RAC RAC cloning on ebs R12
Hi allWe will make the CARS to cloning on ebs R12 db 10 gr 2 10.2.0.4 RAC using this note below.
Compatible with the Rapid Clone Oracle E-Business Suite Release 12 systems CAR cloning
DOC - ID: 559518.1
If someone has done this before.
Please share some experiences on this issue.
Thanks in advance!
Hello
One of the issues that you may encounter when you do this clone is addressed in the following note:
Note: 781279.1 - RAC RAC CLONE: IMAGING of DB FAILS IF SUPERIOR SIZE to 2G
https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=781279.1
Other that the above, you should be able to run the clone if you follow the steps described in the note and consider the restrictions.
Kind regards
Hussein
Tags: Oracle Applications
Similar Questions
-
Cloning of EBS R12.2.4 with system file to run on fs2
Hi all
EBS R12.2.4
RHEL 6.5
I am cloning our EBS R12.2.4, who has run the file system on fs2.
Information on the E-Business Suite environment
----------------------------------------
EXECUTION of the file system: / u01/appvis/SCREWS/fs2/EBSapps/appl
PATCH file system: / u01/appvis/SCREWS/fs1/EBSapps/appl
Non-Editioned filesystem: / u01/appvis/SCREWS/fs_ne
.
So I copy the folder >/U01/of/SCREWS/fs2/EBSapps
But when he asks the system base directory target, and I come home >/U01/of/SCREWS
It will automatically be poppulate records succeeding and default to the fs1
How can I force it points to fs2?
Target system Base Directory: / U01/of/SCREWS
Home directory for the defined target system on/U01/of/SCREWS
The target system value based filesystem screws/U01/of/SCREW/fs1
The target system value another file system based/u01/appvis/SCREWS/FS2
Target Fusion Middleware Home screws/U01/of/SCREWS/fs1/FMW_Home system
The target value system Web Oracle Home screws/U01/of/SCREWS/fs1/FMW_Home/webtier
The target value system Appl screws/U01/of/SCREWS/fs1/EBSapps/appl
The target value system COMMON TOP screws/U01/of/SCREWS/fs1/EBSapps/comn
Target directory system Instance home [screws/U01/of/SCREW]:
Thank you very much
JC
No it should not be modified in TARGET. in the file system TARGET will remain same as source.
Of course how do not support this approach, but on source to change the file system to run for FS1 and run adpreclone and check.
No doubt, when you ran adpreclone on the source, which was executed at this time file system. I just wanted to be sure.
concerning
Pravin
-
Cloning of EBS R12.2.4
Hi all
EBS R12.2.4
RHEL 6.5
I always get error when cloning time 2 CRP in the same server instance due to duplicate exist in the OraInventory folder.
How to avoid it? My solution is to manually delete the entries in the xml file that is pretty hard to do because you might accidentally delete the wrong pairs of lines.
Can I use the deregistration of control?
For example:
If none of the mentions above Oracle Home are already enrolled in the Oracle inventory, you can run the following command to unregister or detach that Oracle Home:
$ cd /u02/r122/fs1/FMW_Home/oracle_common/oui/bin
$ ./runInstaller -detachhome
\ORACLE_HOME=/s0/r122/at1/FMW_Home/oracle_common
Thank you
Yes. This is the correct procedure.
CD $ORACLE_HOME/Yes/bin
. "/ runInstaller-silent - ORACLE_HOME = detachHome"
"ORACLE_HOME_NAME =" " Take a look on
R12.2: How to create, update or rebuild the inventory Central for Oracle Applications E-Business Suite? (Doc ID 1588609.1)
-
Hi all
EBS R12.2
RHEL 6.6
I am cloning our R12.2 EBS on RHEL 6.6
Inventory global loc = /etc/oraInst.loc
Journal: /u01/oraInventory/logs/install2015-05-23_04-13-51AM.log
contextFile:/u01/appvis/VIS/fs1/EBSapps/comn/clone/prereq/webtier/Scripts/prereq/oui/agent_prereq_context.xml
The entry point is: oracle.installType.all
Check the name: CertifiedVersions
Check the Description: it is a precondition to check whether or not the Oracle software is certified on the current o/s.
Expected result: one of the oracle-6,oracle-5.8,oracle-5.7,oracle-5.6,enterprise-5.4,enterprise-4,enterprise-5,redhat-5.4,redhat-4,redhat-5,SuSE-10,SuSE-11
Actual result: redhat 6, 6
Full version. The result of this review is: failure of < < < <
But it will not pass the validation prior becase RHEL 6.6 is not in the list. How can I add this version?
I know that I have done before, but I forgot the file to edit
Help, please...
Thank you very much
Maria
Hi Bashar and all,
Problem solved by keeping at least a line PACKAGE which is valid or existing
Thank you...
-
Cloning of error EBS R12.1
Hello
EBS R12.1 on OEL 5.4
I am cloning our EBS R12.1, but I got this error:Executing service control script: /u01/applr1211/VIS/inst/apps/VIS_server01/admin/scripts/adoacorectl.sh start script returned: **************************************************** You are running adoacorectl.sh version 120.13 Starting OPMN managed OACORE OC4J instance ... adoacorectl.sh: exiting with status 204 adoacorectl.sh: check the logfile /u01/applr1211/VIS/inst/apps/VIS_server01/logs/appl/admin/log/adoacorectl.txt for more information ... .end std out. .end err out. **************************************************** Executing service control script: /u01/applr1211/VIS/inst/apps/VIS_server01/admin/scripts/adformsctl.sh start script returned: **************************************************** You are running adformsctl.sh version 120.16 Starting OPMN managed FORMS OC4J instance ... adformsctl.sh: exiting with status 204 adformsctl.sh: check the logfile /u01/applr1211/VIS/inst/apps/VIS_server01/logs/appl/admin/log/adformsctl.txt for more information ... .end std out. .end err out. **************************************************** Executing service control script: /u01/applr1211/VIS/inst/apps/VIS_server01/admin/scripts/adoafmctl.sh start script returned: **************************************************** You are running adoafmctl.sh version 120.8 Starting OPMN managed OAFM OC4J instance ... adoafmctl.sh: exiting with status 204 adoafmctl.sh: check the logfile /u01/applr1211/VIS/inst/apps/VIS_server01/logs/appl/admin/log/adoafmctl.txt for more information ... .end std out. .end err out. ****************************************************
Thank you very much04/22/10-20:21:10 :: adoacorectl.sh version 120.13 04/22/10-20:21:10 :: adoacorectl.sh: Stopping OPMN managed OACORE OC4J instance opmnctl: stopping opmn managed processes... ================================================================================ opmn id=server01.centralbiz.biz:6200 no processes or applications matched this request 04/22/10-20:21:10 :: adoacorectl.sh: exiting with status 150 ================================================================================ 04/22/10-20:21:29 :: adoacorectl.sh version 120.13 04/22/10-20:21:29 :: adoacorectl.sh: starting OPMN if it is not running opmnctl: opmn is already running. 04/22/10-20:21:29 :: adoacorectl.sh: Starting OPMN managed OACORE OC4J instance opmnctl: starting opmn managed processes... ================================================================================ opmn id=server01.centralbiz.biz:6200 0 of 1 processes started. ias-instance id=VIS_server01.server01.centralbiz.biz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -------------------------------------------------------------------------------- ias-component/process-type/process-set: default_group/oacore/default_group/ Error --> Process (index=1,uid=142035787,pid=17959) failed to start a managed process after the maximum retry limit Log: /u01/applr1211/VIS/inst/apps/VIS_server01/logs/ora/10.1.3/opmn/default_group~oacore~default_group~1.log 04/22/10-20:22:47 :: adoacorectl.sh: exiting with status 204 ================== 04/22/10-20:22:47 :: adformsctl.sh version 120.16 04/22/10-20:22:47 :: adformsctl.sh: starting OPMN if it is not running opmnctl: opmn is already running. 04/22/10-20:22:47 :: adformsctl.sh: Starting OPMN managed FORMS OC4J instance opmnctl: starting opmn managed processes... ================================================================================ opmn id=server01.centralbiz.biz:6200 0 of 1 processes started. ias-instance id=VIS_server01.server01.centralbiz.biz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -------------------------------------------------------------------------------- ias-component/process-type/process-set: default_group/forms/default_group/ Error --> Process (index=1,uid=142035788,pid=18107) failed to start a managed process after the maximum retry limit Log: /u01/applr1211/VIS/inst/apps/VIS_server01/logs/ora/10.1.3/opmn/default_group~forms~default_group~1.log 04/22/10-20:23:23 :: adformsctl.sh: exiting with status 204 ============================== 04/22/10-20:23:23 :: adoafmctl.sh version 120.8 04/22/10-20:23:23 :: adoafmctl.sh: starting OPMN if it is not running opmnctl: opmn is already running. 04/22/10-20:23:23 :: adoafmctl.sh: Starting OPMN managed OAFM OC4J instance opmnctl: starting opmn managed processes... ================================================================================ opmn id=server01.centralbiz.biz:6200 0 of 1 processes started. ias-instance id=VIS_server01.server01.centralbiz.biz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ -------------------------------------------------------------------------------- ias-component/process-type/process-set: default_group/oafm/default_group/ Error --> Process (index=1,uid=142035789,pid=18262) failed to start a managed process after the maximum retry limit Log: /u01/applr1211/VIS/inst/apps/VIS_server01/logs/ora/10.1.3/opmn/default_group~oafm~default_group~1.log 04/22/10-20:24:05 :: adoafmctl.sh: exiting with status 204 =========================
MsKHello
Please see if the solution to (Note: 412980.1 - oafm, forms and the oacore does not start after change of IP address) help.
Kind regards
Hussein -
Dishes VM for EBS R12.1 RAC
Hello
I downloaded VMware http://dlm2.vmware.com/software for my RAC configuration tests.
I saw 3 versions: 2.0.0 2.0.1 and 2.0.2. of course, I chose the recent (2.0.2). It is supported by CARS?
VMware-server - 2.0.2 - 203138.exe
is - it everything I need VMware install EBS R12.1 RAC? or am I choose the right file?
VMware-server - 2.0.2 - 203138.i386.rpm
VMware-server - 2.0.2 - 203138.x86_64.rpm
I'm also confused on the other versions of this :(
You can download Workstation 7.1 to http://downloads.vmware.com/d/
And also:
VMware-player - 3.1.3 - 324285.exe < == Can I also install CARS in it?
Thank you very much
Mrs. Mina
Published by: Crystal on December 10, 2010 01:17Hello
Get started with VMware server edition,
This will be enough for you.
Thank you.
-
11 GR 2 CARS vs. 11 GR 1 material RAC to EBS R12.1
Hi hussein/helios
We have just started creating CARS for 11 GR 1 material - EBS R12.1 where we met a lot of problems :(
Then here's the client asking for new requirements. Instead of 11 GR 1 material, her force us to upgrade to DB 11 GR 2 and then BECAUSE he huhuhhu
Y at - it notes metalink separated for installation of the EBS R12.1.1 - 11 GR 2 - RAC? agains R12.1.1 EBS - 11 GR 1 RAC matter?
Kindly give me the commentary on this configuration/configuration please...
Thank you very much
Ms. KHello
Refer to the last doc for the GR 11, 1 material doc (doc contains links to all versions of Oracle database that can be configured with R12).
Thank you
Hussein -
patch applTier in ebs R12 RAC environment.
Dear Sir
Please give me some ideas how to fix in the CARS and approx.
I have patched in single instance before but never in the CAR with several nodes.
I have
dbTier = 2 node RAC database 10.2.0.4
ApplTier = 2 nodes (ebs R12 rub6)
should I run adpatch on the two applTier?
Thanks in advance for your help.
Kind regardsHello
in 2 appl environment, be it records the same patch to the database two times?
It will be saved once, so if you query AD_BUGS for the patch, you will find an entry.
Kind regards
Hussein -
VMware to install RAC for EBS R12
Hello
I want to test the CARS for EBS R12 installation on vmware. My OS is OEL 5.4
Can you help me configure vmware please? What prerequisites them?
Thank you very much
Ms. K
Published by: user_unlimited on Sep 2, 2010 12:22 AMHi again,
I want to test the CARS for EBS R12 installation on vmware. My OS is OEL 5.4
Can you help me configure vmware please? What prerequisites them?You can also view links below
http://www.Oracle-base.com/articles/10G/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
http://blogs.Sun.com/rajeshthekkadath/entry/oracle_rac_references
http://communities.VMware.com/thread/199070Respect of
HELIOS -
Cloning EBS R12.2 run and patch editions
Hi all
I noticed that when I do cloning EBS R12.2, I cloned two race and records editions patch (fs1 and fs2) with identical content but different port pool game.
My question is, because they have different ports, I can start editions both the two? Start or any of them and use alternately?
Thank you
MK
Yes you can start the services of two file systems (use "forcepatchfs" for the patch file system), but users should be accessing the file system to run only. Start services on the patch file system is required for certain tasks that are usually documented (examples, (1375769.1), (1590356.1) and (1530033.1)).
More details on the RUN/PATCH file systems found in:
Concepts of Oracle E-Business Suite
Oracle E-Business Suite Guide interview
Thank you
Hussein
-
EBS R12.2 Failed cloning appsTier
Hi all
EBS R12.2
I cloned my applTier, but it took so much time and hanged.
When I restarted the failed clone, I get error of inventory:
#############################################################
Started ApplyAppsTier to Wed Nov 12 14:49:54 PHT 2014
Version:
ApplyAppsTier.java: 120.11.12020000.6
#############################################################
Under Oracle homes are already enrolled in the global inventory:
/ Home/appluat/UAT/FS1/FMW_Home/Oracle_EBS-App1
/ Home/appluat/UAT/FS1/FMW_Home/webtier
/ Home/appluat/UAT/FS1/FMW_Home/oracle_common
Output of cloning...
Ensure that Oracle homes above are not saved to the global inventory "/ u01/oraInventory/ContentsXML/inventory.xml" and restart the script adcfgclone.pl
--------------------
I tried to unregister the existing oracle_homes, but I got by using the error:
$./runInstaller.sh - detachhome ORACLE_HOME = / home/appluat/UAT/fs1/FMW_Home/oracle_common
From Oracle Universal Installer...
Check the swap space: must be greater than 500 MB. Real 9241 MB passed
The pointer of the inventory is to /etc/oraInst.loc
The inventory is located at/u01/oraInventory
'DetachHome' failed.
How can I solve this problem of radiation? How can I manually remove the clone appsTier recorded at home?
Thank you very much
Wee
Hello
Please use the below command
/Oracle_EBS-App1/Oui/bin/detachHome.sh Thank you
Bharat
-
Hi all
I use ebs r12 12.1.3 and unique db 11.2.0.3 on OUL5x64
database using OMF file system
cloning of database level using quick clone and still get this error.
RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 14/12/2012 11:26:10
ORA-01276: cannot add files u01/clone/DB/data/stage/o1_mf_system_8cldc5bg_.dbf. File has a file name of Oracle managed files.
Can you please help?
Thanks in advance.
Kind regardsuser3715462 wrote:
Thank you, Hussein.the database is a single database in log mode archive.
Here's the script for the clone
and it is a clone of hot
Know # Cloning Oracle E - Business Suite Release 12 RAC - Enabled systems with rapid Clone [559518.1 ID]
4.2 Create Image of database
This note is for CARS
but can I use it for the unique database to create a database in step 4.2 imageKind regards
Perl /u01/app/oracle/product/11.2.0/dbhome_1/appsutil/bin/adclone.pl.
Java=/U01/app/Oracle/product/11.2.0/dbhome_1/appsutil/JRE/.------
mode = stage.
stage = / clone/DB.
component of database = \
method = RMAN.
dbctx=/U01/app/Oracle/product/11.2.0/dbhome_1/appsutil/TEST_db1.Xml.------
showProgressIf there is a single instance then please follow the steps (cloning Oracle Applications V12 with rapid Clone [406982.1 ID]) and please, do not use the CAR doc.
Thank you
Hussein -
CAR-to-car cloning of EBS on the same host
I'm running a car-to-car cloning of EBS on the same host... trying to run the below command, I get the errors below
Perl adclone.pl component java=/db/app/oracle/product/11.2.0/db_2/jdk/jre = dbTier mode = stage=/db/app/oracle/product/11.2.0/db_2/appsutil/clone/ = dbctxtg=/db/app/oracle/product/11.2.0/db_2/appsutil/dev21_ifmisdbdev01.xml rmanstage = CUSTOM method / fra/STAGE/data/internship/rmantgtloc = + srcdbname FRA = dev2 pwd = apps showProgressode
Logfile located at /db/app/oracle/product/11.2.0/db_2/appsutil/log/dev21_ifmisdbdev01/ApplyDBTier_09121455.log
/ 50% complete type system database Source key ("single" or "car").
The system is identified as active CARS!
Restoring the head node of RAC database on the new system via RMAN target...
THIS PROCESS TAKES A LONG TIME TO COMPLETE AND DEPENDS ON THE SIZE OF THE SOURCE SYSTEM DB
Enter the first phase to RMAN restore
-50% finished
Not able to run the first phase to RMAN restore!
ERROR when executing apply...
-bash-4: $1 tail-f /db/app/oracle/product/11.2.0/db_2/appsutil/out/dev21_ifmisdbdev01/restore-rac1.log
ORA-19504: could not create the file "+ FRA/dev2/controlfile_dev2.ctl".
ORA-17502: ksfdcre:3 cannot create the +FRA/dev2/controlfile_dev2.ctl file
ORA-15001: diskgroup "FRA" does not exist or is not mounted
ORA-15055: unable to connect to the ASM instance
ORA-15055: unable to connect to the ASM instance
ORA-27300: OS dependent operating system: open failed with status: 13
ORA-27301: OS Error Message: permission denied
ORA-27302: an error occurred at: sskgmsmr_7
Complete recovery manager.
operating system permissions
-
OBIEE + OLIVER + installation of end to end EBS R12
Hi gurus of the Oracle,.
I have installed the following applications. OLIVIER 7.9.6.3
1 OBIEE 11 g (11.1.1.6)
2 CAD 10.1.3.4.1 (imported repository)
3 Informatica 9.0.1 (imported repository)
4 EBS R12
Everything is setup and works very well. Now, I want to connect it.
EBS is up and running, OBIEE works, but where will find the diagram of DM for OBIEE and I arrived at the database of the EBS. But what else I need to run the initial race in CAD that extracts the Alpha of EBS R12 charge and generates data in OBIEE DM. I don't know if I already have these available in OLIVIER installation scripts. I am little stupid cant figure where they are.
Help, please.
Kind regards
Suresh
Published by: user10876301 on January 13, 2013 13:59Hi Suresh,
For the olive TREE to do a data load some things must be configured. You will find in the attached link to make configurations:
http://docs.Oracle.com/CD/E20490_01/BIA.7963/e19039/TOC.htm
And for the source database, I think that you have followed the installation chapter 4 doc will give you the DM schema and how they can be configured in Informatica and DAC.
http://docs.Oracle.com/CD/E20490_01/BIA.7963/e19038/TOC.htm
Let me know if this helped.
Kind regards
Jay -
Oracle EBS R12 can be implemented on Sun Blade SPARC T4?
Hello
One of our customers has implemented Oracle EBS 11i, as follows:
-Oracle database 10 g 2 RAC (node 2)
Application - single node
O / s: Sun SPARC Solaris on SPARC v490 servers.
They want to spend to R12. They are curious if R12 is supported on Sun Blade T4 SPARC servers.
Please let me know if Oracle EBS R12 is supported on servers of Sun Blade SPARC T4 - 1B.
Kind regards
ThiruYes
Pls check the certification on MOS and also represent
Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Oracle Solaris on SPARC (64-bit) [ID 761568.1]
Kind regards
Maybe you are looking for
-
For u400 BIOS versions changelog
Where is it possible to see the changes in the new versions of BIOS for u400 model?
-
Hello I have a HP Probook 470 G1 and am having problem to connect to bluetooth devices. I win windows pro 8.1. When I look at the page of the software for my laptop on HP's site, they list a certain different drivers. How will I know that I have inst
-
How can I change my 3 MB pdf docx file
I'm having a problem submitting my resume in usajobs. Back to change CV to 3 MB, but it is supposed to take pdf docx tends in my curriculum vitae. Where is the problem or what's the problem?
-
in the Panel is a folder called infopage class, can someone tell me what it is and is it safe? Original title: class infopage
-
Browse the folders with image files, I cannot see the thumbnail icons for images correctly. I know, it should be possible, but I can't do it. When I first open a folder in Explorer, I see the correct images for a fraction of a second, then all image