAs for each button.

  So my question is? I can pass the value in the code above. like javascript:openModal('Open_Page'); $s(P6_ITEM1,'S');

  
  

  but above does not work. I can just do a few DAs for him but don't want that for all buttons. Thus, when the press "SUSPEND" button hidden point P6_ITEM1 should take the of ' as a value, if the press which ENDED then take 'E' and so on.

  Please advice?

  Thank you very much.

  RI

  Hi Irha10,

  There is no need to use a DA to pass values to it. In the redirect URL

  javascript:$s('P6_ITEM','S');
  openModal('Open_Page');
  document.forms[0].P6_ITEM.focus();
  

  Hope this helps

  Kind regards

  Benjamin.

• How can I pass a value to a variable binding in a report query?

  I did a query of report to print a PDF report, with a dinamyc source query that has a connection variable, like this:

  SELECT EMPNO, EMPNAME, EMPDEPT

  FROM EMP

  WHERE EMPNO =: PARAMETER;

  I want to call the report print directly from a page, by using the url print showed by apex:

  f? p = & APP_ID.:0 : & SESSION. : PRINT_REPORT = MYREPORT

  How can I pass the value of the variable binding: PARAMETER using this URL?

  I don't think you can use the url parameter passes in a report query.

  the binding variable: PARAMETER must be a page element or an element of the application.

  use the "include session information and application" in the defination of report query to bind the value when the report is run

• Pass the value modal page using static URLS

  Hi guys,.

  I have a simple page with three boxes.

  When one of the check boxes is selected, I want to draw a new page which I use as a modal page (SkillBuilders Modal plug to help).  I need to pass a value of a checkbox (P1_WTD_OPT_OUT) in the new modal page.

  I have the following in the static URL

  f? p = & APP_ID.:2: & APP_SESSION.:2:P2_WTD_ID, P2_WTD_OPT_OUT: & P1_WTD_ID, & P1_WTD_OPT_OUT. :

  where I'm moving the value of P2_WTD_OPT_OUT to P1_WTD_OPT_OUT.

  As I don't submit anything when the check box that calls the modal page is checked, how I would pass the value in the modal page?

  At the moment, if P1_WTD_OPT_OUT is enabled or not, P2_WTD_OPT_OUT is always null when modal page.

  I use apex v4.0

  Any help would be great,

  Thank you

  Here is what goes wrong:

  -page is first rendered, P8_WDT_OPT_OUT is NULL

  -the static url for the modal lov is generated. Given that the item is NULL value in the url for the P9_WDT_OPT_OUT point shall be void in this url

  -l' change event fires. The P8_WDT value is stored in session state

  -the modal opens and navigates to the static url

  End result is that the P9 indeed will be null.

  The solution to this is to not not to set the value of the item through the URL, because it will simply not work. But given that the element of P8 is located in session state, you can use the value of it to the default value of the element on P9.

  On page 8, I changed the dynamic action to not set the value of the element in the URL, and on page 9 I changed the default value of the element.

• Pass the value to the process of request through javascript

  Hey everybody,

  I am currently struggling with the call to an application process and passing a value to it through javascript. Ideally, my javascript is triggered by a dynamic action, which itself is triggered when a user changes the value of a selection list. Below is the javascript code that is relevant:

  for (k=0; k<active_array.length; k++){
        var request = new htmldb_Get(null, &APP_ID., 'APPLICATION_PROCESS=CAL_COLORS', 0);
        request.add('x01', check_array[j]);
         var ajaxResult = ajax.get();
         alert(ajaxResult);
        active_array[k].parentNode.style.backgroundColor=document.getElementById('P14_TEST_COLOR').value;}
  

  And she calls the application process is also shown below:

  declare
  v_color varchar2(20);
  begin
  select color into v_color from cal_colors where other_user = apex_application.g_x01 and user_id = :USER_ID;
  :P14_TEST_COLOR := v_color
  end;
  

  The issue seems to be that online 03 my JavaScript, especially since my array element is not spent properly in my process. In an attempt to debug this, I added the alert message, however, instead of any relevant information, the alert shows just the HTML page! I'm at a loss as to what I'm doing wrong here, so if anyone has any input, I would very much appreciate it.

  Basically, you need to rewrite in the http buffer, using htp.p:

  DECLARE
    v_color VARCHAR2(20);
  BEGIN
    SELECT color
      INTO v_color
      FROM cal_colors
     WHERE other_user = apex_application.g_x01
       AND user_id = :USER_ID;
  
    htp.p(v_color);
  EXCEPTION WHEN no_data_found THEN
    htp.p('white');
  END;
  

  You could potentially make it much more efficient also. At the present time you loop on what is probably an array of elements, so from a tabular form probably. Rather than call an ajax for each line, you can group together them and make a call.

  Example:

  JS, you can use this to create an array with values to be placed on the server:

  var lArray = [];
  $("input[name=f03]").each(function(){
  lArray.push($(this).val());
  });
  

  And you can use the apex.server.process api to call a process on demand:

  apex.server.process("MYPROCESS", {f01: lArray}, {success: function(pData){console.log(pData);}})
  

  As you can see, the table with the values is put in the table in the f01. You must use the option of success well since it will be asynchronous (htmldb_Get.get is a synchronous call).

  With respect to the CLASS code:

  DECLARE
    l_return VARCHAR2(4000);
  BEGIN
    FOR i IN 1..apex_application.g_f01.count
    LOOP
      l_return := l_return || '"VALUE' || i || '",';
    END LOOP;
  
    l_return := RTRIM(l_return, ',');
    IF l_return IS NOT NULL THEN
      l_return := '[' || l_return || ']';
    END IF;
  
    htp.p(l_return);
  END;
  

  It will loop through the items in the table-f01 and build a new JSON notation and write it back to the http buffer so it returns to the client. It will look like this:

  ["VALUE1", "VALUE2", "VALUE3", "VALUE4", "VALUE5", "VALUE6", "VALUE7", "VALUE8", "VALUE9", "VALUE10"]
  

  I say this because when users use your application, you do not want such a quantity of calls. A single call by treatment action would save a lot of resources. You may have to loop twice on your items to apply your backgroundcolor, but I don't voluntarily not too mention jQuery since you is perhaps not familiar with it and get scared by him.

• How to pass multiple values of payload through the contextual event - jdev 11.1.2.3

  Hello:
  
  How to configure contextual events publish several values of payload?
  
  On click of a button, I'm declaritively publish a contextual event, which works very well when a single value is passed to the event handler.
  
  My event handler method has the signature of:
  eventHandler (String)
  
  But now I also have an oracle.jbo.domain.Number, so my new eventHandler looks like this:
  eventHandler (Number, String)
  
  How to pass two values during editing of the event and how to place the payload with multiple values for the new eventHandler?
  
  All article or code would be greatly appreciated.
  
  Thanks for the help.

  You define a bean holding your values and pass an instance of the bean as a payload...

  Timo