Vista password, login problems

Similar Questions

• *! NOT your Vista password usual problem - Incorrect password every time

  Dear Experts and gurus,

  I've been using Windows for many years, but I've never met a problem like this.

  I use a HP Pavilion dv6675us laptop and Windows Vista Ultimate x 64. I'm not an expert but I am reasonably competent.

  Here are the symptoms and workaround solutions I've tried without success.

  1. my user account has a password.  The password has NOT been changed.  Or JUST changed the password and I KNOW what it is. Suddenly, last night todayafter a disconnect and restart the computer today, I can't log in again. IGet the message incorrect regular password. Vista Ultimate showsthe even index of password. However, we should not have the 'good' password.

  2. the only way to connect is to go into safe MODE and enter using my password. So, the same password works in safe MODE, but it does not work in Normal Mode. Even change the password cannot log into Normal mode.

  The process does not work even if I empty the password via the SAFEMODE and try and connect via the Normal of Windows mode.

  3. in Safe Mode, I created a new account without password (empty), but that does not work either.

  3A. If I create a NEW USER account (under safe MODE, then try normal connection). If the NEW USER password EMPTY he still does not go past the Welcome screen to log on to windows. If the new user has a password, windows does NOT yet recognize the password.

  4. I tried to click on the blue Accessibility button on the home screen, then select the type without keyboard. Then, I used the on screen keyboard to type the password. It works no more.

  In short, the only way for me to access the computer is via safe MODE. I can't access Windows in Normal mode even if I set up the new USER with empty password, but I can access this new user even with a blank password in safe MODE, or if a password has been assigned, I can use a new password in safe MODE.

  Can someone help me access windows in normal please? I would appreciate any Expert or guru can define a solution that works and which corrects this problem.

  I have never encountered this problem before and would really appreciate some help.

  Thank you in advance.

  Finally a solution that works-

  I used the restoration of the system under "Safe Mode" and takes over the system to the point a few weeks before the problem started and after what age seemed the old point has restored the system and I can connect in normal mode.

  Make sure what you do all the backups of data necessary.  As far I can tell - I have not lost any data.

  I tried several solutions, for example by trying to reset the user account passwords using a tool of the editor - that didn't work, I tried to clean the registry under safe mode - no luck, I tried to run anti-malware under safe mode software programs - but most antimalware programs don't work for vista 64-bit 32-bit only.   The programs that I've been able to run find no virus or malware so do not know what to do with why it happened.

  But low line system restore worked.  I was very worried about the restoration of the system was the second last method I've tried - with a final by reloading the operating system - which fortunately I did not need to.

• Password / login problem

  Hello
  
  I installed oracle 10g. It works well, but after that it says "connection refused, unable to open a session" and I have password expiration date chked its null and I gave a date even then I face same problem. So I reinstall every day, but is there a solution to this.
  
  
  coz I create my own picture space users and load some tables of soft working people. but I find connection problems. I saved the screenshots of db pswd / login I give evry time I load.
  
  
  
  .. KC

  Oracle 8.1.6 is released in 1999. I didn't know that you can still download.

  I installed 11g (2007) on a Windows desktop several times recently, and 10g (2004) is quite similar to the installation process and roughly the same configuration. 8i was probably similar, but I don't really know.

  "ORA-01034: ORACLE is not available ' means that the database is not running (or possibly SQL * more couldn't find) so you need confirm if it runs or not and from there. However this thread is about 10g connection problems. You should start a new thread for 8i startup problems. This forum is for questions of SQL and PL/SQL in any way - you could try {forum: id = 61} or {forum: id = 64}.

• What program do you recommend to set up a folder of Windows Vista password protected?

  What program do you recommend to set up a folder of Windows Vista password protected?

  What program do you recommend to set up a folder of Windows Vista password protected?

  Another way, a more simple, without using a 3rd party program or password, is of...

  Right click on the file > click on Share with > select person.

• can someone help me please, I have lost my vista password any ideas on when extracting even please

  I need help to recover my vista password please. ideas please

  I need help to recover my vista password please. ideas please

  If you mean that you've lost the password to log on to your computer, so the question is...

  What is a password for the administrator account?
  If so, I am afraid that we cannot help you.
  This Forum has strict polict prohibiting anyone helping users to bypass the protection passwrod. Regardless of the reasons.

  Here is the link to the polict said.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

  If it is a standard user account password that you have forgotten, then log on the administrator account and change the password in the standard account for something, you'll remember.
  (I don't think that this is the case in your situation. "You forgot your admin password).

• I forgot my Windows Vista password and the hint.

  I forgot my windows vista password and the answer to the clue. I tried many options, but it does not work... I don't have any what administrator, I'm onlu user.

  I don't have a bootable CD or anything at HP. Can someone help me as soon as possible.

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Vista password protection

  I used vista password my daughters computer and exclude administrator rights. I forgot the password and I forgot to do the backup disk to allow me to answer the question of safety. Is anyway around that I can't download updates of norton?

  Hi jstargazer,

  Please see:
  http://support.Microsoft.com/kb/189126/en-us
  "Microsoft's strategy concerning lost or forgotten passwords".

  Thank you for understanding! Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ My Blog: http://blogs.dotnethell.it/vincent/

• Password/login

  Hello

  My name is Keith Countess. I am interested in becoming a muse of adobe user. I was wondering if muse has the cabalitiy to put in a password/login? So that my members could access their own individualized custom profile.

  I would also like to ask if I would be able to charge customers for products or memberships if were to put in these sections of the site?

  I hope that my questions of meaning. Happy to clarify if I need to.

  Very impressed with the muse of adobe

  Keith

  Hi Keith,

  Features like the ability to register and you sign in with a username and a password is not possible directly in the Muse as he exits static pages only and is not interact with databases directly to perform functions such as user authentication, etc.. However, once you publish your site on Adobe Business Catalyst (which is homogeneous and integrated), you can certainly use its capabilities and various dynamic modules available directly in British Colombia to create login forms and record and insert them into the Muse pages in HTML format. However, be aware that any changes out of Muse, British Colombia, for example, will not appear in the Project Muse and there is no way to get the same thing in Muse easily.

  Business catalyst allows configuration online stores, the gateways, payment and management of databases of the client as well. You can read more about it here - http://www.businesscatalyst.com/features/online-store

  If you have any questions about hosting with Business Catalyst or one of its characteristics, in particular, please do not hesitate to post our dedicated forums of Business Catalyst - http://forums.adobe.com/community/business_catalyst

  Thank you

  Vinayak

• Win7/Satellite P200D - Admin Login - problem with keyboard - password is not displayed

  Hi all

  My Satellite P200D has Vista Premium o/s, was about 5 years old now

  Has worked well enough until the last of three months or more and developed a problem of restart.

  Hit restart button and it stops, then after several attempts get it at startup and on the screen that shows the internal PC Repair or Normal startup mode option. The only way that I can get to the login screen is to click on Normal mode as the automatic repair option does not work.

  Has decided to switch to Win7 to see if that would solve the problem.

  Now there is another problem, and it's the login admin password screen. The cursor flashes and any attempt to type password does not visibly show the words you type.

  Also tried and external usb keyboard does no difference

  Help, please

  Thank you

  I have the Satellite P200D with Win7 32 bit and it works perfectly.

  You have this keyboard problem when you start the operating system in safe mode?

• Start-up/login problem. Vista starts by the boot sequence then cursor and black screen appears but nothing else.

  My laptop recently locked up when running a DVD rip, I waited an hour or so to see if he would respond, but he didn't, so I turned off the laptop by holding the power button down. I restarted the computer and it loaded correctly to the logon screen and allowed me to log in as usual. Once the computer was connected, I noticed that the sidebar was not loading, and when I click on what whether the locked computer.

  To try to remedy this I tried to start the PC in safe mode to perform a restore could noticed that I had not created restore points. I then tried to fill a start last known good config upward, it did not work. Then, I tried a CHKDSK/r procedure at startup. It worked fine until step 3 of 5, on which he seems to hang, I left it overnight and it was still on the same stage. So I have powerd off the PC and tried to start. But now, the PC is delivered to the black screen and the cursor as shown above.

  I created the new folder of the event log of the prompt on the Vista recovery disc option

  I did a repair to start - no problems found

  I checked that regedit in this \Microsoft\Windows NT\CurrentVersion\Winlogon. shell contains only explore

  When you are looking for through other Forums a cause of this problem appears to be to do with the permissions of the user being changed by the chkdsk does not complete, however I don't see how to fix this through the command prompt.

  As noted, I can access command prompt on the recovery disk. Any help or suggestions are greatly appreciated.

  You already did a great job of troubleshooting - exactly what I would have recommended here if you had not already tried.  Play well!  Here is one that you did not and I would start one you tried (because I feel that it is perhaps the root of the problem.

  Go to start / all programs / accessories / command prompt, right click command prompt and click Run as administrator (you can skip this step if you are using the disk).

  If you use the drive, cd to C:\Windows\System32. Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  Try to put all the corrupt files here so that we can see if they can be repaired with good copies of the installation disc (unless there are too many).

  While in the command prompt, type chkdsk /f /r and enter and let it run.  She might want to plan itself to run at the next reboot (but I don't think that will happen if launched from the disk).   If so, answer Yes and restart to run the program.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.  I know you tried this before, but we'll try again by using a slightly different command and see if it works this time.

  I hope this helps.  If this isn't the case, then we should try to reinstall the system (backup first) as only option short taking in a computer repair shop. But we'll see what happens with the first above.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Netflix Login problem (Vista OS)

  I have Windows Vista and I downloaded the Netflix for Media Center app. Whenever I try to log on by using the application in Media Center, it tells me that there is a problem and to check my internet connection. My internet connection is always very good. My user name contains no special characters, and I have no record of trouble on my account with my internet browser.

  Known issues and limitations of Netflix on Windows Media Center for Windows Vista
  http://support.Microsoft.com/kb/972496

• Vista password rejected

  I have Windows Vista on my laptop with 2 users myself as ADM.    My computer stopped in the other night, everything was fine, not the fact that any change to anything, but I noticed had installed an update. The next day I turned it on and typed in my Windows password and he told me that the LOGIN SERVICE IS UNAVAILABLE... No matter what I try, I can't take my password. I even typed in a wrong and received the message that it was bad. I can access my account of girls but when I try to do something like ADM. I type the password and poof the window disappears and nothing happens. So I can't go to RESTORE or anything that could solve the problem. Cannot change the password or anything like that. Help

  Hello

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  And this is the Information from Microsoft on the problems of passwords;

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  See you soon.

• Forgot Windows Vista password, please help me

  HELLO TO ALL THE EXPERTS "
  I AM WINDOWS VISTA BUSINESS... I USE A LAPTOP DELL VOSTRO 1014 MODEL... 2 DAYS BACK I FORGOT MY LOGIN PASSWORD... DUE TO THE SIGNIFICANT IN THE DRIVE FILES C I CAN'T RE-INSTALL OS AGAIN... I ALSO DON'T HAVE PASSWORD RESET DISK... HELP PLEASE TO RESET THE PASSWORD BY RUNNING COMMANDS IN SAFE MODE R... PLEASE HELP ME OUT

  Hello SAI PERRON,.

  You can try this for  that will help you with your problem of password easily. I used it a dozen times and it really works! Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• login problem admin

  Hello

  I hope that there is someone who can help me.

  When I connect the iMac (el capitan 10.11.3), bought in February. 2016, with the admin account, there no problem.

  When I go to the user & preferences of groups to make some changes to the same admin account, I try to unlock the admin account. I fill the same password but it keep nine of the 10 times saying the password is not correct. I tried to change my password but he repeats to me that the password is incorrect. I do not use my ID apple for this admin account password. I would like to open a session without trying 25 times or more...

  Thank you for your attention,

  Kind regards

  Toos

  First, please ensure that caps lock is not on. Note that on some models of laptops, the LED of the caps lock key may not work when you start up if FileVault is turned on. When shift caps lock is enabled, there will be an arrow icon in the text box where you enter the password. Build on this, not on the LED.

  Another reason why the password can not be recognized, is that the keyboard (input source) in the login screen is not what you expect. You can select one of the available provisions by choosing in the menu flag in the upper right, if it is displayed, or even browse the by pressing the key combination command-space or command-option-space.

  If the user account is associated with an Apple ID, and you know the password Apple ID, then maybeApple ID can be used to reset your password for the user account. In OS X 10.10 and later versions, this option also works with FileVault, but only if you have enabled when you turn on FileVault. It is not retroactive. If not, see below.

  Note: If you have enabled FileVault, this procedure does not apply. Follow rather the instructions on this page, under the heading "If you forget your password."

  Start in recovery mode. When OS X Utilities window, select

  Utilities ▹ Terminal

  in the menu bar at the top of the screen, not one of the items in the OS X Utilities window.

  In the window that opens, type this:

  resetp

  Press the tab key. The partial order you entered will automatically end this:

  resetpassword

  Press return. Opens a window to reset the password. Close the Terminal window to get him out of the way.

  Select the boot volume ("Macintosh HD", unless you have given it a different name) if not already selected. You won't be able to do this if FileVault is turned on.

  Select your username in the menu option allows you to select the account if not already selected.

  Follow the prompts to reset the password. It is safer to choose a password that includes only the characters a - z, A - Z and 0-9.

  Select

  ▹ Restart 

  in the menu bar.

  You should now be able to login with the new password, but will reset the keychain (empty). If you have forgotten the password for the keychain (which is normally the same as the password for the connection), there is no way to recover it.

• Compaq presario CQ56: password login

  login password does not work and can not change.  Has been authorized so far.

  Message on the screen after said failier

  The user profile Service service has no logon.

  User profile cannot be loaded.

  Tried various things but no go.

  After turning on the laptop start to tap the F8 key to enter the Advanced Boot Options. In the Advanced Boot Options screen, use the arrow keys to select Safe mode, and then press ENTER. Once in safe use system restore back to a date before the problem started. Click on the Start orb and in the search for the type system restore box. In the list that appears, click on system restore. Choose a date before the problem and run the restore.

  Another way to get to system Restore_Immediately after turning on the laptop start pressing the F11 key. HP Recovery Manager opens. On the menu screen, select System restore- don't select System recovery. Choose a date before the problem began to be restored.