Patch # 9858539 R12 database questions

Similar Questions

• Patch 20133080:R12. PO. Compatible with 12.1.3 D

  Hi, we encounter the Bug 20133080, which cancels the PR line if the PO line is cancelled.

  Our EBS is 12.1.3, but it patch 20133080 : R12. PO. D stated that he belonged to the 12.2.3.

  However, while they inspected the patch details (https://updates.oracle.com/Orion/Services/download?type=readme & 18420063 = aru) README file:

  For 12.0.X / 12.1.X / patches of pre-upgrade (with adpatch), you must stop all services in the Application tier before performing the tasks in this section.

  so this means that it is also compatible with 12.1.3? It's the kind of confusion.

  If it's not compatible, is there a patch for 12.1.3?

  If it isn't there a patch for 12.1.3, where I apply a patch?

  I connected an SR to MOSC asks the same questions, but they did not really give me a definitive answer.

  Thank you!

  Hi all!

  Oracle has managed to create a patch for 12.1.3. (20133080:R12 number of patch. PO. B).

  I hope this helps!

• forms cannot be opened after patched QSP R12

  Hi all
  
  Please help on below question.
  
  forms cannot be opened after patched QSP R12.
  all services are up and runnin.
  
  E - biz: 12.0.6
  DB: 11.2.0.2
  
  Thanks in advance.
  
  
  Concerning
  Kumar

  Hi Kumar,

  Caused by: oracle.classloader.util.AnnotatedClassNotFoundException

  Please compile JSP files manually according to the guidelines of these documents and then check.

  Blank Page Accessing R12 - ' lack of class: _RF' in OACore application.log [467562.1 ID]
  R12 - logon does not work, no error message is displayed [435550.1 ID]
  Oracle Application Server diagnostic tools and logs in Applications Release 12 [454178.1 ID] - compiled JSP files are deleted or corrupted

  Thank you
  Hussein

• How to determine the level of Group of patches for the database Oracle EBS Server?

  Dear
  How findout patches for the database server Oracle EBS group level i.e. 10.2.0.3?
  
  Concerning

  Dear Suzy,

  I was looking for a patch of database being upgraded. After the database owner (enviroment) to supply file, I used the following command from $ORACLE_RDBMS_HOME/OPatch directory, command like $ OPatch lsinventory, he listed all the patches and updated patch also.

  'OPatch lsinventory' must list all patches applied to $RDBMS_ORACLE_HOME. For the level of database of the Group of hotfixes, you can use one of the instructions above to get the version. In addition, you can check to the BONE by running executable files (i.e. sqlplus, impdb... etc).

  And on request, I used-> -use $AD_TOP/sql/adutconf.sql , it is perfectly correct.

  Ok.

  But I can't go through of OAM,-diagnostics of Applications using, you can guide me. When I select plan of the site-diagnosis & repair - run diagnostic tests, it error. Say year error has occurred!
  Please note: you don't have sufficient privileges to perform this function.

  OAM and Diagnostics Applications are two different things.

  Diagnostics of applications can be run from "Oracle Diagnostic Tool".

  Note: 358831,1 - E-Business Suite Diagnostics run Instructions
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=358831.1

  Note: 167000.1 - Installation Guide for E-Business Suite Diagnostics
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=167000.1

  For the Group of hotfixes in OAM, follow the steps described in the following note:

  Note: 550654.1 - how to get patches Oracle Applications products in R12 group level
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=550654.1

  Kind regards
  Hussein

• Another application on the ebs r12 database

  Hello

  I would like to know if I can create another user on the ebs r12 database.

  That's another application (not ebs).

  What are the risks?

  Is there an id doc on this subject?

  Thank you.

  
  

  It may not be available for that Oracle doc. But as a principle, why the unrelated database schema is created in the EBS database. This will add more load on the database of EBS, administrative effort. Let's say that your EBS database is down for maintenance, while the other application accessing this scheme does not require maintenance always, it will be down.

  concerning

  Pravin

• Patch in R12.2.0 procedures

  Dear all,

  I'm new to the R12.2.0, please guide me patch procedures and how to apply the patch in R12.2.0 because there are different phases in R12.2.0 while the multiple patch how do I start and finish sessions of patch.

  Please guide me.

  Concerning

  Kumar

  Please see:

  ADOPTION

  https://oracleus.activeevents.com/2013/connect/FileDownload/session/65BBC605E8A0341BCF7C52660766FFDD/CON8432_Hudson-OOW2013_OnlinePatching.pptx

  Online marking

  http://www.Oracle.com/pls/ebs122/search?word=online+patching&format=ranked&remark=quick_search

  Thank you

  Hussein

• 11i to R12 upgrade: impossible to merge the patch 9179588:R12. AD. B with 9477107:R12. AD. 7461070:R12 B and patch. AD. B.1

  Hello Sir,

  According to the readme for Patch 9179588 , I'm trying to merge the patch (9179588:R12. AD. (B) with 9477107:R12. AD. B and R12. AD. B.1

  ()7461070 fix). When I run admrgpch without the option - admode, admrgpch succeeds.

  However, when I just add option - admode in the same command, get the error this invalid "-s" option To please see below the details and suggest as there Note: this merger should be a full merger with - admode.

  
  +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

  drix10: / fmstop/patches/R1211AD/fusion > ls - lrt

  13992 total

  -rw - r - r - 1 appltest s/n 7035668 03 August at 10:59 p7461070_R12_AIX64 - 5L .zip

  -rw - r - r - 1 appltest 79016 04 August at 03:48 p9179588_R12 dba. AD. B_R12_GENERIC.zip

  -rw - r - r - 1 appltest 38579 04 August to 05:22 p9477107_R12 dba. AD. B_R12_GENERIC.zip

  -rw - r - r - 1 appltest s/n 94 04 August 13:27 manifest.txt

  drix10: / fmstop/patches/R1211AD/fusion > cat manifest.txt

  p7461070_R12_AIX64 - 5L .zip

  p9179588_R12. AD. B_R12_GENERIC.zip

  p9477107_R12. AD. B_R12_GENERIC.zip

  drix10: / fmstop/patches/R1211AD/fusion >

  drix10: / fmstop/patches/R1211AD/fusion > admrgpch - admode s/fmstop/patches/R1211AD/merge/fmstop/patches/R1211AD/merge-merge_name d merged_R12AD11-manifest manifest.txt

  Error: Invalid Option: s

  use: admrgpch-help

  admrgpch < repertoire_source > < repertoire_destination >

  admrgpch s < repertoire_source > < repertoire_destination > d

  [-> level < detailed] [- merge_name < model >]

  [- manifest < Filename >] [- logfile < Filename >]

  where

  * - help Print message.

  * - < level > detailed can be: {0 (SILENT),

  1 (quiet), 2 (VERBOSE) or 3 (LOUD)}

  Default is-1 (QUIET).

  * - merge_name < model > the name of the merged patch (up to 24 characters).

  Default - "merged".

  * - s < repertoire_source > path of the source directory where all the patches to be

  merged have been decompressed.

  * d < repertoire_destination > path of the destination directory where the merger

  patch will be created.

  * - manifest < Filename > full path of a file that contains the list of

  patch to merge zip files.

  the name of the logfile - logfile < Filename > Admrgpch.

  Default: "" < CWD > / admrgpch.log "."

  
  +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

  Without the option - admode:

  drix10: / fmstop/patches/R1211AD/fusion > admrgpch s/fmstop/patches/R1211AD/merge/fmstop/patches/R1211AD/merge-merge_name d merged_R12AD11-manifest manifest.txt

  decompression p7461070_R12_AIX64 - 5L .zip...

  p9179588_R12 decompression. AD. B_R12_GENERIC.zip...

  p9477107_R12 decompression. AD. B_R12_GENERIC.zip...

  Execution of the merger of pilots patch

  -Corrective treatment: / fmstop/patches/R1211AD/merge/7461070

  -Treatment did patch: / fmstop/patches/R1211AD/merge/7461070

  -Corrective treatment: / fmstop/patches/R1211AD/merge/9179588

  -Treatment did patch: / fmstop/patches/R1211AD/merge/9179588

  -Corrective treatment: / fmstop/patches/R1211AD/merge/9477107

  -Treatment did patch: / fmstop/patches/R1211AD/merge/9477107

  Copying files...

  all 5%. Files copied from 44 876...

  all the 10%. Files copied from 88 of 876...

  all the 15%. Files copied from 132 of 876...

  all the 20%. Files copied from 176 of 876...

  all the 25%. Files copied from 219 876...

  all the 30%. Files copied from 876 263...

  all 35%. Files copied from 876 307...

  all 40%. Copied the files of 876 351...

  all 45%. Files copied from 395 876...

  all 50%. Files copied from 438 of 876...

  all 55%. Files copied from 876 482...

  all 60%. Files copied from 876 526...

  all the 65%. Files copied from 876 570...

  all 70%. Copied 614 876 records...

  all the 75%. Copied 657 876 files...

  80% finished. Copied 701 876 files...

  85% full. Files copied from 876 745...

  90% full. Copied 789 876 files...

  95% full. Files copied from 833 876...

  100% full. Copying files from 876 876...

  Character file conversion set...

  3 unified drivers merged.

  Patch merger completed successfully

  Please check the log file in. / admrgpch.log.

  +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

  I will carry out admrgpch after that supply 11i environment and the version of admrgpch is:

  drix10:/fmstop/fmstest/fmstestappl/ad/11.5.0/bin > adident Header admerge.pl

  admerge.pl:

  $Header admerge.pl 115.22 nissubra noship 18/09/2008-12:12:08 $

  You must use the binary of R12 to perform the merge, not files binary 11i

  Srini

• patching in R12

  Hello
  
  I need to apply a patch. The patch says that it is compatible with (R12. BY. B, R12.HR_PF. B, 12.1.0, 12.1.1).
  I'm on 12.1.1. and my current patch_level is R12. BY. B.1
  
  I'm looking for on what (PF) I'm on. In 11i we is to use decode function by corresponding patch number.
  
  Concerning
  Taher

  Hello

  These are the patches you need to ask:

  Patch 7446767 - R12.HR_PF. B.Delta.1
  Patch 8337373 - R12.HR_PF. B.Delta.2

  Or, run patchsets.sh as suggested before.

  Kind regards
  Hussein

• Patch 6395242:R12. ABDELLAH. A &lt; and &gt; Patch 6660278:R12. ABDELLAH. A

  Hi hussein.
  
  Our functional consultant (beginning of) hit an error... related or similar to the Doc: 554168.1
  The doc recommend to apply Patch 6395242 : R12. ABDELLAH. Followed by Patch 6660278: R12. ABDELLAH. For 12.0.3.
  
  But our EBS R12 is already in RUP6, are the two patches above still needed? or not included in the RUP6?
  
  
  Thank you very much

  Hello

  It's a patch of cash management, so it should be under $CE_TOP

  You can see the driver patch also find this info. Search the driver patch file and see where to copy files adpatch, or just use the find command.

  Kind regards
  Hussein

• How do I check the applied patches - EBS R12.2.4

  Hi all

  EBS R12.2.4

  OEL 6

  We have layers applications (appluat) and db (orauat) on different servers, or nodes.

  We applied a lot of tasks on the layer of apps. But I don't know if it has updates on the database tables.

  Then, the application server crashed and restore the backup that is older than a month.

  How do I know what patches have been applied in the original level of apps? Can we check the ad_bugs or the ad_applied_patches for re-mapping audit?

  Thank you very much

  JC

  Hello

  See the table in the ad_applied_patches and re-apply all patches since the accident.

  Kind regards

  Bashar

• adoption of Patching EBS R12.2 error

  Hi all

  EBS R12.2.4

  RHEL6.6

  phase of adoption $ [appcrp@ip-10-0-0-216 MobileApps] = apply patches = 20049473 patchtop = / u01/MobileApps

  Enter the password for APPS:

  Enter the password:

  Enter the password for WLSADMIN:

  Please wait. Validating credentials...

  RUN the file system context: /u01/appcrp/CRP/fs1/inst/apps/CRP_ip-10-0-0-216/appl/admin/CRP_ip-10-0-0-216.xml

  Context file system PATCH file: /u01/appcrp/CRP/fs2/inst/apps/CRP_ip-10-0-0-216/appl/admin/CRP_ip-10-0-0-216.xml

  Run the SYSTEM command: / u01/appcrp/CRP/fs2 df

  Determination of worker of County...

  Successful validation. All are called nodes are listed in the table ADOP_VALID_NODES.

  [EVENT]     [EARLY 2015/03/20 19:29] Mental health of high-performance database controls

  [EVENT]     [END 2015/03/20 19:29] Completed the database sanity checks

  [UNEXPECTED] Apply the phase cannot be performed in a fixed cycle, i.e. after prepare phase.

  Log file: /u01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log

  [STATEMENT] Run adopscanlog utility, by using the command

  "adopscanlog-latest = yes".

  for a list of the log files as well as the snippet corresponding to each log file error message.

  adopted out with status = 2 (failure)

  [appcrp@ip-10-0-0-216 MobileApps] $ adopscanlog-latest = yes

  Analyzing the log u01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log file...

  /U01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log:

  ----------------------------------------------------------------

  #(27-31) lines:

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Staging of the current session

  [PROCEDURE] [END 2015/03/20 19:29:01] Staging of the current session

  [UNEXPECTED] Apply the phase cannot be performed in a fixed cycle, i.e. after prepare phase.

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Unlock sessions table

  [STATEMENT] Unlock ad_adop_sessions table for ip-10-0-0-216 with wait 60 seconds interval and number of tent 2

  =============

  [ec2-user@ip-10-0-0-216 ~] $ vi /u01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log

  Log file: /u01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log

  [EARLY 2015/03/20 19:28:40] Arguments passed to adoption

  phase = patch = 20049473 patchtop = / u01/MobileApps

  [END 2015/03/20 19:28:40] Arguments passed to adoption

  [EARLY 2015/03/20 19:28:40] Check the settings

  [END 2015/03/20 19:28:58] Check the settings

  [STATEMENT] Sourcing of the editing of run environment: /u01/appcrp/CRP/fs1/EBSapps/appl/APPSCRP_ip-10-0-0-216.env

  [EVENT]     [EARLY 2015/03/20 19:28:59] Verification of the requirements of ENV

  [EVENT]     [END 2015/03/20 19:29] Verification of the requirements of ENV

  [STATEMENT]  With the help of 4 workers (default: 4, recommended maximum limit: 62)

  [PROCEDURE] [EARLY 2015/03/20 19:29] Determine the admin node

  [STATEMENT] Node admin: "ip-10-0-0-216.

  [PROCEDURE] [END 2015/03/20 19:29] Determine the admin node

  Successful validation. All are called nodes are listed in the table ADOP_VALID_NODES.

  [EVENT]     [EARLY 2015/03/20 19:29] Mental health of high-performance database controls

  [EVENT]     [END 2015/03/20 19:29] Completed the database sanity checks

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Acquisition of a lock on the sessions table

  [STATEMENT] Locking ad_adop_sessions table for ip-10-0-0-216 with wait 60 seconds interval and the number of tent 2

  [PROCEDURE] [END 2015/03/20 19:29:01] Acquisition of a lock on the sessions table

  [EVENT]     [EARLY 2015/03/20 19:29:01] Check that the waiting for sessions

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Control assets /hotpatch session

  [STATEMENT] Fetch the number of incomplete cycles for ip-10-0-0-216 with appltop_id = 195.

  [STATEMENT] value of incomplete_session: "0".

  [PROCEDURE] [END 2015/03/20 19:29:01] Control assets /hotpatch session

  [STATEMENT] Master Session ID: UNDEFINED

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Staging of the current session

  [PROCEDURE] [END 2015/03/20 19:29:01] Staging of the current session

  [UNEXPECTED] Apply the phase cannot be performed in a fixed cycle, i.e. after prepare phase.

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Unlock sessions table

  [STATEMENT] Unlock ad_adop_sessions table for ip-10-0-0-216 with wait 60 seconds interval and number of tent 2

  [PROCEDURE] [END 2015/03/20 19:29:01] Unlock sessions table

  
  

  ==============

  
  

  [appcrp@ip-10-0-0-216 ~] $ adop-status

  Enter the password for APPS:

  Current patch ID of Session: 3

  Name of node node Type Phase status started completed elapsed

  --------------- --------------- --------------- --------------- ------------------------------ ------------------------------ ------------

  CRP2 slave FS_CLONE COMPLETED 5 November 14 03:59:33 - 04:00 November 5, 14 04:54:56 - 04:00 0:55:23

  PREPARE NOT APPLICABLE

  APPLY NOT APPLICABLE

  COMMISSIONING DON'T IS NOT APPLICABLE

  CLEANING DON'T IS NOT APPLICABLE

  Folder synchronization system used in this Patching Cycle: full

  For more information, run ADOPTION Status Report using - option detail

  Generating the ADOPTION status report to the location: /u01/appcrp/CRP/fs_ne/EBSapps/log/status_20150320_194359/adzdshowstatus.out

  Please wait...

  Done...!

  Please see

  ORA-20001: unable to set editing ORA-06512: has the jump "APPS.ad_zd" job: egosdaci.sql on the appsad_zd build (Doc ID 1989739.1)

  https://support.Oracle.com/epmos/faces/PatchDetail?RequestId=18488991&_afrLoop=191137541272365&patchId=20183051%3AR12.ego.D&_afrWindowMode=0&_adf.CTRL-State=5jicoeb2j_165

  AppsMAsti
  sharing is caring

• Installation of patches on R12.2.0 Oracle Home (10.1.2)

  Hello:

  
  

  I'm being upgraded from R12.2.0 to R12.2.3 as an accessory I do a request ID Note: Oracle E-Business Suite Release 12.2: consolidated list of patches and bugfixes of technology (Doc ID 1594274.1), by this Note ID article 3.1 fixes apply to forms and reports for 10.1.2.3 ORACLE_HOME. 

  
  

  According to the instructions of the Note that I downloaded the patches for the version 32-bit and ready to install the patches before installing the patches I have couple of question.

  
  

  1. should I install the patches using 32 or 64 bit opatch utility?

  
  

  2. should I install the patches on both "fs1" & 'fs2' file system?

  
  

  Please answer these questions to continue the upgrade process.

  
  

  Thanks in advance.

  
  

  Syed,
  

  
  

  Syed,

  1. use opatch less 10.1.2.3 $ORACLE_HOME to apply these patches - see MOS Doc below for more details

  2 enforce FS - Oracle E - Business Suite 12.2 patch components Technology Guide (Doc ID 1355068.1)

  Thank you

  Hussein

• oratab for R12 database 11g on Linux

  Hello:

  This 11.2.0.3 on Linux database is migrated to HP - UX. I was checking oratab under/etc (on Linux), but he has no lines. Instead, / var/opt/oracle/oratab has this saved SID. Would you please answer my questions below:

  I would add that SID to the/etc/oratab?
  How is it his work always with/etc/oratab vacuum?
  Why is/var/opt/oracle (on Linux)? I didn't copy this to the target (Linux).

  Thanks and regards.

  On Solaris, there "/ var/opt/oracle/oratab.

  On other operating systems, it is ' / etc/oratab.

  The oratab file contains lines similar to the following, which are used to identify the SID and the directory corresponding Oracle for each database or the Automatic Storage Management instance on the system:

  SID: oracle_home_directory: [Y |] N]

  Stop and start the Oracle software

  I would add that SID to the/etc/oratab?

  Yes.

  How is it his work always with/etc/oratab vacuum?

  The database would normally work if the entry is missing or corrupted. However, if you try to patch/upgrade to level the instance he complains of the missing entry.

  Why is/var/opt/oracle (on Linux)? I didn't copy this to the target (Linux).

  Check the timestamp of the file, maybe it was edited/modified by someone else?

  Thank you

  Hussein

• Patching independently two databases

  Dear Group, asked me to install Oracle 9i R2 on a Windows 2003 server, my boss told me that she needs two databases, it must be connected to the Channel 9.2.0.6 and other need to be patched to 9.2.0.8, I just installed the first database 9.2.0.1.
  
  My question is, if I create two databases on the same oracle_home (same facility) they can be corrected independently?
  
  Or
  
  I need to make another installation on another Oracle_Home.
  
  Thank you.
  
  If any questions please don't you have the number of patches Oracle 9i Release 9.2.0.1 upgrade to 9.2.0.X?
  
  Thank you very much.

  Hello

  The different HOUSES of ORACLE user.

  -Pavan Kumar N

• How patch oracle dataguard database under windows

  Hi friends,

  I need to update a database of Oracle 11 g Dataguard on Windows 8 Pro x 64 with the latest Patch critical update available for this configuration. I read that there is a CPU 20833831 (July 2015).

  What documents Oracle I pay to play? or what are the steps I need to follow? Or what is the best way to accomplish this task?

  Details of PRIMARY database:

  SQL > select * from v version $;

  BANNER

  --------------------------------------------------------------------------------

  Oracle Database 11g Release 11.2.0.4.0 - Production personnel

  PL/SQL Release 11.2.0.4.0 - Production

  CORE Production 11.2.0.4.0

  AMT for 32-bit Windows: Version 11.2.0.4.0 - Production

  NLSRTL Version 11.2.0.4.0 - Production

  SQL > SELECT * FROM history of registry of $;

  ACTION_TIME ACTION NAMESPACE VERSION ID COMMENTS BUNDLE_SERIES

  ---------------------------- ------------------------- ------------ ---------- ---------- ----------------------------------- -----

  08/07/14 21:59:26, 422000 APPLY SERVER 11.2.0.4 WinBundle 4 11.2.0.4.4 PSU

  SQL >

  C:\app\product\11.2.0\dbhome_1\OPatch > lsinventory opatch

  Installer of temporal parchment of Oracle versi¾n 11.2.0.3.6

  Copyright (c) 2013, Oracle Corporation. All rights reserved.

  Oracle home: C:\app\product\112~1.0\dbhome_1

  The central inventory: C:\Program Files (x 86) \Oracle\Inventory

  from: n/a

  OPatch version: 11.2.0.3.6

  YES version: 11.2.0.4.0

  Location of the log file: C:\app\product\112~1.0\dbhome_1\cfgtoollogs\opatch\opatch2015-09-06_19-54-29PM_1.log

  Location of the output file Lsinventory: C:\app\product\112~1.0\dbhome_1\cfgtoollogs\opatch\lsinv\lsinventory2015-09-06_19-54-29PM

  --------------------------------------------------------------------------------

  Nivel superior instalados products (1):

  Oracle Database 11g 11.2.0.4.0

  Hay 1 productos instalados in este directory Rayz of Oracle.

  Sears temporal (1):

  Patch 18296644: applied on Thu Aug 07 18:48:26 COT 2014

  Patch ID: 17560341

  Patch description: "WINDOWS DB BUNDLE . 11.2 PATCH " . 0.4.4: (18296644)"

  Created April 22, 2014, 02:01:38 hours

  Bugs fixed:

  16809786, 17716305, 16180763, 17545847, 17597748, 16992075, 17610798

  18235390, 17446237, 16450169, 16731148, 17761775, 14602788, 17726838

  17441661, 17050888, 17622427, 17546761, 13866822, 16315398, 17215306

  17040764, 14010183, 16837842, 16228604, 17346671, 18084625, 16683112

  14133975, 17721717, 17602269, 16777840, 17577218, 17071721, 16929165

  18241194, 17080436, 17265217, 17036973, 16698971, 4189542, 14852021

  16399083, 13609098, 17493764, 16785708, 17987366, 16187992, 17781991

  17313525, 16833527, 16618694, 17741995, 11733603, 14285317, 17341326

  16491477, 17357979, 17344412, 17088068, 17332800, 13498243, 16850630

  17783588, 14580303, 16296213, 18223971, 17393683, 18069285, 16863422

  16069901, 17443671, 17897511, 18296644, 17389192, 17394950, 10136473

  17785632, 14458214, 18069723, 17397545, 17186905, 17325413, 13364795

  16472716, 17468141, 13944971, 17883081, 16721594, 13853126, 18088509

  17205719, 16849620, 17284817, 17239687, 17079301, 18180390, 16976121

  17235750, 17951124, 17564992, 17754782, 17082359, 16314254, 17478145

  18154779, 18160822, 16613964, 17174582, 16043574, 17865671, 16943711

  18232462, 17612828, 17375354, 17393915, 17571306, 16825679, 18230522

  17546973, 17209410, 16633319, 16956380, 13077335, 16470836, 18328509

  12905058, 17921190, 17799716, 17614227, 18094246, 18018515, 18034871

  17672719, 16912439, 17385178, 16394467, 16220077, 17016369, 18115594

  17501491, 17027426, 17591148, 16875449, 17465741, 17752121, 17892268

  17614134, 14829250, 17288409, 17296856, 16285691, 17390431, 14338435, 17323222

  --------------------------------------------------------------------------------

  OPatch succeeded.

  Best regards

  dbape.

  What documents Oracle I pay to play? or what are the steps I need to follow? Or what is the best way to accomplish this task?

  1 doc oracle suggest to talk about the 'Readme file' patch... remember this is a basic step that you do.

  2. go to read me and follow the steps of which has suggested correction doc. Nobody does something special on the benches.

  -KumarN pavan