Pass and user ftp erasing itself

Similar Questions

• Windows security mail request pass and user name Word and when entered correctly he keeps asking again.

  Windows Mail doesn't connect keeps security in. Center ask username and password and when correctli entered, he appears to back up again. problem started after the updates.

  Hello

  1. don't you make changes on the computer before the show?
  2. What is the accurate and complete error message that appears on the computer?
  3 update do you have?

  Method 1:
  You can solve the problem of mail for windows with the help of the link:
  Solve problems with Windows Mail
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail
  
  Method 2:
  You can also try to do a system restore and see if it helps:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
  If you use Windows live mail, then you can ask your question in the Pack Windows Live mail community forums link provided below for assistance.
  http://windowslivehelp.com/product.aspx?ProductID=15&WA=wsignin1.0

• Is there a way to recover deleted history sites? Also, a way to prevent unauthorized users to erase history?

  Is there a way to recover deleted history sites? Also, a way to prevent unauthorized users to erase history?

  You need administrative rights to do this. Be careful as it is possible to easily create a very difficult to solve waste.

  Run gpedit.msc

  Reach

  -User configuration

  -Administrative templates

  -Windows components

  -Internet Explorer

  -Delete browsing history

  Disable the feature turned on 'delete browsing history '.

  You also probably want to configure

  -InPrivate

  Disable the active InPrivate browsing

  If you use IE8; Otherwise, the user can simply avoid registering in the first place.

  Also - the browser menus

  Tools menu: Disable Internet Options... menu active

  would be a good thing; Anyone who shouldn't be allowed to delete the history of should not be also change too much in the Internet Options.

  For some reason, changes to this setting of group policy have no effect in IE6 and IE8 on a workgroup computer XP Pro.

  In fact, I would like to disable the entire Tools menu item; However, there don't seem to be any means to do.

  Run gpupdate /Wait:0

  Any user who cannot access gpedit.msc, editing the registry (regedit.exe, regedt32.exe) or mmc.exe may re-activate it now grayed out in the menu items.

  Note: mmc.exe can be activated by right clicking my computer even as a limited user. Remove or deny permissions to these files for administrator users.

  I would like to configure them on a per user or user group basis. Does anyone know of a way to do by not part of a domain?

  I know no direct way to recover deleted history sites. Perhaps, they enter the trash somewhere. They may be captured by the network of monitoring programs, even if they have been deleted from the personal computer.

• How to clean my computer of saved passwords and user names?

  How to clean my computer of saved passwords and user names?

  Original title: I'll sell my computer

  You must wipe the drive and reinstall the operating system. 
  Unless you want other snooping in your files you need more than just delete your user names and passwords from different places on the computer.

  Do not wipe the recovery partition.  The recovery partition is a small part of the disk that contains the files needed to restore the computer to factory State, see the computer user's manual or check the manufacturer support site for the from.

  Secure erase
  http://CMRR.UCSD.edu/people/Hughes/SecureErase.shtml

  Reinstalling the operating system will take care of the major PART of the problem, but to be completely safe, you may want to replace the hard drive.

• Account administrator and user, Windows 7 Premium access control problems

  We have a problem with a HP/Compaq Windows 7 Premium machine 4 months old and we cannot allow any request of the UAC.

  An account on the machine is a "Standard user" without password, but when we do something like put to day or what the icon shield it and require permission from the Admin we cannot.  The alert box will appear asking you to Admin password (with no box to type, besides whom there is no account active Admin but maybe only the Super Admin account 'hidden' which is off), but also the 'Yes' button is gray and only 'no' can be clicked.

  Support PC World were unnecessary, saying full install, their stock response.  Tried enabling the 'super administrator' hidden account think it worked once before when I need administrator rights to install the software, but as unable to run CMD prompt as administrator (again because UAC comes into play), I can't seem to do.

  So now stuck with the new machine and messing around on the fighting with the OS: s I thought rightly or wrongly that the activation of the hidden Admin account would do, I'm sure that's what I did before, but I keep hitting the problem guest UAC as described above.  Therefore, the following does not work:

  ______________________________________

  Click Start, type: CMD
  In the results, click on the right button CMD
  Click on "Run as Administrator"
  at the command prompt, type: net user administrator / active: yes

  Log off, and then log on to the administrator account
  Make the appropriate changes to your accounts

  Log on to your account
  Click Start, type: CMD
  In the results, click on the right button CMD
  Click on "Run as Administrator"
  at the command prompt, type: net user administrator / active: No.

  ______________________________________

  I tried to click with the right button on CMD prompt and checking run them as administrator on the drop down menu, but UAC prompt comes up, no luck.  Also tried setting to "Run as Administrator" when raising the properties by right-clicking... same result.

  Also tried cursing at the machine... same result: o

  Any help appreciated because I'm sure that I've done it before, and there is a way to pass the CMD prompt.

  Ah finally solved.

  HP Compaq machines have their own start to use for recovery etc. software (accessible by pressing the ESC key), so I went into the system recovery using the backup utility to make sure that the external hard drive was last week 'missing' files, and then cancelled rather than clicking on the side to supplement a system recovery.

  This gave me the traditional options of safe mode,... networks, prompt etc.  Choose Mode safe mode with command prompt and Super Administrator hidden account was visible as well as the Standard user.  Choose the account super administrator, connected, activated the password protect and define it.

  At the command prompt enter:

  NET user administrator / Active: Yes

  Restarted as Standard and UAC user now works fine.

  It all started because of a need to install Open Office and then down the line a cutting machine, interrupting a Microsoft Backup, which could not be restarted without password Admin and user access control issues as described above.

  Is not to hide the Admin user at all now!

• my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do? Thank you very much!

  my windows vista starts normally until I have pass the user coice screene. After that, I see the cursor but everything is black. What should I do?

  It was probably caused by the removal of any file system as I was scaning the pc for malware and probably deleted some important file. only safe mode works now
  and I need my computer quite urgent for the University.
  Thank you very much!

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows 7 update everytime I open Chess Titans I have to turn the Board at my side. I'm black and it opens always white, take the 1st pass and remains there unless I smile it 180 degrees

  original title: Chess Titans little Caprice

  Windows 7 update everytime I open Chess Titans I have to turn the Board at my side. I'm black and it opens always white, take the 1st pass and remains there unless I smile it 180 degrees.

  Hi Woody15380,
  
  Chess Titans walk and check if that helps
  .
  Use this link to turn off the game and then turn on again.
   
  Turn on or off Windows features
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off
  Also delete all the files in C:\Users\user name\AppData\Local\Microsoft Games\Chess Titans
   
  Aziz Nadeem - Microsoft Support

• I'm trying to publish my site using the Publish drop and the FTP host option.

  I'm trying to publish my site using the Publish drop and the FTP host option. I enter the details requested and all it gives me, it is an error message of "could not sign you [suite failed to read].» Check your user name and password'. I'm the host my site on One.com. There is no place for me to choose the 20 port (although it should use anyway) and I have spent hours on the design of Web sites and do not want to go to waste. I use a trial version but Adobe say he has all the features of the paid version, which, at this rate, I will not get! I've updated the app 12 days ago. Csomeone help?

  As the error says it's a problem with the user name and password. If your host requires that you use port 20 just add: 20 at the end of your address of the remote host.

  For example: yourRemoteHost.com:20

• How to pass the user name dynamically in file .jca Oracle Apps adapter

  My BPEL process using Oracle Applications adapter. Here is the file .jca for the adapter.  The user name is statically initialized to "sysadmin" when I created the adapter. How can I change this to move dynamically during execution? Can I use an EL Expression or a variable of XPath. If yes how and what is the correct syntax?

  Is it possible to pass the user name of the security policy of OWSM for the value of username below? If yes how? I appreciate your response.

  " < name of the adapter-config = adapter 'EBSAdapter' = 'Apps' wsdlLocation =".. / WSDLs/EBSAdapter.wsdl "xmlns =" http://platform.integration.Oracle/blocks/adapter/FW/metadata « >

  < UIConnectionName factory connections = "EBS1" location = ' ist/Apps/EBS1"UIConcurrentPgmName =" "UIOracleAppType = 'DBOBJECT' / >"

  < endpoint-interaction portType = operation "EBSAdapter_ptt" = "EBSAdapter" >

  < className = "oracle.tip.adapter.apps.AppsStoredProcedureInteractionSpec interaction-spec" >

  < property name = "SchemaName" value = "APPS" / >

  < property name = "PackageName" value = "JAN" / >

  < property name = "Procedurename" value = "GET_USER_PROFILE1" / >

  < property name = "IRepInternalName" value = "PLSQL:INTG:WEBCENTER_GET_USER_PROFILE1" / >

  < property name = value "Username" = "sysadmin" / >

  < property name = value of 'Responsibility' = "system administrator" / >

  < / interaction-spec >

  < / interaction of endpoint >

  < / adapter-config >

  1. go on the Invoke activity

  2. click on the Properties tab.

  3. click on add

  4 Add this 'jca.apps.Username' property and map with variable or expression.

  5. fill the variable defined in the previous step with valid username values during execution.

  I hope this helps.

  Kind regards

  Karan

  Oracle Fusion Middleware Blog

• How to pass the user to the current provider 11.1.1.3?

  Hello
  After I connect to Smartview in Excel by using common provider 11.1.1.3, I seem not to be able to change my login ID. It always automatically connect me as my 1st login ID.
  How to pass the user to the current provider 11.1.1.3?

  Hello

  If you right-click on the essbase server and select "Invalider SSO" and then disconnect > commune of provider connection.
  When you connect again it should ask you your login information.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Passing a user name to a web service

  Is it possible to pass a user name and password at a web service?

  Yes

• &lt; critical &gt; &lt; WebLogicServer &gt; &lt; BEA-000254 &gt; &lt; cannot pass the user "psoftusr".

  Hi all.
  
  have a customer problem with permission to userid where they get an error in the application of patches.
  
  It's customers comment:
  
  We suspect that our psoftusr of the user who starts the Web server on a port higher than 1024 doesn't have the correct permissions to start
  without getting the error
  
  August 30, 2008 9:16:41 CEST > < critical > < WebLogicServer > < BEA-000254 >
  < cannot pass the user "psoftusr". java.lang.IllegalArgumentException: cannot initgroups(3) ("psoftusr"), system error: "no owner".
  
  
  
  problem is that once I go into the Admin Console and change the settings to enable the liaison post UID.
  
  After all I change the default page I have no problem.
  
  
  CT needs to know what permissions are psoftusr must have to be able to get rid of this error message?
  psoftusr is the id used to install the software in the first place.
  
  
  so far, the file permissions are set correctly in the LDAP directory.
  
  
  any thoughts...
  Thank you
  t

  CT is about PTools 8.49 and BEA_home is not under PS_Home, it would make everything about the difference in access to this user name?
  CT does not see the House under the envsetup (UNIX) BEA? How can they add that, to be part of the env? Maybe this could be one of the reasons...
  THX

• the drive seem to have been partitioned by another utility and cannot be erased

  I have a MBP with 2 SSD. Yosemite is running on the SSD that has been partitioned 1 TB to a 150 / 850 GB volumes.

  I wanted to install Windows 10 using Boot Camp but after succesfully download Windows software support that I can not go to the next step where I have to choose a volume (Pluto). Wizard Boot Camp shows my SSD and when I chose the following warning is displayed:

  "the drive seem to have been partitioned by another utility and cannot be erased."

  I see that Pluto isn't GUID and maybe that's the problem, but there are already some data on the volume of 850 GB that I can't erase. Is there a way to fix this without destroying the data? I don't even know why Pluto doesn't have GUID in the first place...

  Thnx,

  G

  

  You have two entries 'Pluto '. The outermost is a volume CoreStorage group, which has two volumes, one is named Pluto, the other is TerraNova. The 512 GB of Samsung is your second physical disk. The Pluto in the BC Assistant is the complete LVG, not only the volume of Pluto, which contains also of Terra Nova.

  BCA does not support such a configuration on your MBP. You will need to backup your data or manually partition the disk and do a little terminal work, if you want to install Windows in this configuration. The second SSD will complicate it further. You may need to physically remove the disk non-windows in order to install Windows.

  Your end of 2011 Mac does not support Windows 10 as described in using 10 Windows on your Mac with Boot Camp - Apple support . You will encounter problems of pilot.

• Pass and fail indicator chart

  Hi all

  I have a table of pass and fail, and I want to do a graphical indicator to represent this table.  Is this an indicator bar that would take an array of pass/fail and show them as green and red on the bar.  The color on the bar must be continuous.  I want just an indicator that normally told me the % of failure in real time.

  Yik

  
  

• Calendar view-only and users are unable to change the time.

  We use Windows Server 2003 R2 active directory and group policy.

  Group Policy, we blocked sytem time change but after this timetable can also test block user cannt read calander also

  pls sugget me to resolve this issure

  Calendar view-only and users are unable to change the time.

  Hi sunil77,

  Your question about changes in UAC using Group Policy on Windows Server 2003, it will be better answered by the experts in the Group Policy Forum. Please repost your question to the address provided.