Patch 17919161 for R12.2.4 update failed

Similar Questions

• Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) update - fail with the error 800b0100 Code

  Original title: several installation update of Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) but fails with the error 800b0100 - tried Code recommended fixed but nothing works - any ideas? Alan R

  Installer standalone and patches already installed - laptop Medion used - all other updates loaded ok - also tried PC Tuneup of Maestro.

  Hi Alan,

  Thank you for visiting Microsoft Community.

  To resolve the problem with the installation of the updates, follow these methods:

  Method 1:

  See the article and check if that helps:

  Error 0x800B0100 when you try to install updates for Windows or Microsoft Updates

  Method 2:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I suggest that you follow the steps described in the article and try to reset Windows Update components:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• The TOSHIBA for Bluetooth ACPI driver update failed

  Hi all

  I have a P870 running on Windows 7 & until recently BT worked fine, now it doesn't.

  When I tried to download the latest version of the driver it says that I have the latest version of the driver.
  He also says that the device is functioning properly.

  It does not recognize my S4 where before he did.
  I now can not get it to pair because he does not see.

  When I did the last update of MS that I noticed the results put BT update failed, as shown below.

  Any ideas on a fix would be appreciated.

  The TOSHIBA for Bluetooth ACPI driver update
  Installation date: 08/08/2015-09:37
  Installation status: failed
  Error details: Code 80246005
  Update type: recommended

  This driver has been provided by TOSHIBA for the support of Bluetooth ACPI

  More information:
  http://sysdev.Microsoft.com/support/default.aspx

  Help and Support:
  http://support.Microsoft.com/select/?target=hub

  BT is activated using the function keys?

  What is the status of the Bluetooth technology in Device Manager?
  You see errors, some yellow exclamation?

  What you can do is use provided by the windows system restore and backup option and return to the point of time at the beginning, before the update have been installed...
  No doubt this has problem of BT

• latest patch available for R12

  Masters of Hello,
  
  I would like to know that how can I know that the latest patch for oracle apps R12 is released y oracle... .i searched on metalink... is there any document that will give me details on the latest available patch?
  
  Thanks and greetings
  VD

  Hello

  Use the patchsets.sh script, it should tell you the Group of hotfixes you are on for each module, and what is the last group of patches available on Metalink.

  Note: 139684.1 patchsets.sh - Oracle patches comparison Utility group current Applications:
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=139684.1

  You can also get this from:

  MetaLink > patches and updates & > Quick links to: latest Patchsets, Mini Packs and Maintenance Packs (or recommended Patches for Oracle e-Business Suite 11i/R12).

  The latest version of R12 was 12.1.1

  Note: 790942.1 - Fund Documentation Oracle Applications, exit 12.1
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=790942.1

  Kind regards
  Hussein

• KB2288931 of security for the 2007 Office update fails to install

  KB2288931 of a security update for Microsoft Office as of 12/17/2010 repeatedly fails to install.  There is no error code.  All other updates 17/12 and since have installed successfully.  I have Vista Service Pack 2.  All solutions?

  Give it a shot, Bill. Download and Save the Fixit on this page -How to solve the problems of corruption MSI software update registration

  Once the download is complete, first manually create a system restore point - How to create a Vista System Restore Point

  Second, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: In the Clean boot state all the firewalls of 3rd party will be disabled. Disconnect the system from the internet now or open Windows Firewall in Control Panel to make sure that it is now on.

  Now run MicrosoftFixit50123.msi, reboot the system if prompted.
  See if the update installs now.
  If she does or does not work, Cancel the clean boot procedure now and restart in normal Windows mode, please.

  -

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Expert MowGreen Windows IT Pro - consumer safety

• (KB2378111, 12.0 MB, published 12/10/10) for Windows Vista security update failed with error 800b0100.

  Update of security (KB2378111, 12.0 MB, published 12/10/10) for Win Vista failed with the error 800b0100. Failure of several attempts, power, played external parser M.S., downloaded System Update Readiness Tool, saved the file on the desktop to install proxy server disabled by bike. Nothing has worked.

  Start a help tickethttp://support.microsoft.com/common/international.aspx?rdpath=1&gprid=9860>

  See the section "How to get help" of http://support.microsoft.com/kb/2378111

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start a free Windows Update support incident email request:https://support.microsoft.com/oas/default.aspx?gprid=6527

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  OPTION has:

  • 1. open IE 32-bit (only) to https://consumersecuritysupport.microsoft.com/

    2. click on security updates aren't installed properly

    3. on the resulting page, click CONTINUE

    4. Select an appropriate country and language, and then click CONTINUE

    5. click on the option support by PHONE or email.

    OPTION B:

    Start an email from Windows Update support incident request for free

    https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

• Security for Windows XP KB2779030 update failed.

  I am running XP Professional on my laptop. I get the security update for Windows XP KB2779030 failed.

  Someone at - it solutions?

  Thks, Len

  Hello

  Thanks for posting the request in the Microsoft community!
  We'll get you help with the steps of troubleshooting of this will hep you by installing KB2779030 on the computer.

  Before continuing with the steps, provide us information.

  1. you receive an error message on the computer?
  2. what anti-virus software is installed on the computer?
  3. don't you make changes on the computer before the show?

  To fix the problem try the following steps:

  Method 1:
  Run the fix it and check.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Perform a clean boot and check if the third-party software are causing the issue of updating. How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Method 3:
  Try manually installing updates from the link:
  Update security for Windows XP (KB2779030)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=35863

  Please respond with the information. I'd be happy to help you further.

• TRIED FOR MONTHS! CONTINUALLY UPDATES FAIL! WHY?

  Tried for months to install the latest updates for:
  

  Update of security for Microsoft Office 2003 (KB2597112)
  Update of security for Microsoft Office Excel 2003 (KB2597086)
  Update for the filter of junk e-mail in Outlook 2003 (KB2598343)
  Update of security for Microsoft Office Word 2003 (KB2598332)
  Update of security for Microsoft Office 2003 (KB2598253)
  Update of security for Microsoft Office 2003 (KB2598361)
  

  Always, they fail to install, WHY? I'm TIRED of trying, I quit!

  ~ Patsy Lee

  EL CAJON, CALIFORNIA.

  Hello Tommy.

  I went to the link, which is a very LONG page, don't see where to download, and when I did, it was for Windows Media Player which I use EVERY day. So, I sent the guy an email earlier. We'll see what happens.

  ~ Pat

  The links that should be found on this page:

  Download ProduKey (Zip file)

  Download ProduKey for x 64

  Download ProduKey with full install/uninstall support Probably the last one that will work best for you.

• Update wants to install several updates security for Office 2007. Updates fail (error code 80070652 0 x).

  I'm using Windows XP (SP3)
  Ofiice XP (ver 10.0.6626.0) with the Office 2007 compatibility pack. (SP2) (worm 12.0.6425.1000)

  Hi LawrenceHoetzlein,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• Error code 8007671C Cumulative security update fails to install

  For IE8 Cumulative security update fails to settle whenever we're trying. 8007671 C error code.

  Hello

  1. do you have security software installed on the computer?

  Method 1: Try to set up your computer in a clean boot state, then try to install the cumulative security update and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  You can also consult the following link for more information:

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

• PS4000 firmware update failed

  The event ID: 30.4.1 table firmware version V6.0.11 for 7.0.1 update failed. Reason: Another copy of the update is already running. .

  I'm moving to 6.0.11 to 7.0.1, so I can add my new ps6100 to the group.  FTP seems to happen when I do the mistletoe group management.  But when it gets to step 2 from upgrade fails before reaching 1%

  My other set ps4000 up-to-date without problem.

  Any thoughts?

  Gift of greetings,

  This problem has been resolved.   It was a problem with the controller, the controller had been for more than 500 + days.  This support has me initiate a reboot on the controller, once it was full, I ran the upgrade to 7.0.1 of the other controller without problem.  Then I switch to 7.1.5 to match new hardware, I install and when new material is attached to the group I will switch to the current 7.1.X

  Thanks for the help

• CC app manager update failed with error 50 code after reaching approximately 35%

  Try to update the app CC Manager. The update is still very slow (I have ATT DSL, lowest level) and I usually stop after an hour or two. Today I let it run and it failed with the error code 50 after reaching approximately 35%. Any ideas?

  Update my original post. I read through some of the suggestions I found in other threads to solve this problem, and it seems that this is a recurring problem. Many corrections have been suggested, some very convoluted, difficult and involved, including those who came to the customer support people.  I passed on those who, like this must be something simple. How Adobe managed to leave their own tour of software update in a persistent problem is beyond me and kind of defeats the object of the subscription. I then noticed that a simple fix has been proposed several times, so I tried.

  The user suggested fix that worked for me was:

  (1) restarted the computer (machine of i3 Asus Windows 7 for me) in Mode safe mode with networking. Connected to my separate Admin account just in case.

  2) started the creative cloud desktop application.

  (3) the app said it had to be updated. I hit the update button.

  (4) update started and proceeded slowly as he was in a lot of previous unsuccessful attempts (I have ATT DSL to the slower level, but it is not switched). In 30 minutes, the update succeeded.

  (5) restarted the computer in normal mode.

  (6) the creative cloud desktop application now has not said he should be updated, and I can update my other apps normally. Have not updated LR or PS again, but intend to try. If this fails, I can try to do in Mode safe mode with networking.

  So, it's been relatively painless and much much simpler than most of the other suggestions I've seen. Don't know if this will work for everyone, but I wanted to post the solution that worked for me. Thank you very much for users of 2 or 3 which had proposed this hotfix earlier (sorry, I did not write down your login, but threads can be found in search for creative cloud desktop update fails error code 50). Hope this saves some people a lot of time.

• 11.5.10.2 to R12.1.1 update: error loading of seeds for GL_DEFAS_ACCESS_SETS data: DEFINITION_ACCESS_SET = SUPER_USER_DEFAS, ORA-06508: PL/SQL: called program unit is not found

  Hello

  Version of the EBS: 11.5.10.2

  DB version: 11.2.0.3

  Version of the OS: AIX 6.1

  Under 11.5.10.2 R12.1.1 update, while implementing a merger 12.1.1 upgrade driver (u6678700.drv), we got below error:

  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

  ATTENTION: All workers have failed or are pending:

  IMPOSSIBLE: folder glsupdas.ldt worker 3.

  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

  drix10: / fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log > tail-20 adwork003.log

  Restart the task that failed and has been corrected.

  Time, when the worker restarted job: Wednesday, August 7, 2013 10:36:14

  Loading data using FNDLOAD.

  FNDLOAD APPS / * 0 DOWNLOAD @SQLGL:patch/115/import/glnlsdas.lct @SQLGL:patch/115/import/US/glsupdas.ldt -.

  Connecting to applications... Successfully connected.

  Call the function FNDLOAD.

  Returned by the function FNDLOAD.

  Log file: /fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log/US_glsupdas_ldt.log

  FNDLOAD of error function call.

  When the worker has no time: Wednesday, August 7, 2013 10:36:14

  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

  drix10: / fmstop/r12apps/apps/apps_st/appl/admin/FMSTEST/log > tail-20 US_glsupdas_ldt.log

  Current system time is sea Aug 7 10:36:14 2013

  Download from data file /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt

  Changing environment NLS_LANGUAGE AMERICA database

  Dumping from the LCT/LDT files (/ fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/glnlsdas.lct(120.0), fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt) to the staging tables

  Dumping file fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/glnlsdas.lct(120.0 LCT) in FND_SEED_STAGE_CONFIG

  Dumping LDT file /fmstop/r12apps/apps/apps_st/appl/gl/12.0.0/patch/115/import/US/glsupdas.ldt in FND_SEED_STAGE_ENTITY

  Dumped the lot (GL_DEFAS_ACCESS_SETS SUPER_USER_DEFAS, GL_DEFAS_ACCESS_SETS SUPER_USER_DEFAS) in FND_SEED_STAGE_ENTITY

  Download of the staging tables

  Error loading of seeds for GL_DEFAS_ACCESS_SETS data: DEFINITION_ACCESS_SET = SUPER_USER_DEFAS, ORA-06508: PL/SQL: called program unit is not found

  Simultaneous request ended

  Current system time is sea Aug 7 10:36:14 2013

  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

  Hello

  Please, recreate the specification and body of the respective package and try:

  -Navigate to $GL_TOP, patch, 115, sql

  -Connected as a user of the applications.

  sqlplus Oracle@Amazon sql apps]

  SQL * more: version 10.1.0.5.0 - Production Wed Aug 7 13:53:33 2013

  Copyright (c) 1982, 2005, Oracle.  All rights reserved.

  Enter the password:

  Connected to:

  Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > @glistdas.pls

  Addition of PL/SQL package for gl_defas_access_sets_pkg specifications

  Package created.

  Validation complete.

  ...

  ..

  SQL > @glistdab.pls

  Addition of the PL/SQL package for gl_defas_access_sets_pkg body

  Package body created.

  Validation complete.

  See if this helps you, validation of the object.

  Better subject.

• Cannot download update KB973593, KB973704, KB976416 and KB974561. Installation of the updates fail - getting error 646. Is there a fix for these updates?

  Have not been able to install recent updates. Get a code error and notice 646. Cannot download update KB973593, KB973704, KB976416 and KB974561.

  Hello

  Make sure you have need of updates (in fact have are programs) and if not control panel - Windows
  Updates - click right on and HIDE.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Office automatic however, patch cumulative for Activex killbitts for windows XP (KB2736233) has failed. error code is 0 x 80070017

  During an office automatic however, patch cumulative for Activex killbitts for windows XP (KB2736233) has failed.   error code is 0 x 80070017... How to fix this?     He tells me that the installation failed, and when I close it, it asks me to install the update even.   Thanks in advance for the help.

  Hello

  1. have you made changes on the computer recently?

  2. What is the security software installed on the computer?

  3. are you able to install some other updates?

  4 is that the problem is specific to this update?

  I suggest you to follow the steps in this article and I would like to know the status.

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: '0 x 80070017': http://support.microsoft.com/kb/956704

  Important: While performing the check disk on the hard disk, if bad sectors are, check the drive will try to repair this sector. All the data available in this area may be lost.

  I hope this helps.