pass USB Bluetooth for car audio

I have a CR - V Honda Touring 2015 model.  Initially playing audio through bluetooth worked flawlessly, phone calls and messages worked very well too.

I tried to get the album in shuffle mode to work (see other posts by me) on my iPhone 6.  I got an iPod classic to see if it would work with this combination.  Well, it does (after some fiddling).  Then I unplugged the USB iPod and plugged the iPhone 6.  System played as expected (but did not play mode random album).  Now I can't get the iPhone to read audio data via bluetooth, I can do other things like switch titles.  Telephone stocks to work very well.  I'm pretty sure it's the iPhone of my son plays very good audio via bluetooth.

I tried: reboot, reset the settings, disconnect and repair on iPhone

Anyway to get the iPhone 6 to read audio data via bluetooth and USB not?

I should add that I tried the iPhone even in another car (VW GTI) and it worked, so that there could be no finger pointing as it was the car (CR - V) or the iPhone which was worth.

Long story shorter, I think go to settings > General > Reset and using the two reset network settings seemed each AND reset all settings TWICE, to restore things.  If I had to do it again, I'll try first the old just.

Tags: iPhone

Similar Questions

  • Crackling / popping noises during playback of music via Bluetooth for car radio (6 s iPhone / iOS 9.2)

    Since getting my iPhone to launch 6s, I noticed that there are quite loud crackling and popping noises coming through when I listen to the Apple music in my car audio system (connected via bluetooth).  For those of you old enough to remember, it is similar to the noise that scratched used to make recordings of LP!

    Curiously, there is no problem when first to connect the iPhone to my car (a Ford S-Max).  It appears that when I get in the car for the second time - and then it stays until I have cancel the twinning of the iPhone from the car and start over.

    Interestingly, the problem is not present on my old iPhone 6 (which I still have) or 5 my wife's iPhone or iPhone 5 s son.  This makes me think that the problem is not with the car.

    As an extra touch, the iPhone 6s has been replaced by Apple because of this problem, but the alternative is to have exactly the same problems.

    I would really advice or tips that anyone of you can offer.  In addition, it would be good to hear if anyone else has experienced this problem.

    Thank you!

    Same problem here iphone6s jerking audio via bluetooth to a 2011 ford fiesta, 6s with other devices bluetooth is fine, bluetooth other phones in the car is fine (iphone5 iphone6).

  • If connected via Bluetooth with car. Phone starts to compose himself after updating iOS 10

    After updating iOS 10: connection via Bluetooth for car, then phone (iphone more 6s) began to compose himself. My President iPhone which is not longer work well

    Hi Pharao-nael,

    I understand that after update your iPhone to iOS 10, he begins to call itself when it is connected to Bluetooth. I know it's important for your iPhone to work as expected, so I'm happy to help for this.

    Since this occurs only when it is connected to Bluetooth, the first thing you want to do is cancel the twinning of the car:
    Configure and use third-party Bluetooth - Apple Support Accessories

    Turn off pairing a Bluetooth accessory

    To disable the pairing a Bluetooth accessory, tap Settings > Bluetooth, find the device you want to disable the twinning, tap , and then we forget this device.

    When you forget this device on your iPhone, iPad or iPod touch, this accessory is removed from the list of available Bluetooth devices.

    Make sure that your iPhone does not seek to call itself after it is disconnected, and then you can pair the iPhone and the car again:

    Pair your device with a Bluetooth accessory

    1. On your iOS device, tap on settings > Bluetooth. Stay on the screen until you complete the steps to pair your accessory.
    2. Place your accessory in discovery mode and wait until it appears on your iOS device. If you don't see it, or don't know how to make it discoverable, check the instructions that came with your accessory or contact the manufacturer.
    3. Tap your accessory pair. You will have to perhaps enter the CONFIDENTIAL code or password. If you do not know what your PIN code or word password, see the documentation for your accessory.

    When pairing is completed, you can use the Bluetooth accessory with your device. You can pair several Bluetooth accessories with your iOS device. Just follow the steps above to pair additional accessories.

    Thank you for using communities of Apple Support, cheers!

  • DOWNLOAD Bluetooth for Pavilion 15 laptop

    Hello

    Can someone link me to a download for my laptop Notebook 15 Pavilion.

    I thought that I had downloaded previously using a link here to the DESIRE, but I could not find the icon once it was downloaded.  Can anyone throw any light on this?

    Here are the specifications of your computer HP laptop Pavilion 15-e072sa. Based on the specifications, this model does not include an adapter Bluetooth installed in the factory. No download HP driver will allow the use of Bluetooth technology on this computer. You can buy a dongle USB Bluetooth for this computer have Bluetooth connectivity.

    If you have any other questions, feel free to ask.

    Please click the White Star of KUDOS to show your appreciation

  • Toshiba, make Linux - Ubuntu drivers for USB bluetooth

    Toshiba, please make good Linux - Ubuntu drivers for your USB bluetooth. I was unpleasantly surprised noting that there is no driver available for Ubuntu. Please could someone explain THE reason for such a policy failed to Ubuntu users?

    The problem is Ubuntu here. The Bluetooth adapter is directly connected to the USB bus, so it should work without any problems if the OS is delivered with the appropriate software to Bluez. Try to update your Ubuntu installation (apt - get update). Make sure bluez is correctly installed.

  • The conclusion for M - Audio MobilePre USB driver problem

    The conclusion for M - Audio MobilePre USB driver problem

    Use: iMac

    OS: El Capitan 1011.2

    The latest driver I could find was 1.8.1.

    Error message:

    Installation failed - Setup could not install the software because there was no

    available software

    I would use this hardware with Final Cut ProX 10.2.2 and Garageband 10.1.0.1

    A quick search seems to indicate the latest version of the driver to be 1.2.1 - there was no 1.8.1 I could find. It has been out for more than a year, so no mention of El Capitan, but it could work. I'll make sure that you have the right to download and try again.

  • Need suggestion for USB Bluetooth adapter for HP Z230 workstation

    I just bought a workstation HP Z230, with an I7 processor.  I need to equip it with Bluetooth capability so that I can connect the computer to an old Palm Tungsten T2.

    There are gobs of USB Bluetooth 4.0 adaptors / dongles on the market, but in reading the comments of the buyer, they seem to everyone some type of problem with the problems of compatibility or installation on something.

    Anyone has a suggestion for a USB Bluetooth stick that works well with the Z230?

    Thanks in advance for any help.

    Terry

    I suggest to reachthe forum company businessand post your query there.

    Your HP Z230 workstation is a HP business class product and not a class of consumer device. It's the HP consumer support forum.

  • Download stack Bluetooth USB dongle for Windows 7

    I have a Toshiba USB bluetooth dongle. The software will not be installed using Windows 7 and the dongle doesn't work at all on my PC. Download only that I could find for the software was for Toshiba laptops! Where can I download the software and drivers? I have to say that support for the updates of Windows 7 is very poor or very well hidden. Why is the only free battery for portable computer users? Have to avoid in the future products of Toshiba because the support appears to be nonexistent. Any help would be appreciated.

    > The software will not be installed using Windows 7 and the dongle doesn't work at all on my PC

    As I understand it, this software is designed to run under Xp/Vista. Right click on setup.exe and select Properties. In properties, select the Compatibility tab and you will see, Compatible mode.

  • PC laptop 15-r032tx: I really need a USB & Bluetooth Driver for my laptop HP 15-r032tx

    I have a laptop HP 15 - r032tx Notebook PC and I formatted my lappy because of some virus bad cuz its remained now my lappy is installed with WINDOWS 7 64-Bit. So after formatting I wasn't havnt readers so I got from HP website. in this case wen I downloaded all the drivers and installed it all... .and rebooted my system. and YET, there is a missing driver issue. USB and BLUETOOTH.

    So could you please send me a link of drivers to download for my Lappy question.

    I am unable to use a USB key and many more devices life USB USB PORT.

    Please help me this problem as soon as possible.

    Hello:

    You find the parts list for your laptop it comes with a RT3290LE 802.11bgn 1 x 1 Wi - Fi and Bluetooth 4.0 adapter Ralink WLAN combination.

    http://PartSurfer.HP.com/search.aspx?SearchText=J8B78PA

    Here is the latest driver bluetooth for this card.

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_147890_1

    The product page for your laptop card indicates he has a 4th generation Intel processor core processor which means he has a 8 series Intel chipset.

    Here is the link to the USB3 for this chipset driver.  Download, unzip and run the setup.exe file.

    https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-series-and-C220-C610-chipset-family

  • Windows 8 "There is a problem with the driver for bluetooth hands-free audio"

    There is an X symbol by the sound icon, when clicked, it shows "There is a problem with the driver for the audio blue tooth hands-free". Troubleshooting has not been set, said that there is a bluetooth hands-free audio driver problem. In addition, when you look at the audio in Device Manager, error code 19 lights during all the points listed under ' audio, video and game controllers ".

    Hello

    Thanks for posting your question on the Microsoft community.

    We need more information about the issue so that we can help you better.

    What is the brand and model of your computer?

    Thank you for details on the question and your efforts to resolve.

    This problem may occur because of corrupted audio driver or settings.

    I suggest you run this Microsoft fixit and verify.
    Reference:
    Hardware devices do not work or are not detected in Windows
    https://support.Microsoft.com/en-us/mats/hardware_device_problems

    Automatically, he diagnoses and fixes problems with the hardware. Keyboard and mouse are not detected by the Manager of devices or when they do not work.

    I would also say that you uninstall and reinstall the sound drivers under "Audio, video and game controllers" and check.

    To uninstall the driver, please follow these steps:

    a. press Windows + R keys, type devmgmt.msc in the run window and press ENTER.

    b. Click to enlarge "Audio, video and game controllers", right click on the device, and then click Uninstall.

    c. restart the computer.

    Now, reinstall the drivers from the computer manufacturer's website and check the.
    Reference:
    http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Selection of car audio

    Hi, I have a Sony car stereo, and I would like my next device would still be a Sony. I'm looking for this condition:

    -Multicolor button

    -usb rear (I would like to connect my HDD)

    -available bluetooth (I am very disappointed Pioneer models can manage several bluetooth phones from Sony, including my real Samsung not supported Sony)

    -distance

    All MP3 player:

    -J' wish that the MP3 tags would be shown (also the image cover)

    -perhaps would benefit from support playlists (m3u format)

    -name of the file (full or last file)

    Available device support these features?

    Thank you.

    P. S.

    I'm also a little disappointed App Remote ins't suitable for other OS, Bada, or Linux.

    Can you imagine if App Remote could manage the music files stored on devices, Linux or Windows?

    Or if the customer may management interface own media player?

    Salvation in the shade,

    You can check the WX-GT90BT car audio system which has the Bluetooth with the App Remote Control receiver

    The exclusive App Remote function combines music and apps Smartphone select it from a list of single source that can be displayed safely and directly controlled by your receiver. It comes with the remote RM - X 231.

    http://store.Sony.com...specifications

    If my post answered your question, please mark it as an "accepted Solution".

  • device driver Bluetooth for windows 7 64-bit sony vaio

    Hello

    I need device driver bluetooth for windows 7 64 bit for sony vaio

    device driver Bluetooth for windows 7 64-bit sony vaio

    Please help me

    -Nicolas

    After spending an obscene amount of time researching this Bluetooth stupid nonsense this week, I finally opted for a solution.

    This is how to solve the "Bluetooth peripheral device is not a driver:
    I use the following materials in a dozen different tests:
    -Only for Broadcom based on USB from Belkin and Targus dongles
    -Windows 7 Professional 64-bit on four different computers
    -4 different Bluetooth headphones: Plantronics One, a matrix and two Motorola
    -Bluetooth file transfer wasn't of interest, but I tested with two different phones
    This guide will be useful for those with similar... hardware configurations and for those who have tried all the other nonsense without result.  Especially that many times repeated "Just install Windows Mobile Device Manager."
    -- -- --
    Step 1: Ignore 99% of you think that you have learned about this problem.
    It will be * probably * boil down to a missing COM port.
    Step 2: Certainly ignore the bit about installing the Windows Mobile Device Center
    (Unless you have a Windows Mobile-based phone and/or have another use for a flavor of Windows 7 of Activesync).
    Step 3: Stop looking for a driver for something called a "Bluetooth device device.
    There is no such thing. If you look at the Bluetooth installation take place, you will notice that all the components of the Bluetooth technology initially as "Bluetooth Peripheral Device" and then once Windows ID each element, the appropriate driver is installed and the name replaces "Bluetooth Peripheral Device" to something like "Hands-free Bluetooth Audio" or "Bluetooth Remote Control" etc.
    -- -- --
    Unfortunately, most of the people reading this will have tried one or more of the following:
    1.) install this stupid Windows Mobile Device Center
    2.) install any number of drivers Bluetooth who-knows-what from who knows where
    (3.) running all kinds of utilities third driver
    4.), forcing several facilities from pilot to operate in Win98, XP or Vista
    5.) sacrificing countless animals
    The end result is a plethora of useless software and/or driver and/or updates... facilities and some dead animals.
    -- -- --
    Instead, here is the solution.  I tested it with three different USB Dongles (2 Belkin and Targus 1) and on four different machines: HP, Sony, Toshiba and another HP. Two were newly not framed with Windows 7 Professional 64-bit and two have been upgraded to Vista to the same OS.
    With each machine, I plugged the following helmets: a legend of Voyager from Plantronics, Motorola S9, Motorola S805 and matrix AF62 and a Samsung S3 and an HTC Android.
    So I guess it's fair to say that it is a solution for one of these dongles... but in reality, most based on Broadcomm USB dongles is affected. I ran across these stages in four different boxes after checking that the beast ""Bluetooth peripheral device is not a driver " "
    appeared during installation.
    1.) If you did any of the unsuccessful steps mentioned above, enter the control panel and delete everything that you have installed.  Kill all the entries Broadcomm or Widcomm bluetooth. Delete all 3 rd-party driver maintenance apps. Restart a machine clean.
    2.) locate and install a Broadcomm 6.0.1.6300 OR 6.2.1.500 driver.  Either one works, but the last (most recent) has much better management tools for Bluetooth device
    .  I tested the installation of separately and also starting with 6.0.1.6300 and then upgrade to 6.2.1.500.
    (Ignore the stupid Updater Driver Broadcomm they grow to their website - it is useless for the majority of us out there.)
    (3.) that you install one of the above, you will see a notification regarding the installation of the various components.  Click this pop-up window and watch the progress.  You will see that each "Bluetooth Peripheral Device" Gets a new name, as the related driver is installed.  In my tens + tests, each & every item at this point got the green check mark of success.
    4.) now attempt to pair the device of your choice
    .  IF only the manufacturer provides separate drivers, do not install them again, regardless of their instructions.  See how Windows gets its own.
    5.) as soon as the match starts, you will see more notifications for individual driver components.  Click on one of them and observe a similar progression... Except that you will have a ""Bluetooth Device device ' with the dreaded Red X and the complaint that no driver was found. "
    6.) do not despair
    ! This happens the first time connect you a new Bluetooth device.
    7.) wait for the installation to complete.  Despite the dialog box display the list of components of Bluetooth with a red X, you probably have another window saying that the perfectly paired Bluetooth device.  But you and I know that he didn't. Confidently click to close this dialog box.
    8.) open Device Manager (via the Control Panel, the computer properties), and you will discover that cursed Device Bluetooth that is sitting there in the Middle under 'other devices '.
    9.) right click on the Bluetooth device with the yellow exclamation mark under 'Other devices' and select 'Update Driver' - then:
    Click on:
    a.) browse my computer for driver software
    (b) let me pick from a list of device on my computer drivers
    (c.) in the common hardware types list, select:
    --->>> Ports (COM & LPT)<>
    d.) d.) under manufacturer, select Microsoft
    e.) depending on the model, choose "Standard Serial over Bluetooth Link" & click "next".
    f.) when you are prompted with the update driver warning, click 'yes '.
    g.) with joy to read the message that "Windows has updated the driver software.
    (h.) read for pleasure, and then click "close".
    (i.) to confirm that this disorder is really fixed (assuming compatible devices, etc.) Right-click on the Bluetooth device and choose "Troubleshoot" - that there should be no reported problem.
    10.) you shouldn't have to restart, but you POURRIEZ have need spend the power of your Bluetooth device Off & turn it on again to let it reconnect again (just NOT re-pair... re - connect). About a dozen tests, I had only to do once, and it was with a 3-year-old-Bluetooth headset.
    -- -- --
    I have argued my way in the solution by installing on a Vista machine where everything worked perfectly.  After the installation of various devices under Vista, I spotted the COM Port in Device Manager - which was the only element that did not appear in the installation of Windows 7... but instead remained at the dreaded 'Bluetooth Device device".
    Windows Mobile thing worked only for some people because it was fundamentally address a bunch of different physical possibilities... but for those who did not have success, it's because Windows Mobile Kitchen Sink approach did not include the driver Port com
    -- -- --
    Voluntarily, I don't understand not all links to the drivers as one.) change links and b.) I don't want to be responsible for some knucklehead packaging site a Trojan horse in the zip file.  Let Google your friend and your instinct be your guide.
    I will say that I used a 6.0.1.6300 directly from the Belkin site and a 6.2.1.500 directly from the site of the bridge.
    I hope this saves people a lot of frustration.
  • Module Bluetooth for Satellite A80 129

    Hi all!

    Is it possible to upgrade my satellite A80-129 with a BT module or it is not possible at all?

    And if possible, what then is the right one for my laptop?

    BR, Kekec

    Hi kekec

    I found information that Bluetooth for A80 is not available. This means that there is no possibility of upgrade. In this case, the best advice is USB Bluetooth stick.

  • USB Bluetooth adapter problems

    Hello

    I recently got a new Toshiba Tecra S1 (PM725) and an adapter Bluetooth usb (with More4you software).

    But I can't make it work with my nokia 6310i

    I installed new battery BT (Bluetooth Stack for Windows by Toshiba (3.10.00).

    Analysis of my nokia BT Manager, but when I want to connect to it, it immediately disconnects (after that I supported on accept connection on my nokia pairing) and the BT Manager gives the error: a not to connect to the following service: Dial-up networking. Connection request failed.

    I only installed the BT stack (from dir... BT package /US/) because when I run the installer from the main dir, it does not recognize my BT adapter. He keeps asking to put the int bt adapter.

    I had once it works, but with the next time you start it failed once again.

    Could you please help me?

    Hello

    Therefore, it is very difficult to say what the problem is. In my opinion, it is very important that
    -Adapter USB Bluetooth is installed correctly and working properly
    -Nokia must be added and installed as a new modem
    (The Nokia modem driver must be installed)

    It is not easy to help you because More4you and all settings and options there are unknown for me.

    I think before you start doing anything check there at - it problems with the USB adapter. Next step is the installation of the Nokia modem driver. I'm sure you have some CD or you can download it from the manufacturer's website.

    Please be careful with COM ports (you can use the standard port). In my case the standard port was COM 40. The same port, you must choose to install the modem driver.

    Try again. I'm sure that there is a problem with the settings. Check all out them again.

    If you discover that a problem was it please write again.

    Good luck

  • convert itunes to mp3 for car music

    Hi Gets a new car and learns that you can plug a flash drive with Mp3 to listen to your music.  Can someone tell me a procedure to follow to select pieces of iTunes and convert it to Mp3 so I can copy them to a USB key for the car?  Thank you very much.

    Open iTunes. Go into iTunes Preferences-> general

    Click Import settings, change the format of AAC to MP3. Record.

    CTRL + click the song, select Import to MP3

Maybe you are looking for