Events of keyboard only reaching no not the HTML Panel

Similar Questions

• Anyone know why I have some formatting issues with my Tablet and phone of the sites? I only have the layout of office. There are banners and footers only reaching is not the edge of the screen.

  I only have the layout of office. As I had problems with the phone and Tablet page layouts. However there are are the banners and footers only reaching is not the edge of the screen. This is only a problem when accessing the site via a phone or a tablet.

  the site is www.excellententertainment.biz

  See you soon

  Hughie

  Do a Select all on your pages (most likely a master page is it effects all pages) and you'll probably find an empty element or element that goes beyond the edges of the design to the design of your office.

• Pass an argument of jsx external to the html Panel?

  Hello world

  Can you please tell me if it is possible, somehow, to listen to the event of jsx externally in html Panel? What I'm trying to do is to move a JSX argument to the HTML Panel and update

  the Panel with her.

  Thank you very much

  Sergey

  Hello Sergey!

  What I was suggesting private to you (I report it here for the sake of others) is to use the technology of CEP5 as soon-to-be-released: http://blogs.adobe.com/cssdk/2014/04/introducing-cep-5.html

  Especially, the part that says:

  Call of ExtendScript in HTML DOM: most Adobe applications currently supported (including but not only CC of Photoshop and Illustrator CC) will include a new ExternalObject that provides an API that allows developers to send ExtendScript events in JavaScript/HTML5

  But we must wait for the next update of the CC apps to support!

  Concerning

  Davide Barranca

  ---

  www.davidebarranca.com

  www.cs-extensions.com

• In Photoshop CC 2015, when I switch to full screen mode (only F tap, not two) my panels often disappear (but not always) by themselves.  I exit full screen to retrieve them.

  I had this problem two major updates there is a CC of Photoshop.  The last update seemed to remedy, but with the last update major it is back.  I enter full screen often, as this is how I prefer to work and usually it works fine.  I know that the panels disappear if I press F twice, but I'm not in this mode, I'm only in the first full-screen mode.  They do not disappear immediately.  They disappear more often right after an action, for example when the action makes the Panel properties pop up, all other panels (layers, etc.) will disappear.  Sometimes press the tab brings back them, sometimes it just makes drop-down menus (file, editing, etc.) appear and disappear.  I can't be the only one with this problem, but I have not yet find a discussion on the subject.

  Someone has an idea what is the problem?

  I have an i7-4770 CPU and GPU Radeon R9 200 series running Windows 8.1

  Hi Mdentonetc,

  If this is the latest version of Photoshop and you do not have enough customize the tools Panel, then you can try resetting that default return Photoshop preferences.

  Steps to follow:

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  Lets us know if that helps.

  Kind regards

  ~ Mohit

• Clicks on links only reaching no not page

  Since the update to 10.11.6, in order to reach a site, most of the time I did click twice or several times until I get through and even then sometimes I can NEVER pass! Same keyboard connects as back do not work (I tried different mouse only in cases and even different keyboards, same problem). At first I thought it was the browser but every browser I used it I have the same thing. I can only assume that this is another one of these Apple OS Apple bugs NEVER admit having. BTW, my main browser is Firefox 48.02.

  I'm running an iMac 21.5 mid-2011 "with 16gigs of ram

  Reboot safe mode then restart normally and test. To start Safe Mode, hold down the SHIFT key at startup until the computer to initialize completely. Then restart normally and test it.

  El Capitan is very healthy, it's not a bug, but your computer there might be a problem. You can also see if there is an update of Firefox, if the problem occurs only with this browser, I'd be more worried then as OS X.

• box in JTable - event should fire ONLY by clicking on the box

  Hello
  I have a Jtable implementation and a Boolean column I have a checkbox. due to being too big for this column header field, the column is much larger than the box. the checkbox can be toggled by clicking anywhere in the field. I don't want this behavior. the value should switch only when I click on the box (the square box with check/uncheck) and not in the vicinity of the area in the empty box.
  
  This behavior is possible. the default value is active and disables the box when you click on anywhere in this cell.
  
  appreciate the answers.
  
  Thank you
  Khan

  Thanks for noticing.

  //!Not thoroughly tested!
  import java.awt.*;
  import java.awt.event.*;
  import javax.swing.*;
  import javax.swing.table.*;
  public class CheckboxInCellTest2 {
    String[] columnNames = {"Boolean(Default)","Boolean"};
    Object[][] data = {{false,true},{true,false},{false,true}};
    DefaultTableModel model = new DefaultTableModel(data, columnNames) {
      @Override public Class getColumnClass(int column) {
        return getValueAt(0, column).getClass();
      }
    };
    public JComponent makeUI() {
      JTable table = new JTable(model);
  //     table.addMouseListener(new MouseAdapter() {
  //       @Override public void mouseReleased(MouseEvent e) {
  //           JTable t = (JTable)e.getComponent();
  //           Point pt = e.getPoint();
  //           int row  = t.rowAtPoint(pt), col = t.columnAtPoint(pt);
  //           if(t.convertColumnIndexToModel(col)==1)
  //             t.getCellEditor(row, col).stopCellEditing();
  //       }
  //     });
      table.setRowHeight(20);
      CheckBoxEditorRenderer cer = new CheckBoxEditorRenderer(table);
      table.getColumnModel().getColumn(1).setCellRenderer(cer);
      table.getColumnModel().getColumn(1).setCellEditor(cer);
      JPanel p = new JPanel(new BorderLayout());
      p.add(new JScrollPane(table));
      return p;
    }
    public static void main(String[] args) {
      EventQueue.invokeLater(new Runnable() {
        @Override public void run() { createAndShowGUI(); }
      });
    }
    public static void createAndShowGUI() {
      JFrame f = new JFrame();
      f.setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
      f.getContentPane().add(new CheckboxInCellTest2().makeUI());
      f.setSize(320,240);
      f.setLocationRelativeTo(null);
      f.setVisible(true);
    }
  }
  class CheckBoxPanel extends JPanel {
    public final JCheckBox button = new JCheckBox();
    public CheckBoxPanel() {
      super(new GridBagLayout());
      add(button);
      button.setOpaque(false);
      setOpaque(false);
    }
  }
  class CheckBoxEditorRenderer extends AbstractCellEditor
        implements TableCellRenderer, TableCellEditor, MouseListener {
    private final CheckBoxPanel editor = new CheckBoxPanel();
    private final CheckBoxPanel renderer = new CheckBoxPanel();
    private final JTable table;
    public CheckBoxEditorRenderer(JTable table) {
      super();
      this.table = table;
      editor.button.addMouseListener(this);
    }
    @Override public Component getTableCellRendererComponent(JTable table,
        Object value, boolean is, boolean hf, int row, int column) {
      renderer.button.setSelected(Boolean.TRUE.equals(value));
      return renderer;
    }
    @Override public Component getTableCellEditorComponent(JTable table,
        Object value, boolean isSelected, int row, int column) {
      editor.button.setSelected(Boolean.TRUE.equals(value));
      return editor;
    }
    @Override public Object getCellEditorValue() {
      return editor.button.isSelected();
    }
    //Copied form http://tips4java.wordpress.com/2009/07/12/table-button-column/
    private boolean isButtonColumnEditor;
    public void mousePressed(MouseEvent e) {
      if (table.isEditing() &&  table.getCellEditor() == this)
        isButtonColumnEditor = true;
    }
    public void mouseReleased(MouseEvent e) {
      if (isButtonColumnEditor &&  table.isEditing()) {
        table.getCellEditor().stopCellEditing();
      }
      isButtonColumnEditor = false;
    }
    public void mouseClicked(MouseEvent e) {}
    public void mouseEntered(MouseEvent e) {}
    public void mouseExited(MouseEvent e) {}
  }
  

• First Pro exports only my audio, not the video

  I'm a beginner to this program, so please bear with me.  I'm in first Pro CC (2015.3) v 10.3, blue Fox on a PC with Windows 7 Pro. The Media Encoder is also Media Encoder CC (2015.3). When I queue to export the Audio/video file, I chose H.264 and AAC Audio.  The video and audio of boxes are ticked for export.  I have the game - high-speed selected Source and preset of Facebook.  Is the screenshot after I encoded the file, but I am able to see the process of Audio and video, while it exports the file.

  Here is the screenshot of my Premier Pro screen. I had created a couple of these slide shows before and everything worked very well.  Now for some reason, there is only Audio now.  I tried it with two series of photographs with the same results.

  Any help is appreciated and I apologize if this is a repeat problem, but I don't see anything that fits my situation specifically.

  When you are working in a new project (or new sequence) and you add the first piece of media in your timeline (sequence), if the media card to match the settings of the sequence, it will ask you "Do you want to change the sequence to match the media" and you have done this, no other way to get an image size of 4608 x 3456, which is not equal to any standard video format. Is also 4:3 and not 16:9 for the video output screen. So unfortunately, if the configuration of the sequence is bad at first, your project is built on a poor Foundation that will cause problems later when you try to export to a standard format.

  If you want to put the video on Facebook, that would be 1920 x 1080 or 1280 x 720 for instance (1080 p or 720 p). Your sequence should be created accordingly before adding any media. In Prefs or sequence by sequence, you can use the size value of the frame to have the media scale in sequence (photos/video will scale to fit the image).

  Try changing the size of the image in your sequence up to 1920 x 1080 settings. You may need to click on the pictures and also the value size of the frame.

  EDIT: also change the audio sample rate of 32000 to 48000 which is more standard and superior

  EDIT 2: If you put 4:3 pictures in a 16:9 frame, yes you get black bars on the sides. As the top and bottom of the pictures of the boat may be just the water and the sky in any case, you can change the image until it fits left to right, cropping the top and bottom which you can't miss anyway. Can also set vertically then necessary. Use the Adobe movement controls for these actions, found in the effect controls panel.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• A new email account (gmail) can be added for only new messages, not the whole story?

  I need to configure your laptop to check the email of the home for several weeks. I want to configure T-bird to endure. I would like to receive only new email, go ahead, this whole on the accounts. The last time that I set up a T-bird for Gmail account, downloading all messages that would come out on Gmail for several years.

  From the web interface, move messages from the Inbox to another folder, and then add the account as a kind of POP in TB, so that only messages in the Inbox are downloaded. IMAP by default TB when you add the account, so just click Manual.config. and enter the POP settings:

  http://KB.mozillazine.org/Using_Gmail_with_Thunderbird_and_Mozilla_Suite

• updated Windows 7, but only shows is not the cutting tool

  I have updated my windows 7 and installed again updated but it still not showing the cutting tool. I also checked control panel
  installed the program, but it does not appear Tablet PC component
   
  Please suggest me the solution

  What do you mean by "update my windows 7'?

  And if in search programs and files that you enter... Snip does not reveal the shortcut?

  Or all programs > Accesseries > snipping tool?

• Muse not registering is not the .html files

  I'm working on a site of Muse and Muse is no longer to save newly added files .html on my hard drive.

  When the site updated (after a site-save, with new pages) is open, the new files do appear in outline view, design and preview, but when I use Microsoft search, these files do not appear anywhere on the disk. It's really strange. The files must exist, because they show when the site is open, but simply could not be found on disk.

  I first noticed this behavior when an update of the site via FTP failed to deliver the new files .html or css on the server.

  What is strange, however, is that if I "export to HTML", the appropriate files are created and registered, but only in the "Muse Export" folder - and not where elsewhere.

  I uninstalled Muse, restarted, then re-installed and the behaviour continues.

  I then tried to create a new empty site with only four pages, basic navigation text and a graphic on each page. Under "file, register the site" the operation seems to behave normally, but the new HTML and css files are no where. Again, when I exported the site in html format, the files are created and saved in the MuseExport folder.

  Question: Any thoughts?

  (I also noticed that "export as html" seems to overwrite a previous export even if the domain name that I entered is different. I predicted that the prompt for the domain name in the export process would result in an export of single site in the MuseExport folder. I note that you can change the backup location of the default MuseExport folder, but I was unaware of the potential of data loss until it was all over.)

  Two question: Is there documentation somewhere, other than videos, so I can understand what Muse done before I screw up?

  See you soon,.

  Anne Jackson

  With regard to this point:

  When the site updated (after a site-save, with new pages) is open, the new files are displayed in outline view, design and preview, but when I use Microsoft search, these files appear not anywhere on the disc. It's really strange. The files must exist, because they show when the site is open, but simply could not be found on disk.

  When you create a new page in Muse, the file is kept in the Muse (YOURNAME.muse) program and will not be registered in a .html page until you export the site through the Manage / publication or file: export as HTML.

• Show only cases selected on the front panel

  I write a biomedical code to a pulse duplicator. At present, there are three methods of acquisition of temperature, user input, powered by a signal from the probe to the acquisition of data and as an image. I gave users the possibility to choose the method they want however, on my front, I can see selectors of temperature for all three methods. Is there a way to only display a control to the method chosen by the user? Thank you

  There are several ways to address the issue.  The way I'd do it is the crux of property 'Visible '.

• Why not the reference panel pop up in Dreamweaver CS6? Help!

  Whenever I go to the window-> results nothing appears in Dreamweaver CS6 (cloud version non-member). Is not an option for those who have a copy of the software?

  That's where.  In Windows, click F7.  If you do not see the Panel of results immediately, you may resize or close your tab properties panel group to make room for it.  See screenshot.

  

  Nancy O.

• Lenovo K900 - displaying only and not the contacts when I call

  Hello, I bought my K900 phone a few days ago in the shop in India. When I dial a contact or a contact trying to call me, only numbers and not the name of the contact on the phone. Help, please

  Hello, the issue of the sorted mate. I did return the contacts, remove the phone and them even once, Voila - restored to work like a jewel

• When I add a video on my calendar, it allows only the audio, not the video. It is in MOV format.

  I'm working on my first project with elements first, and when I add a video to my computer, it will add it only for audio, not the film section. All my files are in MOV format. I am able to open the same file in Microsoft Movie Maker, but not in the first of the elements.

  geigerlau

  Your specifications video camera and your lack of QuickTime presets, it's almost a certainty that the installation of the first Elements needed as QuickTime will solve your problem.

  What could be your problem is the use of a video codec MotionJPEG for your video. Your camera seems to offer MotionJPEG video codec, but only as an .avi file. The video codec that goes with the file from your camera .mov is H.264. Thus, with an extension of the .mov file, you do not have the question common to Premiere Elements MotionJPEG any version.

  Please let us know if the installation of QuickTime works for you. It should based on what I've read online on your camera and knowing the requirement of Premiere Elements for QuickTime.

  Thank you.

  RTA

• Events of keyboard in Control Panel

  There seems to be a problem with the keyboard events in the HTML panels.  No event will through the Panel, but is instead picked up by the host application.

  You can see an example of this by loading the demo of polymer paper-entry in a panel of Photoshop.

  Using a simple tag < input > works as expected, so I think that it is related to the host application verifies how focus in the Panel and that he not properly recognizing the < input > targeted in the DOM of the shadow of the paper entry.

  Please let me know if there is a solution for this?  I would like the Panel to receive events whenever the Panel is active.

  See you soon,.

  -Brian

  I have found a workaround for someone else who may encounter this problem.  I was able to override the tagName property of the WebComponent of return "INPUT".

  Object.defineProperty (myWebComponentElement, "tagName", {}

  get: function () {}

  return "INPUT";

  },

  countable: true,

  configurable: true

  });

  See you soon,.

  -Brian