Password IOM (11.1.1.5) for synchronization to an external system

Similar Questions

• "an attempt was made to use an object that is not or is no longer usable". " What does that mean? Occurs in the creation of a 'new' FF account for synchronization purposes.

  Attempts to set up synchronization. Several attempts last year, also failed many times because of password "like," "problems." I dropped. Now, my attempt to set up sync with my support mozilla (e-mail address and password) account was rejected by the words quoted above. The attempt to create a new account for synchronization only and with another e-mail address was also rejected by the words quoted above. The two addresses are valid and for a long time with the different email providers. Synchronization must be between laptops. What is the solution to this riddle? Thanks in advance for your time and help!

  In fact, so watch as an add-on can be affected. Can you please temporarily disable all your modules and try the sync again?

• Can I synchronize my favorites from a device where I used Firefox before I sign up for synchronization?

  I use Firefox for years on my main laptop, but never heard of synchronization. I recently bought a new, more small laptop for school and found Sync while the implementation and installation of Firefox. I registered for synchronization, and bookmarks, I created on my new laptop appear in the bookmarks menu in my main laptop, but not vice versa. Is it possible to transfer these old bookmarks and folders from my old laptop to my new? Thanks for the help!

  has been published twice.
  under the direction

• Why should I provide my age for synchronization?

  Why should I provide my age for synchronization?
  How to?
  Where my privacy? How to?

  Hello slavius, for legal reasons, mozilla has to verify that you are over 13 years of age when you sign up for the service. It is not used or stored for any other purpose.
  http://en.Wikipedia.org/wiki/children%27s_Online_Privacy_Protection_Act

• iPad 2: addition of 'peripheral' for synchronization

  I can add a non-Apple device, for example, your desktop PC Windows 10 w / the latest version of iTunes, to my list of "peripheral" on my account page Apple to facilitate synchronization of music?

  iTunes syncs your music from a Windows PC as easily from a Mac. There is no need to add it anywhere.

  Connect your device to the computer running iTunes creates the connection for synchronization of music.

• Hardware options for synchronization

  Wondering if someone could help to "classify" these approaches for synchronization.

  -TCXO with shared references/PPS (i.e. - cable MIMO or OctoClock)

  -OCXO

  -OCXO with GPS

  The 'standard' TCXO models require extra things (MIMO or OctoClock or external sources) to phase-locking and synchronize the time.

  The OCXO allows precise... but we don't know how this has an effect on phase coherence (and how long a time).  Presumably, you would still need something like a PPS both synchronize?

  With disciplined GPS devices, are you basically get consistency and synchronization time of phase since the GPS rather than external signal 'stuff '?  Or are there cases where you still need something like cable MIMO or OctoClock for more nail timing and synchronization?

  ---

  Brandon

  Hi Brandon,.

  Thank you very much for the information! I leaned more in detail in this issue, and much of your question depends on your hardware configuration and system. JamesB, awesome post! This is great information.  Add to that, for our GPS USRPS (NI USRP 293 x) Unfortunately, you can not use the Ref entries in, this split on the external clock won't be an option on this material. In this context, option (c) will be probably the easiest because it is exactly how the work of our USRP. Do you use a USRP NOR? If Yes, and you try to sync up to 8 of these USRP together, GPS could be the only real option.

  The extent of the direct wire vs precision GPS, direct wire is more accurate if you are using an external clock, which is more accurate than the clock on board and if you use a USRP which can use an external reference clock

  The NI USRP 2930 and 2932 both of OCXO who only are more accurate, but there is no way to retrieve the source of 10 MHz to another device, with the exception of a MIMO cable which is not good to use for 2 devices. This is why the direct wiring method exists only for specific scenarios:

  1. the use of MIMO cable for up to 2 devices

  2. using an external clock, and a separator.

  However, the internal OXCO does not you nothing good for the device plus two synchronization. With the help of a GPS antenna, clock discipline and a clear view of the sky will let each USRP use it of own OXCO and still be synchronized. It's not just GPS, it is using GPS information to adjust the already great time reference OCXO, which required each device to set its own clock. The following document shows the specifications for a USRP without a GPS antenna (just the precision OXCO) vs the OCXO accuracy in conjunction with the GPS disciplined in the section 4 (synchronization with GPS Disciplined oscillators on NI USRP 293 x):

  http://www.NI.com/Tutorial/14705/en/

  While I was looking for it, I also found this post on the forum who has had a similar question:

  http://forums.NI.com/T5/USRP-software-radio/synchronization-of-three-USRP-2932/m-p/2835772

  I hope this has been helpful!

• Can not find an example for synchronization series S-6120 devices...

  Hello

  I recently updated my system to MSstudio and NiDAQmx 8.8 8.6. I have two cards PCI 6120 on my computer. I'm looking for a sample VB .NET program for synchronization of the two cards. But I can't find examples for S material of the series. The examples that I found are written for class E or M and they were written with the libraries of 8.5 Ms. As a result, they does not work in the first instance. However, I've referenced to 8.6 libraries but the custom still programme with my devices. Can anybody e help to kick start my Vb .NET program.

  Thank you in advance.

  Concerning

  Vijay

  Hi Vijay,

  For VB.NET examples for synchronization of multiple devices, you can take a look at some of our examples expedition under C:\Documents and Settings\All Users\Documents\National Instruments\NI-DAQ\Examples\DotNET2.0\Synchronization\Multi-Device. In particular, I want to tell you that is the AIContAcquisition examples. This example shows you how to synchronize multiple devices such as E-Series, series M and DSA for a task HAVE continued. Note that while the S series is not explicitly mentioned in this example, the synchronization procedure E-Series is identical to that of the S series. In addition, because this example uses not all components MStudio, you experience no longer MStudio library problems.

  I hope this helps.

• I did not use my PC for a while and have forgotten my user name and password. It is now necessary for me to install software on this PC, but need to log-in to do this

  Original title: Log-in question

  I did not use my PC for a while and have forgotten my user name and password.  It is now necessary for me to install software on this PC, but need to log-in to do this.  How can I better log-int?

  The software is now located on my desktop but cannot be put to use; apparently because it is not installed in a suitable place in my computer.  Using the Guest login does not work since the installation of this software is not allowed in the comments section.  Your ideas will be appreciated.

  Hello

  What account are you connected to? Administrator or guest account?

  See the following article: Microsoft's strategy concerning lost or forgotten passwords

• HP PRESARIO V3000: CMOS PASSWORD FOR HP PRESARIO V3000 disabled system (10945)

  PASSWORD CMOS FOR HP PRESARIO V3000 disabled system (10945). Everytime I open my laptop it calls a cmos password and after several attempts at system was turn off the fact that the code of 10945. What should ba the password for this?

  Thank you

  EDSAR

  @EDSAR

  Enter: eztoyav

  or

  stouzim

  Kind regards

  DP - K

• Password Windows Mail recently started asking for a user name and password.

  Original title:

  Windows Mail password

  My email has recently begun to request a username and password.  The same email worked for several years.   I don't know what to enter.  The names and passwords I have do not work.

  Hello

  Try to remove and then add the account in Windows Mail.

• Police pretended to be available for synchronization, but is not

  I tried to synchronize the Adelle police so I can use it from InDesign: search results for adelle | Typekit

  Adelle regular turns green when I go over it, and he says "+ uses the fonts. When I click on it, I get a list of variants, but subject checkboxes are disabled, so I can't get an any of them.

  Anyone know of a workaround?

  I'm sorry that you trouble with that. Adelle is available for synchronization with a plan of portfolio Typekit or higher membership level. If the check boxes are grayed out, this means that you are on the free map of Typekit, and must update to sync Adelle.

  When you try to synchronize Adelle of Typekit, you see a message next to the box that says "Sync (with upgrade to portfolio)", as in this screenshot?

  

  If so, there are two options:

  A. upgrade to Typekit portfolio

  Visit typekit.com/plans and select the option 'upgrade' under portfolio. You will be asked to enter your billing information and confirm the update of the plan.

  Once you have upgraded, you will be able to synchronize Adelle:

  https://helpx.Adobe.com/Typekit/using/Sync-fonts-desktop.html

  B. choose a different family that is included with free Typekit

  Roboto slab is the closest match to Adelle which is also available to synchronize on your lesson plan:

  https://Typekit.com/fonts/Roboto-slab

  I hope this helps; Let me know if you have any other questions. Best,

  -liz

• Within the Office of LR CC, I am unable to sign for synchronization. No dialog box is presented.

  Within the Office of LR CC, I am unable to sign for synchronization. No dialog box is presented.

  I can connect my iPhone and the iPad, but not of my desktop iMac computer. I made sure I joined the mobile tab preferences/Lightroom, but no information Adobe ID is displayed.

  I have synced with success in the past.

  Thank you

  George

  Hi gellstone,

  The option to change the identity plate will come if you click the custom option.

  

  You will get the option to start the synchronization of Lightroom by clicking the dropdown under Adobe Lightroom CC 2015.

  

  Concerning

  Sarika

• Why is-Lightroom sync many more pictures that I have designated for synchronization?

  Strange behavior.

  I have a few collections that are designated to sync with my other devices via Mobile with Lightroom. HOWEVER, in the upper left corner of my window, I thought that something like 3770 pictures be synced - the way, much more that I have selected for synchronization. When I left, I get the "you are always sync 3770 pictures ' warning.

  The number changes; It breaks down and back up again.

  Is there something that I am missing?

  As a best practice, we do not suggest keep the catalog on any network drive.

  And you can merge the old catalog to the new in Lightroom.

• Other folders for synchronization

  Can I use one folder other than Creative Cloud Files for synchronization?  I would use an existing folder.  Can I rename it to Creative Cloud Files?

  Will be that TurnUp wrote:

  I don't want to use the creative Cloud Files folder at all.  I have a folder hierarchy that I have used for several years.  They are on an external hard drive.  I don't want to move each of them for Creative Cloud Files, which has been on my internal C drive.  What should I do if I want the file sync is on an external drive, and I don't want 25 000 files?  No there is no way to specify I want Cloud creative to use one drive other than Creative Cloud Files for synchronization?

  If you want to just change the location of the creative Cloud files?

  

  

  You should be able to use a drive letter and not a folder if that's what you prefer.

• name of user and password invalid... Oracle for VC connection (VirtualCenter does not start)

  Hello:

  I had to change my password for my Oracle DB and now I can't start Vritual Center.  The newspaper said:

  ODBC error: (28000) - [ODBC] [Ora] ORA-01017: name of user and password invalid. connection refused

  Can you get it someone please let me know where I should change its name to username/password?  I use the ODBC for Oracle driver and if I click "test connection" and put manually correct (new) password login will be successful... However, I don't know where I should put for VC service...

  Thank you

  Olegarr

  I found this KB, http://kb.vmware.com/kb/1003928 , it might be useful?