'Guest user' entry by default dialog box
I am trying to create an entry 'Interrogate the user' custom, where the entry dialog box will always be displayed default value when the VI is called. I have a main VI, calling an updated updated him 'interrogate the user' VI. Below the code is changed by the series LV questioning the user. "Default_Serial" control is wired to the connector as input pane.
Then, the main VI looks like this.
But it does not work. Can anyone help?
Just use the wire of the error so that it comes out the reset node and goes into the node value when you set the value. It would be much more simple and you wouldn't need a sequence structure.
Tags: NI Software
Similar Questions
-
remove the entry from conformation dialog box when the desktop icon to open
delete come conformation dialog when the desktop icon to open. A number of dialog from one on the other. Cannot delete this until the shutdown the computer.
If you want to remove several things, hold down the CTRL key and click on what you want to delete, and then right-click on one of them and click on delete. You will get a confirmation dialog box.
Good luck.
-
catch the dialog box "open field"?
Hello world
I have an EditField with a limited number of characters in the line. If the user types an equal number, or more characters, "full field" default dialog box appears. Is it possible to change the text in this dialog box?
lol but you might use a field without maxchars and implement a control of the length of yourself.
-
[CC/CC2014/Mac] How to prevent the dialog box to hide
Hi all
I have a Connect dialog box to my plugin. When the connection is asuccess, I show an error alert box to the user. After that, when the user closes the alert dialog box, the dialog connection must still be in its place and user can try to log in again. It works absolutely fine until the CS6. But in CC2014 strange thing happens.
When the user closes the error alert box, my connection dialog box just disappears! In fact, it becomes invisible since the closure, all options of InDesign becomes invalid as if a dialog box opens and I have to close the application with the activity monitor. I don't know why this phenomenon occurs? (I did nothing special to my Controller dialog box)
The following simple code has worked before-
void MyLoginDialogObserver::Update(const ClassID& theChange, ISubject* theSubject, const PMIID& protocol, void* changedBy) { if (theChange == kTrueStateMessage) { InterfacePtr<IControlView> controlView(theSubject, UseDefaultIID()); ASSERT(controlView); if (controlView) { WidgetID widgetID = controlView->GetWidgetID(); switch (widgetID.Get()) { case kOKButtonWidgetID: { if (Login()) { // login is successful CDialogObserver::Update(theChange, theSubject, protocol, changedBy); }else{ // login failed! CAlert::InformationAlert("Login Failed!"); //THE DIALOG SHOULD REMAIN OPEN after the alert box is closed, but it just vanishes! } break; } default : { CDialogObserver::Update(theChange, theSubject, protocol, changedBy); break; } } } } }
Any help will be very appreciated!
Move this login()) for your DialogController::ValidateDialog ().
BTW, your comment should invoke the Update() inherited in all cases unless it consumes a specific notification, such as a widget in private.
And for the removal of the OK button you really should know what you're doing.
Dirk
-
Create a Listbox control in the dialog box
I want to create a simple list box in a dialog box and fill it with some dynamic ropes. I placed a Treeview in the dialog box by using this code in the file en:
TreeViewWidget
(
myListID, / / fWidgetId
kSysStaticTextPMRsrcId, / / fRsrcId, fRsrcPlugin
kBindNone,
Frame (10, 10, 280, 200),
kTrue, / / fVisible
kTrue, / / fEnabled
kTrue, / / fEraseBeforeDraw
kInterfacePaletteFill, / / InterfaceColor wipe
"", / / control label
kFalse, / / display root node
kFalse, / / use scroll bar:
kTrue, / / use scroll bar V
20, / / button vertical scrolling increment
20, / / inch vertical scrolling increment
0, / / scroll button horizontal increment
0, / / inch horizontal scrolling increment
1, / / selectable items, 0 = no selection, 1 = single selection, 2 = Multiple selection
kTrue, / / of many parents to choose a toy
kTrue, / / allow the discontinuous selection
{
}
)
In my box, I see the list box with entries 0-9. How can I remove these entries and add my own strings? In PanelTreeView and other samples, I can not find a solution.
In DialogController::InitializeDialogFields I tried to init the list like this without effect:
TreeView IControlView * = pPanelData-> FindWidget (myListID);
ITreeMgr InterfacePtr < ITreeViewMgr > (treeView, UseDefaultIID();
iTreeMgr-> ClearTree (kTrue);
TreeView in cs6 is the only possibility for the creation of a ListBox with selectable inputs a Dropdownlist control is no option because the user should see several entries after the dialog box.
Node NodeID = treeviewHierarchyAdapter-> GetNthChild(rootNode,0)
treeviewController-> Select (node, kTrue, kTrue);
-
Fontstyle warning message dialog box problem
Hi all
I have something interesting to get the solution on your part.
When settings changed, automatically third peripheral font style (any) application (s) font for the message (message) Dialog.alert style also get change. Intentionally, I want that my style of application policy should remain same regardless of changes in the settings of the device. To do this, I used Family.forName ("bbalpha sΘrif"), to stay the same text in my application. But I can't seem to use the same for alert default dialog box messages.
Can someone give me an idea please.
Hello
As pradeep said, in your situation, you must use dialogClosedListener().
Means that you can write your code by pushing to the next screen
For example like this:
Dialogue _dialog = new (message, choices, values, defaultChoice, bitmap) dialog box;
_dialog. SetFont (policy);
_dialog.setDialogClosedListener (new DialogClosedListener()
{
' Public Sub dialogClosed (dialog, int choice dialog box)
{
If (choice is Dialog.D_OK)
{UiApplication.getUiApplication () .push (new NextScreen());
}
}
}
_dialog. Show();
Kind regards
Lakshman K
-
Changing color of the white dialog box inside in Windows 8
How can I change the interior color by default dialog boxes in Windows 8? No need to change the brightness or re - calibrate the screen. I do not want to change the color of the borders comes from Windows. Already the versions (XP etc) I was able to change the default tabs white for a shade of pink that have helped me manage my dyslexia. I want to do it on my new laptop and have been unable to negotiate through the options panel to locate the correct function to do this. Can someone advise?
Kind regardsSimon ConingsbyIf you want to change the color of your borders of window or the taskbar, do a right-click on the desktop, go to customize. Choose a custom color and then choose your color, use the color mixer to get the tint and brightness you want.
-
I have a parent page that triggers a modal dialog box in APEX 5.0. When the user confirms in the dialog box, it closes the dialog box by using the process of dialogue.
In the parent page, if I do not have a dynamic action "Dialog box closed", the user returned to page with the values, they recently came again here. If I add a closed action dialog box to send the page, the values are lost - it's as if the page refreshes before submitting. Someone knows how to solve this problem.
Thank you.
user3282753 wrote:
Please update your forum profile with a recognizable username instead of "user3282753": Video tutorial how to change username available
Also, is it possible to display the success message from the Page of the dialog box without updating the parent page.
See Roels Blog: display a success message after you close a modal dialog box
-
UAC dialog box does not accept entries in user or administrator of basic mode
On a Windows 7 Professional machine, whenever the dialog asking me if I want to allow changes, the dialog box will not accept any input at all. Count it freezes unless I have call the Task Manager and terminate the running program that awaits a response that I can't give him.
Hello
1. Since when are you facing the issue?
2 are logged as administrator?
3 did you a recent software or changes to the material on the computer?
Method 1:
I suggest that you try to perform the file system Checker analysis on the computer. The scan will replace all the Windows files corrupted with new ones.
Click on the link mentioned below for further guidance on the scanning of the file system Checker
http://support.Microsoft.com/kb/929833
Method 2:
I also suggest you create a new user account and check.
Create a user account
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
See also:
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
Hope this helps and keep us posted.
-
Default startup location dialog box?
LV2010 running. I want to invite a user to save a file by opening a dialog box. In this way the user can select the file and the location of the file. Problem is, I want to open the dialog box from a default folder that I choose. LV help for functions of files say that if I wire a path to the file (use dialog) entry and the file does not exist, it will throw an error. Is there a way to open a dialog box that starts in a default folder? Thank you.
File Dialog.vi has an entry "starts along the way. A dialog box is displayed from this path.
-
Dialog box retains the entries
Hello world
I created a box of script and dialogue for the people in my office to use. I intend for people to take what I've created and save it to their computer this way with the master copy never gets dirty. In this dialog box, the user must enter a number of variables and test settings that I saved as variables such as T1, L1, R1,... etc. Is it possible that when you close diadem and reopen the data of a former test that you can fill out the dialog box with entries that have previously been entered. Now everthing resets to 0 if you completely close Diadem. Because the way in which there are a number of fields, you must enter it would be pretty annoying to have to fill it every time. I am currently using Diadem 2015. Unforunately I don't think that I can provide this code and dialog box to you guys so I hope it's clear enough.
Thanks for any help
So I found a solution to my problem. The way I solved the problem and was able to keep the values in the dialog box was using a global dimension and create a channel to store these values.
If groupindexget ("VariablesV2") = 2 then ' occurs when there is a variable channel
GlobalDim1 = CHDX (1,2)
Call SUDDlgShow ("Dlg1", MyFolders (0) & "NoName.SUD", NULL)
ChD (1, "VariablesV2/TestVarChanName") = GlobalDim1else ' happens when there is NO variable channel
Group = "VariablesV2."
Call GetCreateGroup (Group)
TestVar1 = GetChannel ("TestVarChanName", 1, "Digital", group)
Call SUDDlgShow ("Dlg1", MyFolders (0) & "NoName.SUD", NULL)
ChD (1, "VariablesV2/TestVarChanName") = GlobalDim1
End ifBasically, what it does is check if the variable group is present as the second group. If it isn't then it creates the group, then channels, I need. I then called the dialog box where I can enter the values in the text box who assined to the variables 'GlobalDim1' which he. I then store this value in the channel that I just created. When I reload the tiara, the script will see this channel, open the dialog and display this value and I can then choose to change this value or would it be let. I won't say it's the best way to do it, but until now it works. I'll see how it behaves when I have a long list of variables/channels.
-
Hello
How to create a dialog box to enter password, which is a dialog box that replaces the password with points?
Thank you
"> http://www.ni.com/widgets/pnx/1.0/js/up-data.js" >
Stephen1. place the Express VI "Prompt the user for input" on a comic book
2. set up the inputs you want, IE. text of two entries button "User" and "Password" and an OK and cancel.
3. click OK to complete the configuration
4 right click the Express VI and select 'display the front panel '. Confirm that you want to convert a Subvi
5. right click on the string of password control and set the "password."
6. (optional) with the right button of the Express VI on the diagram and choose "display as icon".
Now you have a Subvi, which will serve as a password dialog box.
-
How can I clear the drop-down list in the user credentials dialog box in windows XP?
I deleted a .net passport account by using the network password manage
I have cleare IE cache and everything related to passwords
But when I opened a credential information, such the connection to Outlook dialog box, in the drop-down list I see still some old user names, none of them is not in the list of Auditors .net.
How can I delete all the entries in the drop-down list?Hi PiterAsquini,
You can review the article and check if that helps:
-
Dialog boxes that are not active until the user clicks
When I click on anything that opens a dialog box in Windows 7 Home Premium (version 6.1), I then have to click the dialog box to make it active. An example is an Excel file protected by password... when I opened the file, the password used to be active for me box so I can just type the password and press ENTER... now I have to first click on the box.It started a while ago and more of a nuisance than anything else... I hoped that it could be corrected in an update of Windows, but so far nothing has changed, which leads me to think that I need to change something about myself. I have reset my keyboard and mouse settings by default, but that made no difference, so I'm open to suggestions!Thank youKim.Hi Kim,
Follow the troubleshooting methods listed below.
Method 1: Run a SFC scan.
Sfc/scannow will inspect all the important Windows files on your computer, including the Windows DLL files. If the System File Checker detects a problem with any of these protected files, it will replace it.
Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
http://support.Microsoft.com/kb/929833
Method 2:
Follow the steps below.
(a) open registry, click Start, type regedit and press ENTER.
(b) locate the key:
HKEY_CURRENT_USER\Control Panel\Desktop
(c) on the right pane right-click on the following key and choose Edit:
(d) ForegroundLockTimeout
(e) select decimal Base and enter 0 (zero) in the value data box, and then click Ok.
(f) out of the registry and restart the computer.
Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
You can also see the question in a new user account. If you have a new user account, and then connect to that, or else you can create a new user account, and then check. Follow the steps below.
Create a user account
http://Windows.Microsoft.com/en-in/Windows/create-user-account#create-user-account=Windows-7
Write to us at the State of the question. We will help you to come.
-
Username, preserved in the AnyConnect Client user name dialog box
I have one question remains on my client anyconnect 2.5.2006. The user in the dialog box name is cached. We do not want to be cached and have users to enter their username every time.
Shilpa Gupta mentioned on another post of mine. I was wondering if anyone has any other thoughts! The 2.5.2006 resolved customer I had another question, so come back to 2.4 is not an option at this point.
For clearing up the credentials in the dialog box when using AnyConnect I found one of the bug:-
Symptom:
User credentials are cached in the preferences.xml file when you use the Anyconnect client. So when they revive Anyconnect, the user name is displayed in the client.
Conditions:
You can see all the client anyconnect. It is a configurable option in the IPSec client.
Workaround solution:
Currently there is no work around
And I can see it resolved in 2.4.202 however, I'm not sure if its fixed in 2.5 also. For this I would like to hear from others.
Kind regards
Shilpa
Hello
All bug fixes and new features in 2.4.x are also in 2.5.
However the "bug" Shilpa has pointed out, is not really a bug, but an enhancement request, in other words in 2.3 before the cached username is expected behavior and is always the default behavior in the 'fixed' versions, so just the upgrade won't change anything. What has changed is that now you can change the behavior by defining a new parameter RestrictPreferenceCaching in the local policy file:
So for example the addition
All
your local police should achieve what you want.
HTH
Herbert
Maybe you are looking for
-
2.2 Business Contacts app is now gone
So far, the 2.2 update was good for me (with the exception of the question of the WiFi). Here's another mystery, maybe someone can help find. 2.1 on my sync exchange has worked with no problems. There was a corporate directory application I used regu
-
I AM-A58K camera I can send photo by bluetooth
-
Windows update and MS security essentials stopped to receive updates. The error code that update is 80070426, but there's no article on it in the knowledge base. I tried to reset windows update history, using the Microsoft Fix - it application and en
-
inactive: error loading winbch32.rom
every time when I start my laptop I get this error loading winbch32.rom after starting, I tried to find in the center of solutions for Microsoft vista but chess pleaes help me out of this problem, I hope you guys will help me thanks in advance have a
-
ISA 550W: Youtube streaming stops after a few seconds
Since I installed the ISA 550W, Youtube videos stop after a few seconds. It happens on all my devices: Windows 8, Samsung Smart TV, Android, Windows Phone... I have the lates firmware. This problem doesn't happen with the other streaming like DailyMo