Pavilion 15-p050ca: driver wifi can not install winner 8.1 hp Pavilion 15 - p050ca. Product G6U13A number

Similar Questions

• driver wifi is not instaled

  I have hp Clubhouse model g4... I instaled windows 7 unlimited. but not able to install wifi disk in it.
  in my device maneger missing driver Details are...

  Network controller
  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01
  PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C
  PCI\VEN_14E4 & DEV_4727 & CC_028000
  PCI\VEN_14E4 & DEV_4727 & CC_0280

  Standard VGA graphics card
  PCI\VEN_1002 & DEV_6760 & SUBSYS_1667103C & REV_00
  PCI\VEN_1002 & DEV_6760 & SUBSYS_1667103C
  PCI\VEN_1002 & DEV_6760 & CC_030000
  PCI\VEN_1002 & DEV_6760 & CC_0300

  plaese let me know that I need to install to solve this problem.

  Thank you.

  Here is the link for the graphics drivers that you need.

  You should only install this driver that will install the Intel graphics device drivers and AMD in your notebook.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99756-1&cc=us&DLC=en&LC=en&OS=4063&product=5078439&sw_lang=

• Driver WiFi does not work - "this Setup program cannot run on this platform.

  I have a Dell Inspiron 14R laptop N4110. The problem is driver WiFi is not install properly. When I save the driver of the error is "this Setup program cannot run on this platform. Please select your operating system as a whole". I have download all the updates window and update my OS. Please help me to install the WiFi driver.

  OS: Windows 7 (64-bit) SP1

  AtulRai,

  Utility of portable computer system first, then the chipset drivers or in the rest of drivers will not install.

  Start with the portable system utility and the chipset drivers and follow the list.

  Rick

• 655 HP: I can not install wifi driver hp 655

  Hello everyone.

  I hope someone will help me with this problem

  I have a laptop hp 655, and I can not install its driver wifi...

  I downloaded it (I tried more than drivers), and start the installation, but after only a few seconds this window with installation disappear.

  I don't know what to do... Thank you very much.

  It helps if you have identified the wifi adapter and let us know if the adapter is regarded as being present in the Device Manager.

  You can identify it by a couple of ways.

  One is to use Device Manager, and then view the string PCI\VEN. See the following image.

  

  Another perhaps simpler method is as follows.  By pressing the power button and immediately press the ESC key to call the start menu.

  

  Press the F1 key to call the system information window. Locate the FCC ID, WLAN.  Copy and use it in a search engine to find the driver for the installed operating system.

  Don't forget to keep us in the loop.

• What is the maximum size of hard drive, which can be installed in a pavilion d4790y desktop computer?

  What is the maximum size of hard drive, which can be installed in a desktop pavilion d4790y?

  It would be a secondary drive, not the boot drive.

  The operating system is Vista Home Premium, 32-bit.  The version of the BIOS is 5.08.

  Are there any changes or upgrades that would allow an internal hard drive 3 TB to install?

  Here are the specifications and configurable options for your desktop HP Pavilion d4790y and here are the specifications of its card mother P5BW - THE (Basswood2). Based on the specifications and the age of the computer, I would expect you to use a hard drive 3 TB as a secondary drive on Windows Vista (DISPLACEMENT SP1 or SP2) and Windows 7. Formatted as MBR would require the drive to use with a minimum of two partitions. Formatted as GPT would require only a single partition. In no case will you be able to use the 3 TB as a boot device drive because your computer does not support a UEFI BIOS that allows booting from a GPT formatted disk. No changes or updated should be held.

• Can not install display on Satellite L500D-14W driver

  Hey,.

  I have a big problem with the display driver. I reinstalled Windows now I can not install the Toshiba or any other updated the driver. I can't use the old display resolution 1366 x 768, only 1024 x 768.

  The Windows Device Manager shows only Standard VGA graphics card

  I tried so many ways to solve this problem.

  > I tried so many ways to solve this problem.
  What means?
  What version of Windows do you use?

  As far as I know that Toshiba offers drivers tested for all supported operating systems so I put t understand your problem.
  According to specification for laptop, your laptop comes with preinstalled WIN7 64-bit HOME PREMIUM & 32 bit DVD. Why you n t use one of these original images of recovery?

• Re: Satellite P300D-20U - I can not install display driver for Win XP

  Hi all!

  I bought the laptop P300D-20U, I installed windows XP on it.
  But now I can not install the driver to display on it.

  I downloaded from this site (it's the only display driver for this laptop).
  When I install and restart, Catalyst Control Center to write me that it do not display driver support and don't launch.
  Windows loads in resolution 640 x 480 and 4-bit color.

  When I'm changing resolution or color apears black screen and nothing happens, in 20 sec it cancels.
  I tried different drivers from ati.com but nothing works :(

  SRY for my English but I hope that you will help me guys, ty

  Hello

  Satellite P300D-20U belongs to the PSPDCE series and I think that it was equipped with the chip graphics ATI Mobility Radeon HD 3470 (M82XT).

  Did you choose this series in the form of European driver of Toshiba?

  I see the Display Driver for Win XP v 8.477.

  If you can not install using the setup.exe, then you should try to install this driver in Device Manager.
  Mark (possibly marked with yellow exclamation) graphics card then choose put up-to-date driver, use the Advanced installation procedure, point to the driver files downloaded from the Toshiba page and apply.

  It should work

• I can't windows 98 to connect to the net and I can not install the ethernet driver to install

  I don't know where start the ethernet card I have windows 98 can not install without a driver updated, I can't find a driver that I can towards the down loaded to an open disk and run winzip does not open on a disc and it wont let me install where it is help

  Hello

  Visit the following links to learn more about support for the Windows 98 operating system information.

  http://support.Microsoft.com/ph/1139

  http://www.Microsoft.com/Windows/support/endofsupport.mspx

  http://support.Microsoft.com/GP/lifean18

• New hard drive installed Vista Ultimate, now I can not install my printer - why?

  Computer Dell laptop hard drive replaced (warranty) with Vista Ultimate, I installed Office 2007 Professional disc 1 fine, windows update is fine, but I cannot complete the installation for my Kodak printer disc. Has been given the Internet to install via the internet address - link doesn't work either - drive flashing green bar "installation preparation" then nothing? Link Web shows 'Preparing to install' with a full bar green - then stuck there. A few minutes later, he disappears. Never installed. Do not open the drive or cross the bar - never open the Green window to install. Support Kodak decided that I was missing the .net on pre-installed OS HDD framework files. Enough of 3.45 and 4. Is this correct? Do I need previous versions, or something else is the cause. How can I check to see that all the files are correct and understand WHY I can not INSTALL MY PRINTER?

  Until the hard disk, memory & the keyboard have been replaced by the Dell tech, I had installed and printed on this Kodak printer for 9-12 months. Suggestions welcome.

  Hi LSMama,

  (1) you get an error message?

  (2) what is the model number of your printer?

  There could be several causes for this problem, try the following steps:

  Step 1: Run the troubleshooter printer available in the link below and then check

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Step 2:  Clean boot the computer and then try to install the printer

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• Can not install the printer driver that nothing works

  I have a new HP 1102W and brand new emachines running windows 7 and I can not install the printer driver up constantly mistake spent 2 hours on the chat online with an HP technician.

  Try the drivers for the LJ 1100. Use the Add Printer Wizard and choose to install the Windows update driver.

  Tom

• I CAN NOT INSTALL THE VGA INTEL DRIVER AND CANNOT ADJUST THE BRIGHTNESS

  I have HP COMPAQ 41 224tx, with windows 7 ultimate 64-bit

  I have just updated to windows 7 32-bit basic family.

  and install all the drivers like ussually, but I can't change my brightness

  and worse, I can not install the vga driver intel.

  because I can install it when I use 32-bit windows

  Please help me

  I'm sorry, my language is bad

  Indonesian IM

  It's weird.

  My last suggestion and I hope it works for you, install the amd driver directly from AMD and see if it works better than the one on the support page and the driver of your PC.

  http://support.AMD.com/en-us/download/desktop/legacy?product=legacy2&OS=Windows 7-64

  Also, try to install the latest chipset driver and see if that works too.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng

• Satellite Pro L500D - I can not install the ATI from Toshiba page display driver

  I reinstalled Windows 7 Home Premium 64-bit.
  No, I have the problem, I can not install the Ati (HD 4100), downloaded displaydriver from Toshiba for my Notebookmodel.

  > Now, I installed the displaydriver of the model Satellite A500d.
  .and? Doing a job?

• BUSINESS INKJET 2800: HAVE IT IE 9 FOR VISTA. CAN NOT INSTALL FOR THE PRINTER DRIVE INKJ 2800 B. MESSAGE: IE 5.00 INVESTIGATION OR LATER

  I WAS TRIYING TO INSTALL DR. PRINTER HP BUSINESS INKJET 2800

  I HAVE IE 9.

  CAN NOT INSTALL THE SOFTWARE.

  A WINDOW WITH THE ERROR MESSAGE SET THIS POSTER:

  INTERNET EXPLORER 5.0 OR LATER.

  HOW CA I FIX THIS FROM LITLE?

  I HAVE THE LATEST VERSION OF MICROSOFT INTERNET EXPLORER FOR MICROSOFT VISTA

  THANKS FOR YOUR HELP

  Hello

  The original CD was made for earlier operating systems.

  Follow these steps to install the printer on Windows Vista, the drivers are already included in the operating system:

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3656598&docLocale=en_US&docid=emr_na-c00868762

  Kind regards

  Shlomi

• Can not install the printer driver. Error code 0 x 0000490.

  I have Windows Vista and I have a printer HP 3512. For some reason, I can not install the printer and I keep getting an error 0 x 0000490. Help, please?

  Moved from Vista to install, upgrade and activate Forum.

  Hi Courtney,

  Please contact the Microsoft Community.

  I'd like you first try printing HP and doctor Scan.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

  After that, I would have you to refer to this article-

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=5241114

  We know if that helps your cause.

• I get an error message: The Nvidia OpenGL driver lost connection with the display driver and can not continue. Error code 8

  When I play the virtual Interactiver - Second Life Community. The screen turns white and windows tells me the display adapter stopped responding and has recovered. While the second life Viewer is still Virgin (white). I get the error in a box: The Nvidia OpenGL driver lost connection with the display driver and can not continue. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code 8. Now, I worked with Nvidia to do a clean install of the latest version of the driver. a driver in safe mode installation. They suggested to try an earlier version of the driver. Nothing that they worked me and told me to see Microsoft. The pilot hangs every 30 min or so, all online in the second game of life. Can someone help me?

  Information System
  ------------------
  Time of this report: 13/06/2011, 19:40:20
  Machine name: BEN - PC
  Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
  Language: English (regional setting: English)
  System manufacturer: HP-Pavilion
  System model: GC670AA-ABA a6120n
  BIOS: Phoenix - AwardBIOS v6.00PG
  Processor: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz (2 CPUs), ~2.0GHz
  Memory: 4096 MB RAM
  Available OS memory: 3582MB RAM
  Page file: 1690MB used, 5472 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  User DPI setting: 96 DPI (100%)
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  Two monitors

  Display devices
  ---------------
  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1600 x 900 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: G205H (Acer)

  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1280 x 1024 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: NEC LCD7V

  Hello

  I suggest that you have watch the following link below:

  http://forums.developer.nvidia.com/index.php?showtopic=5331

  I hope this helps.