Pass an argument of jsx external to the html Panel?

Similar Questions

• Filter low pass analog (anti-aliasing filter) external to the NI USB 6251 housing

  Hello everyone!

  -I m trying to acquire an analog signal of tension (high frequency content) using a connected to an edge NI USB-6251 BNC-2110. I learned in this Labview Forum that NI USB-6251 has no analog low-pass filter programmable (or anti-aliasing filter), so that I can't help but jitter when scanning my signals. For my application, the cutoff frequency of the analog low-pass filter must be equal to 100 kHz or MORE (maximum of 500 kHz). A possible solution to solve my problem, would be to work with an external analog low-pass filter before you scan the voltage signal. Based on this I'd like to know:

  (1) national Instruments develops analog external filters? I need a filter which also has one output, analog, so that I could send also the low-pass analog filter filtered signal to my NI USB-6251 box to scan correctly it!

  (2) what model of external low pass filter would be compatible with the NI USB-6251 housing?

  Any help would be much appreciated!

  Best regards!

  Hello

  all high resolution of the M series (628 x) cards are equipped with a filter low pass which can be enabled or disabled programmatically. For the anti-aliasing filter feature, examine the boards of National Instruments DSA (dynamic signals Acquisition) acoustic and vibration measurement
  currently the NOR 9221, 9225, 9227, 9229, 9233, 9234, 9235, 9236, 9239 and 9237 C Series modules feature anti-aliasing filters. These modules are intended for the high accuracy measures for which anti-aliasing filters are a necessity.

  Houssam Kassri

  OR Germany

• Events of keyboard only reaching no not the HTML Panel

  Extension dear Community Builder.

  I'm developing an HTML extension that contains a text Codemirror Editor. The problem, which is huge in this case, is that Photoshop intercept keyboard events. They reach my Panel, or my textarea or Codemirror object. This makes it unusable concept of whole text editing. Even the keys CTRL + Z (UNDO) does not work, not to mention all other useful keyboard shortcuts. As I can see, PS getting the command CANCEL even when im in the area of the Panel. PS intercept events and it is pixel editing, which is funny, but not too useful in my case tasks.

  What is the right way to tell Photoshop: l pleaseand manipulate me the keyboard for a while! Later you get it back, when I was finished with the script of typing. ??

  Thanks for reading and responding in advance.

  Oliver

  No good news I'm afraid. Tab behavior was a long-term problem to fix in each application separately and it took some time to developer complaints to fix. And partly it is probably expected behavior, that is the envy of Adobe Photoshop shortcuts to be global so that the panels can not divert focus (same as Adobe panels). As far as I know, there is no way that you can change you may need to think about how to deal with it.

• Is it possible to pass an argument to the function triggered by an event handler?

  Hi all
  Try to migrate my way of thinking in AS2 to AS3/CS4.
  OK, I have 2 buttons on the stage. Each button almost did the same thing, so I want to create a unique function, and each button calls this function even (we'll name this function 'Navigate')... However, the function will have to end up doing something different dependent on which button was clicked.
  If, previously, in AS2, I would have added the code on the buttons themselves with methods we (release) (see the SAMPLE CODE 1)
  
  Thus, each button calls the function efficiently navigate and transmits a different image to the function tag.
  Now, I try to recreate this feature in AS3. As you know, it (release) has been abolished (still do not know why), but we must now use event handlers, so I'll try to find a way to pass a different image to the function label argument to navigate. Currently, I can achieve that by using a switch statement to test which button has been clicked and act accordingly (see the SAMPLE CODE 2).
  
  In this simplistic example, this works very well, but in the real world, I have more than 2 buttons and the function navigate would probably much more complicated...
  So I would be able to pass an argument (as in the AS2 example) to the function to navigate... maybe in the addEventListener() method? I tried, but got compile errors (see the EXAMPLE CODE 3):
  
  The issue of the $ 1 Million:
  Is it possible to pass/change dynamically an argument to a function that is triggered by an event listener? (Or is the event that triggered the function the only argument you have?)
  If this is not possible, I would like to hear how you people it would handle (other than to have a switch with 12 cases in there)?

  I found a few solutions that I'll post below for prosperity...

  You can create a dictionary indexed by the targets of future events and store information in there you want to associate with them. Then the Navigate function check that the dictionary to get its parameters:

  Code.
  Button1.addEventListener (MouseEvent.CLICK, navigate, false, 0, true);
  Button2.addEventListener (MouseEvent.CLICK, navigate, false, 0, true);

  var buttonArgs:Dictionary = new Dictionary();
  buttonArgs [Button1] = "FrameLabel1";
  buttonArgs [Button2] = "FrameLabel2";

  function Navigate(e:MouseEvent):void {}
  gotoAndStop (buttonArgs [e.target]);
  }

  This to me, is about the same amount of work than writing a long, but a bit more elegant switch statement, I guess.

  I had a little trouble understanding the following solution, because I did not quite understand important information about event listeners. The addEventListener () method requires a function as the 2nd argument passed to it.
  It didn't quite click on until someone reminded me: Navigate is a function... Navigate("FrameLabel1") is a callfunction...

  So by writing simply navigate, I'm not actually calling the function when calling the addEventListener method, I'm just providing the event with a reference the name listener. Then, when the listener is triggered, the listener will call (and pass a MouseEvent argument to) navigate the function.

  Conversely, by writing Navigate("FrameLabel1") as 2nd argument, the event listener trys to run the function navigate both the addEventListener method is instantiated. And, since then, in this example, the function navigate returned as ": Sub" a compilation error would occur because as I said, an event listener requires a function as 2nd argument data type. This would be essentially as written addEventListener (MouseEvent.Click, Sub, false, 0, true)
  However, there is a way to get around this... basically, instead of setting the function navigate as returning an empty data type, you define a function to return data type and then nest another function (which actually contains the actions you want to run) on the inside.

  Button1.addEventListener (MouseEvent.CLICK, Navigate ("FrameLabel1"), false, 0, true);
  Button2.addEventListener (MouseEvent.CLICK, Navigate ("FrameLabel2"), false, 0, true);

  function Navigate(myLabel:String):Function {}
  return function(evt:MouseEvent):void {}
  gotoAndStop (myLabel);
  }
  }

• How to pass an argument of javascript to java extension

  Hello, I have an application running with a Java Extension.

  For the course of time, I only call some java extension methods (ScriptableFunction, but now, I have to pass the variable javascript (arguments) to the extension.

  I call a method with:

  // In: public final class MyCamera extends ScriptableFunction
  
  public Object getField(String name) {
  
      if (name.equals("getImage")) {
       return callGestorCamera.pushUICameraSnapshot();
      } 
  
      return new String("do nothing");
  }
  

  and javascript :

  function getImage() {
      var name = mycamera.camera.getImage;
      return name;
  }
  

  and run correctly.

  But now I have to pass one argument, as some URL, and I don't know how to do.

  I try to move the handful of Java class to Javascript, something like this:

  // In: public final class MyCamera extends ScriptableFunction
  
  public Object getField(String name) {
  
      if (name.equals("getImage")) {
       return callGestorCamera.pushUICameraSnapshot();
      } 
  
      if (name.equals("getObject")) {
       return callGestorCamera;
      }
  
      return new String("do nothing");
  }
  

  and javascript :

  function setUrl(url) {   var handle = mycamera.camera.getObject;        handle.setUrl(url);
  
      return true;}
  

  but is not running and try:

  mycamera.camera.getObject.setUrl(url);
  

  but does not work.

  What is the way?

  Thank you!

  I believe that the Extensions lab shows how to pass a parameter to a function... For example, he spends the duration of the vibration.

  http://NA.BlackBerry.com/eng/developers/devbetasoftware/Lab_Widget_Extension.zip

• Including several JSX files in the Panel

  I am trying to include several JSX files with my Panel and I followed this blog by Davide Barranca post:

  http://www.davidebarranca.com/2014/01/HTML-panels-tips-2-including-multiple-jsx

  External scripts are all evaluated very well, but when train to call one of the functions in one of these scripts, nothing happens:

  main.js

  csInterface.evalScript("externalFunc()");
  

  External.jsx

  /*jslint vars: true, plusplus: true, devel: true, nomen: true, regexp: true, indent: 4, maxerr: 50 */
  /*global $, Folder*/
  
  
  function externalFunc(){
      alert("yay - loaded additional external JSX");
  }
  

  It may depend on how you write your functions in the secondary jsx.

  var secondaryFun = function(param) { ... } // fails
  function secondaryFun(param) { ... }  // fails
  secondaryFun = function(param) { ... }  // works
  

  In addition, using the #include in the main .jsx a Panel causes a script error every time, but or may have the #include in a secondary .jsx file called from the hand through evalFile() and it will work.

  Madness of jsx inclusion here.

  Davide Barranca

• Run script .jsx and/or the Actions button in HTML extension?

  Hi all

  I'm quite a novice at things .js, .jsx, and HTML.  I use scripts of JSX one former co-worker created and Photoshop actions for many years.  I looked through and have managed to modify the JSX scripts with a few minor changes, but that's all.  Using the Configurator, I created a custom for use in CS6 Panel.  We are moving finally CC2015 team and I'm the only person in our team who has experience and/or desire to convert compatible with CC 2015 Configurator easily created CS6 bench.  I got all of the HTML developed, interface extension runs within Photoshop and I have the buttons either launch an alert or by creating a new document in Photoshop.  The function of coding was all found code.  Now I need to figure out how to make these buttons work our various actions and some to run our scripts JSX.

  
  Configurator makes it is easy to select a button and tell it to perform an action or launch an external script file.  Is there an easy way to do this now using actions and JSX files that we have already created?

  And just a reminder, I'm a NEWB, so take it easy on me... if possible. In addition, it is only a sign used internally so I need power to market/sell it.  This is specific to our company of workflow and needs.

  Thank you!

  SMM

  for stocks, you can use this command

  ---

  Application.doAction (action: string, to: string)

  Object Adobe Photoshop CC 2015 library

  Playing the action specified in the Actions palette.

  Action: Data Type: string

  The name of the action to play. (Note that the action name is case-sensitive and must match the name in the Actions palette).

  of: Data Type: string

  The name of the action set that contains the action being played. (Note that the defined action name is case-sensitive and must match the name in the Actions palette).

  ---

  Make sure they are loaded in photoshop

  Another way is to convert action scripts (I see people often using this tool http://www.tonton-pixel.com/blog/scripts/utility-scripts/convert-actions-file/)

  and run the scripts, you put them on the .jsx file, where they will be evaluated, if you used standard mat and then call them by the name of the function

  I suggest you check out the samples, if you still have questions

• How to pass an argument to a standalone java class JDeveloper

  For the experienced:
  
  In JDeveloper when you write a java class with a main() method that takes no arguments, you just click with the right button on the java file and choose run to run the program. But suppose the main() method takes arguments, how to move your arguments to the program? This is especially a problem I use the studio version of JDeveloper (10.1.3.4 and 11.1.1.3 Versions) that each uses the version of the JDK included with, rather the JDK (which is yet another different version) installed at the level of the OS on the PC.
  
  Thanks a lot for your help!
  
  
  Newman

  Hello

  If you mean how to pass arguments in JDeveloper:
  Tools > Project Properties > run/debug > change the default run Configuration (or create a new) > settings start > program Arguments - here you can set arguments

  Kind regards
  Branislav

• Passing in arguments of js-> as3 via ExternalInterface

  Is it possible to use javascript to call a method in as3 and pass in an object argument? This would act as a setter in a way...

  Thanks in advance for any advice!

  You would use ExternalInterface.addCallback("IsStatic",IsStatic) to save a JS function call:

  // AS
  // register call from Javascript
  ExternalInterface.addCallback("callFromJS", callFromJS);
  
  // display the message from Javascript
  function callFromJS(s:String):void
  {
      textfield.text = s;
  }
  

  Call from the JS:

  // JS
  flashObject.callFromJS("Hello from JS");
  

  You may need to define true allowScriptAccess in the HTML embed code.

• Passing multiple arguments to a CFC

  Currently, I connect to Coldfusion with a RemoteObject and pass a single argument. Is it possible to pass multiple arguments? Just add a comma separated by the argument list in the parens competence does not seem to work.
  
  "" < mx:Application xmlns:mx = ' http://www.adobe.com/2006/mxml ' layout = "absolute" creationComplete = "initApp (event)" >
  
  -Block of Script.
  
  private void initApp(e:Event):void {}
  chartmth_RO.qMonthlyUsage (200804);
  }
  ----
  < mx:RemoteObject id = "chartmth_RO" showBusyCursor = "true" destination = "ColdFusion" source = "usagecenter_local.cfc.charts_usage_mth" >
  < name mx:method = "qMonthlyUsage" result = "get_Result (event)" / >
  < / mx:RemoteObject >

  Once more I am kicking. You can pass multiple arguments in a CFC using a comma separate list the key is to encapsulate each string between apostrophes. So let's say I want to pass the arguments saleschart, fiscal year 2008, 300. The inside of my call parens jurisdiction would look like ('saleschart', 'exercice2008', 300).

  I love it when an answer is revealed, but I hate when it seems so simple.

• Stopped drives D, E and F (all 2 readers CD/DVD internal F = external) with the tab 'Surely remove Harware' now I ca get one of them to run. How can I get back them?

  I tried to disconnect and reconnect the drive F, which is external. The Bell recognizing this may sound, but when I click on 'My Computer', the icon is not there.

  and if I try to see the disc content, I don't see, because there is no icon. Help, please!

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

• file transfer windows backup wps7 Windows 10 using the hard disk external. The files are zip files in windows 10

  How to open the files transferred from one computer to another computer using hardrive external. The

  host computer contains windows 7 wps writer and destination 10 windows computer. The files are zip compressed files.

  Essentially, just drag the files from the external hard drive to your new desktop computer (or another folder) and double-click it to open the file.

  Don't forget, you must install the program that reads that kind of file.  If it's a RAR compressed file, for example, your new computer will not have software to open it again. You will need to go download the compression program to open it first.

• Dreamweaver CS6 when connecting it to the external style sheet, it doesn't affect all the html page.

  Dreamweaver CS6 when connecting it to the external style sheet, it doesn't affect all the html page. It started to happen after upgrading to mac osx elcapitan.

  have no idea how to solve this? now I write all my css stylesheet in the head section of my html page.

  Thanks for help

  Best regards

  the problem has been resolved.

  I forgot to write rel = "stylesheet", that was the problem.

• upgrade windows vcenter 5.1 with oracle external to the appliance database virtual 6

  Hey people,

  We have a Windows external Vcenter 5.1 with an oracle database server. We would like to upgrade to an appliance Vcenter virtual v6 with an external oracle database. I was not able to find much info on this since most posts and blogs are based or sql.

  Is it as simple as deploying a new installation of a Vcenter virtuall device v6 and then connect it with our database current oracle and move virtual machines and turn from the old Server 5.1?

  GR,

  Michiel

  Welcome to the community,

  You can not skip vcenter windows 5.1 with oracle external to the appliance database virtual 6. You can improve windows vcenter 5.1 with oracle database external to vCenter windows 6.0 with external oracle database.

  From now officially VMware does not support migration from Windows to vCSA. But it is adventure, you can explore more

  https://labs.VMware.com/flings/VCs-to-VCVA-converter

  Concerning

• How to pass variable from bean to resourceID for the document map?

  Hello experts, I have added WebCenter workflow Microsoft document explore task in my ADF which as a parameter called resourceId.   I want to pass variable bean to this setting, because the content ID (doc name or ID) are determined dynamically.

  When I provide ${"UCM57Server #dDocName:1379596941565_CONTACT_OPTREGI"} as a resource in the expression ID, it works very well.    But samething if I attribute to a bean bean variable and entitlement in the form ${sessionScope.MyBean.docName}, it evaluates the variable bean in the form ${"UCM57Server #dDocName:1379596941565_CONTACT_OPTREGI"} and then below throws the exception:

  [2013-10 - T 02, 14: 34:50.369 - 04:00] [DefaultServer] [WARNING] [WCS-07219] [oracle.webcenter.doclib.internal.view.backing.ContentProvider] [tid: [ASSETS].] [ExecuteThread: '10' for the queue: "(self-adjusting) weblogic.kernel.Default"] [username: anonymous] [ecid: d50192415c689920:-7d97126c:1417a5d6a49: - 8000 - 000000000000008 a, 0] [APP: CreateContactWSProxy] invalid parameter combination: the login name specified by resourceId = ${"UCM57Server #dDocName:1379596941565_CONTACT_OPTREGI"} is not specified in the parameter connectionName = UCM57Server.

  Variable bean is defined as:

  private String Nomdoc = "${" UCM57Server #dDocName:1379596941565_CONTACT_OPTREGI "} ;

  Please give me some advice on how to pass the value to resourceId dynamically via the variable of bean.

  Thank you.

  private String Nomdoc = "UCM57Server #dDocName:1379596941565_CONTACT_OPTREGI";

  Without $ {}