password entry dialog box

Similar Questions

• Interface API - menu of the bottom and the entry dialog box?

  Hello!

  It would be preferable if a widget is very similar to a native application on BlackBerry so I am just wondering if there is something like an entry dialog box?

  Like 'Please enter a location"'_' (OK)

  Another thing I would really like to: in some applications like BlackBerry map or calendar, there is a standard menu on the bottom of the screen. Is there a Widget API for this?

  Kind regards

  Alex

  The jump on a fixed positioned div is something you will see on a real device as well.  This is a limitation of the BlackBerry browser when scrolling with content in a fixed position.

  From what you describe, sounds like you want as the toolbar which is available on the device of the storm that allows you to add 4 buttons at the bottom of the screen.  We do not currently have an API available that you activate the toolbar of the storm.

  However, I have seen others accomplish this effect even by an array of the size of the screen and then have a scrolling div statement positioned to the upper part of the screen and then the cells for the buttons at the bottom of table.  That would be usable for touchscreen and trackpad/trackball devices.

• Problem with finishing install Flash Player on Mac. With the completion by entering the password required dialog box stirs as if the p/w is not valid. But it works in the Adobe site.

  I am trying to install Flash player on my Mac. All the steps work as it should, to the point where I asks me to enter my password. I do this, and the dialog box moves as through the p/w were not valid. However, it works to connect you to the Adobe site. I just changed to be safe and checked again.

  There is no password required to download or install the Flash Player.  Chances are your Mac is that you have to enter his password to allow the installation to occur.

• 'Guest user' entry by default dialog box

  I am trying to create an entry 'Interrogate the user' custom, where the entry dialog box will always be displayed default value when the VI is called. I have a main VI, calling an updated updated him 'interrogate the user' VI. Below the code is changed by the series LV questioning the user. "Default_Serial" control is wired to the connector as input pane.

  

  Then, the main VI looks like this.

  But it does not work. Can anyone help?

  Just use the wire of the error so that it comes out the reset node and goes into the node value when you set the value.  It would be much more simple and you wouldn't need a sequence structure.

• I can't paste my password for the private key in the dialog box

  I use Thunderbird on Ubuntu 14.10 with Enigmail GPG encryption. When Thunderbird needs my password, a dialog box appears asking for it, but it won't let me paste the password into the dialog box. I use a completely random sentence of 64 characters, including special characters, and I can't sit and type the thing every time. I need to be able to stick my password manager. I do not know if it is a problem of Thunderbird, or if it is with Enigmail or Ubuntu. Any advice would be appreciated.

  Thank you!

  -chriscrutch

  Although I do not use Enigmail and therefore do not have actual knowledge, you need, I found some information that may help you.

  • https://sourceforge.NET/p/Enigmail/forum/support/thread/1bf22904/?limit=25
  • http://AskUbuntu.com/questions/688681/Ubuntu-15-10-changed-GPG
  • https://makandracards.com/makandra/941-using-GPG-PGP-with-Ubuntu-and-Thunderbird

• Dynamic dialog box object

  I created a dynamic stamp which has an object for the user entry dialog box. My problem is that I have 16 text fields that should be entered. Everything works fine, but the object dialog box is in time for the screen.

  What I want to do, is to have my static_text and my item_id on the same line. For now, the static_text is on one line and the item_id is below.

  Thank you for your help...

  Luanne Austin

  You can do this by wrapping your static text and text entry field in a "view":

  {
    type: "view",
    align_children: "align_top",
    elements: [
    {
         type: "static_text",
         item_id: "sta1",
         name: "static 1:",
         width: 60,
         char_width: 15,
    }, {
         item_id: "fld1",
         type: "edit_text",
         width: 75,
    }
    ]
  },
  

• How to stop a new dialog box to come while I get my master password?

  When I first get a Web page with a password on file Firefox invites me for the password. I was having repeated trouble with a new master password dialog box opening and taking emphasis until I have finished to enter the password.

  Now that I know what is happening I can cancel the new dialog box and complete my entry, but it is
  really annoying and distracting.

  Any help would be appreciated.

  FRED.

  Your post gave me the necessary idea. I simplified the start as much as possible by defining a blank home page. Now if I wait a few seconds a single guest, which I suppose is the one who me, disrupted for the password appears. It seems maybe because I have sites with connections saved on My Favorites bar. I intend to investigate further.

  In all cases, it is a more comfortable solution that the insertion of an add-on.

  Thanks for your help.

  FRED.

• Save password on the wrong web page dialog box

  Hello
  I was unnecessarily save password dialogn on the page account rather than a web page of signIN.aspx. In the page, I have tabs. One of the tab, contains a user control to change password. Another tab contains a links to the history of orders.

  Once I click on the history of the order No. #, automatically change password dialog appears from nowhere I went through the source code and found out, the Web page contains OldPassword and NewPassword fields in divChangePassword.

  Please let us know, how to fix this bug. It does not appear on all other browsers.

  Kind regards
  Sriram

  If there are fields of password on a web page, you can't possibly avoid this dialog box.

  All these fields are visible, or some are hidden.

  You could try to hide certain fields if they are now to see if that helps.
  You can do this with userChrome.css code or the Stylish extension.
  The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  Otherwise, you have to take more drastic measures and remove these fields.

  • Nuke whatever it be strengthened: https://addons.mozilla.org/firefox/addon/nuke-anything-enhanced/
  • Delete permanently (RIP): https://addons.mozilla.org/firefox/addon/remove-it-permanently/

• The master password dialog box is not well labeled. No luck, it could be spoofed using JS and someone could then access all passwords?

  IMO, request master password dialog box is not well labeled, and its identity (and authentic) seem a little in doubt whenever it appears. It is possible that someone could be spoof using JS and I could unwittingly put my "skeleton key" to a thief? Please tell me I'll be paranoid!

  I don't think a script in an ordinary web page has the permission to read your passwords for other Web sites, even if you are not using a master password. It should be limited to see what password manager fills in the page.

  For this reason, even if a page has captured your master password, I don't think that he could use it in a harmful way. But I'm maybe not quite devious.

• No access to the dialog box remember password

  Experienced troubleshooting helps the steps and nothing. No, I'm not private browsing (nothing to hide), and all the settings are correct.

  The latest version of FF on a new machine (Dell XPS17). I do not get a password dialog box do not forget when I go to my normal password required sites. I have the key to the left of the address bar icon. I can click on it throughout the day and all over the place, but never the password dialog box pops up.

  The machine came with McAfee installed, but I never activated. The password problem existed from the moment wherever I installed FF while McAfee was still here. Since then, I uninstalled McAfee and installed a real antivirus (AVG). There is no settings in AVG that remove password records and McAfee has disappeared. I even checked to see if the problem of password in FF existed between McAfee and AVG, and he did. So there must be a problem somewhere between FF13 and Win7.

  Any ideas?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  See also:

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• My IMAC froze this morning so I had to turn it off and when I turned it back on I got a new dialog box where it says that the Developer Tools Access needs to take control of another process for debugging continue and wants my password

  I do not recognize the information dialog box, and I have never seen this. So I don't want to give my password for changes to my IMac until I know what he does.

  Never enter your password to something that you do not recognize.

  Re: Strange dialog boxes popping up!

• Why as I get dialog boxes to enter my icloud Keychain password?

  When I restart or unsleep my Mac, I have a series of dialog boxes asking my icloud Keychain password. I agree that none of the applicants programs are. For example, now requires "accountsd" - what is that? I can't cancel either out of it.

  NB: I'm not a big cloud user, but I think that I logged in recently in it without the intention to use it for much. But I think that it is has triggered a chain reaction that I can't stop.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Place the following in the trash, then restart.

  Close all running applications. Put the following in the Trash:

  (1) in the folder ~/Library /, put the Caches folder to the trash.

  (2) in the ~/Library/Application Support / folder, put iCloud folder to the trash.

  (3) in the ~/Library/Preferences folder /, put the MobileMeAccounts.plist file in the trash.

  Taken from Kurt Lang

• Dialog box retains the entries

  Hello world

  I created a box of script and dialogue for the people in my office to use. I intend for people to take what I've created and save it to their computer this way with the master copy never gets dirty. In this dialog box, the user must enter a number of variables and test settings that I saved as variables such as T1, L1, R1,... etc. Is it possible that when you close diadem and reopen the data of a former test that you can fill out the dialog box with entries that have previously been entered. Now everthing resets to 0 if you completely close Diadem. Because the way in which there are a number of fields, you must enter it would be pretty annoying to have to fill it every time. I am currently using Diadem 2015. Unforunately I don't think that I can provide this code and dialog box to you guys so I hope it's clear enough.

  Thanks for any help

  So I found a solution to my problem. The way I solved the problem and was able to keep the values in the dialog box was using a global dimension and create a channel to store these values.

  If groupindexget ("VariablesV2") = 2 then ' occurs when there is a variable channel

  GlobalDim1 = CHDX (1,2)
  Call SUDDlgShow ("Dlg1", MyFolders (0) & "NoName.SUD", NULL)
  ChD (1, "VariablesV2/TestVarChanName") = GlobalDim1

  else ' happens when there is NO variable channel

  Group = "VariablesV2."
  Call GetCreateGroup (Group)
  TestVar1 = GetChannel ("TestVarChanName", 1, "Digital", group)
  Call SUDDlgShow ("Dlg1", MyFolders (0) & "NoName.SUD", NULL)
  ChD (1, "VariablesV2/TestVarChanName") = GlobalDim1
   
  End if

  Basically, what it does is check if the variable group is present as the second group. If it isn't then it creates the group, then channels, I need. I then called the dialog box where I can enter the values in the text box who assined to the variables 'GlobalDim1' which he. I then store this value in the channel that I just created. When I reload the tiara, the script will see this channel, open the dialog and display this value and I can then choose to change this value or would it be let. I won't say it's the best way to do it, but until now it works. I'll see how it behaves when I have a long list of variables/channels.

• Dialog box asking administrator password when installing Security Essentials.

  Hi, I messed up my computer laptop girls while trying to set up for him. My account had me as admin, but as I downloaded security essentials is a dialog came asking if I had started this procedure. I clicked Yes, then the dialog box asks the administrator. the password that I've not enabled. Am I just missing the admin.account when I pick it up or am I just a standard user in the future that cannot get its essentials? Laughing out loud.

  Original title: my user account changed

  Hello

  • What operating system do you use?

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account

  http://support.Microsoft.com/kb/940765

• My Wi - Fi Protected Setup Wizard connection dialog box in the Intel PROSet /Wireless connection utility won't let me get caught in the password for my BigPond router.

  Dialog box of connection Wi - Fi Protected Setup Wizard in the Intel PROSet /Wireless connection utility

  My Wi - Fi Protected Setup Wizard connection dialog box in the Intel PROSet /Wireless connection utility won't let me get caught in the password for my BigPond router. He let me just plug in numbers not letters. Can someone tell me how to work around this problem?

  Hello

  This can happen if the configuration of the router is configured to accept the password in numbers. You can get in touch with Bigpond support for more information on this.

  Technical assistance to BigPond