Path text Photoshop to illustrator

Similar Questions

• Export of several paths from photoshop to several illustrator files

  Hello

  I have a task that I often repeat, and I know that there should be a way to write a script for the same photoshop thing. But my level of technology in scripts is zero and I was hoping that someone could help me?

  Background: I am an artist and convert image Posterization files paths to feed a laser CNC cutter. The image is broken down into separate layers (which are glued on paper), and each layer is converted to describe paths (which needs to be cut by the machine). for each image that I do there are about 3-8 paths that I create, each the name of a particular name. Then I manually export each path one to an illustrator file (export > traces to Illustrator), the files are named with a prefix_ < the path name >.

  Sometimes one large image is made upwards of 25 small sections (each section is a separate photoshop file) each with 3-8 paths and it's all of them adds up to a lot of manual work each time.

  is it possible to write a script that will export each individual path from phtoshop file to an illustrator file separated with the name prefix_ < path name > in a given directory (or on the desktop if that is too complicated a foler)?

  I searched the web but have not found a result that meets this particular need. And as I mentioned my knowledge scripts is not good enough to create/change myself.

  Thanks in advance...

  Avinash,

  I think Photoshop is not the best tool for your job. I would use Adobe Illustrator,

  Vectorization or Trace of Image (since CS6).

  The vectorization of a raster image is entirely under control many parameters. Export to EPS

  shows in blocks of text like this file:

  991.532 1.85205 MB
  993.008 1.61035 992,592 3.26025 992,643 4.44482 cv
  991.515 4.21387 990,75 3.62207 990,791 2.22217 cv
  991.221 2.28271 991,45 2.14063 991.532 1.85205 cv
  CP
  . 031373.65098.501961 0 CMYK
  EF

  MO = moveto

  CV = curveto (Bezier curve)

  CP = closepath

  CMYK color =

  EF = eofill (fill mode)

  Occasionally, for straight lines:

  Li = lineto

  Ignoring the color and fill mode, it should be 'simple' extract the Bézier path information.

  Why is it necessary to separate all these paths in single files?

  Laser cutting can be controlled for all the work in a stream, because button

  and closepath do not correspond to the "move without cutting" and "end of cut this way.

  Of course I am lack of knowledge of your actual task. Please consider my contribution

  as a suggestion for an alternative.

  Cordially - Gernot Hoffmann

• Are there any suitable to the path text in photoshop cc2015?

  Are there any suitable to the path text in photoshop cc2015?

  everyone knows that the NLS please discus with me.

  Thank you

  Surendhiran

  Hello Sarika,

  I thank you very much, just now trying this option his good work.

  Thank you

  Surendhiran.

  9382661913

• My code/text/content is deleted when selected in Dreamweaver, Photoshop, and Illustrator

  Since last week, when I select the text in photoshop and illustrator or code in dreamweaver, it is deleted.  I updated all the apps and uninstalled and re-installed dreamweaver, but nothing seems to work.  Is it a question of application or a mac problem?  Its only happens with adobe products.

  It resembles what happens as speech recognition & dictation has been activated.  So I can keep my incredibly large bracelets for now.

• Is it possible to create a text on a curve path in Photoshop 6.0 (Windows)?

  Hello

  I'm new to Photoshop and Yes... I use a very old version of Photoshop (i.e. Photoshop 6.0).

  I wanted to know:

  If it is possible to create a text on a curve path in Photoshop 6.0 (Windows)? If so, how?

  Note that I don't want to create wraped text (using the Arc etc..).

  Specifically, I want to type text along the bottom of a circular image.

  I checked the various blogs that explain how do to the newer versions (or MAC version) Photoshop.

  I use the version of Windows.

  Thank you... I appreciate all the help!

  Looks like you're out of luck.  Text on a path arrived with CS (Photoshop 8)

  http://en.Wikipedia.org/wiki/Adobe_Photoshop_version_history

  I doubt anyone here will be able to test it with such an old version, but the things that come to mind create each letter on its own layer of text and using the transformation that is free to rotate and position.  Something else will produce bad bad results - unless someone else has a better idea.

• Photoshop or Illustrator or both?

  I'm fairly new Adobe software and I am trying to create an impression which will include scanned watercolors PNG images.  I then add text.  The final print must be a JPEG or PDF file sizes.  I read that Illustrator is better for creating text, but since I use PNG images and the final piece should be JPEG, should I create just the whole thing in Photoshop or a combination of Photoshop and Illustrator?  Thank you.

  If you're just adding text. PS is discovered. It doesn't have some issues with some paragraph styles: balls etc, but it can be bypassed.

• Hello. I have a big problem. I have Photoshop, Indesign, Illustrator CS4 and Flash CS5 programs. I bought the programs a few years ago and used on my Mac with version 10.6.8. Now, I have a MacBook with the latest version 10.11. I wanted to copy the pro

  Hello. I have a big problem. I have Photoshop, Indesign, Illustrator CS4 and Flash CS5 programs. I bought the programs a few years ago and used on my Mac with version 10.6.8. Now, I have a MacBook with the latest version 10.11. I wanted to copy the programs on my MacBook to work also on this computer. I copied the folder with the programs 'Programs' and the folder of the "Library / Application Support / Adobe" on my USB key and pulled on the MacBook in the program folder and the folder of Adobe. Then I restarted the computer. When I wanted to start a program, I got with Photoshop, Illustrator, and Flash, the error 6 error message. For Indesign: "Adobe ID missing required files please reinstall missing file / Library / Application Support / Adobe / support /... / ROMAN." TXT ".» But on my old computer I could not find a record of support for the Type in the path to the Library / Application Support / Adobe. And I don't know what I have to do because of error 6. Can someone help me please? Thank you very much.

  Avoid copying files from one computer to the other. It won't work. You run out of hidden files scattered around the hard drive and interrupt the licensing mechanism.

  Uninstall, run the cleanup tool.

  Adobe - Adobe CS5 clean tool

  Reinstall from scratch and enter your serial number.

  Download download install and Installation Help | Download and Installation Help

  They will install under 30 days of testing. Enter your valid serial number to unlock the tests.

• Photoshop or Illustrator

  I need to create story boards for a short film I do, should I use Photoshop or Illustrator to draw.

  Herschel,

  Photoshop is basically graphics raster, essentially padding in pixels, depending on the resolution.

  Illy is basically for some vector illustrations, essentially to create paths/objects based on anchor Points and handles, resulting in a smooth work no matter the size/zoom level.

  Each has of the other elements.

  Many work in one or the other or both, depending on the task, normally from the vector illustration to Illy and adding a finishing touch in Photoshop.

• run scripts in photoshop via illustrator cs5

  Hello

  Is it possible to run scripts in Photoshop via illustrator

  I have 2 other script

  script 1 work in illustrator with eps and export to JPEG file

  text 2 where I want to cut the jpeg exported to illustrator in photoshop, then save it back

  I have 2 other script with me

  can someone help me with both clubs and run them at the same time...

  Thank you
  APPU

  Using BridgeTalk to speak of Illustrator to Photoshop, here is a sample of Mark

  Illustrator script to open the file in Photoshop

  or use inter communication app

  Open PS, open a document

  // start your illustrator script
  var Aidoc = app.activeDocument;
  /*
  continue with your script
  
  */
  // when ready, call your photoshop script
  // this sample alerts the active document name and closes it
  photoshop.executeScript("alert('document name: ' + app.activeDocument.name); app.activeDocument.close()");
  

• Is the path of export to illustrator the only way to get a psd w / clipping appears in Illustrator?

  I'm wasting time having to put my image in Illustrator, then manually align the clipping path. You used to be able to save a file with a clipping path an EPS in photoshop, select "maintain vector data", place it in illustrator and cmd-press Y to see the clipping path. I need the image and clipping in Illustrator and image path is too complex to create a mask of Illustrator. I tried to save it as an EPS but "retain vector data" is gray.

  Save a PSD. If you need access to the path, then incorporate him (the image in Illustrator).

  If you just want to use the path for cutting, set it as a clipping path in Photoshop.

• error message color when opening a file in photoshop to Illustrator

  I have a picture of the airport, with a sky blue etc.  I want to make all one color as a background image.  I want the background of the photo to be light orange wit the building to be darker orange.  Is it possible to do this in Illustrator?  To try background and foreground of different colors or do, I do in Photoshop?  How can I fill all the colors in the picture for only two colors?  This picture is intact.

  I also have a photo that's photoshop effects.  When I open it in Illustrator, I get an error message.  It says "incorporated the document color profile does not match the current CMYK working space.  The current CMYK color management policy is to dispose of the profiels which do not correspond to the workspace.

  I have the beginning of a web page in my workspace.  With this picture, I think that I'm opening in a separate page, but it won't let me.  I'll probably use the untouched photo, but I'm curious as to why its gives me the message.  My workspace must be web safe RGB colors.  This is - why it doesn't let me open the photoshop CMYK file?   I guess there unsecured web colors, but my thought was to change in all the colors of the web sure but maybe it's much too hard in Illustrator?

  Thankx,

  You can color a grayscale tiff in Illustrator by simply selecting and then selecting a color that you want.

  I think that if these are two tone and you want really two different oranges, you can cut the building is in
  Photoshop or Illustrator and place it above the other.

  I would normally do a duo, but who would mix the two colors.

  So that's how I would go to this subject in Illustrator

  1 import the image in tiff format grayscale or import it and convert it to a range of gray ranging in Edition > change the colors > convert to grayscale

  2. then, select the background color.

  3. then copy the picture and paste in front command C and F of order and select the dark orange color

  4. with the pen tool create a one way which is exactly the shape of the building. Make sure that it is a closed path.

  5. Select the path and the image of the high that you paste in front.

  6. then go to object > Clipping Path > make

  7 I would like to then combine the two

  with this method, you are good with the pen tool, but this is true of the Illustrator in general.

  now with the CMYK image is what allows you to place it but simply alerts you to the current conversion.

  What you need to do is select your Photoshop and Illustrator color in sRGB settings since this is probably the space desired.

  and convert CMYK to RGB file which is what you should have done in the first place.

  So to open it I Photoshop convert to sRGB and replace it in Illustrator.

  Everything should be good.

• Fireworks, Photoshop, and Illustrator

  Hello
  
  I don't know whether to show this in the Fireworks, Photoshop, Illustrator forums or. Horrible design of two other forums and the fact that no matter how it was referenced, I could not find a button to add a topic (and Yes, I was connected) brought me here.
  
  The new replacement for Studio, CS3 Web Premium suite includes Photoshop and Illustrator. I know that both Fireworks and Illustrator for vector graphics, but other then that, what is the difference between the three? Why should I use all three when I could get with one - is there a specific use for each? Who could be better to create a Web site model?
  
  Thank you
  Dylan
  
  PS: Has there created tutorials on the software suite available somewhere, as the Studio explores those Adobe?

  Yes, the old Adobe forums are pretty bad, aren't they? :) These forums are quite slow, but - another reason some people prefer to use the sync all newsgroups around instead.

  No problem to post here, just don't be surprised if everyone says fire Fireworks is the best. ;) In fact, each tool is unique, the best at what they do.

  Everybody will tell you this, but it's really true: the best way is to download the trial of three and give them a spin. What kind of things you want to do? Choose something and try to do it in three, you will know what is best for the task quite quickly. Do not throw just a few random shapes and text around, that won't really do you give a good idea of how a real project would come down for you. Choose a practical project and do in each of the three.

  That being said, here is a summary of all three, in my opinion:

  Illustrator: Vector application, little or no Advanced frame mounting bracket. Curve learning of the powerful but very high for most people. Illustrator is printing and is rarely used for the work of the web, if you can. It has many features specific impression which are meaningless for the web and sometimes confusing and misleading for web designers.

  Photoshop: Advanced raster, vector editing program little support (sometimes critical as having no "real" vector support). Powerful image manipulation capabilities, has an average learning curve, but many gaps of efficiency according to me, making it frustrating for many beginners. Photoshop was originally for printing (and still is) but has developed some decent web features oriented (export, slices, etc.). However, it's dueling print/web feature set can get in the way both when you are dealing with a medium or the other.

  Fireworks: hybrid vector and raster Editor, exclusively for web design (not printed). All the basic features of edition of vector and raster editing combined in a very coherent, transparent environment, but found the more advanced features of vector in Illustrator or more advanced raster in Photoshop. Pretty easy learning curve. Fireworks is designed specifically for the web and has been since the beginning, has so many features focused on the web, making very targeted for web design and overall very intuitive for most web designers. For example, Fireworks is the only application of the three that has support for multi-page documents, which is really useful for web design.

  Hope that helps! I am sure that you will get more answers. :)

• Just need to Photoshop and Illustrator

  Hello

  I just need Photoshop and Illustrator for my business. There's no plan with this mixture. Is there a way to subscribe to only these 2 applications and not the whole cloud?

  I hope someone can help.

  -A

  Sure... subscribe to the special photograph $ 9.99 plan for Photoshop (do not install the included Lightroom if you don't need), and then add the one subscription $19.99 with any program you want

  Cloud Plans https://creative.adobe.com/plans

  -Subscription conditions https://www.adobe.com/misc/subscription_terms.html

  -Purchase of FAQ https://forums.adobe.com/thread/1926340

• Photoshop and Illustrator is not opening after the update of Windows 10 anniversary

  Hello!

  After the update of Windows 10 anniversary, Photoshop and Illustrator can't open. What should I do?

  Thank you!

  not serious.

  You get an error message or Apps do not respond when you try to open.

  You can run the System File Checker to see if there are any problems with Windows OS after upgrade files,

  https://support.Microsoft.com/en-in/KB/929833

  As for the latest CC applications you need to install the latest package updates Visual C++ Re-distributable.

  See the link below:

  Updated Visual C++ Runtime 2015

• Buy Photoshop CC &amp; Illustrator CC

  Hello

  I need to buy Photoshop and Illustrator CC, but how can I do?

  I see in terms of Photography Photoshop and Lightroom, is possible to change the Lightroom with Illustrator?

  How many computers can I connect to an application?

  Thank you very much

  Erika

  No, the photography Plan does not include the other siftware and you cannot switch to Lightroom for Illustrator.  You need to get the full plan or two separate plans.

  Creative cloud plans

  https://creative.Adobe.com/plans

  You can install it on as many machines as you want.  All these machines you can have two signed in use.  These two machines you can use only the subscription on one at a time.