Patches before you begin an upgrade

Similar Questions

• How to clear the output buffer, possibly resize and burn again, before you begin the task of output

  I use PyDAQmx with a USB-6363, but I think the question is generic to DAQmx.

  I have an output buffer that I want to be able to (re) write to without starting the task output.

  More specifically, I have a graphical interface and a few sliders, the user can move.  Whenever the slider changes, a new set of values is loaded into the buffer output through DAQmxWriteAnalogF64.  After you set the value, the user can click on a button and start the task output.

  In some cases the change in cursor does not require a change in buffer size, only a change in the data.  In this case, I get the compalint following DAQmx as they tried writing:

  The generation is not yet started, and not enough space is available in the buffer.

  Set a larger buffer, or start the generation before writing data more than content in the buffer.
  Property: DAQmx_Write_RelativeTo
  Value: DAQmx_Val_CurrWritePos
  Property: DAQmx_Write_Offset
  Corresponding value: 0
  Property: DAQmx_Buf_Output_BufSize
  Corresponding value: 92

  In other cases the change in cursor requires both change in the size of the buffer and data modification.  In this case, I get the following, but only after that do a few times each time increase the size of the writing.

  DAQmx writing failed because a previous writing DAQmx configured automatically the size of output buffer. The size of the buffer is equal the number of samples written by channel, so no additional data can be written before the original task.

  Start the generation of before the second writing DAQmx or set true in all instances of writing DAQmx Auto Start. To gradually write to the buffer before starting the task, call DAQmx Configure an output buffer before the first writing DAQmx.
  Task name: _unnamedTask<0>

  State code:-200547
  function DAQmxWriteAnalogF64

  I tried to configure the output via DAQmxCfgOutputBuffer buffer (in some cases, by setting it to zero or a samples, then save again, in an attempt to clear it) but that doesn't seem to do the trick.

  Of course, I can work around the problem by loading data only when the user clicks the end button, but not what I'm asking here.

  Is it possible to "remake" the writing of output before you begin the task?

  Thank you

  Michael

  Today I have no material practical to validate, but try unreserving task before writing the new buffer:

  DAQmxTaskControl (taskHandle, DAQmx_Val_Task_Unreserve);

  With a simulated device, he made the error go away in case the buffer is the same size.  You will need to validate if the data are in fact correct, but I think it should be (unreserving I would say reset the write pointer so the old buffer are replaced with the new data).

  I always get errors when you try to change the size of buffer if (on my 6351 simulated).  I posted some similar mistakes about the reconfiguration of the tasks here, I guess it is possible that this issue has also been set at 9.8 (I always use 9.7.5 on this computer).  If the behavior is still present in the new driver, and also appears on real hardware (not just simulated), then it seems that this is a bug of DAQmx someone at OR should be considered.

  I wrote a simple LabVIEW VI that captures the error in order to help people to NOT reproduce it:

  

  The best solution at the moment would be likely to re-create the task if you need to change the size of the buffer (or avoid writing data until you are sure what will be the size of buffer).

  Best regards

• Hi, I bought a new laptop and I would like to install Photoshop 5.5 Extended for the new laptop computer. Something to consider before you begin to install?

  Hi, I bought a new laptop and I would like to install Photoshop 5.5 Extended for the new laptop computer. Something to consider before you begin to install?

  The reason is to avoid any inconvenience. What do I need to uninstall Photoshop beforehand?

  Thanks for the tips

  The mobile fact have separate start-up and data readers?  If so and the boot drive has limited space, you may want to consider relocation of things like bridges on the data disk cache.  I can't think another thing to consider from the start, however.

• Is it necessary to have windows 7 is installed before you buy the upgrade of Windows 8

  Hello
  Is it necessary to have windows 7 installed before you buy windows 8. Or only the product key is sufficient.

  Lets assume that it is necessary to have windows 7 installed. Then, suppose if I want to reinstall windows 8, I have to follow the procedure:

  1. install windows 7
  2. run the upgrade of windows 8

  Or we can directly run windows 8 upgrade.

  Please help in solving my doubt.

  Andre said it is "recommended", it is always best to clean install original DVDs.

  Maybe you can google that question, you can get answers, we cannot give you here.

• Newbie - Question of Installation (before you begin)...

  Good, first of all the question as I embark on the virtual path (or the path of virtualization?).  Here's the situation...

  I have two Dell servers of very high quality (2-processor quad-core, 8 GB RAM, 1.5 TB of storage in RAID 5, double NIC, double P/S backup tape).  They were both purchased before I started and are total overkill for the needs of the Department.  I also have 3 old servers and a handful of former workstations that we keep around because they have environments that are required at all times and are running software that would be difficult to get your hands on these days).

  Recently, we purchased a license for the development of the 1-vCenter Server 1 - VI3.   My initial goal is pretty simple (one of the more recent servers convert an ESX Server, hosting of server environment that currently exists on this area as well as several other virtual machines).  But before you start, I came with a few questions.

  First of all, as I just mentioned, I want to take one of the more recent

  servers (which is currently a backup from the Department Server)

  and convert it to a host ESX Server (I've got the correct jargon of hope).  But I want to preserve the environment that are in this box as a VS.  Is there a way to do this?   Can I use the free Converter P2V and temporarily save the virtual server to a SAR unit and load/configure ESX on this server and finally pull on the virtual server of origin of the NAS unit file?  My concern is that I must have loaded somewhere ESX before I can create a VM, which will not work because the process of creating the ESX Server will scan the server I'm trying to keep.  No sense?

  Second question: at the moment, I want to use the 1.5 TB raid configuration that is presently on this box (local storage) to store the virtual machine.  I'm 99% sure this is a SCSI configuration (I am currently off site and impossible to verify).  There are SCSI?  And there at - it no problem just by using local storage to the virtual machine?  Most of the configurations I've seen described online and in books use SAN for their virtual machines.  But the virtual machine I want to create is not "critical" systems  They are important, but if they were down for a day or two, it would not be the end of the world for us.  Finally, I would like to implement the ESX Servers redundant with external storage, but it is where I am at the moment.  Once I showed you the benefits, I will be able to push in this direction.  So for now, I want to use the high-end box that I like the epicenter of my virtual world.

  I read a virtual infrastructure for Dummies, and it was actually excellent.  I was never a fan of the books 'for Dummies', but I did a little research, and the reviews have been very strong, so I gave it a try.  But I'd be open to other suggestions as well in terms of good books for a mid-level administrator.

  Thanks in advance for the help.  I've learned over the years asking a few questions before a change of this magnitude is much better than labour in advance and hoping for the best.

  CareyBroph

  1: Yes, you can use VMware Converter to convert physical machine virtual server vmware server instance and then use the converter to convert from vmware esx server. I would say a good backup and test the server vmware vm before deleting the physical installation.

  Yes, in 2: SCSI is absolutely fine if caught serveris supported by VMware. The reason why most people use SAN or iSCSI is that they need a storage shared for clusters. You may want to consider this, too since you have the licenses required to run VI3 with ESX Server switchis and vCenter "ontop" and you eliminate the single point of failure of a standalone ESX Server would be. But as you said, the amount of the fine with the non-critical systems.

  Kind regards

  Gerrit Lehr

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Menu background looping stops and black for a second before you begin the movement again

  Help. I don't know that I did it before without a hitch. Yet CS4 I have a video file in a loop as background to the main menu. When it finishes its first loop, it stops, goes black comes back on the first image, suspends momentarily and then starts again. I created a perfect video loop. I thought that this could well be the preview but it did the same thing when I burn on a DVD.

  Any ideas as to why it isn't seamless loop? Any suggestion would be appreciated.

  There's always a break when a motion menu loop, even on DVD of Hollywood.  Generally however, a fixed framework of the last frame of the clip is displayed while the laser seeks at the beginning of the clip.

  Without doubt, I misunderstood the problem initially.  I thought the OP was black during the break.  If the OP is to do a flash of black before the fixed image, maybe there is an extra frame included in the clip at the end of the sequence of Pr.  It is useful to check.

  I recommend some sort of fade out/fade upward for the video of the menu query because the break when a loop is run is impossible to avoid.

  -Jeff

• DBUA always necessary when installing the game patches before the creation of the database?

  Hello!
  
  I'm actually reinstall my tesserver from scratch. Of course finally system shoul be completely corrected. As performer DBUA really is the boring part of the application of the fix, I wonder if I have to run DBUA at all, if I do all the patches before you create the database. As much I know it shouldn't be necessary, right?
  
  My plan is to do the following
  
  -Install 10.2.0.1
  -Install Patch 10.2 .0.4
  -Install processors
  -Create the database
  (-> performance DBUA is not necessary)
  
  I'm wrong or what I need to use DBUA anyway? BTW: the database will be a "new database" (not recreated from a template).
  
  (I think that databases in the models are just restored databases and should be corrected in any case, after the creation).
  
  Best regrards,
  Marcus

  DBUA is used to upgrade the databases after you patched. Since you will create a new database after you apply the hotfix, you don't need to update.

• the upgrade of windows 8 at 81, will be hp support assistant update drivers before you start

  I recently bought fancy m7 j020dx 17 running windows 8, I thought it would make more snse upgrade to windows 8.1 before I install other software and other.  It's not not clear to me if hp support assistant will detect if the drivers I have are all of this to date.  can anyone tell me for sure?  Thank you!

  KevinOr

  Do not use HPSA to 8.1 Windows Installer driver, many system had an accident with the update of the Bios on HPSA

  Download the Bios and the driver manual

  before you start the windows 8.1 update

  Uninstall the Virusscanner and install the new Bios

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp65000.exe

  Download the other drivers from here

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=5447327#N2074

  If you have a problem after installation

  Delete restart driver Intel HD and install the new

  Read the instructions of Windows 8 to 8.1

  http://support.HP.com/us-en/document/c03847367

• Can (must) I apply all current patches to the newly installed instance of EMP 11.1.2.1 release before you start to configure it?

  Can (must) I apply all current patches to the newly installed instance of EMP 11.1.2.1 release before you start to configure it?

  Hello

  First, you configure the new instance and check if it works well. Then apply patches, following the patch readme. Patches usually does not require a full configuration.

  Thank you

  KK

  ~ Mark answer if its helpful.

• UCCE/CHP - backup before YOU patch?

  Hi all
  Running packed EAC 9.0.4 & CVP 9.0.1.
  What is your typical backup (if any) procedure before you apply the fixes ES UCCE/CHP?
  Since it is a virtual environment, is it wise to simply clone the servers in question to be used as a backup in case of installation errors ARE?
  Suggest this as preferable method (with VSphere Clone VMs/create OVF) during a more traditional backup as something that could be made in a non-virtualized UCCE environment? (i.e. export config and backup CVP CVP call servers and gateways VXML of OAMP, backup bases CHP, using SQL, back up the registry key "Register of Cisco Systems, Inc.", use the utility NTBACKUP (?), etc...)
  Thank you
  Mike

  There is no need to take a backup before installing any ON boxes of UCCE. If anything is required to do before applying the ES, the same would be mentioned in the release notes ARE himself. You can follow the above-mentioned procedure that otherwise needs.

  In ADDITION, replaces specific files based on defect fixes and we can easily return if you have questions...

• bluetooth mobile keyboard wedge does not work before the beginning of the window

  Hello Microsoft,

  I bought the mobile bluetooth keyboard dock recently.
  It works not in the BIOS and CMOS to move but to start the window, everything is ok.
  I use dougle bluetooth to connect this with my computer keyboard.
  I already activated the USB keyboard in the CMOS using old PS2 Keyboard. But it does not work.
  Please help me to use my keyboard before the beginning of the window.
  Respect,
  Arkar

  Hello

  Which machine or laptop you are using.,.
  some of the model require Bluetooth patch file to complete, that patch file will be given by the laptop or desktop vendor, please contact their tech support toll free number.check with Bluetooth mouse also

• Before you buy Windows 7 it will modernize my Windows XP?

  Before you buy Windows 7 it will modernize my Windows XP?

  First, see if your computer meets the Windows 7 system requirements:

  o 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor
  o 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)
  o 16 GB available space disk (32-bit) or 20 GB (64-bit)
  graphics device o DirectX 9 with WDDM 1.0 or higher driver

  If so, run the Windows 7 Upgrade Advisor to check for possible problems.  If it passes this test, you can buy a Windows 7 upgrade version and use it to perform a custom (clean) installation.   For more information, see upgrade from Windows XP to Windows 7 and Windows 7 Upgrade Considerations .

• ooxcoooo142 when you try to upgrade to windows 7

  I am trying to upgrade to Windows 7 and I get to a point that he wants to restart and I get the error code (00xc0000142) and I have to which close?

  If anyone can help. I am running Windows Vista and I also get a (winrscmde) stopped working and an error (FFFFFFFE) when you try to update

  installs? Help...

  Hello

  Do the following before you start:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  See you soon.

• EqualLogic - how to level a new table before you add to the Group

  I have a new table which is v7 and I try to add a group of v8.  It won't join the group due to version incompatibility.  How to pass it to v8 so I can join the Group?  Thank you.

  Hello

  Create a new group with one member.  I wouldn't use the Remote Setup Wizard to do this.  Who sets policy RAID that requires you to wait that ends before you can upgrade the firmware.

  I would rather the serial port.  Then, you need to only configure port network and the new IP group.

  Once you answer the basic questions are the GrpName > cli prompt you can then transfer the kit to upgrade and update the firmware.

  Once you run the "update" process and restarted the table, reconnect and make sure it is in the new revision.  GrpName > show Member which will show.

  The CLI run "reset" to return unit to factory reset, and you can now add in your other group.

  Kind regards

  Don

• Vista System Restore does not work. I disable Norton Antivirus before you start the process. What can I do else?

  Vista System Restore does not work. I disable Norton Antivirus before you start the process. What can I do else?

  1. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  2 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner