Passing values between reports built on a different domain

Similar Questions

• Navigate between the report and dashboard and pass values between another column

  Hello
  
  I have a question about navigate from 1 report to a dashboard page passing value from column 1 to column 2 in the second report...
  
  In OBIEE 11 G, I create link action report 1, column 1 and this link from the action is go to the content of the BI and the destination is a dashboard page, which has used 2 column as a dashboard and there are 3 reports that all use column 2 to filter. Now, the dashboard page 2 column is an alias for column 1 report 1, from the point of view of users, these are the same, but OBIEE point of view, they are different.
  
  My action link is able to access the dashboard, however, the value in column 1 which I clicked on run navigation, not are placed in column 2 as the line of dashboard does not receive this value when navigating...
  
  Since I can't put column 1 in dashboard 2, nor that I can put the 2 column in the report 1. Because our data model is done in the way that if I use column 1 or 2 in both cases, it will be o-ring...
  
  Is there a way around this problem?
  
  Let me know if I need to elaborate
  
  Thank you

  Hello

  You are going to have three main dashboard page (i.e., dashboad1, 2, 3) in the dashboard you will be having 3 different relationship with different column aliases (e.g. columnx_alias1, columnx_alias2, columnx_alias3) and you're going to have a dashboard more page say dashboardx a report with columnx. Now if you click on report of dashboard1 to go to dashboardx, click on report of dashboard2 also should go to dashboardx, click dashboard3 report should also go to dashboardx.

  1 > you can create 3 variable presentation for column 3 aliases and hide. {{{You can use the union query in sql result say columnx select from table where columnx='@{column1}' union select columnx table where columnx='@{column2}' union select columnx table where columnx='@{column3}'.
  2 > now you can hide these guests with variables.

  Please let me know if you are facing a problem.

  Thank you
  Yacoub

• Pass values between different areas on the same page.

  Hi guys!

  I'm developing a simple application where we have the list of students. I'm displaying information on a separate page for each student. Do you have any idea how and if I can pass parameters between regions, on the same page? I have a view showing, student card name information etc, and I want to create another view on the same page, which will be the student and will return a list of its subscribed courses.

  Part of my database is something like this:

  -------------

  Students

  ------------

  ID (PK)

  ------------

  -----------------------

  Student_course

  -----------------------

  ID (PK)

  Student_id (FK)

  Course_id (FK)

  ----------------------

  ----------------

  Course

  ----------------

  ID (PK)

  You have no idea how this can be done? I found information how to pass parameters between pages, but not on the same page.

  Thanks in advance!

  P.S. I am using the Application Express (declarative programming via a web browser), the use of the Application Builder.

  I discovered that I really had to. I just had to replace the "1" in my sql query with: P9_STUDENT_ID

  Thanks for your help anyway!

• Passing values between tabs, using a structure of housing.

  At the risk of exposing my ignorance, I have a problem of substance; How to pass values in a controlled tab structure of the case.

  I have a simple user interface that uses a control tab control container a structure of all cases wrapped in a while loop. I use

  LabVIEW 2012.

  The basic intent is to run VI in tab 1, whose results would be available for the VI tab 2 ect...

  (See the attached example; an experience I wish that changes to the controls to page 1 int & string will appear

  the indicators corresponding to page 2).

  I can "pass" the values of a case outside the case itself (through a tunnel of output) structure, but can't seem to do

  available for all other cases by a tunnel entrance.

  I tried to tunnel of the case in a registry to lag on the while loop, but am upset by retrieving that data again in another case.

  I tried to use local variables, but obviously do not understand the paradigm brought LabVIEW for variables. I can create a local

  variable but can't seem to 'plug in' to an indicator on the second page.

  First question: is a reasonable method for execution of the loop control program structure business controlled within a certain time tab?

  I chose it because I have literally dozens of parameters to define, validate and want to manage Visual space

  for the operator. For example, I would that this sequence:

  1. Question and list of facilities available on my PC
  2. Select a device to use, make sure it works properly
  3. Set the parameters for this particular device (30)
  4. run the device, collect data and save the results

  Second question: it is clear that I don't know how to use variables, and the examples I read involve transmission of data to parallel structures

  and not in a case. Is a local variable to a reasonable method of transmission of data between the "tabs"? I will gladly make

  accept the reprimand to 'RTFM' until 'FM' required is identified.

  Thank you in advance for your kind attention to my wisely first year survey

  Shift registers are simple to get data from.  Where is your problem with their use?  However, have you considered just using the terminals directly in the case of the Page 2?

  You must learn to use the Structure of the event.  You shouldn't care what tab you are on.  It's all in the same VI.  Therefore use a Structure unique event for all your control value changes.

  

• Reports 2-navigate and pass values between 2 different columns

  Hello
  
  I have a question about navigate from 1 report to another while passing the value of column 1 to column 2 in the second report...
  
  In OBIEE 11 G, I create link action report 1, column 1 and this action link is access BI content and the destination is report 2. Now, report 2 column 2, which is an alias for column 1 report 1, from the point of view of users, these are the same, but OBIEE point of view, they are different.
  
  My action link is able to navigate to point out 2, however, the value in column 1 which I clicked on run navigation, not transmitted in column 2 in the report 2...
  
  Is there a way around this problem?
  
  Let me know if I need to elaborate
  
  Thank you

  Hello

  1 > create a report with the column 1 and column 1 of the brand is requested in this report (this will be your interim report).
  2 > in the second report of the condition implemented column2 filter is equal to (filter based on another through the analysis of the above-mentioned report and give the column).

  Please let me know if it solves your problem.

  Thank you
  Yacoub

• passing values between different vi

  Hi guys, it's perhaps a question very basic but could not able to find the solution.

  I have main Vi and one under Vi, in which my main vi produces random data and send it to the Subvi. Here, I want to open the window of Subvi permenently I wanted to say that if I click on the display button, the value has to get the update, but in the example attached each time on the screen flashes because of the reason each time is called, I even tried passing random values using a queue more and read in the Subvi nthng work, thanks in advance,

  John

  Hi John,.

  One of the causes of her flashing, it's the sub vi property has been set to 'Close thereafter while initially closed'.

  Even if you set the "sub - VI Configuration node... ' to 'Close thereafter while initially closed'.

  The two places must be defined correctly.

  I've done a few other mods. See if it's what you wanted.

  Steve

• Passing values between form

  Hi all!
  
  I have a small question. I started to work on ORacle APEX today and have to pass on the value of my Login Page to the employee detail Page. I know that there is a similar to position
  How to pass a value in form
  But I could not get my reply in this way. As I am lack of time, I can't get a lot.
  
  Scenario:
  
  Login page has P111_EMP_NO AND P111_PASSWORD. On submit, there is a process called "Login", where he calls a custom authentication package and verifies its authenticity. After its success, I want this P111_EMP_NO to go to the details used report Page where it displays information about the employee.
  
  Your help is appreciated.
  Thank you

  Hello

  The value contained in P111_EMP_NO should be available in the APEX provided the substitution string "APP_USER.

  http://download.Oracle.com/docs/CD/E17556_01/doc/user.40/e15517/concept.htm#sthref166

  CITY

• Pass values between components

  Hello, this is my first questions in this forum and I hope that someone can help me.

  I use components in my application and I want to get a single value that I create a component in another component. I know that there is more that I can do in different forms, but I just want to choose the best. Here's the code to better explain my questions.

  Component1:

  <mx:Canvas xmlns:mx="http://www.adobe.com/2006/mxml" width="164" height="36"> 
     <mx:Script> 
        <![CDATA[ 
            
         //Metemos el id de la cuenta que queramos cargar 
         public function queCuenta():Number { 
              var idAccount:Number = Number(accountnumber.text); 
              return idAccount; 
         } 
        ]]> 
     </mx:Script> 
     <mx:TextInput id="accountnumber" x="74" y="8" width="36"/> 
     <mx:Label x="25" y="10" text="Cuenta" width="62"/> 
     <mx:Button x="118" y="8" label="OK" width="42" click="queCuenta()"/> 
      
  </mx:Canvas>

  I want to use idAccount in another component. I want to print this number in an another component label. What is the best code what to do?

  Thanks and sorry, but my English is not very good.

  It is placed before the script tag, I mean inside the main tag.

  as:

  http://www.Adobe.com/2006/mxml"width ="164"height ="36">

  [Event (name = "valueChanged", type = "flex.events.Event")]

  .

  .

  .

  .

  seems you have to study a little more about custom events:

  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=createevents_1.html

• passing parameters between pages

  Hello
  
  I have 2 custom pages, navigate from one page to another. I want to perform certain conditions on the other page-based features. For this I need to pass Boolean parameters between pages, but don't know how.
  
  I checked the putsession, putparameter, but somehow, they don't work.
  
  Thank you

  You can use pageContext.putTransactionTransientValue () and pageContext.getTransactionTransientValue () to pass values between pages.

  Prasanna-

• passing parameters between different areas to help Navigate the column

  Hi all
  
  I know I can pass parameters between the reports through a few subjects by using Url go. However, I want to keep the functionality of the menu displayed when you use defyining multi target in the s column Navigate with drop-down feature. So the problem I encountered is the sequel
  
  (1) when I set some goals to navigate - is it possible to transfer parameters to these links point to destinations? (I tried to add them at the end of the link in the field "Target", but without success)
  
  (2) or alternatively - when you use GoUrl, can I define a < would display a href link that might point to places menu and mulitple drop down?
  
  I really appreciate your help with above
  Best regards
  Wojtek
  
  Published by: user1291979 on October 7, 2009 11:51

  -without add nothing more to this link, selected GEOGRAPHY. COUNTRIES must be passed to destination and > must complete guest there? It works that way in my environment

  If you are using navigation on the current query column properties and component the dashboard then the query current source column is analyzed on the quick dash in both have SAME_TABLE. The names of SAME_COLUMN, else parameter is not parsed.

  Target: / shared/Adecco01/_portal/01 edge/weekly table dashboard
  You don't enter anything

  He must complete only the GEOGRAPHY. COUNTRIES in the reports within the area where the source report comes from?

  If you use the navigation on the properties of the column and the call to another then asks the current column is analyzed on the query target only if in the SAME_TABLE target. SAME_COLUMN value IS INVITED, another parameter is not parsed. Report of the target and the source may be on different areas but we need SAME_TABLE. Names of SAME_COLUMN.

  If you use GO URL, URL of the dashboard EDGE or the other, I already explained.

  Concerning
  Goran
  http://108obiee.blogspot.com

• Pass values of interactive report

  
  Hello

  I'm sure this is an easy question, but I was not able to find the solution myself.

  I have an interactive report that has 6 columns, which are:

  Family name

  First name

  Day

  Start time

  End time

  Link column

  I need to assign an ID that is not displayed in the report, the date, the start time and end time to the variables P5_IDX, P5_DAY, P5_START and P5_END to use

  only display on a different page elements.  I can spend only 3 values by using the link to the column in the IR.

  Is there another way to pass values more of an interactive report 3?  Sorry if this has been asked and answered before.  I searched the forums and didn't find an answer, but maybe a search with key words evil.

  Thanks for any help,

  Bob

  Hi Bob,

  If yu changes the target of the link of "page of this application" to "URL", you can set the URL yourself and add more parameters,

  URL could look something this:

  f? p = & APP_ID.: 11: & SESSION. : & DEBUG. : P11_ID, P11_P1, P11_P2, P11_P3:, #ID #, # P1, P2 # #, #P3 #.

• How to pass value with room settings using URLs GO

  Hi all
  
  I use GO url to a report that comes from a different domain. I used is invited and all in the target report. All valuses come in the report target with filtered according to the recording of line condition. But what value is to have a sound space creating problem and showing instead of the entire report of the same rank value. How to solve this problem. Is there any format pass parameter that can ve a value with a space between the two.
  
  Once again, when I go to the report target with GO url link his watch not download or link back. Can help in this regard too
  
  Thank you

  Put a Replace function...

  '||' Click to see the ingredient details | »

• Passing variables between LabVIEW and TestStand

  Hello

  I'm just learning how to use TestStand and although there are a multitude of resources available, I always find me at a loss on how to pass variables between TS and LV, leaving me to think that there is one fundamental thing that I'm missing which is likely, given that I have a weeks experience with LabVIEW and a days of experience with TestStand.

  I took a glance to the example of 'Clusters' to the Code Modules in TestStand examples (I use TS 2016 if it matters) because I thought it would be quite ideal for what I hope. In this case, I hope to be able to pass a string (a file path) to LabVIEW and VI power take this string and use it as part of an order for the Exec.VI system.  Then, I would be able to pass strings back to TestStand to show the user if an error occurred, but I thought I should get the first part of work.

  I guess my question is what do I have to wait to see in clusters to the example of the Modules of Code? The Watch window displays all defined variables premise on which has the ContainerOut in the Variables pane, but I don't see any kind of update on facades (VI1.vi and VI2.vi) LabVIEW code. Should I be?

  I looked at a few other discussions of the forum here and here, as well as the document of the basis of knowledge here, but could not recreate their solutions. It seems that the connector pane would be a viable way to go, but I'm not sure on how we create and use effectively. According to this document , it makes it seem like it should be simple enough to makes these terminals, but I am still missing a key step. I was able to follow all the steps on the knowledge base document and run the sequence, but then had no idea if it worked or not; I have the report show me the values of the variables I put, but I have no idea whether or not he actually did anything with the LabVIEW VI, or how I could see that.

  Please let me know if you need further information or clarifaction everything I ask.

  Thank you for your time,
  JColvin

  Digilent, a company of National Instruments

  If you want to enter values, you must create a vi for instance dialog box

  

  

  The OK button will allow new values to pass to the output terminals.

  A Cancel button will pass just the original through the output values without alteration. The VI will close when either the OK button or cancel were pressed.

  Concerning

  Ray

• Pass data between panels

  I have a digital slide on a Panel. When I move the cursor, I need the value update on another Panel.

  How can I do this?

  The two panels are loaded as a senior-level windows.

  It seems that I read something on the use of queues to pass data between the panels, but I can't seem to find where I read that.

  A basic concept that differentiate the CVI to other languages, it's that there is no relationship between a sign and a specific source file. I mean, you do not need to put a sign functions in a specific source file: they can be spread over multiple sources; Conversely, you might have a source only that collects reminders for all panels of files in your application. What readers recall execution are Panel handles and control ID. (One effect of this paradigm is, you might have a reminder installed on controls on different panels).

  For this reason, there is no problem by putting the cursor callback in panel1.c. In addition, you can call the file source in a different way.

  Arriving at the base of your problem, a DAQ multithreaded application is really different from a UI single-threaded application.

  Put the functions of data acquisition in a separate thread can be beneficial for your application, because they are not likely to suffer user interface events.

  CVI provides also the different methods of transmission of data between threads. the most powerful in data acquisition applications is probably a Thread Safe queue.

  I suggest you look at Programmer's Reference > chapter of the creating multithreaded Applications to aid, where the basic principles of programming are explained multithreaded and information are provided on all instruments CVI includes.

  If you want to discuss on this scenario, I suggest yu to start a new thread, as it has nothing to do with the original question with which you started this discussion.

• Passing values to stored 'IN' Clause

  Hi all:
  
  I'm trying to pass values to a stored procedure to use in an IN clause and get an "ORA-01722: invalid number."
  
  I think it has something to do with how .net manages channels and how I'm moving to my stored procedure.
  
  The values I know there IN (2, 1) to the stored procedure work and I built a routine that creates a string value to pass to the format "2, 1, but I think because this value is defined as a string in the code .net, the leader and the apostrophe is at the origin of the problem in the stored procedure.
  
  I have in my .net code the following:
  oCommand.Parameters.Add ("groupID_", OracleDbType.Varchar2). Value = GroupID;
  Where GroupID is defined as a string of character and values the following: 2, 1, but because of the way .net manages it, happening as "2, 1".
  
  Then of course, within my procedure stored,
  CREATE OR REPLACE PROCEDURE PAYSOL.sp_ProjectsManAppAndFundRpt)
  p_Cursor1 ON SYS_REFCURSOR,
  p_Cursor2 ON SYS_REFCURSOR,
  p_Cursor3 ON SYS_REFCURSOR,
  p_Cursor4 ON SYS_REFCURSOR,
  p_Cursor5 ON SYS_REFCURSOR,
  groupID_ IN VARCHAR2)
  
  where I am setting the parameter groupID_ as a VARCHAR2, is keep the apostrophes, causing problems when I use it in my IN clause:
  AND IN S.GroupID (groupID_)
  
  What should I do to pass this value correctly? Is there something I can do inside the stored procedure to strip these characters, or what I need to transmit differently, or completely change how I'm this treatment? I don't know the right path for upside down, so I wanted to ask for help.
  
  Thank you
  Andy

  IN the Clauses and parameterized queries can be stupid delicate; Thus, while logically it makes sense to do what you want (it doesn't in database!)

  You can manage this problem in several ways:
  (1) anonymous sql (do not recommend)
  (2) a user defined type and function as such

  --see  http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:210612357425
  --create a table of numbers ,create a function to split the "where" into a table
  --then return the data
  CREATE OR REPLACE type numberTableType as table      of number;
  /
  create or replace function in_number(  p_string in varchar2 ) return numberTableType  AS
          l_string        long default p_string || ',';
          l_data          numberTableType := numberTableType();
          l_number        number ;
          N               NUMBER;
      BEGIN
  
        loop
            exit when l_string is null;
            n := instr( l_string, ',' );
           l_data.extend;
           begin --is user inputs a non-numeric value  skip the value
              l_number := cast(ltrim( rtrim( substr( l_string, 1, n-1 ) ) )  as number);
              l_data(l_data.count) := l_number ;
              EXCEPTION
                      WHEN VALUE_ERROR THEN
                          l_number := 0;
                      WHEN OTHERS THEN
                          raise ;
           end ;
           l_string := substr( l_string, n+1 );
      end loop;
      RETURN L_DATA;
    END in_number;
    /
  
  ...
  --then your code
  AND S.GroupID IN (select column_value from table(in_number(groupID_))
  

  (3) in fact, just look at this blog! It does a better job at what I am!
  http://tkyte.blogspot.com/2006/06/varying-in-lists.html