Pass the trunk between catalyst and PIX

Similar Questions

• What is the difference between Fdisk and Chkdsk programs?

  Hello:

  I don't think I have a common question of OS knowledge and I worked a lot with both, however for years so I forgot everything I used to know.  I was talking to someone Executibles MS-DOS command line and this person I know told me in email and I did not at the moment, but he said the following:

  "Fdisk and chkdsk are pretty much the same.

  Being an old Microsoft OS Engineer I knew it was wrong, however I've been retired since almost 20 years and I have not worked with either for a while.  I looked in the KB for articles explaining the difference between fdisk and chkdsk or define at least the two against each other, but there is no specific article I could find.  I remember the days when the scariest user had a problem, but they ran all third party software on their computer and have installed BETA version software etc so I'm sure you know the drill and this type of person.

  The person who said this about fdisk and chkdsk is one of those people.  It is a really nice guy, but a nightmare to Microsoft when you talk to a convenience store to the BONE for assistance.  Is there someone out there who could you, please, help me and summarize an irrefutable definition or description indicating the differences between fdisk and chkdisk?  I don't remember the basic functions both I widely used both, but too many years have passed and I don't want to sound like a fool trying to write about the differences.

  I'd appreciate any help I want to educate my friend and the intention is to not make this person feel like a stupid either.

  Thank you, and I expect your response.

  Eric

  The two are completely different, one is a format utility the other is a utility disk check

  http://support.Microsoft.com/kb/255867/en-us

  Fdisk was used in earlier versions of victory

  http://Windows.Microsoft.com/en-GB/Windows/Fdisk-FAQ#1TC=Windows-7

• What is the difference between ActionEvent and SelectionEvent?

  Technical environment:
  Oracle jDeveloper 11.1.1.4.0
  Windows XP
  ----------------------------------------
  
  I think there is something behind ActionEvent and SelectionEvent which makes my code does not work.
  
  Here's my problem:
  
  I have three tables. One is a masterpiece, contains the summary of something. If I select a line on this chart, the second table shows some data, based on the line selected on the first table. Well Yes, it is a ViewLink, and it works perfectly. Now, I want the same thing to work between the second and the third table. If I select a row in the second table, the third table should show some data, based on the line selected on the second table. The third table is a ViewObject with some binding settings. I need to assign values to these parameters, that I get the value of the line selected on the second table. How can I do this?
  
  I tried to use ExecuteWithParams. Select the line in the second table, get the values, pass it in the form ExecuteWithParams, run and... it works... I get the result on the third table. Here is the code how to:
  
  ***
  {} public void updateTableEvent (ActionEvent actionEvent)
  DCIteratorBinding iter = gen.getIteratorBinding("SearchView3Iterator");
  Line rw = iter.getCurrentRow ();
  
  oracle.jbo.domain.Date strDate = rw.getAttribute ("Tgl") (oracle.jbo.domain.Date);
  String strRkno = (String) rw.getAttribute ("Rkno");
  oracle.jbo.domain.Number strRkId = rw.getAttribute ("Rkid") (oracle.jbo.domain.Number);
  
  DCIteratorBinding iterParam = gen.getIteratorBinding ("variables");
  iterParam.getBindingContainer () .getVariableManager () .setVariableValue ("ExecuteWithParams_pRkId", strRkId);
  iterParam.getBindingContainer () .getVariableManager () .setVariableValue ("ExecuteWithParams_pTgl", strDate);
  iterParam.getBindingContainer () .getVariableManager () .setVariableValue ("ExecuteWithParams_pRkNo", strRkno);
  OperationBinding operationBinding = gen.getOperationBinding("ExecuteWithParams");
  Object result = operationBinding.execute ();
  }
  ***
  
  But when I tried the same thing on SelectionEvent, I did nothing... no error and also no results. What I want is just to select the line on the second table and get the result on the third Board, not any pressure from button. Here is the code:
  
  ***
  {} public void onRowSelect (SelectionEvent selectionEvent)
  DCIteratorBinding iter = gen.getIteratorBinding("SearchView3Iterator");
  Line rw = iter.getCurrentRow ();
  
  oracle.jbo.domain.Date strDate = rw.getAttribute ("Tgl") (oracle.jbo.domain.Date);
  String strRkno = (String) rw.getAttribute ("Rkno");
  oracle.jbo.domain.Number strRkId = rw.getAttribute ("Rkid") (oracle.jbo.domain.Number);
  
  DCIteratorBinding iterParam = gen.getIteratorBinding ("variables");
  iterParam.getBindingContainer () .getVariableManager () .setVariableValue ("ExecuteWithParams_pRkId", strRkId);
  iterParam.getBindingContainer () .getVariableManager () .setVariableValue ("ExecuteWithParams_pTgl", strDate);
  iterParam.getBindingContainer () .getVariableManager () .setVariableValue ("ExecuteWithParams_pRkNo", strRkno);
  OperationBinding operationBinding = gen.getOperationBinding("ExecuteWithParams");
  Object result = operationBinding.execute ();
  }
  ***
  
  Then. What is really going on here? What is the differece between ActionEvent and SelectionEvent? Why did give me answer of difference?
  Thanks for your comments.
  
  
  Kind regards
  Novan Ananda

  Hello

  did you tried third table PPR.

  Simply give the id from table2, table3 partialtrigger.

• What is the best between Firefox and Aurora?

  What is the best between Firefox and Aurora?

  Hello DarshanK, that depends on what type of user you are probably: https://www.mozilla.org/firefox/channel/

• What is the difference between extensions and Plugins and Add-ons?

  I'm sorry if here is not the right place for this post.

  What is the difference between extensions and Plugins and Add-ons? Apparantely, they differ in some sense or aspect, but I do not know how. Please, if it is not too complicated, explain in detail and simple language. Thanks in advance to 1 million.

  Kind regards
  Danesh

  Hi Danesh,

  You should take a look at this article for an explanation. Plugins and extensions are essentially types of Add-ons as well as of the characters and themes.

  Hope this helps!

• What is the difference between Firefox and Namoroka 64-bit? I have a 64-bit computer. Which should I use?

  What is the difference between Firefox and Namoroka 64-bit?
  I have a 64-bit computer. Which should I use?

  The officially supported only is Firefox - which is your best choice, unless you want to test the new features...

  http://www.Mozilla.org/en-us/Firefox/new/

• What is the difference between dawn and the beta?

  What is the difference between dawn and the beta?

  Beta is the next version of Firefox that is due to be released in 5 weeks, and Aurora is the one after that--like an Alpha version of development.

• Whenever I type the letter between f and h (he can't come in here or the problem occurs, so I will use 'p' instead), the locking of the keyboard and an informal search screen is displayed in the toolbar. Also happeninp in emails and 'my documents' but no

  I can't use a certain letter on my keyboard when in Firefox, email or my documents without the Freezin' screen and a pop up appears in my toolbar for a brousin site. The character I can not type is the letter between f and h in the alphabet. I have no problem with this letter in other applications, so I know that's not the keyboard. How to make and use this letter?

  This has happened

  Don't know how many times

  Is a week by o

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use 'Disable all add-ons' on the start safe mode window.
  You will need to close and restart Firefox after each change through "file > exit" (on Mac: "Firefox > Quit")

• Is the difference between TSMC and Samsung Chip in the real Iphone 6 s? If this is the case, how can I found it before buying a new? How can I

  Is the difference between TSMC and samsung chip processors in the real Iphone 6 s? If this is the case, how can I found it before buying a new one?

  No, it isn't.

• What is the difference between AXIEM and EMSIght? What are the benefits of AXIEM by EMSight if any?

  I wonder what are the differences between AXIEM and EMSight. Are associated with application? One is better than the other? Please explain.

  AWR estimated AXIEM most powerful plan EM Simulator around.   AXIEM is at the center of continuous research and improvement, while EMSight is only worked on if revealed serious flaws.  Here is a summary of the differences:

  Mesh

  • EMSight must mesh the nearest grid drivers using rectangles.  This causes the mesh to have more elements mesh when there are small and large geometries.  The grid should be small enough to capture the small geometry but then causes large geometries to mesh more.   In addition, angled or curved structures causes inefficiencies mesh.
  
  
  • AXIEM STS forms, rather than a grid.  In addition, the mesh can be rectangle or triangle.   This allows a much more efficient mesh.   AXIEM generally have a much more efficient
  
  
  • AXIEM contains the ability to process forms to clean geometries that cause inefficiencies of the mesh.  EMSight does not have this feature.
  
  
  • AXIEM can forms thick metal mesh, EMSight can not, and user must make approximations when thick metal will change coupling (loss is recorded properly with the thickness of the metal)

  Ports

  • The ports are for the most part similar, but parasites due on AXIEM ports are less.  In addition, the AXIEM has a side wall, thus the effects of not move of the terms of reference of the edge of the line are a lot less AXIEM in.
  
  
  • Ports can be added to most any place in geometry with AXIEM.  For EMSight, the ports are usually only added outside the geometry and have limitations to the aircraft on either side of the reference speaker.

  Problem solvers

  • EMSight does not have a low frequency Solver.  Stop low-frequency and then extrapolate to DC.  This usually works well, but you must take into account if the extrapolation is accurate.  AXIEM presents both a low and high frequency Solver so will do better in a low frequencies generally much better in DC.
  
  
  • Solver of EMSight scales O (n) ^ 2 for memory and O (n) ^ 3 for the moment.   It has a special algorithm to break the question of memory, but the question of time is the killer.  AXIEM has a direct Solver which scales in the same way and an iterative Solver which will scale O (nlogn).   In other words, AXIEM can solve a lot of bigger problems than EMSight.
  
  
  • Several AXIEM processes are multithreaded as EMSight.

  Speaker

  • EMSight is inside a perfect driver side wall.   This works well if you the circuit is in the same cavity.  If not, you must know the rules of them on to the forms of space of the flanks and how that much to extend the port could reference planes.   AXIEM is not here.   AXIEM does not currently have to simulate a perfect driver side wall.

  I don't know that I missed a few aspects of the tools.   From the point of view of the AWR that AXIEM is the tool of choice, except in a few cases have been EMSight may be required.

• What is the difference between tear and Brüning cd

  What is the difference between tear and Brüning a cd.

  Hi SirNickLong,
  Here are a few links to explain the difference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-from-a-CD
  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-burn-a-CD-or-DVD
  hope this helps,
  Eddie B.

• you want to know the difference between authentic and cracked windows

  What is the diff between cracked and windows geniune?

  and also how know time my PC has windows cracked or original?

  The fact is that a cracked loader Windows 7 installation is reverse engineering unauthorized intellectual property of Microsoft. There is no property thereon, except you hacking and piracy of Microsoft software. If you want to run the genuine Microsoft software on your computer, buy a license:

  MS Windows 7 store price:
  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

• What is the difference between nc6320 and nx6320 laptops?

  What is the difference between nc6320 and nx6320 laptops?

  Can I use the same drivers for each of them?

  Hello:

  There is not much difference.

  If you want to compare all the details you can check this link:

  http://h18000.www1.HP.com/products/QuickSpecs/12428_div/12428_div.PDF

  You can probably use the same drivers for either, but they all have both their own support pages and separate driver.

  nc6320:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1839154&lang=en&cc=us&TaskID=135&prodSeriesId=1839146&prodTypeId=321957

  NX 6320:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1839169&lang=en&cc=us&TaskID=135&prodSeriesId=1839144&prodTypeId=321957

  Paul

• screen saver; have a screen saver password photos. As he passes, the screen goes black and stays black. What can I do?

  have a screen saver password photos.  As he passes, the screen goes black and stays black.  What can I do?

  have a screen saver password photos.  As he passes, the screen goes black and stays black.  What can I do?

  ===============================
  I don't know what is causing this problem but would be
  suspicious, it is related to a corrupted or obsolete
  video driver.

  Might be interesting to try to reduce your graphics
  Hardware acceleration instructions
  in the following article.

  How to put in back of graphics hardware acceleration
  http://www.pptfaq.com/FAQ00129_How_to_set_graphics_hardware_acceleration_back.htm
  (scroll down to: "If you are using Windows 2000 or XP")

  If they improve the question, you should look for the
  site Web of MFG. your video card
  a updated driver Win XP compatible video. Or...
  If your computer is a laptop... Search support
  site of the manufacturer of your computer.

  If you do not know the make and model of your
  Video adapter, see the documentation that
  supplied with the computer.

  Also you can find info on your video by driver
  go to Device Manager: you can launch
  By clicking Device Manager on... Start/run and
  type or copy / paste:
  devmgmt.msc
  And then press ENTER.

  Expand "Graphics cards" and right click
  the name of your graphics... then
  choose... Properties / tab pilot... FYI.

  You should find the make and model of your
  adapter display as well as the version of the driver.

  If the driver on the Web site is no longer
  current than you run...
  Download and install it. In addition, installation
  instructions that should be followed closely
  should be available on the support site.

  Once installed the new video driver... you
  can restore your full acceleration.

  Good luck...

• How can I fix the link between adobe and windows if I see .pdf not win32 application

  How can I fix the link between adobe and windows if I see .pdf not win32 application, without the disc?

  "Adobe" is the name of the company that provides a great many different applications.

  Adobe Reader is free and allows you to view pdf files.

  Adobe Acrobat is expensive and allows you to create, edit and view pdf files.

  Assuming that you are referring to the reader, uninstall all the versions of it using the control panel > add or remove programs.  Then either

  1. go to http://get.adobe.com/reader/?promoid=BUIGO and download the current version (remember to uncheck the box to install McAfee Security Scan Plus.

  or

  2. go to http://www.foxitsoftware.com/Secure_PDF_Reader/ and download Foxit Reader, a small pdf reader and many more.

  Then, install the reader that you have downloaded.