Pass the parameter page fragment in a dynamic region

Similar Questions

• How to assign components page parent of a page fragment in a dynamic region

  Hi, I am using JDeveloper 12.1.3. I have a single page request that contains a sidebar (with separator) on the left and a dynamic region on the right. One of the fragments of the page that appears in this dynamic region has a task flow that calls another fragment of page. What I do when this event occurs, it is to dynamically hide (or at least close) the left side panel. I created a bean of support that includes a method to do so. This method works very well when I call it from a test button on the parent page. But I can't understand how effectively call it a method in my stubborn workflow (page fragment). I created the method and incorporated it in the workflow. I refer to the method in the bean support. No errors are generated when I perform the navigation. I have debugging instructions that indicate support bean method is called. But the screen will not reflect the changes on the side panel. I tried to use a parent action in my stubborn workflow (and tried to have this action relative to call the method), but that did not help. I thank you very much for any assistance, you can provide.

  The problem is that you can reach the panelSplitter of off the page on which it is located. If you use a methodcall activity that you call with a parent action you get a new instance of the separator, but not then, you try to change.

  What you can try to bind the separator to a property of bean a bean view extended who resides in the workflow of the parent page. Then you pass this bean as a parameter to the flow of the task of the fragment and call the method within the bean. It of called bean reference and is listed in this article by Frank Oracle ADF May / June 2013. Make sure that you use a component for the bean property reference. On second thought, you might not even to bind the separator to the bean as you can look it up in the page directly using findComponent().

  Timo

• passing the parameter through links page (navigation)

  Hello

  suggest me the way to pass the parameter through links in the page navigation.

  I tried it in EL, I'm not able to get on the page.

  is it a right approach or any other.

  Thank you

  A

  After showing the steps in the similar thread, I found this thread then re-post here.
  

  Pass the connection parameter to connected in portal Builder page

  
  

  Here are the steps to pass the parameter in a URL to another page:

  • Add a custom attribute to the attributes of the current portal (say MyPortal1) page [link Direct: http://127.0.0.1:8888 / webcenter, portal, MyPortal1, attributes ]

  OR

  Sign in to your personalized Portal (say MyPortal1)

  http://127.0.0.1:8888 / webcenter/Portal/MyPortal1

  Click the settings (e.g. Pages & portals Actions)-> manage-> all settings

  It will take you to the page view of all of the current portal (i.e. MyPortal1).

  Then click attributes in the left pane, and you can create/edit/delete the custom attributes for the current portal on the right side.

  • Click Add an attribute and specify the following information:

  Attribute name = myvar

  This is the attribute that we will refer to any page using the EL "MyVar".

  Attribute value = #{param.myvarval}

  "Myvarval" is the name of the query parameter (i.e. suffix query param & myvarval = TestSuccess will be passed as part of the URL later)

  • Now, create a new page "TestPage" and add the element of HTML markup on the page using the composer.
  • In the Properties window, change the HTML markup element.

  Replace the existing value

  #{componentExtensionBundle.OUTPUT_TEXT_TEXT}

  with

  #{spaceContext.currentSpace.metadata.customAttributes ['myvar']}

  • Click apply and then click OK to close the pop-up window.
  • Click on save and view Portal

  
  

  • CHECK: Replace/change the URL the following OR open in a new tab in the browser

  Http://127.0.0.1:8888 / webcenter, portal, MyPortal1, TestPage ? myvarval = TestSuccess

  and you will see "TestSuccess' message in the"TestPage"rendered using the HTML markup component.

  This confirms passing the parameter to a page URL works as expected.

  Now, to add a link to the "TestPage" passing a parameter in the URL of the page in another page (Home Page say).

  • Now goto homepage, correct it in composer and add the hyperlink element. Click change to set the hyperlink in the Properties window.
  1. Set the title to display (i.e. the value of the title TestPage)
  2. Set the Destination URL by clicking on the search icon and choose "TestPage".

  Destination is defined with values that resembles

  /faces/Oracle/WebCenter/page/scopedMD/sf5926dd1_9e6a_45ab_a99c_d79fabb362c0/Page1.JSPX

  Add a suffix '& myvarval = TestWorks' to him.

  • Click apply & OK.
  • Click on save and view Portal
  • CHECK: Since your home portal or the home page, click on the link "TestPage" which brings you to the TestPage and you will see "TestWorks' message in the"TestPage"rendered using the HTML markup component.

  I hope it helps.

  References:

  How to pass a parameter of argument the query URL to a parameter input workflow? (Doc ID 1545808.1)

  https://mosemp.us.Oracle.com/epmos/faces/DocumentDisplay?ID=1545808.1

  Works with the global attributes in portals

  http://docs.Oracle.com/CD/E29542_01/WebCenter.1111/e27738/wcadm_ps_attrib.htm#WCADM11701

• Contextual table of events cannot exist in the Subscriber page fragment? 11.1.2.3 jdev

  Hello:
  
  About contextual events, all of the examples I've seen always have plan contextual event exists in the page that contains the regions that wish to communicate.
  
  A contextual event table can exist in the page subscribed instead fragment? It seems that the IDE does not support this.
  
  Example:
  
  Page 1 is a Page in the ADF
  FragA is a page fragment in TaskflowA
  FragB is a page fragment in TaskflowB
  
  TaskflowA and TaskflowB are dropped on Page1 as a region
  
  
  When the plan contextual event exists in Page1, everything seems to work ok. FragA may contact FragB.
  
  The contextual events table can be moved to FragB? While contextual events are concerned, Page1 does not...
  
  Is this possible? Do I have to just configure the contextual event card through the window of the structure?
  
  Thank you very much...

  Hello

  If you delete page 1 then you will not be able to see the events of FragA.

  However, page 1 are not necessarily a jspx or jsf, one Fragment of Page on which you put TaskFlowA and TaskFlowB as a region.

  You can try creating the event as *.

  You can check the forum where Frank helped if this can help as well for you.
  ADF contextual event

  Or you can check
  http://middlewarebylink.WordPress.com/2012/11/28/communication-between-regions-without-contextual-events-3/

  Or pass the parameter of workflow and control using the Condition of refresh.

  Thank you
  JIT

• I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?

  You can activate it without a SIM card. If it is locked, it takes a SIM card by the carrier, for it is locked. The SIM card should not be linked to an active line of service, but it must be present to activate it.

• pass the parameter in PL/SQL on UNIX "such what."

  Hello
  I need the 4 parameters of Oracle procedure through Unix Shell script...

  procedure signature :-
  PROCEDURE Builder(csvFileName OUT VARCHAR2,pdfFileName   OUT VARCHAR2, fileId IN NUMBER, csvresult OUT VARCHAR2,pdfresult OUT VARCHAR2);

  UNIX Shell script:
  BudResult=$(exec_Builder $fileId)  
  echo $BudResult | read csvfileName pdfFileName csvresult pdfresult

  Problem: 1 suppose pdffile pdfresult has Null values in the procedures of the Oracle, and unix shell will read parameters with spaces so
  I am incorrect parameter values in UNIX script.

                 
  Oracle Procedure result:                   Unix Shell Result
  csvfile = ABC.csv                         csvfile = ABC.csv
  pdfFile = NULL                            pdfFile = Success
  csvresult = Success                       csvresult = 
  pdfresult = NULL                          pdfresult = 

                 
  2. suppose csvresult has value "Userdefined Exception" in oracle procedure but Unix reads it as following
  
  Oracle Procedure result:                 Unix Shell Result
  csvfile = ABC.csv                         csvfile = ABC.csv
  pdfFile = XYZ.pdf                         pdfFile = XYZ.pdf
  csvresult = Userdefined Exception         csvresult = Userdefined
  pdfresult = Success                       pdfresult = Exception Success

  In nut shell how to pass the parameter "like what" PL/SQL in UNIX...
  
  Thank you
  Sandy

  So, what kind of problem you know now? What output do you get it?

  echo oenResult=$oenResult
  

• How to pass the parameter one form to another form?

  Hello
  
  I want to pass the parameter one form to another form called.
  
  What are the steps I want to do.
  
  Please guide me
  
  Iqbal
  
  Published by: Sabrina on July 21, 2010 23:38

  You want to see this link...

  sheikyerbouti.developpez.com/forms/Forms_Parameters.doc

• Passing the parameter of workflow with shows the http 404 error pages

  Hello

  I have a parent workflow with fragments of page deleted as a region on a page. The fragment of a page in the parent workflow displays the read-only table employees. The service Id of the table appears as a link. When you click this link, the following is provided:

  • action listener is called which calls the managed bean that retrieves this Department Id and defines in the pageFlowScope.
  • Pass this value as an input to the child workflow parameter. Child workflow contains its display type is inline-popup page.

  The problem is that when there is no parameter passed to the child workflow the popup is fine. But if the parameter is passed it gives the following error:

  ADF_FACES - 60105:HTTP error state Code: 401.

  Parameters passed from parent to child, such as:

  #{pageFlowScope.DepartmentIdBean.value}

  (DepartmentIdBean is the bean class that gets and sets the Id selected Department)

  Parameter received in the child as workflows:

  #{pageFlowScope.pdeptId}

  Can someone please help me solve this problem? Is that the path parameter is spent creating problem? The same scenario works very well if the child workflow is invoked with fragments of page and like exterior window. I use JDev 12 c.

  I looked at the code and modify it to make it work. There were a few errors. the way main reason you got the error was that you tried to read the non-existing parameter values.

  Download the app from work OTNempDeptTaskFlow.zip | JDev & amp; Goodies ADF

  After downloading the doc you rename to zip and can then decompress.

  Timo

• How to pass the parameter of column in a table of trinidad to the next page?

  Hello
  In fact, we work with trinidad tables and forms on our pages snce we will deploy to mobile.
  I saw a video shared by Shay, parameter passing between pages with adf components - the column was converted to create a link, then it a setProperty earphone is placed on the table to catch the parameter.
  How can do us same with paintings of the Trinity? I do not see any place to convert the column link, but in vain.
  I tried to use a radio button select with the table, but I do not know how to extract the value of this.
  Please provide your valuable suggestions on this.
  
  Concerning

  Hello

  If you go to the source of table view you see something like

  TR:column containing--> tr:outputText

  You would simply change the tr:outputText to tr:commandLink

  Frank

• Passing the parameter when pageloads as processRequest in OFA

  Hi friends,

  I developed a page (EmpDetailPG) to view the details of the employees. The data appearing on the EmpDetailPG uses a ViewObject that is based on a query. The query lists the details of all employees.

  However, I have to include this page with EBS. The usercontext is available now in the EBS, and when the user loads the page the usercontext of EBS should be taken and passed this ViewObject on loading the page. This will ensure that the page displays the details of the only employee who is logged. How this can be in the ADF page. Ideas please let me know.

  JDeveloper version is 11.1.2.4.0. EBS is 12.1.3

  Thank you

  Hello

  (1) you must pass the username as a parameter of workflow. And then, you will need to filter your from vo of this username. You can do it on the loading of the page. See the blog post very useful for this http://tompeez.wordpress.com/2014/08/20/jdev-12-1-3-use-default-action-instead-of-invoke-action/

  (2) you need to access the user name of the context and value as a workflow parameter. There might be some expressionLanguage which will return the username you see directions to the user of the present session in EBS

  / Context parameter that provides you with the user name, you need to workflow parameter. Refer

  http://docs.Oracle.com/CD/E14571_01/Web.1111/b31974/taskflows_parameters.htm#CHDIAIJJ

  Thank you

• Form of Oracle 10 g by passing the parameter of the forms to reports

  Hi all
  
  I work in 10g AS and have a form which is called a Menu. When we run the form he asks that the connection information. and once it is successful, then it opens a menu.
  Here in the menu, I ask a report before a form of parameter. In this setting, I have 3 userid startDate and endDate fields.
  
  It's the part of my code that executes the report.
  
  ADD_PARAMETER (PARAM_ID, 'Hogshead', TEXT_PARAMETER, USER);
  ADD_PARAMETER (PARAM_ID, 'start_date', TEXT_PARAMETER, TO_CHAR(SYSDATE,'DD-MON-YYYY'));
  ADD_PARAMETER (PARAM_ID, 'end_date', TEXT_PARAMETER, TO_CHAR(SYSDATE,'DD-MON-YYYY'));
  
  Rep: = find_report_object ('MyReport');
  vc_reportserver: = 'rep_prothonotary5_FRHome1 ';
  
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_COMM_MODE, SYNCHRONOUS);
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESTYPE, cache);
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESFORMAT, 'HTMLCSS');
  SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_OTHER,*'paramform=yes'*);
  
  v_rep: = RUN_REPORT_OBJECT (repid, PARAM_ID);
  
  Here I am able to get the report when I speak of paramform = no. As the parameters are passed directly to the form. Start date and end Date will be SYSDATE as it is in the code above.
  But I need to be as paramform = yes, so that the form of the parameter appears before the report and, I can change the settings for Start Date and End Date . When I put paramform = yes in my code, the parameter form appers, but this form of parameter, there is a button submit Querry and Reset and when to drop querry button is pressed, the page Web site can not display the page .
  
  How should I make it work?

  a possible solution is to create a simple form to let the user enter its parameters, and then call the report itself with paramform = no

• Passing the parameter to bounded taskflow with setPropertyListener

  Hi, OTN,.
  
  I can't get how to pass a parameter of ADF defined taskflow entry while I'm trying to follow the dev guide.
  
  On my JSF page in an area, I have a command button with setPropertyListener. Him his "code:"

  <af:commandButton text="newInformation" id="cb14"
                                    action="newInformation">
                    <af:setPropertyListener type="action"
                                            from="Hello"
                                            to="#{pageFlowScope.inputValue}"/>
                  </af:commandButton>

  JDev warns me that "inputValue is an unknown property.
  action "newInformation" navigates the region to a taskflow bounded, which has input parameter:

  <input-parameter-definition>
        <name>inputParm1</name>
        <value>#{pageFlowScope.inputValue}</value>
        <class>java.lang.String</class>
      </input-parameter-definition>

  Taskflow call activity has input parameter:

      <task-flow-call id="new-inf-tfd">
        <task-flow-reference>
          <document>/WEB-INF/new-inf-tfd.xml</document>
          <id>new-inf-tfd</id>
        </task-flow-reference>
        <input-parameter>
          <name>inputParm1</name>
          <value>#{pageFlowScope.parm1}</value>
        </input-parameter>
      </task-flow-call>

  On the default view of taskflow activity I want to display the parameter:

  <p>
      Here's your param:<af:outputText id="ot1" value="#{pageFlowScope.parm1.inputValue}"/>
  </p>

  And I don't see anything there.
  What did I miss?
  
  JDev 11.1.1.1.0. Thank you.

  Hi ILya Cyclone,

  I think you're confused. I think it should be like this:

  On my JSF page:

  
  action = "newInformation" >
  
  from = 'Hello '.
  to = "#{pageFlowScope.inputValue}" / >
  

  in stubborn taskflow, which has input parameter:

  
  inputParm1
  #{pageFlowScope.inputParam}
  java.lang.String
  

  Taskflow call activity has input parameter:

  
  
  /Web-INF/new-INF-TFD.XML
  new-inf-tfd
  
  
  inputParm1
  #{pageFlowScope.inputValue}
  
  

  On the default view of taskflow activity:

  
  Here are your settings:
  

  Sameh Nassar

• I have a second hand I pad problem is Ir won't let me pass the authorization page and maintains have turned off every 2 minutes, anyone has any suggestions please

  I have a second hnd I pad that won't let me pass the authorising officer page and although his full load it continues to go off after every 2 minutes

  Help, please

  Thank you

  Do you mean that you need Apple ID from the previous owner to enter the iPad?

  If so, bring her back. There is no way to get around that. It is called locking activation and is not something that a user can bypass

• Pass the parameter to the functions called from a dll

  Hi all

  I am interfacing a motor controller for PMC - 100 through the Protocol of Performax using labwindows.

  I need to explicitly link the PerformaxCom.dll and call functions with him. I'm calling this function

  BOOL fnPerformaxComOpen (DWORD IN dwDeviceNum, OUT HANDLE * pHandle);

  Faithful:

  If you want to link explicitly, you can consult this article: http://zone.ni.com/devzone/cda/tut/p/id/8503

  It has a code snippet that shows passing two parameters to a DLL function.

  But as for your statement that "I don't know how to pass parameter to him", in the example, you reference, you pass a parameter: it's just a constant string rather than a variable.

• How to pass the parameter to the script for interface/Package in ODI

  Hello

  Yesterday I asked a question how to pass a parameter to run the script interface or the procedure?

  I don't know if it's possible.

  Any clarification will help you.

  Kind regards

  Mahesh

  Mahesh, why not try this in your machine? This will give you more clarity and confidence.

  ODI has always check if there is any variable used inside an object regardless of the interface or procedure or package. So whenever you generate the script, you will be asked to select the boot parameters. She's. Whenever you use this scenario, make sure you that you add the variables in the additional variables section of the Properties tab.

  So answer is that it is possible.

  Bravo!