passing parameters between framework

Similar Questions

• passing parameters between different areas to help Navigate the column

  Hi all
  
  I know I can pass parameters between the reports through a few subjects by using Url go. However, I want to keep the functionality of the menu displayed when you use defyining multi target in the s column Navigate with drop-down feature. So the problem I encountered is the sequel
  
  (1) when I set some goals to navigate - is it possible to transfer parameters to these links point to destinations? (I tried to add them at the end of the link in the field "Target", but without success)
  
  (2) or alternatively - when you use GoUrl, can I define a < would display a href link that might point to places menu and mulitple drop down?
  
  I really appreciate your help with above
  Best regards
  Wojtek
  
  Published by: user1291979 on October 7, 2009 11:51

  -without add nothing more to this link, selected GEOGRAPHY. COUNTRIES must be passed to destination and > must complete guest there? It works that way in my environment

  If you are using navigation on the current query column properties and component the dashboard then the query current source column is analyzed on the quick dash in both have SAME_TABLE. The names of SAME_COLUMN, else parameter is not parsed.

  Target: / shared/Adecco01/_portal/01 edge/weekly table dashboard
  You don't enter anything

  He must complete only the GEOGRAPHY. COUNTRIES in the reports within the area where the source report comes from?

  If you use the navigation on the properties of the column and the call to another then asks the current column is analyzed on the query target only if in the SAME_TABLE target. SAME_COLUMN value IS INVITED, another parameter is not parsed. Report of the target and the source may be on different areas but we need SAME_TABLE. Names of SAME_COLUMN.

  If you use GO URL, URL of the dashboard EDGE or the other, I already explained.

  Concerning
  Goran
  http://108obiee.blogspot.com

• passing parameters between pages

  Hello
  
  I have 2 custom pages, navigate from one page to another. I want to perform certain conditions on the other page-based features. For this I need to pass Boolean parameters between pages, but don't know how.
  
  I checked the putsession, putparameter, but somehow, they don't work.
  
  Thank you

  You can use pageContext.putTransactionTransientValue () and pageContext.getTransactionTransientValue () to pass values between pages.

  Prasanna-

• Passing parameters between sessions in openscript.

  Hello
  
  I currently have 4 scripts (test1, test2, test3 test4 - all are web database load scripts). I have 5 script (criterion 5) calling Run method of all 4 test scripts in the test1 sequence
  test2
  test3
  test4
  using the active script feature. In the stream, 1 test result should be gone to the 2 test, then test 2 uses data from test 1 and test result 2 should go to 3 and finally test 3 to test 4. Is there anyway to control the flow of data between scripts. (Basically, I want to know if test 5 the main script, anyway to control the flow of parameters among other scripts.) Any help would be really appreciated.
  
  Thank you
  John

  Hi John,.

  You define a variable with global scope in test5. If this variable will be available in all internal scripts. So update the value of the variable by the internal script will help you to transmit data between scripts.

  Thank you and best regards,
  Rajesh

• passing parameters between Forms

  Hello
  
  I want to pass the parameter between the forms. I use forms6i.
  
  Have two forms, login and loginsuccess.
  and in the login screen I need to pass parameter to the loginsuccess.
  
  Trigger when_button_pressed of the login form I wrote

  DECLARE    
     pl_id   ParamList;    
     pl_name VARCHAR2(10) := 'tempdata';  
  BEGIN
     pl_id := Get_Parameter_List(pl_name);    
       IF Id_Null(pl_id) THEN      
            pl_id := Create_Parameter_List(pl_name);  
            Add_Parameter(pl_id,'name',TEXT_PARAMETER,:txtbx1);     
            CALL_FORM('C:\test_forms\loginsuccess',hide,no_replace,no_query_only,pl_id); 
       end if;

  Now in order to get the value of 'name' in the loginsuccess what code I have to wrie?
  
  Pls help

  Hello
  Use a code like this...

  DECLARE
       pl_id   ParamList;
       pl_name VARCHAR2(10) := 'tempdata';
  BEGIN
       pl_id := Get_Parameter_List(pl_name);
       IF NOT Id_Null(pl_id) THEN
            DESTROY_PARAMETER_LIST(pl_name);
       END IF;
       pl_id := Create_Parameter_List(pl_name);
       Add_Parameter(pl_id,'name',TEXT_PARAMETER,:txtbx1);
       CALL_FORM('C:\test_forms\loginsuccess',hide,no_replace,no_query_only,pl_id);
  END;
  

  Now in order to get the value of 'name' in the loginsuccess what code I have to wrie?

  You must create a parameter called name in the form of loginsuccess in the browser of the object under the settings option.
  And you can use the value for this parameter in the form loginsuccess as...

  My_Variable:=:PARAMETER.NAME;
  

  -Clément

• Pass values between different areas on the same page.

  Hi guys!

  I'm developing a simple application where we have the list of students. I'm displaying information on a separate page for each student. Do you have any idea how and if I can pass parameters between regions, on the same page? I have a view showing, student card name information etc, and I want to create another view on the same page, which will be the student and will return a list of its subscribed courses.

  Part of my database is something like this:

  -------------

  Students

  ------------

  ID (PK)

  ------------

  -----------------------

  Student_course

  -----------------------

  ID (PK)

  Student_id (FK)

  Course_id (FK)

  ----------------------

  ----------------

  Course

  ----------------

  ID (PK)

  You have no idea how this can be done? I found information how to pass parameters between pages, but not on the same page.

  Thanks in advance!

  P.S. I am using the Application Express (declarative programming via a web browser), the use of the Application Builder.

  I discovered that I really had to. I just had to replace the "1" in my sql query with: P9_STUDENT_ID

  Thanks for your help anyway!

• How to pass parameters in Discoverer

  Hi all
  I need to recover the data from the database based on the user setting past.
  For Ex: I need to recover the data for a given day, what user has entered, which is between effectivee_start_date and end_date. can someone help how to achieve this goal we can not create parameters in discoverer.
  
  
  Thanks in advance,
  REDA

  Hello

  If you want to pass parameters of discoverer Admin, you must use the database settings. Take a look at the blog LearnDiscoverer to find out how Oracle Application HR followed by tables set an effective date that you can use when date.

  Rod West

• How to pass parameters to Date on the data model

  Hi all
  I try to pass parameters of date on the data model and unable to pull all the data. When I tried hard-coded in the SQL query, it works. Here is the data model, can I pass parameters directly to the dataquery?
  I searched a lot but couldn't find it. Any help is greatly appreciated.
  
  <? XML version = "1.0" encoding = "WINDOWS-1252"? >
  < name of dataTemplate = "AIMS_VDIS_VALIDATION_REPORT" description = 'Invalid records in the GOALS and for the given date VDIS' version = "1.0" >
  < Parameters >
  < name of the parameter = "p_start_date" dataType = "date" / >
  < name of the parameter = "p_end_date" dataType = "date" / >
  < / Parameter >
  < dataQuery >
  < SQLStatement instance name = "T4" >
  <! [CDATA [SELECT pgw_custom. Account_Validate (acct_new) invalid,
  acct_new,
  DECODE (pgw_custom. Account_Validate (acct_new), 0, 'ACCOUNT OF OBJECTIVES not VALID', 'VALID OBJECTIVES ACCOUNT') message
  Of
  (SELECT DISTINCT SUBSTR (acct, 1, 3) |) JE_CAP | SUBSTR(ACCT,8) acct_new
  Of
  (SELECT the jav.jav_hours hours,
  ACCT GCC.concatenated_segments,
  GCC.code_combination_id ccid,
  $ (bua.hourly_rate * jav.jav_hours);
  CASE WHEN (um.class2 IN (' a ',' B', 'C', d ', 'E', 'F', 'G', 'H', 'I', 'J', 'K', 'L', ',' n, 'O', 'P', 'Q', 'R', 't')) THEN '3201'
  WHEN (um.class2 IN ('Z', "ZA", "ZA1', 'W', 'U', 'V', 'X', 'Y',"ZA2","ZB","ZC","ZD", the from ')) THEN '3301 '."
  END je_cap
  OF pgw_custom.jems_aims_vehicle jav,.
  Apps.mtl_generic_dispositions mg/d,
  Apps.gl_code_combinations_kfv gcc,
  mfour.unit_main@m4prg01 uh,.
  BUA mfour.bill_unit_acct@m4prg01
  WHERE jav.jav_glaccount = mgd.segment1 AND
  MGD.distribution_account = gcc.code_combination_id AND
  JAV.jav_vehicle = um.unit_no AND
  UM.unit_id = bua.unit_id AND
  JAV.jav_project IS NULL AND
  JAV.jav_task IS NULL AND
  JAV.jav_charge_date BETWEEN: p_start_date AND: p_end_date AND
  GCC.detail_posting_allowed = 'Y' AND
  GCC.enabled_flag = 'Y' AND
  NVL (gcc.end_date_active, TO_DATE('31-DEC-4720','DD-MON-YYYY')) > = SYSDATE AND
  SUBSTR (bua.billing_code, 1, 1) = "I" AND
  ((bua.eff_dt < = (SELECT date_fin)))
  OF apps.gl_periods
  WHERE period_name = (SELECT TO_CHAR(:p_end_date,'MON-RRRR') FROM DUAL)) AND
  BUA.end_dt IS NULL)
  OR
  (bua.end_dt >(SELECT start_date)
  OF apps.gl_periods
  WHERE period_name = (SELECT TO_CHAR(:p_end_date,'MON-RRRR') FROM DUAL)))
  ORDER BY valid, acct_new]] >
  < / sqlStatement >
  < / dataQuery >
  
  < dataStructure >
  < group name = "G_ACCTS" source = "T4" >
  < element name = "VALID" value = "valid" / >
  < element name = "NEW_ACCOUNT" value = "acct_new" / >
  < element name = "MESSAGE" value = "message" / >
  < / Group >
  < / dataStructure >
  < / dataTemplate >

  the parameter name must be

  p_start_date
  p_end_date

  And when the report is run, a value must be selected in the settings. Try this default sysdate.

• Problem of JSP Page 3-frame passing parameters to OASFRAME (Start Frame)

  Hello
  
  I put in work of a JSP Page from 3-framework like the Dev Guide in the chapter entitled 'tree '. Unlike the example of the doc, I need to pass parameters to my starting framework.
  
  I am specifying the URI of the destination for the link that goes to my page 3-Frame as follows:
  OAFrame.jsp? OAFunc = XXX_NBA_OBJ_NAV_TOP:XXX_NBA_OBJ_NAV_START:XXX_NBA_OBJ_NAV_CENTRE & OAFRDIM = 30 p: 15 p
  
  but I need to pass parameters to the page of the frame to start. When I try the following, only the upper frame renders:
  OAFrame.jsp? OAFunc = XXX_NBA_OBJ_NAV_TOP:XXX_NBA_OBJ_NAV_START & objectId = 1384253 & objectType = CLIENT: XXX_NBA_OBJ_NAV_CENTRE & OAFRDIM = 30 p: 15 p
  
  How to pass parameters to the function XXX_NBA_OBJ_NAV_START?
  
  All rated help. Thank you.
  
  Concerning
  Tessa

  Hi Tessa

  the only way you can get arround this is to change the standard page of OAFrame.jsp located in $OA_HTML on your server.

  You must add the parameters on this page in the following way

  Here is an article on the OAFrame.jsp page.

  String transactionid = request.getParameter ("transactionid");
  String sessionid = request.getParameter ("sessionid");
  String frameSources = request.getParameter ("OAFunc");
  String frameDimensions = request.getParameter (OAWebBeanConstants.FRAME_DIMENSIONS);
  //
  ADDING CODE
  String values = request.getParameter ("values");
  //

  StringBuffer baseUrl = new StringBuffer (50);
  (.append("://").append) baseUrl.append (request.getScheme ())
  request.getHeader("Host")).append("/OA_HTML/"); "

  StringBuffer parameters = new StringBuffer (100);
  Parameters.Append ("& DBC ="). Append (dbcName);
  Parameters.Append ("& TransactionId ="). Append (TransactionId);
  Parameters.Append ("& SessionID ="). Append (SessionId);
  //
  ADDING CODE
  Parameters.Append ("& values ="). Append (values);
  //

  Note that this page will now receive a parameter called the values of the request and forward it to managers overtime.

  so, you can call
  OAFrame.jsp? OAFunc = FWK_TBX_TREE_CENTERFRAME:FWK_TBX_TREE_STARTFRAME:FWK_TBX_TREE_CENTERFRAME & OAHP = FWK_TOOLBOX_TUTORIAL_APP & OASF = FWK_TOOLBOX_SAMPLE_BROWSE & OAFRDIM = 30 p: 15 p & values = 'Test '.

  for example

  and in the controller for the executives, you could use

  String value = pageContext.getParameter ("values");

  Hope this helps

  Concerning
  George

• Passing variables between LabVIEW and TestStand

  Hello

  I'm just learning how to use TestStand and although there are a multitude of resources available, I always find me at a loss on how to pass variables between TS and LV, leaving me to think that there is one fundamental thing that I'm missing which is likely, given that I have a weeks experience with LabVIEW and a days of experience with TestStand.

  I took a glance to the example of 'Clusters' to the Code Modules in TestStand examples (I use TS 2016 if it matters) because I thought it would be quite ideal for what I hope. In this case, I hope to be able to pass a string (a file path) to LabVIEW and VI power take this string and use it as part of an order for the Exec.VI system.  Then, I would be able to pass strings back to TestStand to show the user if an error occurred, but I thought I should get the first part of work.

  I guess my question is what do I have to wait to see in clusters to the example of the Modules of Code? The Watch window displays all defined variables premise on which has the ContainerOut in the Variables pane, but I don't see any kind of update on facades (VI1.vi and VI2.vi) LabVIEW code. Should I be?

  I looked at a few other discussions of the forum here and here, as well as the document of the basis of knowledge here, but could not recreate their solutions. It seems that the connector pane would be a viable way to go, but I'm not sure on how we create and use effectively. According to this document , it makes it seem like it should be simple enough to makes these terminals, but I am still missing a key step. I was able to follow all the steps on the knowledge base document and run the sequence, but then had no idea if it worked or not; I have the report show me the values of the variables I put, but I have no idea whether or not he actually did anything with the LabVIEW VI, or how I could see that.

  Please let me know if you need further information or clarifaction everything I ask.

  Thank you for your time,
  JColvin

  Digilent, a company of National Instruments

  If you want to enter values, you must create a vi for instance dialog box

  

  

  The OK button will allow new values to pass to the output terminals.

  A Cancel button will pass just the original through the output values without alteration. The VI will close when either the OK button or cancel were pressed.

  Concerning

  Ray

• How to run and pass parameters to the exe file in the txt file.

  Hello

  I am facing problem with passing parameters in the .exe file, which is run by labview.firstly that I have script .txt with the settings that I have to go to the .exe file. This .exe file is also a software, and this script is written for her. And now I have to create program in labview which should satisfy the following points.

  1. I have to use a button named "Run script". If I pressed the button, it should open the browser where I can choose the script .txt file.

  2 .exe application is expected open(Path already chossen).

  3. After passing the .exe application settings should be closed.

  4 and labview should now update its parameter

  I just open using Exce.vi .exe file, but I didn't get any idea to do more than this.can someone please help me?

  Thanks norbert. CAN I love it? What should I change now? VI attached below...

• Passing parameters to dynamically loaded screws

  Hello

  I have a data acquisition application that uses an analog input, PCI-Hardware.
  With this material I enjoy different channels and display them in audio
  In operation 'Preview' I enjoy 4 channels and display them in 4 audios.
  I have therefore a quarter of the maximum sampling for each channel.
  Operation 'zoom' I only enjoy a channel (at the material max sampling rate)
  and display the data in the selected channel (the other channels are igored in zoom mode)

  My idea is to launch the different screws according to the mode (overview, zooom).
  I could imagine, that a good approach to perfom this task calls different screws
  of the main program.

  Unfortunately, I do not understand how to pass parameters to the VI if I call them
  using knots "reference open VI", "call for reference" and "close reference VI.
  I tried to understand the Labview "Example of dynamic load", but it's too complicated for me.
  Can someone give me a simple example to dynamically load the screws or y at - it white papers
  or nugets on this topic?

  
  

• Core 1 page 9-4: "...". pass data between parallel patterns... »

  «.. . If allows you to pass data between parallel block diagrams... son"this can be done?

  They mean transfers data between parallel loops/structures?

  The question is a Hue. It is not parallel, using wires. Two loops are not connected is perhaps parallel. We read your table of contents it a game of guessing on the sentence of your thread. Maybe if you get into the details.

• Pass data between panels

  I have a digital slide on a Panel. When I move the cursor, I need the value update on another Panel.

  How can I do this?

  The two panels are loaded as a senior-level windows.

  It seems that I read something on the use of queues to pass data between the panels, but I can't seem to find where I read that.

  A basic concept that differentiate the CVI to other languages, it's that there is no relationship between a sign and a specific source file. I mean, you do not need to put a sign functions in a specific source file: they can be spread over multiple sources; Conversely, you might have a source only that collects reminders for all panels of files in your application. What readers recall execution are Panel handles and control ID. (One effect of this paradigm is, you might have a reminder installed on controls on different panels).

  For this reason, there is no problem by putting the cursor callback in panel1.c. In addition, you can call the file source in a different way.

  Arriving at the base of your problem, a DAQ multithreaded application is really different from a UI single-threaded application.

  Put the functions of data acquisition in a separate thread can be beneficial for your application, because they are not likely to suffer user interface events.

  CVI provides also the different methods of transmission of data between threads. the most powerful in data acquisition applications is probably a Thread Safe queue.

  I suggest you look at Programmer's Reference > chapter of the creating multithreaded Applications to aid, where the basic principles of programming are explained multithreaded and information are provided on all instruments CVI includes.

  If you want to discuss on this scenario, I suggest yu to start a new thread, as it has nothing to do with the original question with which you started this discussion.

• Exchange of parameters between MCI and IP IVR

  Hello

  How can I get or post parameters between MCI and IP IVR. These parameters can be used for advanced control of calls, but at the moment I don't have not managed to make these components between them 'talk' with variables.

  Thank you.

  Hello

  You can use for this purpouse the 'Business Get call Info' (data of the IDC to the IP IVR) and 'Business Set call-Info' nodes (IP IVR to CIM data) to SIR script Editor.

  Select from one of the nodes properties and on the 'Général' tab you can get/set the values of the MCI devices Variables (click on the 'Add' button and in the new window you can access these variables in the "Name" drop-down list).

  You can change the "expanded call Variables" in these nodes in the tab ' Variables to call expanded.

  Hope this helps,

  Juan Luis