Sierra Fax Modem not recognized

I have a USRobotics USB 5637 model who disappeared from my selection of printers after installing Sierra.

Advertisement

Apple dropped support for fax modems in the Sierra.

I hope this helps.

Tags: Mac OS & System Software

Similar Questions

  • XPS 8700 Fax / Data modem not recognized after mode 'sleep'

    I have an internal modem installed pci-e.  After the system goes into sleep mode, the modem is not recognized.  Resolution is to draw the pci-e card, restart the system, then stop again, re - install the Fax/data modem and it is recognized, until the system goes into sleep or stop mode.

    How can I keep the device recognition, didn't have to pull on the map and re-insert/install whenever I start?

    When I look at the Device Manager after the mode standby or shutdown, the device will display hidden and not connected to the system.

    System BIOS is updated to the current 10 A

    Always include the version of Windows in your messages.

    You may need to change sleep settings and possibly disable hybrid sleep by using the Windows power options, and/or adjust the power options in the BIOS Setup.

  • Re: Portégé R700 - broadband modem not recognized anymore

    Hello

    I have a problem with my Portege R700.
    In recent weeks the modem internal broadband is most recognized.
    I tried several settings and also install the original Image. But the modem is still not available.

    Do you have ideas of how to do to correct this.
    Maybe after that last updated BIOS (2.20) the modem is hidden...

    Does anyone has the same problem?

    Best regards
    Chris

    > I tried several settings and also install the original Image.
    Which is really strange, especially after the installation of recovery image.

    Have you checked the Device Manager? Some unknown device listed here? I can't believe that this modem can go for no reason.

  • Satellite A300-14 - after Windows 7 installation no modem not recognized

    Hey guys, how are you?

    Unfortunately, I discovered today that the Modem is installed with the drivers on Windows Vista 32-bit, but does not work. However, I formatted my PC and installed Windows 7 Ultimate 64 bit and: no modems at all! I don't know why Device Manager is unable to see and my capture device.

    I need help guys.

    Thank you.

    My laptop is: Toshiba Satellite A300-14

    Hi dr.anm,

    Have you tried to reinstall the modem driver? I checked the Web from Toshiba site and I can find a driver of modem for Windows 7:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Check this box!

  • Windows Fax and Scan will not add an account to my internal Fax Modem

    I tried all the work around listed Forums and Windows Fax and Scan will not add an account to my internal fax modem. The Modem is recognized by Windows 7 and test very well. I am running Windows 7 Professional 64 bit.

    Hello michgaud,

    To set up a fax server

    1. Before you begin, make sure that your computer is connected to the network and you know the network address of the fax server (for example, \\mycompanyfaxserver).

    2. Click the button start , click programs, and then click Windows Fax and Scan.

    3. To use the fax mode, click fax at the bottom of the left pane.

    4. Click the Tools menu and then click Fax accounts.

    5. Click Add, and then, in the Fax Configuration Wizard, click on connect to a fax on my network server and follow the instructions.

    Check the following settings:
    In Windows Fax & scan settings, open tools/Fax and under the general tab.
    Look at the 'Fax select device".
    Your modem is listed here?
    You have the, "allowed to send and/or receive" selected?

    This setting should be checked and selected until all accounts are created.

    You can watch the post following TechNet with a suggestion that might help with your problem.
    http://social.technet.Microsoft.com/forums/en-us/winserverprint/thread/18a5dba1-1bc5-49EB-923A-b81958e80727

    I hope this helps.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Why Apple Drop Fax Modem Support with Sierra?

    Why Apple Drop Fax Modem Support with Sierra? Now, I have to spend money on a fax or e - Fax machine. Yechh.

    It has fax modem support since Apple stopped including a port modem/phone on computers. You can always try using a USB modem for faxing.

  • HP Pavilion 17: Fax Modem internal not detected

    Spent too much time on this problem.  Win Fax & Scan does not detect the fax. Control Panel says Microsoft fax in the queue of root "works properly."  So changed original FXST30.dll, apparently to fix this 8.1 do not recognize the external modem. This does not solve the problem of detection. So the question is now: HP Pavilion 17 still has a built-in fax modem? And if so, why not Win Fax & scanning not detect.

    Any suggestion would be appreciated!

    Hello

    N ° normal laptops now have fax & modem. You can find fax & modem on machines older or on machines of the company. Moreover, what is your Pavilion 17? Please follow the instructions below to find the product/model of your machine:

      http://support.HP.com/us-en/document/c00033108

    Kind regards.

  • Wake up to the problem of the ring - Fax modem does not have wake up reliable PC from sleep mode - how to 100% reliable?

    When my WinXPPro SP3 machine is in sleep/standby/suspend mode (S1 or S3), the fax modem wakes the machine some of the time, but not all the time.  I want to wake up the PC everytime, with 100% reliability.  (When the PC is on, the modem and the machine to receive faxes beautifully.)

    What do you suggest me?

    Modem: Conexant D850 PCI V.92 Modem with the recent update of driver to version 7.67.0.50 (2007-07-03) (but this problem is the same today as before with the 2004 driver version)
    PC: Dell Optiplex 755
    Processor: Intel Core 2 Duo E4600 @ 2400 MHz
    RAM: 2 GB, of which 1.4 GB is usually free
    BIOS: A14
    OS: WinXPPro SP3 with all updates
    AV: Avast free Home
    Anti-spyware: free SpywareBlaster, Spybot S & D free and AdAware anniversary free
    Fax software: Console MS Fax that comes with WinXPPro SP3
    Printer/Fax printer: HP OfficeJet Pro 8500 Wireless AIO (A909g model)
    Screen saver: Logo "XP" after 9 minutes. do NOT show the Welcome screen on resume
    Power settings: Home/Office Desk. Turn off screen after 10 minutes; Turn off hard disks never; System to sleep after 20 minutes; Hibernation ever; Do NOT ask for password when the computer wakes mode standby
    Home Ethernet network connection: card Intel (r) 2-82566DM Gigabit Network Connection with all function Wake on LAN settings WE.
    Browser: Firefox latest but they use IE occasionally when necessary
    E-mail: MS Outlook Express 6 for mail POP3/SMTP service
    Miscellaneous: I also run LogMeInFree version 4 on all my home computers

    Thank you.

    I'm sorry, but I do not know how Wake on Ring more reliable.   I doubt the reliability of 100% is possible.

    I suggest you obtain a separate fax machine.

  • My wireless router does not appear when I shoot to the top of my devices. It shows my fax, modem, scanner and a few others. But not my belkin wireless.

    My wireless router does not appear when I shoot to the top of my devices. It shows my fax, modem, scanner and a few others. But not my belkin wireless. And when I try to add it, the system can't find it. Please help

    Belkin support for your model, for installation instructions.

    Your router will not appear in the devices

  • G70 213EM Windows 7 Fax does not connect to the modem

    "Hi, my G70 213EM let me use Windows 7 Fax, when I try to send a fax, it tries to detect the modem (HDAUDIO Soft Data Fax Modem with SmartCP) and reportsan error occurred - try the operation later or contact your system administrator '. He has worked with the release candidate, but not now with Windows 7 Home Premium full version.

    I questioned the modem via Device Manager and obviously only the fault I can see is a line in the newspaper that says ' DSR is low during the initialization of the modem. Verify the modem is turned on ' , but it responds after that? very strange.

    12-01-2009 09:34:12.373 - File: C:\Windows\system32\tapisrv.dll, Version 6.1.7600
    12-01-2009 09:34:12.389 - File: C:\Windows\system32\unimdm.tsp, Version 6.1.7600
    12-01-2009 09:34:12.389 - File: C:\Windows\system32\unimdmat.dll, Version 6.1.7600
    12-01-2009 09:34:12.389 - File: C:\Windows\system32\uniplat.dll, Version 6.1.7600
    12-01-2009 09:34:12.404 - File: C:\Windows\system32\drivers\modem.sys, Version 6.1.7600
    12-01-2009 09:34:12.404 - File: C:\Windows\system32\modemui.dll, Version 6.1.7600
    12-01-2009 09:34:12.404 - File: C:\Windows\system32\mdminst.dll, Version 6.1.7600
    12-01-2009 09:34:12.404 - Modem type: HDAUDIO Soft Data Fax Modem with SmartCP
    12-01-2009 09:34:12.404 - Modem inf path: oem3.inf
    12-01-2009 09:34:12.404 - Modem inf section: ModemX
    12-01-2009 09:34:12.404 - Matching hardware ID: hdaudio\func_02&ven_14f1&dev_5051&subsys_103c360b
    12-01-2009 09:34:12.600 - 115200,8,N,1, ctsfl=1, rtsctl=2
    12-01-2009 09:34:12.600 - Initializing modem.
    12-01-2009 09:34:12.600 - DSR is low while initializing the modem. Verify modem is turned on.
    12-01-2009 09:34:12.610 - Send: AT
    12-01-2009 09:34:12.611 - Recv: OK
    12-01-2009 09:34:12.611 - Interpreted response: OK
    12-01-2009 09:34:12.621 - Send: AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1;W2
    12-01-2009 09:34:12.623 - Recv: OK
    12-01-2009 09:34:12.623 - Interpreted response: OK
    12-01-2009 09:34:12.633 - Send: ATS7=60S30=0L2M1+ES=3,0,2;+DS=3;+DS44=3;+IFC=2,2;X4
    12-01-2009 09:34:12.634 - Recv: OK
    12-01-2009 09:34:12.634 - Interpreted response: OK
    12-01-2009 09:34:12.635 - Session Statistics:
    12-01-2009 09:34:12.635 -                Reads : 18 bytes
    12-01-2009 09:34:12.635 -                Writes: 94 bytes
    ATQ0V1E0 - OK
    AT+GMM - +GMM: HDAUDIO Soft Data Fax Modem with SmartCP
    AT+FCLASS=? - 0,1
    AT#CLS=? - COMMAND NOT SUPPORTED
    AT+GCI? - +GCI: B4
    AT+GCI=? - +GCI: (00,01,02,03,04,05,06,07,09,0A,0B,0C,0D,0E,0F,10,11,12,13,14,15,16,19,1A,1B,1C,1D,1E,1F,20,21,22,23,24,25,26,27,28,29,2A,2B,2C,2D,2E,2F,30,31,32,33,34,35,36,37,38,39,3A,3B,3C,3D,3E,40,41,42,43,44,45,46,47,48,49,4B,4C,4D,4E,4F,50,51,52,53,54,55,56,57,58,59,5A,5B,5C,5E,5F,60,61,62,63,64,65,66,67,68,69,6A,6B,6C,6D,6E,6F,70,71,72,73,74,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,81,82,83,84,85,86,87,88,89,8A,8B,8C,8D,8E,8F,90,92,93,94,96,97,98,99,9A,9B,9C,9D,9E,9F,A0,A1,A2,A3,A4,A5,A6,A7,A8,A9,AA,AB,AC,AD,AE,AF,B0,B1,B2,B3,B4,B5,B6,B7,B8,B9,BA,BB,BC,BD,BE,BF,C1,C2,C3,C4,C5,C7,C8,C9,CA,CB,CC,CD,CE,CF,D0,D1,D2,D3,D4,D5,D6,D7,D8,D9,DA,DB,DC,DD,DE,DF,E0,E1,E2,E3,E4,E5,E6,E7,E8,EA,EB,EC,ED,EE,EF,F0,F1,F2,F3,F4,F5,F7,F8,F9,FA,FB,FC,FE)
    ATI1 - 255
    ATI2 - OK
    ATI3 - SoftK56V_B2.1_V7.80.4.50
    ATI4 - HDAUDIO Soft Data Fax Modem with SmartCP
    ATI5 - 180
    ATI6 - SoftK56
           CModem Version 12
           Rksample Version 342
    ATI7 - 255
    

    I hope someone can help?

    Re-installation of Windows 7 Home Premium 64-bit and let it update seem to have solved this problem, don't know why?

    Thanks for your help anyway.

  • Error modem usb device trying to stall usb fax modem fax modem usb sytem. system could not find driver any idea on how to down load the driver I

    Usb modem error device tries to install usb fax modem usb fax modem cannot find system the pilot any idea on how to load the driver?

    Hello

    What brand / model of the fax machine?  What is a printer/Fax?

    Download the software complete features driver from the manufacturer's website.  It contains the fax driver.

    What version of Windows are you using?

  • Unposted fax modem

    I have a modem router Netgear broadband not recognized by Windows scanning and Fax. Why is this? I want to send/receive faxes occasionally.

    Bob Ryder

    Hello

    You cannot send and receive regular faxes thought there Internet.

    Fax it uses own protocol that needs a real modem and the connection to the classic telephone line.

    It is important to do it through the computer, you must install a Fax Modem on the computer and connect a regular telephone land line on it.

    Alternatively, you can get all-in-one (AIO) printer/copy/fax, which is compatible with Win 7 and network ready , then check with the computer via the network.

    The IOA will have a regular phone land line too.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Logitech C310 Webcam not recognized

    I have a Mac Mini from 2012 which I just upgraded to Sierra. Everything went well except the webcam, a Logitech C310, is not recognized by the operating system. He keeps his identification as "unknown device". It doesn't seem to work properly, but I fear that it is not properly recognized by the operating system.

    Anyone else have a similar problem with a Logitech webcam that faces a problem?

    Contact Logitech technical support. The camera may be incompatible.

  • When I try to print, a screen appears asking me to choose a server or fax modem. How can I get rid of this?

    2152 STD, 07/01/12

    Mozilla Firefox is my default browser. I can print if I use Internet Explorer, but not when I use Mozilla Firefox. All I get is this screen that says: "Choose a server or fax modem." There is no way to turn it off. Please help because I can not print now.

    Bill

    When you start printing in Firefox, is your printer selected in the printer > name?

    See the screenshot below.

  • Satellite L650 does support internal fax modem?

    have a new satellite l650. can someone tell me if it has an internal fax modem or do I have to buy an external one.
    I'm in a rural area so that nobody seems to know.

    Hello

    What you do L650-xxx gave exactly?
    For example; Satellite L650-108 was not equipped with modem.

Maybe you are looking for

  • Help!  I cannot attach a photo on SMS once 9.3 updated

    Help!  I can't attach a photo on SMS once 9.3 updated.  In addition, whenever I select a picture to attach it, it starts to download, I guess from iCloud.  iPhone 6 s

  • iPad Stuck in Recovery Mode Loop

    I just updated my iPad iOS 3 8 to iOS 9, but at half way through, he get into recovery mode. I tried to restore several times (DFU mode, re - download a new iPSW, reinstall iTunes, etc.). The iPad is still stuck in a loop of recovery with error 27 an

  • target setting / version information

    Hello When a new version of a software I update usually "version info" dialog box in the settings of the target. I just realized that these settings are different for the debug and release mode... Why is it so? We will distribute the release, not the

  • Reboot loop windows 7 updated

    My Windows 7 from Vista installation failed. After two-thirds of the site amenities treat the cumputer close andsaid that he would like to reinstall my old version of vista. My Dell XPS 1330 since this message is in a reboot loop.You have any ideas t

  • HP Pavilion dv4: unlock password (key: 70511507)

    Need help please, BIOS password... Enter unlock password (key: 70511507) HP Pavilion dv4dv4-1313dxs/n: CND914141GP/N: NM237UA #ABA Thank you very much