patch applTier in ebs R12 RAC environment.

Similar Questions

• Need help on design for 2 EBS with RAC environment

  Hi all

  We currently have 4 servers with 256 GB of RAM, 1 TB HDD and 8 cores. Our requirement is to configure two EBS 12.1.3 with DB RAC environment. We want to take advantage of these 4 server to accommodate the two EBS since the configuration of the server (application server 2 with HA and 2 DB for RAC servers) are quite high, because the concurrent users on each EBS are not more than 200.

  So our problem is as below:

  Say we have these server 4A, B, C and D. We have 1 create multi instance node, with DB on server A & B (CARS) and application on the server C & D. Now if we want to install the second case, with the same architecture on the same servers that we do.

  (1) use the same grid infrastructure and create DB for 2nd instance cluster even. (how?)

  (2) install another grid infrastructure and create totally another cluster for this instance.

  You can do the following for a case of BSE, and perform similar operations for a 2nd on the same grid. Check after the link. He detailed information EBS on RAC Setup

  Install EBS R12 on 11g RAC Oracle ASM

  
  

  High level steps are:

  
  

  • Install and Configure Grid Infrastructure on cluster 2 nodes.
  • Create the DATA starts EAM and FRA with a sufficient size.
  • Install theSoftware to the database of this Cluster Homeon.
  • Install the EBS by using a quick installation on the database node 1 (out of the BOX Non-RAC on 1 node installation
  • Install BSE using rapid installation on nodes of applications.
  • Convert the database of 11 GR 1 material not RAC RAC Database.

• How do I abort or kill or cancel suspended adoption patch run? (EBS R12.2.4)

  Hi all

  EBS R12.2.4

  OEL 6.5

  Check patches (adoption-status) without previous state, I applied a fix to help:

  phase of adoption $ = patch = 20059164 patchtop = / home/applcrp2/patch_for_application

  But I got the following error:

  Successful validation. All are called nodes are listed in the table ADOP_VALID_NODES.

  [EVENT]     [EARLY 2015/05/25 15:28:41] Mental health of high-performance database controls

  [EVENT]     [END 2015/05/25 15:28:41] Completed the database sanity checks

  [UNEXPECTED] Apply the phase cannot be performed in a fixed cycle, i.e. after prepare phase.

  Log file: /home/applcrp2/CRP2/fs_ne/EBSapps/log/adop/adop_20150525_152806.log

  [STATEMENT] Run adopscanlog utility, by using the command

  "adopscanlog-latest = yes".

  for a list of the log files as well as the snippet corresponding to each log file error message.

  adopted out with status = 2 (failure)

  
  

  I tried to run adoption-status and I discovered that there was previous patch hanging series

  How do I kill/clear/demolition and clean up the patch suspended?

  $ adop-status

  Enter the password for APPS:

  Current patch ID of Session: 7

  Name of node node Type Phase status started completed elapsed

  --------------- --------------- --------------- --------------- ------------------------------ ------------------------------ ------------

  Master CRP2 PREPARE NOT APPLICABLE

  APPLY ASSETS 23 MARCH 15 13:15:35 + 08:00

  FINALIZE NOT APPLICABLE

  COMMISSIONING DON'T IS NOT APPLICABLE

  CLEANING NOT STARTED

  Folder synchronization system used in this Patching Cycle: None

  For more information, run ADOPTION Status Report using - option detail

  Generating the ADOPTION status report to the location: /home/applcrp2/CRP2/fs_ne/EBSapps/log/status_20150525_153549/adzdshowstatus.out

  Please wait...

  Done...!

  Help, please...

  Thank you very much

  MK

  Lol demolition Phase is not necessary.

  Don't run cleaning or if you want to apply another /hotpatch so you can continue with the current adoption session.

• ASIC can run on the same server/db like EBS (R12.1)

  Hello

  We have an EBS (R12.1) environment and intend to use the CPSA. I've seen environments where the CAWC runs in its own environment/database, etc. and connects to an instance of the EBS. Which is the only type of available configuration or can CAWC run fully within an environment of EBS/instance on the same server? If so, what are the consequences of such a configuration, for example on the performance.

  Thank you

  NAT.

  Hi Nat,

  ASIC can be configured in two ways:

  1 centralized - where the EBS and VCP reside on the same application server.

  2 decentralized - where the EBS and CRS are on two different application servers.

  Basically the motor nucleus of CPSA of planning does all the planning in the memory of the application server (and not in the database). This planning process is highly require a lot of resources (memory) and requires a huge memory (according to the data, the type of plan and many other factors). If the application servers are not the right size, this led to the poor performance of the application. And if both the planning and EBS reside on the same server, there are possibilities that you slow the global treatment through the functions of the company. That's why decentralized architecture is preferred, where the planning process running on another remote computer of your EBS and it didn't there in not affecting transactional modules.

  Beyond that, you have the ease of maintenance in terms of correction, update, addition of multiple of VCP modules, if you're on a decentralised architecture.

  Centralized architecture is also not rare. Many companies run their planning and EBS on a single machine.

  I hope that the above gives you a point of view, using which you can choose what suits your business best!

  Kind regards

  Mohan Balaji

• adoption of Patching EBS R12.2 error

  Hi all

  EBS R12.2.4

  RHEL6.6

  phase of adoption $ [appcrp@ip-10-0-0-216 MobileApps] = apply patches = 20049473 patchtop = / u01/MobileApps

  Enter the password for APPS:

  Enter the password:

  Enter the password for WLSADMIN:

  Please wait. Validating credentials...

  RUN the file system context: /u01/appcrp/CRP/fs1/inst/apps/CRP_ip-10-0-0-216/appl/admin/CRP_ip-10-0-0-216.xml

  Context file system PATCH file: /u01/appcrp/CRP/fs2/inst/apps/CRP_ip-10-0-0-216/appl/admin/CRP_ip-10-0-0-216.xml

  Run the SYSTEM command: / u01/appcrp/CRP/fs2 df

  Determination of worker of County...

  Successful validation. All are called nodes are listed in the table ADOP_VALID_NODES.

  [EVENT]     [EARLY 2015/03/20 19:29] Mental health of high-performance database controls

  [EVENT]     [END 2015/03/20 19:29] Completed the database sanity checks

  [UNEXPECTED] Apply the phase cannot be performed in a fixed cycle, i.e. after prepare phase.

  Log file: /u01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log

  [STATEMENT] Run adopscanlog utility, by using the command

  "adopscanlog-latest = yes".

  for a list of the log files as well as the snippet corresponding to each log file error message.

  adopted out with status = 2 (failure)

  [appcrp@ip-10-0-0-216 MobileApps] $ adopscanlog-latest = yes

  Analyzing the log u01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log file...

  /U01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log:

  ----------------------------------------------------------------

  #(27-31) lines:

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Staging of the current session

  [PROCEDURE] [END 2015/03/20 19:29:01] Staging of the current session

  [UNEXPECTED] Apply the phase cannot be performed in a fixed cycle, i.e. after prepare phase.

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Unlock sessions table

  [STATEMENT] Unlock ad_adop_sessions table for ip-10-0-0-216 with wait 60 seconds interval and number of tent 2

  =============

  [ec2-user@ip-10-0-0-216 ~] $ vi /u01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log

  Log file: /u01/appcrp/CRP/fs_ne/EBSapps/log/adop/adop_20150320_192839.log

  [EARLY 2015/03/20 19:28:40] Arguments passed to adoption

  phase = patch = 20049473 patchtop = / u01/MobileApps

  [END 2015/03/20 19:28:40] Arguments passed to adoption

  [EARLY 2015/03/20 19:28:40] Check the settings

  [END 2015/03/20 19:28:58] Check the settings

  [STATEMENT] Sourcing of the editing of run environment: /u01/appcrp/CRP/fs1/EBSapps/appl/APPSCRP_ip-10-0-0-216.env

  [EVENT]     [EARLY 2015/03/20 19:28:59] Verification of the requirements of ENV

  [EVENT]     [END 2015/03/20 19:29] Verification of the requirements of ENV

  [STATEMENT]  With the help of 4 workers (default: 4, recommended maximum limit: 62)

  [PROCEDURE] [EARLY 2015/03/20 19:29] Determine the admin node

  [STATEMENT] Node admin: "ip-10-0-0-216.

  [PROCEDURE] [END 2015/03/20 19:29] Determine the admin node

  Successful validation. All are called nodes are listed in the table ADOP_VALID_NODES.

  [EVENT]     [EARLY 2015/03/20 19:29] Mental health of high-performance database controls

  [EVENT]     [END 2015/03/20 19:29] Completed the database sanity checks

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Acquisition of a lock on the sessions table

  [STATEMENT] Locking ad_adop_sessions table for ip-10-0-0-216 with wait 60 seconds interval and the number of tent 2

  [PROCEDURE] [END 2015/03/20 19:29:01] Acquisition of a lock on the sessions table

  [EVENT]     [EARLY 2015/03/20 19:29:01] Check that the waiting for sessions

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Control assets /hotpatch session

  [STATEMENT] Fetch the number of incomplete cycles for ip-10-0-0-216 with appltop_id = 195.

  [STATEMENT] value of incomplete_session: "0".

  [PROCEDURE] [END 2015/03/20 19:29:01] Control assets /hotpatch session

  [STATEMENT] Master Session ID: UNDEFINED

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Staging of the current session

  [PROCEDURE] [END 2015/03/20 19:29:01] Staging of the current session

  [UNEXPECTED] Apply the phase cannot be performed in a fixed cycle, i.e. after prepare phase.

  [PROCEDURE] [EARLY 2015/03/20 19:29:01] Unlock sessions table

  [STATEMENT] Unlock ad_adop_sessions table for ip-10-0-0-216 with wait 60 seconds interval and number of tent 2

  [PROCEDURE] [END 2015/03/20 19:29:01] Unlock sessions table

  
  

  ==============

  
  

  [appcrp@ip-10-0-0-216 ~] $ adop-status

  Enter the password for APPS:

  Current patch ID of Session: 3

  Name of node node Type Phase status started completed elapsed

  --------------- --------------- --------------- --------------- ------------------------------ ------------------------------ ------------

  CRP2 slave FS_CLONE COMPLETED 5 November 14 03:59:33 - 04:00 November 5, 14 04:54:56 - 04:00 0:55:23

  PREPARE NOT APPLICABLE

  APPLY NOT APPLICABLE

  COMMISSIONING DON'T IS NOT APPLICABLE

  CLEANING DON'T IS NOT APPLICABLE

  Folder synchronization system used in this Patching Cycle: full

  For more information, run ADOPTION Status Report using - option detail

  Generating the ADOPTION status report to the location: /u01/appcrp/CRP/fs_ne/EBSapps/log/status_20150320_194359/adzdshowstatus.out

  Please wait...

  Done...!

  Please see

  ORA-20001: unable to set editing ORA-06512: has the jump "APPS.ad_zd" job: egosdaci.sql on the appsad_zd build (Doc ID 1989739.1)

  https://support.Oracle.com/epmos/faces/PatchDetail?RequestId=18488991&_afrLoop=191137541272365&patchId=20183051%3AR12.ego.D&_afrWindowMode=0&_adf.CTRL-State=5jicoeb2j_165

  AppsMAsti
  sharing is caring

• Cloning EBS R12.2 run and patch editions

  Hi all

  I noticed that when I do cloning EBS R12.2, I cloned two race and records editions patch (fs1 and fs2) with identical content but different port pool game.

  My question is, because they have different ports, I can start editions both the two? Start or any of them and use alternately?

  Thank you

  MK

  Yes you can start the services of two file systems (use "forcepatchfs" for the patch file system), but users should be accessing the file system to run only. Start services on the patch file system is required for certain tasks that are usually documented (examples, (1375769.1), (1590356.1) and (1530033.1)).

  More details on the RUN/PATCH file systems found in:

  Concepts of Oracle E-Business Suite

  Oracle E-Business Suite Guide interview

  Thank you

  Hussein

• How do I check the applied patches - EBS R12.2.4

  Hi all

  EBS R12.2.4

  OEL 6

  We have layers applications (appluat) and db (orauat) on different servers, or nodes.

  We applied a lot of tasks on the layer of apps. But I don't know if it has updates on the database tables.

  Then, the application server crashed and restore the backup that is older than a month.

  How do I know what patches have been applied in the original level of apps? Can we check the ad_bugs or the ad_applied_patches for re-mapping audit?

  Thank you very much

  JC

  Hello

  See the table in the ad_applied_patches and re-apply all patches since the accident.

  Kind regards

  Bashar

• Packages, patches, required RPM in Oracle Linux 6 for the installation of the EBS R12.

  Hello
  I am not a beginner and I'm doing a vision of Oracle EBS R12 installation on my laptop.
  
  I downloaded the pack of 3 journalists Oracle Enterprise Linux version 6 update of edelivery.com and installed Oracle Linux on Vmware preinstalled.
  Now, I want to know what all the patches, the packaging and the RPM is necessary as a prerequisite before proceeding with the installation of R12.
  How to check if they are already present and how to install them.
  I have referred to the oracle notes but tangled in what points to be followed and that jump.
  
  Please guide.
  
  Thank you
  Patricia

  swapnil_yeole wrote:
  Hello
  I am not a beginner and I'm doing a vision of Oracle EBS R12 installation on my laptop.

  I downloaded the pack of 3 journalists Oracle Enterprise Linux version 6 update of edelivery.com and installed Oracle Linux on Vmware preinstalled.
  Now, I want to know what all the patches, the packaging and the RPM is necessary as a prerequisite before proceeding with the installation of R12.
  How to check if they are already present and how to install them.
  I have referred to the oracle notes but tangled in what points to be followed and that jump.

  Please guide.

  Thank you
  Patricia

  All BONES and RPM packages can be found in these docs.

  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Linux x 86-64 [ID 761566.1]
  Installation of Oracle E-Business Suite and 12 (12.1.1) for Linux x 86 version upgrade Notes [ID 761564.1]

  "Rpm - qa" command to check if the package is installed or not.

  To install the packages, please use "yum install" or 'rpm - Uvh' command.

  Thank you
  Hussein

• Cannot start the database the R12 DR Oracle EBS of RAC 10 g R2 using SRVCTL

  Hello
  
  I've implemented Oracle 10g R2 RAC data DR Guard for main server Oracle 10 g R2 RAC for EBS R12 (12.0.4).
  I followed Note + ' Business Continuity for Oracle Applications Release 12 on Release 10 gr 2 - Single Instance Database and RAC [452056.1 ID]. +.
  After you configure DR DG, I added DR Database to the Configuration of the Cluster. But I'm not able to start the DR Database via SRVCTL. But able to start the DR Database through Sql * more. I have already mentioned Note: + troubleshooting when srvctl cannot start the RAC instance, but sqlplus can start [ID 844272.1] + and tried to solve the problem but without success.
  
  , I opened SR but still, the problem is not resolved. Are there steps I need to do that is not mentioned in Note 452056.1.
  
  Rgds,
  Thiru

  Have you reviewed these docs?

  CRS - 215 srvctl cannot start ASM, listener, %ORACLE_HOME%/bin/ resources RDBMS with error [740319.1 ID]
  Could not start the Instance with Srvctl, no Info in the newspapers of Imon [ID 741212.1]

  Thank you
  Hussein

• Dishes VM for EBS R12.1 RAC

  Hello
  
  I downloaded VMware http://dlm2.vmware.com/software for my RAC configuration tests.
  
  I saw 3 versions: 2.0.0 2.0.1 and 2.0.2. of course, I chose the recent (2.0.2). It is supported by CARS?
  

  VMware-server - 2.0.2 - 203138.exe
  VMware-server - 2.0.2 - 203138.i386.rpm
  VMware-server - 2.0.2 - 203138.x86_64.rpm

  is - it everything I need VMware install EBS R12.1 RAC? or am I choose the right file?
  
  I'm also confused on the other versions of this :(
  

  You can download Workstation 7.1 to http://downloads.vmware.com/d/

  And also:
  

  VMware-player - 3.1.3 - 324285.exe < == Can I also install CARS in it?

  Thank you very much
  
  Mrs. Mina
  
  Published by: Crystal on December 10, 2010 01:17

  Hello

  Get started with VMware server edition,

  This will be enough for you.

  Thank you.

• 11 GR 2 CARS vs.  11 GR 1 material RAC to EBS R12.1

  Hi hussein/helios
  
  
  We have just started creating CARS for 11 GR 1 material - EBS R12.1 where we met a lot of problems :(
  Then here's the client asking for new requirements. Instead of 11 GR 1 material, her force us to upgrade to DB 11 GR 2 and then BECAUSE he huhuhhu
  
  Y at - it notes metalink separated for installation of the EBS R12.1.1 - 11 GR 2 - RAC? agains R12.1.1 EBS - 11 GR 1 RAC matter?
  
  Kindly give me the commentary on this configuration/configuration please...
  
  
  Thank you very much
  
  Ms. K

  Hello

  Refer to the last doc for the GR 11, 1 material doc (doc contains links to all versions of Oracle database that can be configured with R12).

  Thank you
  Hussein

• RAC RAC cloning on ebs R12

  Hi all
  
  We will make the CARS to cloning on ebs R12 db 10 gr 2 10.2.0.4 RAC using this note below.
  
  Compatible with the Rapid Clone Oracle E-Business Suite Release 12 systems CAR cloning
  DOC - ID: 559518.1
  
  If someone has done this before.
  Please share some experiences on this issue.
  
  Thanks in advance!

  Hello

  One of the issues that you may encounter when you do this clone is addressed in the following note:

  Note: 781279.1 - RAC RAC CLONE: IMAGING of DB FAILS IF SUPERIOR SIZE to 2G
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=781279.1

  Other that the above, you should be able to run the clone if you follow the steps described in the note and consider the restrictions.

  Kind regards
  Hussein

• VMware to install RAC for EBS R12

  Hello
  
  I want to test the CARS for EBS R12 installation on vmware. My OS is OEL 5.4
  Can you help me configure vmware please? What prerequisites them?
  
  
  Thank you very much
  
  Ms. K
  
  Published by: user_unlimited on Sep 2, 2010 12:22 AM

  Hi again,

  I want to test the CARS for EBS R12 installation on vmware. My OS is OEL 5.4
  Can you help me configure vmware please? What prerequisites them?

  You can also view links below
  http://www.Oracle-base.com/articles/10G/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
  http://blogs.Sun.com/rajeshthekkadath/entry/oracle_rac_references
  http://communities.VMware.com/thread/199070

  Respect of
  HELIOS

• Cloning of EBS R12.2.4 with system file to run on fs2

  Hi all

  EBS R12.2.4

  RHEL 6.5

  I am cloning our EBS R12.2.4, who has run the file system on fs2.

  Information on the E-Business Suite environment

  ----------------------------------------

  EXECUTION of the file system: / u01/appvis/SCREWS/fs2/EBSapps/appl

  PATCH file system: / u01/appvis/SCREWS/fs1/EBSapps/appl

  Non-Editioned filesystem: / u01/appvis/SCREWS/fs_ne

  
  

  .

  
  

  So I copy the folder >/U01/of/SCREWS/fs2/EBSapps

  
  

  But when he asks the system base directory target, and I come home >/U01/of/SCREWS

  It will automatically be poppulate records succeeding and default to the fs1

  How can I force it points to fs2?
  

  
  

  Target system Base Directory: / U01/of/SCREWS

  Home directory for the defined target system on/U01/of/SCREWS

  The target system value based filesystem screws/U01/of/SCREW/fs1

  The target system value another file system based/u01/appvis/SCREWS/FS2

  Target Fusion Middleware Home screws/U01/of/SCREWS/fs1/FMW_Home system

  The target value system Web Oracle Home screws/U01/of/SCREWS/fs1/FMW_Home/webtier

  The target value system Appl screws/U01/of/SCREWS/fs1/EBSapps/appl

  The target value system COMMON TOP screws/U01/of/SCREWS/fs1/EBSapps/comn

  Target directory system Instance home [screws/U01/of/SCREW]:

  Thank you very much

  JC

  No it should not be modified in TARGET. in the file system TARGET will remain same as source.

  Of course how do not support this approach, but on source to change the file system to run for FS1 and run adpreclone and check.

  No doubt, when you ran adpreclone on the source, which was executed at this time file system. I just wanted to be sure.

  concerning

  Pravin

• Installation failure: EBS R12.2.5 on Windows Server R2 Standard 2012

  Hello

  I install EBS R12.2.5 VISION Instance on Windows Server 2012 R2 Standard, that is certified. I downloaded the media and made the scene and complete the prerequisites.

  I installed it, under Tools before building the stadium and run rapidwiz

  • Microsoft Visual Studio Express 2013 for Windows Desktop ()Doc ID 1330706.1()
  • Cygwin (Doc ID 414992.1( )

  Then build step, all right.

  Checked it the rapidwiz version:

  C:\stager122\startCD\Disk1\rapidwiz > RapidWizVersion.cmd

  Oracle E-Business Suite quick installation wizard

  Version 12.2.0.50

  (c) copyright 2000-2011 Oracle Corporation.  All rights reserved.

  Press a key to continue...

  Then I run the RapidWiz.cmd to install...

  at 29%, I got an error, the error detail is given below:

  C:\Users\ADMINI~1\AppData\Local\Temp > C:\stager122\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java - cp C:\oracle\app\VIS\fs2\inst\apps\VIS_srcebs\temp\ASInstallHome\fnd\... \j11067592_fnd.zip; C:\oracle\app\VIS\fs2\inst\apps\VIS_srcebs\temp\ASInstallHome\fnd\java\3rdparty\stdalone\xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=C:\oracle\app\VIS\fs2\EBSapps\appl\admin\VIS_srcebs\-Doracle.apps.fnd.txk.runtime.config=C:\oracle\app\VIS\fs2\inst\apps\VIS_srcebs\temp\xmldocs\instASpatches.xml oracle.apps.fnd.txk.config.InstallService

  Fatal error: T2K install Service

  oracle.apps.fnd.txk.config.ProcessStateException: FileSys OS COMMAND Failed: out = 3 see the log file for more details. CMD = cmd /c rmdir /s /q C:\\oracle\\app\\VIS\\fs2\\FMW_Home\webtier\OPatch # node = NodeId = 1698 Type = 24 TypeName = filesys_patch_action Name = RefId = State 901 = init ConfigDoc = APPS_OHS_HOME ParentDoc = null topology = R12 Action = os_cmd

  at oracle.apps.fnd.txk.config.FileSysPatchActionNode.doFileSysOSCmd(FileSysPatchActionNode.java:169)

  at oracle.apps.fnd.txk.config.FileSysPatchActionNode.processState(FileSysPatchActionNode.java:101)

  at oracle.apps.fnd.txk.config.PatchActionNode.processState(PatchActionNode.java:187)

  at oracle.apps.fnd.txk.config.PatchNode.processState(PatchNode.java:338)

  at oracle.apps.fnd.txk.config.PatchesNode.processState(PatchesNode.java:79)

  at oracle.apps.fnd.txk.config.InstallNode.processState(InstallNode.java:68)

  at oracle.apps.fnd.txk.config.TXKTopology.traverse(TXKTopology.java:594)

  at oracle.apps.fnd.txk.config.InstallService.doInvoke(InstallService.java:224)

  at oracle.apps.fnd.txk.config.InstallService.invoke(InstallService.java:237)

  at oracle.apps.fnd.txk.config.InstallService.main(InstallService.java:291)

  C:\Users\ADMINI~1\AppData\Local\Temp > if 1 == 0 goto: INSTAS_OK

  C:\Users\ADMINI~1\AppData\Local\Temp > echo cannot install specific patches

  Can not install the unique patches

  RW-50010: error:-script returned an error: 1

  RW-50004: Error Code when you run the external process.  Check the log file for more details.

  APPL_TOP install the driver running for instance SCREWS

  I tried many things, re-download the error also, but always the same media.

  Kindly help me.

  Thank you and best regards,

  Waqas

  With the help of VMWare he can't.

  Using Oracle VM VirtualBox, as successful.