No access to the dialog box remember password
Experienced troubleshooting helps the steps and nothing. No, I'm not private browsing (nothing to hide), and all the settings are correct.
The latest version of FF on a new machine (Dell XPS17). I do not get a password dialog box do not forget when I go to my normal password required sites. I have the key to the left of the address bar icon. I can click on it throughout the day and all over the place, but never the password dialog box pops up.
The machine came with McAfee installed, but I never activated. The password problem existed from the moment wherever I installed FF while McAfee was still here. Since then, I uninstalled McAfee and installed a real antivirus (AVG). There is no settings in AVG that remove password records and McAfee has disappeared. I even checked to see if the problem of password in FF existed between McAfee and AVG, and he did. So there must be a problem somewhere between FF13 and Win7.
Any ideas?
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.org/KB/safe+mode
Try turning off hardware acceleration.
- Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
See also:
Tags: Firefox
Similar Questions
-
I have iAntivirus, not Norton or McAfee. Wanted to install "remember passwords" and "remember pass" are not add-ons, but the key to the right arrows and after removing these 2 modules I can't check the box "remember password for sites". What should I do? I really want to save my passwords.
Hello romkom, you can not save passwords when you chose to always run firefox in private browsing mode in the Preferences > privacy Panel...
-
The box "remember passwords" is grayed out, I can't tell Firefox that I want to save passwords. I don't use private browsing. How can I get for a grey box?
Thank you very much. Tried everything to no avail. This change solved the problem easily.
-
Firefox does not ask me to remind passwords even if I ticked the box "Remember passwords" in the Security tab.
Hey groveman21,
Have you looked at the section of the Base names of users and passwords are not saved ? There are lots of good information in there.
If it's only a particular site, you experience problems with, you can also delete cookies from this site in order to make the site you not forget if you have created a remember me cookie by visiting to Tools > Options > privacy > Cookies: "Show Cookies" that there could be a "don't remember" cookie for this site.
Hope this helps!
-
Impossible to close or to access the dialog box
within a Web site "forms", the dialog box is open, but I don't see the buttons "ok/Cancel". nothing happens when I click on the button (cancel or ok) and I cannot close firefox. use "quite the force" to solve the
Hi imlostinspace.
Looks like you may need to add a cookie for this site. This article describes how to do this:Solve connection problems on Web sites that require a user name and password
Hope that helps.
-
Cannot access the dialog box when I right click
I have a laptop with Vista Ultimate. Previously, I was able to right click on the desktop to access the dialog box. I can do it no longer. Can anyone provide a solution.
To toggle to the current user
Start > run > Regedit
Goto registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
Modify/create the types of data accepted by value and value name (s) as described below.
Data type: DWORD / / value name: NoViewContextMenu
For value data: [0 = off / 1 = on]
Restart and exit RegistryTo turn to Local computer
[Start] [Run] [Regedit]
The registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer
Modify/create the types of data accepted by value and value name (s) as described below.
Data type: DWORD / / value name: NoViewContextMenu
For value data: [0 = off / 1 = on]
Restart and exit Registry -
I can't paste my password for the private key in the dialog box
I use Thunderbird on Ubuntu 14.10 with Enigmail GPG encryption. When Thunderbird needs my password, a dialog box appears asking for it, but it won't let me paste the password into the dialog box. I use a completely random sentence of 64 characters, including special characters, and I can't sit and type the thing every time. I need to be able to stick my password manager. I do not know if it is a problem of Thunderbird, or if it is with Enigmail or Ubuntu. Any advice would be appreciated.
Thank you!
-chriscrutch
Although I do not use Enigmail and therefore do not have actual knowledge, you need, I found some information that may help you.
-
When I get an attachment to an email (using Zimbra Imail, Firefox, Windows XP Pro) and I click on it and select 'Download', I get the dialog box "enter the name of the file to save on...» "(because I already have the option"always ask me where to save files. "But the view of default file always in a 'list '. At least recently. I don't remember it always does this. In any case, I want the value default to a 'Détails' view, in ascending order, I can find then things so much faster that way. (I often use the 'Update' tab to bring up, the latest version of a file.) I know that I can go to the Menu 'view' icon and select 'Détails', but whenever I go in a sub-folder in this dialog box, I have to do this all over again and it wastes a lot of time and attention.
I did some research on the internet but have not found a way to solve this problem.
Try this:
a. open my documents, press the alt key.
b. click on Tools. Click on folder options.
c. click on the view tab and select Reset and check records.
-
How can I activate the "do not show this again" when the dialog box appears whenever I try to download a picture to another location?
The dialog box that appears frequently when I try to convert or download photos, shows the shadow of this question - I want to make it active until the times dialog box stops appearing I scroll the photo folders.
Thank you
I got the last part of what you wanted, which was simply not the message
The key is that you have to allow this program through your windows firewall.
Go to your look for the windows Firewall Control Panel,
There should be a list to allow a program through windows firewall, look at the top left.
If you feel safe doing this, vlc is not one that I would feel safe with, but to you, it has a function to browse to find the program to be added to your trusted list or access through your firewall.
Still, it may give you a warning but could release the message?
-
When you delete a file in Windows Vista, the dialog box remove don't close until the computer is restarted. It is sometimes possible to remove it by closing tha task list. When this is done, the Explorer is closed and restarted.
Hi Brian,.
(1) since when are you facing this problem?
(2) remember to make changes?
Method 1: Run the fixit available in the link below and check if that makes a difference
Difficulty of broken desktop shortcuts and common system maintenance tasks
Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to resolve missing or damaged on Windows Vista or Windows system files
http://support.Microsoft.com/kb/929833
Method 3: Select the boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
-
Could not open the dialog box of .msi files saying find a program to open the file type
In time, I used msi files to install many programs. But I know longer really since then, msi files could not open. Now, I can't open the msi installer, which I had used to install programs. When I click on the msi file, it displays a dialog box saying find a program to open the file type.
Hello
- Were there some recent changes to the computer before the show?
Method 1: I suggest you unregister and re - register the windows setup program and check if that helps you. To do this, please follow the steps below:
Unregister and register the Windows Setup program again
(a) click Start, click run and then type cmd in the dialog box, and then click command prompt.
(b) at the command prompt, type the following and press ENTER after each line:
MSIExec /Unregister
MSIExec/regserver
Method 2: When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program.
http://support.Microsoft.com/kb/950505/
Method 3: Change default programs using Set Program Access and computer defaults:
http://Windows.Microsoft.com/en-us/Windows7/change-default-programs-using-set-program-access-and-computer-defaultsChanging the programs Windows uses by default: http://windows.microsoft.com/en-US/windows7/Change-which-programs-Windows-uses-by-default
Hope this information is useful.
-
March 2011 the dialog box print Adobe recently becomes too big
RECENTLY, possibly after agreeing an Adobe upgrade, I can no longer access the button 'ok' in the print dialog box. The box is too large to be completely visible. What should I do to make things for the parameters I used a couple of weeks. I made NO changes. I've printed PDF files recently, cannot now.
Thanks to a few simple, easy to follow help.
Hello
1. what upgrade Adobe do you have installed?
2. not this problem only occurs when you try to print from Adobe?
a. you can resize the dialog box by going into a corner and get the arrow to decrease the size of the dialog box.
b. you can also change a smaller screen resolution to see if that helps.
Check out the link:
Change your screen resolution
http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution
c. also, you can use your scroll button and hold down the ctrl key at the same time. It changes your whole screen turned to more or less important.
You can also visit the Adobe support links and check if it helps:
Resolve PDF printing problems. Acrobat, Reader
http://kb2.Adobe.com/CPS/873/cpsid_87346.html
http://forums.Adobe.com/thread/391730
Hope this information is useful.
-
Redirect when press button ok on the dialog box
Hello
How can I redirect the user when you press the button on a dialog box?
Thank you
adrianeireyahoo wrote:
OK, but how to get to the ok button.
Dialog.Alert ("cannot send results, check the connection, please try again");
Why do you need to access the OK button of the alert? Just do what you want to do after the display of the dialog box - the statement after Dialog.alert will be reached only after the user presses the OK button (in general). If you want to detect if the user rejected the dialogue this or any other way, create your own one, doModal on it and analyze the returned result:
Dialog myWarning = new Dialog(Dialog.D_OK, "Unable to send results, check connection, please try again", Dialog.OK, Bitmap.getPredefinedBitmap(Bitmap.EXCLAMATION), 0L); if (myWarning.doModal() == Dialog.OK) { // OK button was pressed - do what you need here ... }
-
My CRM is created through Lotus Smartsuite approach and it is sitting on a server. Access us this server via remote desktop.
When you access via Windows XP and older, you can consider all messages dialog box. However, when you access it through Windows 7, all messages to the dialog box disappear.
Can someone shed light on this and suggest the remedy?
See: http://playbyear.com.my/docs/StatusBlank.PNG
Thank you.
Alex
Hello
The question you have posted is related to CRM and would be better suited to the TechNet community.
Please visit the link below to find a community that will provide the support you want.
http://social.Microsoft.com/forums/en/CRM/threadsI hope this helps.
-
Area of the dialog box open in Apex 5
Apex 5.0
Firefox
I'm playing with Apex 5 and I wanted to open a dialogue on the click of a button
Created a region with a region called dialogue region dialog box template
Created a button called OPEN
Created a dynamic of Action
Event: click on
Selection type: button
Button: OPEN
Action: show
Selection type: region
Region: Region of dialogue
When I open the page in the area of the dialog box is not displayed as expected.
When I click the button nothing happens
Gus
Do not know if Oracle people want the articles published here on 5 APEX, you COULD add this to their comments that you can access in your workspace...
Thank you
Tony Miller
Software LuvMuffin
Ruckersville, WILL
Maybe you are looking for
-
Lenovo Ideapad U550 Webcam Driver
I got my webcam under Windows 8 with former driver of Windows 7, and with the normal Skype for desktop PC, it worked fine. Now, all of a sudden, the driver disappeared and the webcam is not recognized. Does anyone know the manufacturer of this webcam
-
Impossible to change the wallpaper in Windows 7 Starter.
original title: Windows 7 Starter wallpaper! Seriously one you can't change the wallpaper on Windows 7 starter. Of course, that I understand that this version of Windows is expected to be very light on has to run smoothly on netbooks... but F---ing s
-
Error code 0 x 80070015 with Bluetooth connection
I get the error code 0 x 80070015 when I try to connect a Bluetooth mouse that was working fine until recently. I am running Windows 7.
-
Hello! I have an important question: tell me please where are drivers available for my model Hp Pavilion dv6837er for Windows 7? I await your response. Thank you!
-
Hi having some problems installing Windows 2012 R2 on ESXi 5.5 on a HP DL380 G6Installing windows stops looking for drivers at the beginning of installation - no one knows how to fix this?Thank you