past messages

Similar Questions

• iMessage problem does not receive past messages

  I recently left the country for a month had to remove my sim card to avoid any roaming charges. When I came back I put my card back in and realized that I had not received one of my last iMessages or missed calls a month. Even during my trip, I had wifi but without the sim card I have still not got any iMessages. I called apple about the problem and my phone carrier and have updated my phone to the latest version, but nothing has worked for me. Basically, I'm trying to just go back one month messages and missed calls that may be important for me. Any thoughts?

  You will get back iMessages old. They are not be stored anyhere for you to recover from. In regards to missed calls, I'm not aware of your rack system record any kind of list of missed calls, but the carrier must be the one to answer that question. Unless the caller has left a voicemail, calls are gone.

• I get a message that says: "this connection is not approved" whenever I try to access ANY Web site

  I looked through previous questions and remove any software suspicious (it was not really, just a Bing bar). I deleted firefox and reloaded it. I bought Norton Antivirus and ran a scan - nothing. Date and time on my computer are correct. Explorer works very well. Help! I prefer firefox, but I can't access ANY Web site. I get this message every time.

  I've been down all the instructions on the Firefox support forum, and nothing has worked. The question may not be the Web site certificate, because it happens to EVERY SINGLE website I try to access. Nevertheless, I have add an exception for Facebook according to the instructions. That caused a strange page, not formatted to come. Since, I have read that to make an exception is dangerous because it can cause MORE unwanted malware to infect the computer.

  However, I did figure it out on my own so maybe this will help those who are facing this problem in the future: after reading the past messages from those who have experienced the same thing, I realized that, in all cases, the solution was to remove some kind of unwanted software (malware). I'm very careful NOT to download the software and I noticed that another victim of this says the same thing, so it's sneaky. I even bought new software (Norton) antivirus, performed a scan and the problem has not been found.

  I went to programs "to uninstall programs," sorted by date and anything that looked suspicious that was recently removed. I had something with the word "rocket" in it. It looked like a game. There is also another program that I removed (don't remember the name of it now). Removing those does not solve the problem, so I returned through all programs on my list and removed something that said "toolbar" on this topic, even if it was reliable (I had a bing and google toolbar). That doesn't seem to work either so I sort the programs by date again and I noticed that the software "rocket" was ALWAYS THERE.

  I have a click with the right on it and then click on 'uninstall' button again. It takes unusually LONG for this program uninstall AND nothing appears on the screen. The computer has just sort of is there and does nothing. I left and when I came back (about an hour later) the program had disappeared from the list.

  Firefox now works. I no longer receive this message, but here's the deal: I'm not 100% sure what program was the problem. It was this software of rocket or one of the toolbars. Nevertheless, the answer always seems to be some kind of unwanted malware, so I recommend that any victim of this problem try to uninstall the suspicious programs initially. And this means that ALL suspicious programs are RECENT, regardless of if they resemble games or antivirus or another. If it is new and you do not download it, uninstall it.

• Import e-mail messages from Windows mail to outlook 2007

  I damaged an old laptop and the hard drive is now in a case that I can access via USB.

  I want to transfer my emails from WIndows Mail in the old hard drive to Outlook 2007 into my laptop current. How to do this please?

  Hi Tony,.

  You can always open Windows mail? In this case: the open, select the e-mail messages you want to copy, create a folder on a USB or other portable device, paste messages, transport the unit, open, select all the messages and copy it (ctrl + c), then paste in Outlook.

  The official way would be: file, import and Export Wizard. But I'm sure you will all future posts.

  Kind regards

  Hans

• How to create a signature cards to attach to emails

  I have windows vista Home premium and would like to know how I enclose my card of PDF file to all past messages?  This can be done so that you do not manually attach your card to each pass by email.

  Hi, caymo:
   
  Unless someone has a better idea...
   
  Open a new message window and add the attachment. Then: File | Save as and save a desktop .eml file. When you want to send a message, simply click on this shortcut icon instead of create a new message and a new message window will open with the already attached PDF file. For more convenience, you will probably want to drag the shortcut to the taskbar icon.

• I need to know if the Z5 will be available in U.S. stores.

  Before I spend $700 on a premium warranty Z5 on Amazon, I need to know if Sony ever plans when the Z5 series is released in stores over the next two months. By the looks of it, he doesn't look like that but maybe someone has more information on that here.

  Thank you

  @Ninjabird7

  You may contact Sony directly > Local support

  but check your past messages

  you already have an official response

  http://talk.sonymobile.com/T5/Xperia-Z5-Z5-compact-Z5-premium/Z5-premium-us-release/m-p/1068981

  Maybe there will be more information after THESE, I have a premium of Z5 and its amazing.

• Read the file from the system of files in Flash with Actionscript

  Hello world. I am in the design phase and want to make sure that what I intend to do is possible. I use Flash CS5 and you want to review the system of the PB, or a folder of music files. Is this possible? If so what part of the Actionscript API should I watch?

  Locate the flash.filesystem stuff, and note that your application must have a blackberry file - tablet.xml so that specifies the permission of "access_shared". The forum for this search should appear many in past messages with details.

• BlackBerry Smartphones Radio path unavailable - Curve 8310

  Hey all,.

  Today, I can't call a phone number that I use every day.  It doesn't ring when I dial the number, I get this annoyed ding-ding-ding! tone and an error message on my phone saying "Radio path unavailable".  I use AT & T and the network in Houston Texas and I can't call the local number.  However, I can call other numbers of fixed and mobile phone local calls (even from the number I can not connect to).  In past messages, people say there is a problem with Blackberry and their tricks, so I call them to report this and get a response when it will be fixed... any other advice is appreciated, thanks.

  PS. I rebooted my phone with battery and removing the SIM card and it solves nothing.

  -Annoyed

  I spent hours on the phone trying to solve this problem.  All first with AT & T and the Blackberry (1-877-255-2377 in the case that you can do better).  None were able to tell me what was the cause of the problem or fix.  I discover that other AT & T phones other than Blackberry users WERE able to call and connect to the number I can't... not only that, but one another Blackberry user on the AT & T network could not dial the number either! BlackBerry wanted to transfer me to AT & T and I asked the rep Blackberry to guide me through the update of software which I spent 15 minutes listening in silence and I am frustrated because the Blackberry updates are not automatic like the Verizon Droid, you will need to plug into a PC via USB - lame.  I gave up at this point and decided to switch my phone to something, anything!, other than a Blackberry and get this.   During these telephone conversations I repeatedly the number dialed and received the error message "Path unavailable Radio" - and I was on the phone with AT & T and the Blackberry in the fixed network - after ALL this I tried calling the number once more and guess what... IT WORKED AGAIN! Thanks for nothing - I knew it was the freaking early towers - BLACKBERRY is the worst cell phone in existence. -Well bored

  PS thanks to God I have VERIZON and a DROID... it was for my mother's phone, she couldn't call my grandmother fixed...

• Question general Forum

  Hi all

  I don't know what happened, but I get all THE adobe forums emails & is my Inbox be flooded with emails! How is this happen and how can I get him to stop.

  I haven't posted a question or tried to follow a discussion in a few months, all of a sudden I get thousands of emails a day from these forums

  Notice of unwanted emails

  Click on your avatar image near the top right corner (slightly to the left of the pencil) and select PREFERENCES, set all the preferences off email, then click on save at the bottom left

  AND

  Another novelty is that Jive7 is oriented to social networks... so whenever you start or reply to a message you are automatically added to a watchlist... which means that you receive a notification for each subsequent message in this thread

  .

  Click on the link at the top right and select STOP NEXT... and do not click on the link to check your status, you will be added to the FLOW of CONNECTIONS and you will need to uncheck this option so

  .

  And after validation in a message thread and select stop next, you need to do all of this even more the next time you add an answer to the message, thread since EACH POST adds you to the automatic follow list

  .

  Look at past Messages

  Click on your Avatar image to the left of your message

  Click the option for the activity

• Why the forums seem to disappear?  You try to avoid the real issues?  You're just in it for the money and not to advance creativity.

  So, I asked a question, had a normal BS corporate scripted answer, then tried to track and, wow, no surprise in this day of Trump and other fascists (aka Adobe), could not ask a follow-up question.  Is it a real community or just a false sense of participation provided for by Orwell?    How do real people, real creations, the problems (and there ARE real problems with this stupid CC model)?

  What is the procedure for tracking issues, troubleshooting, etc.?  Or y at - it no, and does not care about Adobe?    BE SPECIFIC.     GIVE A CLEAR PROCESS, VERY VERY CLEAR, STEP BY STEP TO FOLLOW OR JUST ADMIT THAT YOU WANT TO SKIP THIS QUESTION AND THE BEAK OF USELESS PLATITUDES.

  You posted this at 08:13 if ask you questions about the MESSAGE, no forum, where you posted at 8:17 in when the student teacher rate goes up to 50% at the end of the first year, which is the motivation to continue?  Customer loyalty is not rewarded but punished. ?

  Look at past Messages

  Click on your Avatar image to the left of your message

  Click the option for the activity

  User manual for the community of Adobe (forums) https://forums.adobe.com/docs/DOC-4714

  -or http://docs.jivesoftware.com/jive/7.0/community_user/index.jsp

  The answer to your other question IS clear and concise... Adobe, like many other businesses, offering a discount to new buyers... and at the end of the discount period, the price goes up to the usual amount

  If you don't like that, very well... but Adobe isn't the only company that has further reductions of the buyer

• Tattoo in web galleries.

  Don't know what I'm doing wrong, but I don't get all visible copyright watermark.  In the library, I synced all information copyright, but in the Web module, I check the box watermark with Simple copyright, the progress bar indicates something is happening, but when one of the photos are read there is no copyright watermark.  I know it's usually me something wrong, but I don't know what it is.  The watermark in the past messages do not address this question.  Any help would be appreciated.

  This is a known bug and has been reported.

  The simple copyright watermark does not work in the web module.

• Browsing this forum

  So I would like to browse past messages to see if any applies to some of the problems I encounter. But I can't seem to find the 'next page' button on this forum. Apparently I don't see that the 10 last posts... did I miss something?

  Click on the profile link above the forum name, and then click personal options. You will see an option for "days back to view topics for:"put a large number in there, for example 99999999999 and voila! " You can view all jobs.

• whenever I try to, the open, Tunes, I have, get, message:, the file, "Ditties", is, on, to, locke d, drive, or you do not, write, permissions, for, this, file., Suggestions, to get on the past, this?

  whenever I, try to open it, Tunes, I have, get, the, message:, the folder, "Ditties", is, on, to, locke d, drive, or you do not, write, permissions, for, this, file., Suggestions, to get over the past, this??

  How about you post that again without commas and maybe then I'll read it?

• Recently, a problem began when I cut-and - paste into a new E-Mail. Sending error. Message indicates error attaching "call_skype_logo.png." File not found

  The message send failed.
  There was an error of fixing call_skype_logo.png. Please check if you have access to the file.

  I did not indicate the Ctrl + V, I suggested that Ctrl + Shift + V, and if I didn't, it was a mistake.

  What is happening is that information from the copy of the web page contains an image that is not visible and can be invoked with javascript. Thunderbird is sticky to ok, but when you try send this image (common, through the internet, as Skype image that appears with facebook, twitter etc. can not be found. I don't really know what code complex your copy and paste and I doubt you do one. CTRL + SHIFT + V just glue the text without frills. Nothing else and should have no problem at all because the reference to the image should be absent.

• [BUG] Cannot copy / paste on Messages

  I noticed a bug (ip 6, 6 s on ios 9 x, beta 10) where I have you press and hold (not 3D touch) on a phone number in a message and when I hit 'Send Message' context menu opens, it will not copy and paste. Someone at - it similar experiences?

  If you are running the beta version of iOS 10, this is the wrong place to ask for help. This forum is for help with the current releases of iOS audiences. We do not run iOS 10.