Password location problem

Similar Questions

• Password changer problem; I forgot the password computer

  I could not in my computer I have apparently you have forgotten the password.  However, I have now spent online from my husbands computer and changed three times and he agreed each time but my computer still won't let me.  ?

  I could not in my computer I have apparently you have forgotten the password.  However, I've now spent online from my husbands computer and changed three times and it has been accepted every time, but my computer still won't let me.  WTF?

  Hello

  This is how to fix the problems of passwords in Windows 7, which are the Forums that you send messages to.

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/189126/en-us

  Tools third password

  Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• I had a problem with my iPad 2 Air when I changed my Apple ID password, the problem is, it shows me a Massage says ENTER the PASSWORD, and then said your PASSWORD will be used when the signature with the new device, but when I but the code it shows fail m

  This problem happened to me and it belongs to iCloud and I have used so important, please can someone help me?

  Hello. The access code on your iPad is the code four or six numbers you will need to enter to unlock the device. It has nothing to do with the verification of your Apple ID or two-step. Are you able to unlock your phone? If you are, then please describe the steps that lead to your problem. Since you have changed your Apple ID password, you will need to go to two settings > iCloud and settings > iTunes and app store and sign out of your Apple ID, then connect back with the new PW.

• Password/username problem no adjustment being sent by e-mail after asking.

  I know that my password connect to Mozilla Firefox is correct. I get the wrong user name or password. I asked a reset password sent to my e-mail several times after several devices, but still nothing has been sent. How can I get my account?
  Thank you

  This email is always sent to the address of the web site.

  Name of user and password problems must be posted here with password in the title,
  https://support.Mozilla.org/en-us/forums/contributors

• E-print password reset problems

  I received the email to reset my passwotd.  the address bar looks as if she is looking but never is. It sits right on the page with the new password and not progress further.

  rather sad when I have to solve my problem. thanklyou forum for nothing.  It seems that the problem may b resolved by opening a session with my snapfish user name & password (email and password) so simple!

• iCloud password reset problem.

  Hello

  Bought iPhone 6 today and updated my previous iPhone 5 backup of the laptop, I got my pictures, contacts, etc., but the problem is the iPhone 5 iCloud id came automatically to restarting phone. the bad news is that the id belongs to the person who forgot the password id and living abroad, in this case, I bought it online and I was new to android to iPhone convert so didn't know not not the severity of the iCloud thing I knew that when I went to sell at the market.

  Please help how can I now delete this account or a profile without having the password.

  You can't do it. The password of this account is required. If you do not know ot or can't get the previous owner to cooperate, then there is nothing you can do.

• Password reset problem

  ORIGINAL TITLE: Problem with restore disc

  Win Home Premium 64-bit.

  The restore disc process seems to be asking me to insert my current restore disk, which obviouly I didn't so I need a new drive to restore in the first place.  Can someone help me by the window / this?

  Yes; you don't specify your question.

  It is called password reset; No restoration.

  And do you it before you lose or forget your password; not after the password is lost.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-password-reset-disk

  And Microsoft prohibited any assistance being given in these Forums to bypass or "crack" passwords lost or forgotten.

  See you soon.

• Vista password, login problems

  At the login window, I get my password to access my log in... for some reason, he stopped taking my password, saying: this was not accurate.  I don't have a password recovery disk and I'm suddenly blocked on my computer!  Help!

  At the login window, I get my password to access my log in... for some reason, he stopped taking my password, saying: this was not accurate.  I don't have a password recovery disk and I'm suddenly blocked on my computer!  Help!

  Here are 2 basically the same tutorials:
  You must have a Vista DVD or a repair disk to use these tutorials.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account
  http://support.Microsoft.com/kb/940765/en-us

  How to regain access to your administrator account using system restore

  http://www.howtogeek.com/HOWTO/Windows-Vista/how-to-regain-access-to-your-administrator-account-in-Windows-Vista-using-system-restore/

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Configuration password hibernation problems

  Original title: Hibernation Pasword

  I have a Compaq Persario laptop and I cannot set a password for when I put my laptop computer to the Hibernate. I wanted to know what steps must I take to solve this problem?

  Thank you

  Hi antwon wood,

  1. what issues are facing everything by creating a password?
  2 - is Windows not and will prompt you to enter the password after the wake up the computer after hibernation?

  We recommend that you provide us with more details on the issue, so that we can better help you. At the same time have a look at the following articles for more information about the hibernation.
  1. see How to activate put in hibernation on my Windows Vista-based computer?
  2. see How do I change the password requirement when my computer wakes from sleep?

  Visit our Microsoft answers feedback Forum and let us know what you think.

• *! NOT your Vista password usual problem - Incorrect password every time

  Dear Experts and gurus,

  I've been using Windows for many years, but I've never met a problem like this.

  I use a HP Pavilion dv6675us laptop and Windows Vista Ultimate x 64. I'm not an expert but I am reasonably competent.

  Here are the symptoms and workaround solutions I've tried without success.

  1. my user account has a password.  The password has NOT been changed.  Or JUST changed the password and I KNOW what it is. Suddenly, last night todayafter a disconnect and restart the computer today, I can't log in again. IGet the message incorrect regular password. Vista Ultimate showsthe even index of password. However, we should not have the 'good' password.

  2. the only way to connect is to go into safe MODE and enter using my password. So, the same password works in safe MODE, but it does not work in Normal Mode. Even change the password cannot log into Normal mode.

  The process does not work even if I empty the password via the SAFEMODE and try and connect via the Normal of Windows mode.

  3. in Safe Mode, I created a new account without password (empty), but that does not work either.

  3A. If I create a NEW USER account (under safe MODE, then try normal connection). If the NEW USER password EMPTY he still does not go past the Welcome screen to log on to windows. If the new user has a password, windows does NOT yet recognize the password.

  4. I tried to click on the blue Accessibility button on the home screen, then select the type without keyboard. Then, I used the on screen keyboard to type the password. It works no more.

  In short, the only way for me to access the computer is via safe MODE. I can't access Windows in Normal mode even if I set up the new USER with empty password, but I can access this new user even with a blank password in safe MODE, or if a password has been assigned, I can use a new password in safe MODE.

  Can someone help me access windows in normal please? I would appreciate any Expert or guru can define a solution that works and which corrects this problem.

  I have never encountered this problem before and would really appreciate some help.

  Thank you in advance.

  Finally a solution that works-

  I used the restoration of the system under "Safe Mode" and takes over the system to the point a few weeks before the problem started and after what age seemed the old point has restored the system and I can connect in normal mode.

  Make sure what you do all the backups of data necessary.  As far I can tell - I have not lost any data.

  I tried several solutions, for example by trying to reset the user account passwords using a tool of the editor - that didn't work, I tried to clean the registry under safe mode - no luck, I tried to run anti-malware under safe mode software programs - but most antimalware programs don't work for vista 64-bit 32-bit only.   The programs that I've been able to run find no virus or malware so do not know what to do with why it happened.

  But low line system restore worked.  I was very worried about the restoration of the system was the second last method I've tried - with a final by reloading the operating system - which fortunately I did not need to.

• Cat6500 Sup1A password recovery problem.

  Dear all,

  I have a nasty problem with password recovery in 6500 Sup1A - 2G.

  I have read very carefully the password recovery procedure,

  http://www.Cisco.com/en/us/products/hw/switches/ps708/products_password_recovery09186a00801349aa.shtml#ouput

  Reset power, with success, get in the console > (Enable), but then I tried to put the new password.

  I get following message:

  Enter the password:

  Console >

  Console > en

  Enter the password:

  Console > (enable)

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable) 24-Nov-2012 10:30:09 PDT--07:00 % SYS-5-1 MOD_OK:Module is online

  24 Nov 2012 10:30:09 PDT--07:00 % SYS-5-4 MOD_OK:Module is online

  24 Nov 2012 10:30:09 PDT--07:00 % SYS-5 - MOD_OK:Module 3 is online

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable)

  Console > (enable)

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable) 24-Nov-2012 10:30:22 PDT - 07:00 % SYS-5 - SUP_IMGSYNC:File synchronization process will start in 10 seconds

  Console > (enable)

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable)

  Console > (enable)

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable) see the race

  Current TFTP session. Try again later.

  Console > (enable) set enablepass

  The command is disabled until the system configuration file is downloaded.

  Console > (enable) 24-Nov-2012 10:31:23 PDT - 07:00 % MGMT-5 - SYS_CONFIG_START:System config began with the NVRAM configuration text file

  2012 24 Nov 10:31:24 PDT - 07:00 % SYS-5 - PORT_SSUPOK:Ports on supervisor ensures (module 2) are on the rise

  2012 on 24 Nov 10:31:24 PDT - 07:00 % SYS-3 - MOD_PORTINTFINSYNC:Port for Module 2 synchronization Interface

  2012 on 24 Nov 10:31:24 PDT - 07:00 % MGMT-5-config SYS_CONFIG_END:System finished

  2012 on 24 Nov 10:31:24 PDT - 07:00 % SYS-5-AUTOSAVE: auto-save timer started

  Console > (enable) set enablepass

  Enter the old password:

  Sorry wrong password.

  Console > (enable) set enablepass

  Enter the old password:

  Sorry wrong password.

  Console > (enable)

  Console > (enable)

  Console > (enable) 24-Nov-2012 10:31:44 PDT - 07:00 % SYS-5-SUP_IMGSYNCSTART: Active supervisor synchronizes slot0:cat6000 - supk8.8 - 1 - 1.bin

  Console > (enable)

  Console > (enable)

  Console > (enable)

  Console > (enable) set enablepass

  Enter the old password:

  Sorry wrong password.

  Console > (enable)

  Console > (enable)

  Console > (enable)

  I'm in doubt, because my config don't have any string on tftp.

  Could you help me?

  Thanks in advance.

  See the Configuration section below:

  !

  set password

  Set enablepass

  the value of disconnection 0

  set config mode text nvram

  enable auto-save set config mode text

  Set the interval for automatic saving of text config mode 360

  !

  #!

  #vtp

  the value of bms vtp domain

  VTP transparent mode set vlan

  game vtp version 2

  nwzbms name of vlan Set 7 type ethernet mtu 1500 said 100007 active state

  VLAN Set 30 name video_security type ethernet mtu of 1500 said State active 100030

  VLAN Set 31 name novinsky_31 type ethernet mtu of 1500 said State active 100031

  Set VLANs 1002 name fddi-default type fddi mtu 1500 said 101002 active state

  Set vlan 1004 name default fddinet type fddinet mtu 1500 said 101004 active bridge State 0 x 0 stp ieee

  set vlan 1005 trbrf default name type trbrf mtu 4472 101005 State assets bridge 0xf stp ibm

  define the vlan 1

  Set vlan 1003 default name trcrf type trcrf mtu 4472 said 101003 State active parent 1005 ring 0xccc off srb aremaxhop 7 stemaxhop 7 backupcrf mode

  !

  #ip

  set interface sc0 1 192.168.3.65/255.255.255.0 192.168.3.255

  set interface sc1 down

  set ip route 0.0.0.0/0.0.0.0 192.168.3.43

  set the alias default ip 0.0.0.0

  !

  #ntp

  set the timezone PDT - 7 0

  !

  Start #set command

  set boot config-register 0 x 2102

  flash slot0:cat6000 system starter set - supk8.8 - 1 - 1.bin

  !

  # Is the default port enable

  !

  !

  #module 1:2 - port 1000BaseX supervisor

  !

  #module 2:2 - port 1000BaseX supervisor

  !

  03:16 - port Ethernet, 1000BaseX #module

  set the trunk 3/3 on dot1q 1-1005, 1025-4094

  set the trunk 3/8 on dot1q 1-1005, 1025-4094

  !

  4:8 - port Ethernet, 1000BaseX #module

  !

  #module 5 empty

  !

  #module 6 vacuum

  !

  #module 15 empty

  !

  #module 16 empty

  end

  Hello

  You please set the binary model configuration mode (which is the default) then successfully to the "Console > (enable)" invites via the command 'set binary mode config' and then try the recovery procedure of password for the document again.

  Best regards

  Antonin

• GPS tracking location problem

  Hey everyone, I am using 4.6 jde

  I try to use the Coordinates.distance () function within an app that I'm building and my problem isn't really with the function itself, if I am controlled with 2 coordinates variable declared in the function that I use it it works. But I try to use a global variable of coordinates with this function, and when I try to update this variable seems not updated correctly. Dunno if im explaining so here is the code...

  //within uiapplication class
   private Coordinates _last;
  
   private class PaceListener implements LocationListener
      {
          public void locationUpdated(LocationProvider provider, Location location)
          {
              double longitude = location.getQualifiedCoordinates().getLongitude();
              double lat = location.getQualifiedCoordinates().getLatitude();
              System.out.println(longitude);
              System.out.println(lat);
  
              if(_updates == 0)
              {
                  _last=(Coordinates)location.getQualifiedCoordinates();
                  _updates++;
                  System.out.println(_updates);
                  return;
              }
              else{
                  Coordinates temp= location.getQualifiedCoordinates();
                  System.out.println("_______"+_last.getLongitude());
                  System.out.println(temp.distance(_last));                _last= temp;            }
  
          }
      }
  

  So my problem here is that no matter what the final location was System.out.println ("_" + _last.getLongitude ()); still prints the longitude variables temp. It's my debug output

  first round-

  21.0
  34.0
  ___21.0
  0.0

  second update-

  -81.0
  43.8
  _ - 81, 0
  0.0

  Thanks in advance for any help

  I guess I suspect object reuse - compare pointers and see if they are the same variable.

• could not access network location problems in the installation of nba 2 k 12

  pls help! i manually uninstalled my nba 2 k 12 manually deleting the folder tne itself... I want to install it again... problem now it is always say "could not access network location"... pls guys I need of your help... I'm using windows 7, 64-bit... tnx

  Hi Raymetalgear,

  It seems that the game is not uninstalled properly. I suggest to delete the game Application Data folder NBA2012 folder and try to reinstall.

  2012 NBA record will be stored in the following location:

  %USERPROFILE%\Local Settings\Application Data\ NBA 2012

  Let us know if that helps.

• Password reset problems

  Hello

  I was wondering if someone sees something wrong with this code, because it doesn't seem to work.

  After you have entered the email, a password to be generated and must be sent to the e-mail address of users (if it exists in the database). Or return an error message if there is no record.

  < form method = "POST" name = "loginform" id = "loginform" class = "form_area" >

  < div class = "loginwindow_title" > password forgotten? < / div >

  < div class = "loginwindow_subtitle" > enter your email below and we will send you your password < / div >

  < div class = "loginwindow_form" >

  < div class = "form_field" >

  < span id = "email_validation" >

  < label for = "email" > < / label >

  < input type = "text" name = "email" id = "email" class = "email_field" placeholder = "Email address" >

  < span class = "textfieldRequiredMsg" > please enter your account e-mail </span > < / span >

  < / div >

  < / div >

  < name of the button = 'submit' type = 'submit' class = 'login_button' > button < / send my password >

  < / make >

  <? PHP

  $email = $_POST ['email'];

  $submit = $_POST ['submit'];

  To connect to the DB

  $connect = require_once('Connections/drama_database.php');

  If {($submit)

  Check if the email exists

  $email_check = mysql_query ("SELECT * from users WHERE email ='$email '");

  $count = mysql_num_rows ($email_check);

  If ($count! = 0) {}

  Generate new password

  $random = rand (72891, 92729);

  $new_password = $random;

  Create the copy of the new password

  $email_password = $new_password;

  Encrypt the new password

  $new_password = md5 ($new_password);

  Update the database

  mysql_query ("update users set password = '$newpass' WHERE email ='$email '");

  Send the password of the user

  $email = ($_POST ['username']);

  //

  //

  //

  //

  BEGINNING OF E-MAIL.

  $msguser = "< html > < body >";

  beginning title.

  $msguser. = ' < h1 align = "center" > < strong password reset > < / strong > < / h1 > ';

  end of title.

  $msguser. = "< br >".

  $msguser. = 'This is a confirmation email regarding your new password for your account on the site WEB LINK GOES HERE.';

  $msguser. = "< br br > > <"

  $msguser. = "< b > This is your new password: < /b >."

  $msguser. = "< br >".

  $msguser. = "< b > echo ("$email_password") < /b >."

  $msguser. = "< b > please log in using the password above.» Once connected, click on the profile tab, and update your password. (Theprofile button can be found under your username in the upper right of the page) < /b > ';

  $msguser. = "< b > please go to: . Site WEB LINK GO HERE to log into < /b > '; '.

  END OF E-MAIL.

  //

  //

  //

  //

  //

  $headers = "from: Egham Drama Database < SUPPORT . "INSERT HERE the EMAIL> \r\n ';

  $headers. = ' reply-To: . "INSERT HERE the EMAIL SUPPORT\r\n";

  $headers. = "MIME-Version: 1.0\r\n";

  $headers. = "content-Type: text/html;" charset = ISO-8859-1\r\n ";

  mail ($email, ' Drama Database |) Password reset ', $msguser, $headers);

  }

  on the other

  {

  echo "this email does not exist ';

  }

  }

  ? >

  Thank you!

  Max Resnikoff says:

  The problem nutrient to connect to the database?

  For you, this is the connection string, which I used at the top of the page. (obviuosly replace the XXXX with your own login details ie username, password and databasename liked if the server is something other than ' localhost; changing also.)

  # Connect

  mysql_connect ('localhost', 'XXXXX', 'XXXXXX') or die ("could not connect: '.") mysql_error());

  # Choose a database

  @mysql_select_db ('XXXXXXXXX') or die (' could not select database ');

• create a new user with password expire - problem SQL Developer

  Hi people,

  I use RDBMS 11.2.x on Solaris and Linux, and in the face of a problem that I hope someone can help me with.

  Our policy is to create a new account with a temporary password and force them to reset the password at the first login.

  Therefore, I use: "create user < username > identified by < user > password expire...» »

  The problem is that many users use Oracle SQL Developer and do not have access to SQL * more.

  When I user logs in the database for the first time in SQL Developer, he just tells them that the account is locked.

  It does not say the password is expired, and it does not give them a way to change this (that I can find it).

  I'm not familiar with SQL Developer and hoped for someone who has had a similar problem can offer some suggestions.

  Thank you.

  Jim

  Change password dialog is no longer Pop Up after ORA-28001 (password expired) (Doc ID 811736.1)