Past reports and then zero points quiz

Similar Questions

• Possibility to change the BA, TABLE name for a report, and then keep putting in the form

  Hi all
  
  I have a report from a custom folder of BA1 xx_test1... Now, I want to modify the workbook to use the custom file BA2 xx_test2.
  The custom folders have the same exact columns.
  
  Is it possible because I dione a lot of formatting and donot want to redo everything again. ?
  
  Thank you
  VJ

  Hi Vj
  Let me explain a few things about Discovererw workbooks.

  All the code needed to run than a workbook is embedded in the workbook. There is no record of SQL that you can go change the code. Discoverer incorporates the name of the file and identify as well as the name of any joint used. You can change the name of a folder without causing any problem as long as you do not modify the identifier as well. When the workbook opens then he will still find the folder. You should save the workbook again at this time so that the appropriate folder name is saved too.

  Interestingly, the corporate domain names are not included in the workbook. If the Finder can locate records is any accessible business while the workbook is open.

  So here's what I'd do:

  1. get the new SQL for the custom folder and replace the SQL in your existing folder

  2. rename the folder in the name you want to use. DO NOT modify the identifier and DO NOT change the names of all the joints.

  3 try to open your workbooks. They will find the file and continue working

  With regard to a new BA, here's my recommendation.

  1. create a master BA for all folders

  2 use folders to manage in the Admin tool, I'd share any files with this master BA - then you have an area for maintenance

  3. create a new empty BA

  4 use folders to manage again, sharing folders, you need the new BA - the joints will get too shared

  5 using the tools | Security, grant users access to this new BA and remove access to any former

  That's all. The workbooks will find records in the new BA and continue as before.

  I'm really sorry about planning. This is an option you should use really. It sounds like your business might need a discoverer health check, to make sure that you use it properly. Have a look here: http://ascbi.com/consulting.htm

  I hope my answers above help
  Best wishes
  Michael

• Display element should be displayed after report and before the button

  Hello
  
  I use apex to oracle 10g 3.2.
  I created a region with report, hidden item, display only point and a single button.
  
  Now, I want to report is displayed first and then show only, then the button.
  But somehow the item displayed is displayed first then report and then the button.
  
  What to do to change?
  
  Thank you

  Make sure that the point of view from the region is one of

  Body of page template (1. elements located under the content area)
  Body of page template (2 items below the content of the region)

  and is not

  Body of page template (3 items above content area)

  This is the part ' elements above/below the content of the region "who controls where are display the elements of the region.

• I have a PC brand new - HP and played Chess Titans. Now all of a sudden it says it cannot find the texture, but he said no zero the reference count and then could not find device 3D.

  original title: Chess Titans

  I have a PC brand new - HP and played Chess Titans.  Now all of a sudden it says it cannot find the texture, but he said no zero the reference count and then could not find device 3D.  What's past and how to fix this.  Thank you.

  These error messages can occur if you (or software) also disabled Aero. Aero must be on (and supported by the video card) to play Chess Titans. "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• After 20-30 minutes my computer crashes with a blue error screen and then reports an error on the desktop on restart, this happens when the desktop is idle or playing games, I get the below error

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.0.6000.2.0.0.768.2
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini111709 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 81FA7519
  BCP3: 851D1F98
  BCP4: 00000000
  OS version: 6_0_6000
  Service Pack: 0_0
  Product: 768_1
  Information about the server: a64044ff-cd2c-4992-88b5-e4083f658b84

  Hello

  Two main causes of this blue screen video drivers and BIOS - check with system manufacturer site for
  View of the adapter (video) and BIOS, then on site of the manufacturer of the device for the last video. There may be other drivers
  in order to check there. DISABLE the auto-pilot plant as those who are older and if updates Windows suggests
  a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I can create a branch to several branches then have a quiz and evaluation at the end of each branch?

  Captivate 9

  I can create a branch to several branches then have a quiz and evaluation at the end of each branch?

  The situation: I have 10 roles taking the same training.  each will have to branch halfway through and take their own quiz.  It needs to report on completion of 80% of cornerstone LMS.

  You can take a look at a use case in this blog: branch aware Quiz - blog of Captivate

  If you can deal with limitations of navigation because of the current branch, you will see that it works very well.

• Number of words and then pasting text into the text block

  I'm trying to create a javascript script that counts the words in a block of selected text, adds "WORDS." at the end and then paste at the beginning of this block of text with a "BOLD" character style applied. So he would look like:

  25 WORDS. Text text text text text. etc.

  I managed to find a way to create the character style, to count the words in the selected text block and give me an alert. But I'm not sure how to apply the character style and paste it at the beginning. Any help would be really appreciated. Here's what I have so far.

  Thank you

  -----------------------

  var curDoc = app.activeDocument;

  mySel var = app.selection [0];

  Create the style of wordcount

  If (! curDoc.characterStyles.item("wordcount").isValid) {}

  cStyle var = curDoc.characterStyles.add ({name: "wordcount"});

  }

  else {}

  cStyle var = curDoc.characterStyles.item ("wordcount");

  }

  cStyle.fontStyle = "Bold";

  //

  var mySelWords = mySel.texts.everyItem (). words.length;

  var mySelStoryWords = mySel.parentStory.words.length;

  Alert (mySelWords + "WORDS.");

  Hello

  further, through the selection, change the same way:

  var
       curDoc = app.activeDocument,
       mySel = app.selection,
       len = mySel.length,
       cStyle = curDoc.characterStyles.item("wordcount"),
       mySelWords, mString, curSel;
  
  if (!cStyle.isValid)
      cStyle = curDoc.characterStyles.add({name: "wordcount", fontStyle: "Bold"});
  
       while (len-->0) {
            curSel = mySel[len];
            if (curSel.hasOwnProperty ("insertionPoints") ) {
                 mySelWords = curSel.texts.everyItem().words.length,
                 mString = mySelWords + " Words. ";
                 curSel.insertionPoints[0].appliedCharacterStyle = cStyle;
                 curSel.insertionPoints[0].contents = mString;
                 }
            }
  

  Note that textFrame.words County is those visible only, so the other part of the text is excluded.

  If some of the answers have been useful - mark (their), pls ==> it's a good indicator for other researchers and a few points for me.., mlask.

  Jarek

• Why can I most add links to the emails simply cut and paste the link, and then hit return?

  Hi... I just noticed lately that when I want to insert a link in an e-mail, I can't simply copy the address, paste in my message and press return for the address to become a link. I now have to Ctrl-click on the highlighted address and 'Add link' to make a link. the former simplified function just disappeared with an update? any help would be appreciated... Thank you!

  Restart your computer, and then try again.

• I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  BabsMKE wrote:

  I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  settings - do not disturb - off

• Whenever I start Firefox, my home page is displayed, and then another tab of a page I looked at in the past. I don't know how to do stop loading up this extra page on start up. Suggestions? Thank you!

  Whenever I start Firefox, my home page is displayed, and then another tab of a page I looked at in the past. I don't know how to do stop to load to the top of this additional page at startup and can't seem to find information on how to disable this junk page. Any suggestions? Thank you!!

  Maybe you inadvertently set both pages to be your Homepage"(s)"?

  See How to set the home page

• When I click on a link in a new tab is no longer open in Firefox. Now, I have to copy the link, manually open a tab and then paste the link. Simply, this started happening a few days ago and I haven't changed anything in my settings. Can anyone help?

  When I click on a link in a new tab is no longer open in Firefox. Now, I have to copy the link, manually open a tab and then paste the link. Simply, this started happening a few days ago and I haven't changed anything in my settings. Can anyone help? Thank you

  This problem may be caused by an extension that is not working properly.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Found that this problem was due to windows being disabled "Wireless Zero Configuration" service. Found this automatic setting and then by installing the software corrected the problem.

  How to get through this process of changing windows 'Wireless Zero Configuration' service is disabled.  Found this automatic setting and then by installing the software corrected the problem.

  Hi Joseph,.

  1 are you always face the question or the issue are already fixed?

  2 Windows operating system you are using?

  If you still experience the problem, you can follow this link completely and check if the problem persists.

  In the Windows wireless network connection problems

  You can also read the following article and check.

  How can I disable wireless configuration and enable Windows XP Wireless Auto Configuration services

• Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero. »

  Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.

  Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.

  ====================================
  After making your change did you left click... Apply / OK?
  John Inzer - MS - MVP - digital media experience

• The problem is that the laptop start everything that I have the password and then just black screen with pointer

  I opened the pc it starts but then a black screen comes with the pointer only if I open the task manager(ctrl+alt+del) I see that explorer.exe is running! If I close the explorer.exe and reopen it all comes on the screen but the wifi does not work! so I have to do other things to fix the wifi and then the laptop is open! Whenever I restart or stop the same problem is back! Please help me!

  It's the sollution... I almost tried everything!

  http://www.YouTube.com/watch?v=D6D-M9Uc1AA

• Program (API?) to assign the point so to identify and then import the catalog element_values

  Oracle Applications 11.5.10.2

  We have defined a new catalog with element names. Now we need to import the item for about 1000 items values.  I find APIs and procedures for importing the item values, but all methods require the first time the item gets assigned to the Group of catalogue with the help of the form of Oracle Applications.  I don't want you must do manually for 1000 points.

  How can I programmatically assign the item to group catalog (I think fills the table MTL_DESCR_ELEMENT_VALUES with element_names, but with null values)?

  Well, I thought about it.  I had to use the EGO_ITEM_PUB. Process_Items API for updating of the catalogue of point category that inserts the rows of null value in the MTL_DESCR_ELEMENT_VALUES table, and then run the update of the element_values API.  See Doc ID 1152476.1.