Pass the part of the message read in the section registered company proxy service

Similar Questions

• How to see the header values are passed as part of a Message in BPEL invoke

  Hello
  
  I spent some session id in the header of a message to invoke.
  In Audit trail, that I'm not able to see these header values, his only show transmitted the request body.
  
  Is there a way I can see past also the header values?
  
  Kind regards
  En

  See the below URL for more information on the complete SOAP in 11g message display.

  http://www.albinsblog.com/2012/10/getting-SOAP-envelope-of.html#.UUrX7TceBBE

  Mark recognition appropriate as "useful" or "right answer", if your problem is resolved.

  Concerning
  Albin I
  [http://www.albinsblog.com/]

• How to track the message to two different queue using jms proxy service

  Hi all
  In my project, I need to listen to a jms queue, then forward the messages to the queue of two different.
  Now, I already have a proxy for listening to the queue and then pass it to another queue using business service, it works.
  But how to forward messages to two different queues in the same workflow process using a proxy and bs?
  
  or in any other way?
  
  Really thanks in advance.
  
  Kind regards
  
  Kahlil

  You can use actions to publish in the pipeline to achieve this.

• Message read exception to move mail to another folder

  Hi all
  
  I created a service proxy in OSB 11 g, my proxy service is read a box to the letters, and after reading the mail I want to pass the mail to move (name of the folder), when I put the Postreadaction I found following error.
  
  # < 10 October 2012 09:45:24 SGT > < WARNING > < statistical ALSB Manager > < XXXXXX11 > < XXXXServer1 > < ExecuteThread [ASSET]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< e6153a40efec9bff:-22db15af:13999e07549:-8000-000000000000f82f > < 1349833524988 > < BEA-473007 > < aggregator did not receive statistics [XXXXServer2] for the aggregation run to tick 8415900. >
  # < 10 October 2012 09:45:27 SGT > < error > < WliSbTransports > < XXXXXX11 > < XXXXServer1 > < pool-27-wire-1 > < weblogic > <>< e6153a40efec9bff:-22db15af:13999e07549:-8000-000000000000f82c > < 1349833527702 > < BEA-381013 > < error occurred during the processing of messages from the Inbox E-mail Proxy Service ProxyService$ XXXXXXX$ Proxy$ XXXXXXXX : com.bea.wli.sb.transports.email.EmailWorkPartitioningAgent$ PostReadException: move
  com.bea.wli.sb.transports.email.EmailWorkPartitioningAgent$ PostReadException: move
  at com.bea.wli.sb.transports.email.EmailWorkPartitioningAgent.processPostRead(EmailWorkPartitioningAgent.java:456)
  at com.bea.wli.sb.transports.email.EmailWorkPartitioningAgent.processInboxMessages(EmailWorkPartitioningAgent.java:239)
  at com.bea.wli.sb.transports.email.EmailWorkPartitioningAgent.execute(EmailWorkPartitioningAgent.java:100)
  at com.bea.wli.sb.transports.poller.TransportTimerListener.run(TransportTimerListener.java:74)
  to java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:452)
  to java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:314)
  at java.util.concurrent.FutureTask.run(FutureTask.java:149)
  to java.util.concurrent.ScheduledThreadPoolExecutor$ ScheduledFutureTask.access$ 301 (ScheduledThreadPoolExecutor.java:109)
  to java.util.concurrent.ScheduledThreadPoolExecutor$ ScheduledFutureTask.run (ScheduledThreadPoolExecutor.java:217)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:897)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:919)
  at java.lang.Thread.run(Thread.java:736)
  >
  
  
  When I check his works very well.
  
  Please help if anyone has an idea.
  
  Marie-Ange

  Are you sure that you are connected to an IMAP port, not to a POP3 port? Move action is supported only with the IMAP protocol.

  Kind regards
  Anuj

• Failed to create the Proxy service with transport JCA

  Hello everyone.
  I have some questions when trying to create the ftp with jca transport service. I followed the instructions in this tutorial:
  http://blogs.Oracle.com/MarkSmith/entry/osb_and_ftp_adapter_in_11g
  
  I stuck at step 4, cannot create proxy service to use JCA file I created by JDeveloper 11 g (11.1.1.5). When I specify the file of jca proxy service, an error message returned:

  <ALSB Console> <BEA-494002> <Internal error occured in OSBConsole : Transport exception occurred with the following message:
  Invalid JCA file for JCA proxy service. If you are creating a Proxy from a Business Service, please select a different transport type (for example, http). If not, JCA file must contain JCA activation spec properties.

  And here's my content created by JDeveloper jca file:
  

  <adapter-config name="myJCA_FTP_service" adapter="FTP Adapter" wsdlLocation="myJCA_FTP_service.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
    
    <connection-factory location="eis/ftp/MyFtpAdapter"/>
    <endpoint-interaction portType="Put_ptt" operation="Put">
      <interaction-spec className="oracle.tip.adapter.ftp.outbound.FTPInteractionSpec">
        <property name="PhysicalDirectory" value="/home/FTP-shared/upload"/>
        <property name="FileType" value="ascii"/>
        <property name="Append" value="false"/>
        <property name="FileNamingConvention" value="osb_%SEQ%"/>
        <property name="NumberMessages" value="1"/>
      </interaction-spec>
    </endpoint-interaction>
  
  </adapter-config>

  Is there someone who had attempted to use JCA adapter Ftp transport already? Please give me a suggestion.
  Any response is appreciated
  
  Best regards, Cuong Pham

  If you have selected the operation PUT you can only generate a business of the JCA service.

• My iPhone-ish syncs with macbook pro when it comes to iTunes. Message reads "iPhone need latest version of iTunes. I can't understand how to upgrade iTunes on the iPhone, unless it comes to update the operating system. I guess I have the latest OS, 9.3

  My iPhone-ish syncs with macbook pro when it comes to iTunes. Message reads "iPhone need latest version of iTunes. I can't understand how to upgrade iTunes on the iPhone, unless it comes to update the operating system. I guess I have the latest OS, 9.3.2 on my iPhone. Any help for this problem?

  • Sync with iTunes on a Mac or a PC requires:

    • Mac OS X v10.8.5 or later
    • PC: Windows 7 or later
    • iTunes 12.3 or later (free download from www.itunes.com/download)

  iTunes too old and too old osx to support necessary to have iTunes, you will need to update osx to update iTunes to work

• I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please

  I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please

  only title bar opens and nothing else... Please help

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Also check the cookie exceptions.

• How can I fix the problem of my HP Photosmart D7160 showing a message this cartridge has passed the expiration date?

  My HP Photosmart D7160 one shows message this cartridge has passed the expiration date.  I bought and installed the new cartridge but still same message.  I really need to print stuff.

  My HP Photosmart D7160 one shows message this cartridge has passed the expiration date.  I bought and installed the new cartridge but still same message.  I really need to print stuff.

  Contact HP?

• Cannot send mail with attachment from message reads the operation failed an object could not be found

  Unable to send an email with a photo attachment. Once all the steps to configure the e-mail was followed and press on send, the message reads 'the operation failed.  An object cannot be found.

  Hello

  Welcome to the Microsoft Answers site. Please take a look at the following address:
  http://support.Microsoft.com/kb/312354/en-us
  If only it was not fixed, so it's more probablyy caused by an Antivirus/Firewall. Symantec Antivirus seems to cause this issue often (as well as other AVs). In this case, try to disable the mailscanner in your Antivirus and see if that solves the problem. Or disable the Antivirus add-ins related via Outlook. See here how to proceed:
  http://Office.Microsoft.com/en-us/Outlook-help/enable-or-disable-add-ins-in-Office-programs-HA010034127.aspx#BM9

  I hope this helps.

• The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490).

  The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways through the links suggested to solve the problem and nothing has worked.

  
  

  I turned to the forums and I saw that many, many people have the same problem with Vista SP2 Upgrade. Microsoft and several of its Vista customers realized that Vista has a lot of problems, but people who have need of the service. Being able to download and install the SP2 can make Vista more stable, but I get the same message mentioned above, and so I am sure are a lot of other people who are trying to get Service Pack 2 integrated into Vista.

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable.

  Unplugged network cable?

  Recently I get this message then on the line. You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable. It is very aggravating. Can someone tell me how to solve this problem? It might have something to do with my firewall? I recently downloaded mozzilla firefox if I could play words with friends, because IE would not work on the game.

  Hi LouisteanGriffin,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  Windows wireless and wired network connection problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)

• What can I do to remove a box pop up indicating "Message from Web page" and the message reads "object does not support this property or method".

  What can I do to remove a box pop up indicating "Message from Web page" and the message reads "object does not support this property or method".

  Hello

  1 how long have you been faced with this problem?

  2 have you made changes on the computer before this problem?

  3. when exactly you get this error message?

  The following threads may be useful:

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/message-from-webpage-not-implemented/d09fa331-92c6-4CD3-bc89-9a2c03e304fe

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/message-object-doesn

• Turning on the laptop computer error message reads "the user profile Service service has no logon. __

  The error message reads "the user profile Service service has no logon.

  User profile cannot be loaded.

  Thanks have tried but can't boot from a fix it for me or set me.

  Go to Safe Mode with networking

  Here's how to get safe mode:

  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Mode safe mode with networking

  You can log into your own account in safe mode?
  If so, you remember the date when you did NOT have this problem?
  If so, this date no more than 10 to 15 days ago?
  If so, again, please do a restore of the system in safe mode.

  How to restore the system:
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  Once completed, restart your machine and see if you can log in to your account in NORMAL mode.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• An error message appears every time I start my laptop Alienware of window 7, the message reads: "wscript.exe - no disk".

  Hi all

  An error message appears every time I start my laptop Alienware of window 7, the message reads: "wscript.exe - no disk" there is no disk in the drive. Please insert a disk into \Device\harddisk1\DR1.

  I'm a bit confused with this error message, I don't know if there are viruses in my computer, or the reason why this error message whenever I start my computer,

  Although I installed file encryption software.

  This could be a virus? and how to prevent this error message appear on my computer.

  Sounds like malware. Run msconfig.exe, and then selectively uncheck items under the Startup tab until you find the culprit.

• When you try to move a message read in a folder with the command move at the bottom of the screen, the screen greys out and nothing happens.

  I have synced my Hotmail account with Mail on RT and mail comes and goes well. All my files from my Outlook account transferred.

  However, whenever I try to move a message read in the Inbox to a folder, clicking the command move at the bottom of the screen (after pulling up to the command bar), results in the grizzled screen and nothing happens for hours. It seems that the system is blocked until I tap the gray screen and I'm back to where I was. In others, move the message command doesn't seem to work.

  I found that when I press the movement it gray to the screen with the exception of the list of folders on the left.

  I can then scroll up and down the list of folders and click the folder that I want to move the message.

  Seems to work ok for me.

  Steve