No Sound - Volume Mixer Vista Smart Audio 221 is not called on.

Similar Questions

• Cosmio G30: no sound after upgrade Vista - no audio output device installed

  Hello! I just installed Vista Ultimate and now is not any noise:(il dit aucun périphérique de sortie audio n'installé s'il vous plaît aider!)

  Qosmio G30 drivers are out but I have not installed vista yet, it's here
  http://209.167.114.38/support/download/ln_byModel.asp

  you upgrade or install own detail? I have ultimate improvement but my RAID driver were old version, then it crashed during installation.

  my email is [email protected] let talk more.

• No sound! Driver of Bus Audio HDA required, not found

  I recently re-installed Windows XP on my computer Dell Dimension desktop and downloaded every update is available from Windows Update. All right, except that I have no sound.  In the device manager under "Other devices" with a yellow question mark is multimedia Audio Controller.  I know that I need the ADI 198 x integrated Audio driver I can get from the manufacturer's website, but when I try to download it I get the following error:

  Driver of Bus Audio HDA required, not found

  I have tried everything to solve this problem, including the automatic adjustment on this site (which has not detected a problem) AND download a patch for Windows XP, which is available here: http://support.microsoft.com/kb/888111.  The problem is that there is no fix for XP with Service Pack 3 users! At this point, I am at my wits end and nothing seems to work.  I appreciate any help you could give me. It feels like I tried all the solutions, but I'm open for anything at this point. Thank you!

  If you will forgive the play on words, using MS Update is not the way the most up to date to get the latest drivers for your audio device.

  You go directly to the Dell support site and get your machine of Dimension, and then download the necessary drivers. If you get an error message during the installation you may have inadvertently downloaded the wrong driver.

  Try again or re-post giving Dell Dimension model number.

  See you soon,.

  Jerry

• Audio service does not not after download of Creative, restarts, error 0 x 80070002, the system cannot find the file specified

  Yesterday, I downloaded and installed updated Creative to my its Soundblaster card from Windows Update.  It lead me to a large download of Creative for its console related sound and SW, and things worked fine.  When I restarted this morning, there was a horrible loud hum while Windows was loading, and I made a hard stop.  When I rebooted, the buzz was gone, but the icon in the status bar indicates that the sound was off.  The sound message indicates that the audio service is not running.  I tried to restart the computer several times, but the results were the same.  I tried to restart the audio service of the Task Manager, but got an error message 0 x 80070002, the system cannot find the file specified.  Where should I go from here?

  Hi Jfklinger,

  This problem occurs because some legacy applications use files or components that were developed prior to Windows Vista. The names of these audio components may be different in Windows Vista. If the calling application uses the hard-coded file names, the new files and components could not be found.

  To resolve this problem, use one of the following methods to change the audio settings for a device.

  Method 1: use the order Volume of Windows

  To use the Volume of Windows command to change the audio settings for a device, follow these steps:

  1.right - click on the speaker icon in the notification area, and then click devices recording or reading.
  2. double-click - click the device for which you want to set the parameters. For example, double-click on Microphone.
  3. click on the levels tab.
  4. move the cursor upwards or downwards to set the desired volume level, and then click OK.

  Method 2: use Control Panel

  For control panel allows you to change the audio settings for a device, follow these steps:

  1. click on Start, click Control Panel, click hardware and soundand then click sound.
  2. click on the tab playback or recording .
  3. double click the device for which you want to set the parameters. For example, double-click on Microphone.
  4. click on the levels tab.
  5. move the cursor upwards or downwards to set the desired volume level, and then click OK.

  You may receive an error message when you run an application that uses the recording feature or audio playback in Windows Vista
  http://support.Microsoft.com/kb/930095

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• My audio service does not work - I can not use my pc on mode safe by minegold. How to return to normal

  my pc starts only in safe mode and I like the audio service is not running.

  for example, when I play something with you tube, I can see the video, but

  without sound.

  Hello

  Audio service does not work in Mode without failure.

  The services are very limited in safe mode.

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  See you soon.

• The speaker volume in the computer sound control mixer is up and works well with the speakers, but with headphones, I can hardly hear.

  Original title: the headphone volume

  How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear

  Hello
   
  1. who is the operating system installed on the computer?
  2. What is the brand and model of headphones?
  3A this works much earlier?
  4. What is the brand and model of the sound card?
  5. have you ever tried to play the Audio using different media player applications and check?
  6. have you tried to connect the headset to another computer or phone and check if it works well?
   
  I suggest you follow these methods and check.
  Method 1: Run the audio troubleshooter.
  Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience store
   
  Method 2: Set the earpiece/microphone as default device and check.
   
  a. right click on the volume icon in the system tray at the right corner on the desktop.
  b. Select the playback device, go to torecording tab.
  c. make a right click and headphone/microphone as the default device.
  d. click on apply and ok.
   
  If above steps fails, proceed to method 3.
   
  Method 3: I suggest to disable the improvements and check.
   
  a. right-click on the icon "speaker" at the bottom right of the screen.
  b. Select "playback devices".
  c. right-click on the helmet.
  d. Select Properties
  e. click improvements
  f. check Disable all improvements
  g. click OK
   
  You can read this article for more information:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems  
  
  You can also contact the manufacturer of headphones and check.
   
  I hope this helps!

• volume mixer icon is missing from my taskbar, can someone direct me as to how to get it back?

  original title: ideas: insert an error code or give a brief description of what you're trying to accomplish or difficult. __

  Hello, the volume mixer icon is missing from my taskbar, can someone direct me as to how to get it back?

  Hello

  Click with the right button on the taskbar, click Properties. Go to the notification tab and check again the line for the volume here icon.

  If it is not available, you may need to reinstall the drivers from your sound card or see the following page for an easy solution:http://www.winhelponline.com/blog/notification-area-icons-missing-in-vista/

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Low volume in Vista

  I have a Compaq Presario c700 running Vista 32 bit. When I play a DVD, the sound volume is very low. Please notify.

  Click right speaker - tab of peripheral improvements - speakers to highlight the lower properties right - reading
  Check Disable all sound effects apply / OK - also check levels here.

  Back to speaker - bottom LEFT - configure tests there.

  Control Panel - look for an Audio Manager (mine's Manager Audion Realtek) If you have one, it could
  is HP Audio Conexant Audio or... Rob - bicycle - Mark Twain said it is good.

• The recorded sound volume is very low

  the recorded sound volume is very low... previous, it was good... Suddenly don't know why, he fell it please help

  the recorded sound volume is very low... previous, it was good... Suddenly don't know why, he fell it please help

  I tried to verify that levels under manage audio devcies... even all checked... but still not found a solution to this... Please help with several steps... I'll try each... Thank you

  Hi navnyu,

  (a) what software do you use to record audio? Using Sound Recorder in Windows Vista or any other third-party application?

  (b) what device you use to record audio? Micro analog video camera, CD player and DVD player

  You can check the volume settings on the device itself for the volume levels.

  Also check the settings of volume (if available) in the recording software

  Run the FIXIT available in the link below and check if that helps

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Troubleshoot audio recording

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Volume mixer is not a balance slider

  order balance of speakerphone (vista/windows7)?

  Control of game XP window had a slider for adjusting the balance for wave and "play control".  Also known as the sndvol32.exe I'm under the rc of windows 7 and the volume mixer (sndvol.exe) isn't a balance slider more.  I realize I can go manually in the adjustment of the balance, but it's a pain since I seem to have to do it so often. Y does it have a shortcut to the file .exe for this window "balance"?  Or is there a way I can back my window "control playback?

  I really want to have to pay $18 (US) for the third-party mixer program. I downloaded a free freeware program, but most are really hideous (ruins of the flow of windows 7), inflated with icons, or does not work for what I need to.

  Go to control panel of-> sound-> sub tab 'Read' select 'Properties' of your device. (Speakers, headphones)
  Then, you will be on a tab "properties of speaker.  Select 'levels this option will allow you to change the balance.

  Hello jacks33177,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is a problem installing Windows 7 positions and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro?ITPID=sprblog

  Thank you

  Jack

  Jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite P100: Conexant audio only is not supported on Windows Vista 64-bit

  Last week, I install new Windows Vista 64-bit system, but not sound. I think it was the problem with the audio driver 64-bit. Is that someone has the new driver for vista 64-bit?

  It seems that some devices are not recognized by Vista common drivers that were shipped with the Vista operating system and therefore the new drivers are needed. But because Vista is not official on the market (official start is late January 2007) drivers are not published.

  But where did you get the version of Vista 64-bit?

• the Red Cross near volume icon - peripheral output Audio n is installed

  For some reason the last 2 days, my volume icon has a red x on it and says "no audio output device is available".

  The sound works for error messages, but nothing like itunes or youtube does not work

  And no it's not on mute, its got an error-type-cross, not the diagonol red line

  What should I do? I do not use speakers or headphones, it's literally just the speakers on my laptop that I use

  Thanks in advance to anyone who can help me :)

  Hello

  The sound card is recognized correctly in the Device Manager?
  This sounds to me like an audio driver problem.

  Try to remove the sound card in Device Manager and reboot the device.
  Wait for the windows operating system has recognized the sound card again and try again.

  If this will not help-> reinstall the audio driver.

  In most cases, it helps...

• Sound Volume control

  Windows XP Home SP3 32-bit

  I couldn't find a specific to this topic so here it is:

  I wonder why my sound controls disappeared from my taskbar. I don't

  Remember to do something that would have deleted it. But I can't seem to find a

  How to get it back.

  Does anyone know how to get sound volume control appears on the task

  bar? (This little yellow speaker who once was he?)

  Thank you...

  Hello

  Start > Control Panel > sounds and Audio devices > volume Place icon in the

  taskbar

  --

  Another response of the community of Windows XP newsgroups

• Adjust my stereo mix Realtek HD Audio bar is gray out

  Stereo mix Realtek HD Audio adjust bar is gray out.

  Hi Mattieuroi,

  1. When did you start to question?

  2. did you of recent changes on the system?

  Method 1:

  You can consult the device manufacturer Web site or the computer and try to update the latest version of the audio drivers.

  For more information, see the following article.

  How to manage devices in Windows XP

  Method 2:

  a. click the Start button, type "MMSYS.» CPL"(sans les guillemets) in run and press Ok or enter."

  (b) under the Recording tab, click the "Volume" button and turn on the stereo mix.

  If you see no stereo mix, then Options -> Properties -> select stereo mix and click OK.

  See if it works.

  Hope this information is useful.

• Sound Volume settings do not go below 20% or greater than 70% HELP!

  After restoring my computer using Norton Ghost because of this problem, it happened again after several days and I have no idea why, or how to solve this problem.

  The green light on volume will be not less than 20% and not more than 70% using different volume controls.  This is verified by going to the control panel and looking at the settings of the sound card and all mixer controls accessed through entertainment console commands.

  All of them, no matter how I try to adjust my volume, can't go to zero, full 100%.

  I'm pretty sure that I did not visit all websites would have done anything to my system, although it is not always guaranteed.  I also run Avast Antivirus and Malwarebyte Anti-malware constantly.

  This issue first appeared a few weeks ago, during which, after struggling to set things straight I restored my system and yet tonight no reason apparent.

  When I try to move the cursor under a minimum of 20% is refuse and bounces.  And even more than high 70%.  It's as if some type of compression thing happening automatically as I do not turn.  Not that I know of.

  Everyone heard about this problem before?  How to fix?

  I thought I had discovered a solution.  Don't know how or why it worked, or what has caused this setting initially, but here's what I discovered:

  I went to Windows Media Player after having reviewed the Options tool, judged on the tab DEVICES, speakers highlighted and clicked on PROPERTIES, as the device to use default Directsound device.  I changed it to the map of his Creative Audigy, I have in my office and that seemed to do the trick.

  Yet once, don't know how this has changed or if it has never changed a bad choice, but by changing it ((retour) return) for my Creative Labs Audigy card, fixed levels of sound volume to 0 and 100%.

  = = = = = = = = =

  This post is almost a month after the one above.  This solution (changing the speaker inside Windows Media Player properties) does not work for me.  The problem I wrote originally, returned again tonight, and the difficulty that I thought I had discovered does NOT work.

  Everyone, if you know why the Green level bar can get stuck at 20% to 70% please advise!

  I don't know how to solve this problem.